I just purchased a 2.5 hard drive enclosure for my Fujitsu drive that I removed from my broken laptop.I assembled the enclosure, connected it to the USB port on my pc, lights come on on the enclosure, I hear it spinning BUT my PC won't recognize it.Why? FYI, the Fujitsu drive from my laptop has Vista OS on it and my PC is an XP OS.
View 2 RepliesI've got a very annoying problem with XP that I just can't figure out. I have spent hours and hours trying to fix this and posted on several forums to no avail, so any help would be much appreciated.My laptop died last week when I spilt water all over it. The harddrive was not effected and stayed completely dry.I am basically trying to save the data on the harddrive and completely wipe/format it.
I bought a 2.5" SATA > USB enclosure/caddy and put my laptop HDD into the enclosure. When I plugged the enclosure into my spare PC using the power/USB Y cable, the enclosure powers up and the LED light comes on. I can also feel/hear the laptop HDD inside spinning. A message comes up on the PC saying "New hardware found; USB mass storage device".
This is not the usual thread where you "forgot" your password or what not. I was trying to remove the login screen on windows by deleting a few accounts of mine, just to discover that the login screen is still there, only difference is now the username is "administrator" of which I have no clue what the password is.. SO. I tried a bunch of things such as booting from a password cracking image file, with no success (says disk is "dirty") and now I'm thinking that if I booted with a different hard drive and put my original drive in an enclosure I should be able to get into it and make some changes to fix this problem, by maybe erasing or resetting the password.. right?
View 3 Replies View RelatedI'm connecting a 30GB Travelstar Hard Drive via an external USB 2.0 case to my Thinkpad T40 with Windows XP (pro). Windows immediately recognized it. However, the hard drive does not show up under Windows Explorer. I can go into Device Manager, click on Disk Drives, and it does show the new drive there (along with my main hard drive, which is a 80 GB hard drive).
I cannot figure out how to make it show up in Windows Explorer with an Drive Letter assigned to it and thus, how to actually use it.
I've got a very annoying problem with XP that I just can't figure out. I have spent hours and hours trying to fix this and posted on several forums to no avail My laptop died last week when I spilt water all over it. The harddrive was not effected and stayed completely dry.I am basically trying to save the data on the harddrive and completely wipe/format it.I bought a 2.5" SATA > USB enclosure/caddy and put my laptop HDD into the enclosure. When I plugged the enclosure into my spare PC using the power/USB Y cable, the enclosure powers up and the LED light comes on. I can also feel/hear the laptop HDD inside spinning. A message comes up on the PC saying "New hardware found; USB mass storage device". Then about 1 minute later it shows the following message
View 3 Replies View RelatedI'm trying to get XP Home SP2 to recognize a new HD using a USB closure with a brand new seagate Barracuda 7200.7 I've tried every combo of jumper settings different usb ports no good.I get the message that a new USB device is found but then I get "USB Device Not Recognized"
View 5 Replies View RelatedAt first I thought it was BIOS not autodetecting my HDrive capacity. But in the setup screen it indicates the correct size.However, in WindowsXP-My Computer, it still says my harddrive is 20GB rather than 40GB.
View 3 Replies View RelatedI found my motherboard had blown so I purchased a new computer. This one has SATA drives rather than the IDE like my earlier one.I wanted to get some files off the old hard drives so purchased an Adaptec USB 2 Hard Drive Enclosure. It was recognized via plug and play (no drivers for the enclosure needed) and I was able to get some files off. However the next day when I tried to access the drive, it didn't show in Windows Explorer.I removed it from USB plug and tried the USB port next to the one I had previously tried. It recognized the drive and I was able to get more files.
However the same thing happened after I turned it off and rebooted the next day.I was unable to get it to work in either one of the front ports.I then tried one of the back ports, everything worked as before. Again, though, after turning it off, I am unable to access it through any of the 3 ports I've previously tried! What is going on? I still have stuff to get off it and I'm running out of ports.
I just bought me a new SATA 250GB Hard Drive and a external hard drive enclosure. I received the items today and I just realize the hard drive enclosure doesn't build into the way to connect to the SATA 7-pin data connector. All it has is the Parallel ATA 40-pin data connector. Can anyone recommend any external hard drive enclosure that can connect to SATA connector directly. And there is a main reason why I choose a SATA hard drive.
View 1 Replies View RelatedI have a very tired samsung X20 laptop. It has: 1.7 ghz, 2 gig ram, 250 gig western digital hard drive WD2500BEVE - with IDE type connection. Windows xp home with sp3.All has been rosey untill the connection where hard drive is placed onto the motherboard was broken. Not a problem I though as I have an enclosure to put the drive in then connect using the usb. All wired up I turned the computer on, nothing in the drive bay and the same hard drive in the enclosure connected via usb.
View 12 Replies View RelatedI have a primary drive (maxtor) whice xp is running on and a second hard drive (maxtor also) which i have been using for some time for storing files. i had windows xp home and everything worked fine for a long while. recently since i upgraded to xp pro, the hard drive icon for the secondary drive disappears from my computer. i even tried saving stuff to the drive from ms word or something and it is not recognized. usually a restart will solve the problem, but after i let the computer run, (till like the next day) it will happen again. i dont know yet what event causes it to dissapear. i sometimes use standby, but i dont think that is consistent with the problem
View 4 Replies View RelatedI have an HP Media PC M400Y. It is a P4 3.0 Ghz with 1GB ram. It originally came with MCE2002. Last week I upgraded to MCE2005 to use the media extender feature with my new X-box 360.
Here is the problem and some background.
About a year ago, I had installed a second SATA hard drive, Seagate Baracuda 300GB, model ST3300831AS. This drive was plug and play into the motherboard and never had any issues. Before reformating the main C: drive, I moved all my valuable data on the SATA drive.
I then turned the PC off, removed the power and signal cables from the SATA drive. (I'm a novice, and didn't want to take any chances of erasing the SATA drive, while reformating the main C drive)
I was told I could take a hard drive from a windows 98 computer and the person is buying a new Windows xp so I can hook up the win 98 hard drive as a slave to the new computer with win xp so I can drop and drag or cut and past files that they want off the 98 hard drive put on their new computer. Now If their new computer with the win xp on it, if there is an ide cable going to the hard drive and nothing else then I can hook up the win 98 hard drive to the same ide cable as a slave and no problem.
However if the windows xp computer has the hard drive on the ide cable and also the cd-rom then is it ok just to hook up another ide cable to their mother board and hook the hard drive from the windows 98 computer on the end of that ide cable as the master? and by turning the computer off, and then hooking up the hard drive and then turning the computer back on it should reconize the windows 98 hard drive in my computer right away right?
If I would have to put the windows 98 hard drive in the new computer on a seperate ide cable is it ok to have it as master? cause the hard drive that is already in it would be master to but it would be on a different ide cable. I am hoping the new computer just has the hard drive on an ide cable by itself so I can just hook the other one up as a slave and get the files and be done with it. How ever if someone could give me a couple or three scenario's with ide cables and hooking this up I would be very much appreciatetive.
I am trying to install XP Pro. After I boot from the CD everything looks good until it's time to select which HD to install in. It won't recognize it, I've found out there are multiple problems with these new large HDs. People talk about the 137 gigs limit, upgrading the drivers via Floppy, even customizing an installation CD image with an 'OEM' folder below i386. I've tried many things but still can't have it recognized. This box doesn't come with a floppy and I don't have one. Why the freaking dependability on a floppy drive.
View 4 Replies View RelatedI would like to have a go at this slipstreaming thing, since I cannot install Windows XP Pro (it's a retail version from my desktop pc, which I'm now getting rid of) on my Toshiba laptop - it won't recognize the hard drive. I know how to do it, but I don't know which files (SATA drivers) to include in it. The harddrive is new (didn't come with the laptop) and it's a Samsung HM120JI, but it seems to be compatible, since the recovery disk worked fine and I am now running Windows XP home edition.
View 14 Replies View RelatedI have a laptop which after I purchased it and installed my own backup utility and created an image. I then started my windows xp home eddition with the cd and went to the section to redo the partitions. I deleted the partion for the recovery however after doing so it is not shown as unpartiton space. The system should have 80 gb hard drive however the statement above the partion says only 75gb is available to use. This is the same total as on the control panel / disc management. How can I get XP to recognize the entire hard drive space?
View 5 Replies View RelatedWell i tried to install windows on a used 80gig hd. It ended up hanging at the Setup is inspecting your computers hardware configuration. So i searched around a bit and it said my hd needed to be repartitioned so i said instead of that id go out and buy a new 500gig that was only 80 dollars. So i put the hd in and tried with this and it still hangs at teh same screen. For some reason i cannot get passed the "Setup is inspecting your computers hardwear configuration" screen. I then put in another CD of windows but the 64 bit version to try that one to see if it were the CD that were bad. And it went straight into the setup but then did not recognize my harddrive was there.
View 3 Replies View RelatedI am running XP Pro on my computer. On another drive I have windows 7. My computer stopped booting to my XP drive all of a sudden, but it would let me boot to my Windows 7 drive. That lasted for about 3 days. Now I can't boot to either drive. When I start the computer it says there is no HDD. I tried to use the XP disk to repair, that didn't work., so I thought I'd do an XP install. But my hard drive doesn't show up all the time. Or it will show the HDD but upon trying to pick a partition to set up XP in, it then tell me there is no HDD. I get the blue screen of death, and have to manually force a shut down. Other times it tell me that the HDD is RAW, and it needs to be formatted. How can I get the HDD to format? Is there a way to do it through DOS. Sometimes I can't even get to the DOS prompt. The bootup section is corrupt. I need to repair it, but can't if the system doesn't see my HDD.
View 8 Replies View RelatedI've been using an USB enclosure successfully for some time with no problem. I upgraded to a Maxtor 100 gig in the same enclosure. When turned on it does the "plug and play" chimes and it shows up in the device manager as installed and working properly. But it is not shown in My Computer as a drive letter.
Dell dual core, 1 gig RAM, Windows XP service pack 2
I just built my first computer (specs in signature) with a SATA hard drive. I put the windows XP Pro CD and it formatted my Hard drive the it installed windows, but it says that windows could not start due to a hardware configuration problem. Is there some special thing I need to set to get it to boot from the drive or what?
View 11 Replies View RelatedI have a new samsun 120 GB hard drive that I have placed into two seperate external enclosures connected to my dell pentium 4 win XP computer via USB. My computer will not recognize the hard drive. It
powers up fine? Any ideas of what to do next?
my external hard drive all of a sudden stopped showing up in "my computer"
and a can't find it anywhere else. it make the hardware sound when I plug it in but nothing shows up. when I plug it in another port it comes up with a message saying "USb device not recognized. one of the usb device attached to this computer has malfunction and windows cannot recognize it
Well I have an hard drive into a external enclousure but the windows XP of a new CPU do not finish detect it when I connect it. But the same external hard drive work fine in my laptop. I formated my CPU 2 times, but i got the same error of Windows. My CPU has a new motherboard Foxconn M7VMX-K.
The USB ports work fine with my pendrive.
In my computer i can see a new hard drive with a letter (K, whithout data.
The Windows XP Administrator Disk doesn't show nothing about the external hard drive.
My computer has given me problems from day 1. Currently, it fails to recognize my E drive. When rebooting, a black screen appears that says "Secondary drive 1 not found." When restring to an earlier date, a screen says that the E drive cannot be restored because it is either turned off or disabled. The harddrive light which usaully flickers when the computer is working now stays on all the time.
View 3 Replies View RelatedTwo weeks ago I installed win7 on my system,but 3 days ago,bacause of some problems,I decided to uninstall it and to setup an older version.But unfortunately I had many problems to setup another one.Although I had the related DVD in DVD drive,after some seonds it asked for the DVD labeled Win XP.Anyhow finally I could setup win XP 2002,but windows only recognizes drive C with capacity of 100GB and I don't have my other drives as before.For your information it's NTFS.I decided to setup Win7
View 1 Replies View RelatedI added a 120 gig Western Digital USB external drive and used Acronis to create a backup of my hard drive. I then used Windows XP to remove it as a USB device so I could power it off. Now, when I power it back on it is not recognized by XP and does not appear on My Computer or on Disk Management (where I originally formatted it for NTFS). All I get is a sound like a single "KERPLONK" when I power it on.
View 3 Replies View Relatedmy hard drive was going bad so i bought a new one. With my old hard drive still connected to my computer, i installed my new hard drive, and formatted windows xp on it. Everything was running well, until i removed my old hard drive from my computer and whenever i boot up my computer with my new hard drive, i get an error saying "No device found, please insert a boot disk and press any key". the only way i could boot into windows xp of my new hard drive is by a boot disk i created from another computer. Is there any way that i can boot into XP without always having to use a boot disk?
View 2 Replies View RelatedShould I ever use one of the utility programs to wipe my hard drive completely, how do I reinstall Windows XP since the CD driver has been erased? How can you reinstall an operating system that is on CD when you have no driver for the CD player? The reason I am asking these questions is that I might want to give my computer to friend and I want my stuff off of the hard drive and my friend to be able to use the computer.
View 8 Replies View RelatedI've got this old mobo Abit VT7. I want to install XP on it. However, the XP disc doesn't recognize SATA hard drives. So I downloaded official SATA driver from the Abit website http://tinyurl.com/kua5qz and tries to slipstream my XP disc following the instructions set forth here http://tinyurl.com/37anvn . I am not too clear how to incorporate the drivers from the official drivers, but Nlite seems to be able to find the drivers once I pointed it to the top unzipped driver directory, and I selected the XP folder for it. However, the newly created XP disc still fails to recognize the SATA hard drives. Alternatively, I believe I could have a boot floppy which would load the drivers in, then I launch the setup in the XP installation CD via command line. But I don't know how to create a boot disc which has those SATA drivers in.
View 6 Replies View RelatedI have a IBM T40 laptop running WinXP SP2. I have been using this machine for many years, including it's 2 USB ports. Some time ago, I experienced that I had to reconnect my external USB Lacie drive many times before my computer would recognize it. I would get the message that "Windows doesn't recognize the device", but reconnecting it again and again would eventually get it to work.But now things got worse. I can no longer use the USB port on my cable modem (Motorola) because it is never recognized, and the external drive is also never recognized.
View 14 Replies View RelatedI have XP pro, and a 15 gig drive. The drive was wiped and formated NTFS. Wanted to partion the drive. Went to system manager, changed it to dynamic, used windows interface. It would only let me do up to a 7mb partion. How do I change this? I want about a 4 gig
View 4 Replies View Related