USB Hard-drive Enclosure Not Showing Up In OS?
Oct 28, 2008
I've got a very annoying problem with XP that I just can't figure out. I have spent hours and hours trying to fix this and posted on several forums to no avail My laptop died last week when I spilt water all over it. The harddrive was not effected and stayed completely dry.I am basically trying to save the data on the harddrive and completely wipe/format it.I bought a 2.5" SATA > USB enclosure/caddy and put my laptop HDD into the enclosure. When I plugged the enclosure into my spare PC using the power/USB Y cable, the enclosure powers up and the LED light comes on. I can also feel/hear the laptop HDD inside spinning. A message comes up on the PC saying "New hardware found; USB mass storage device". Then about 1 minute later it shows the following message
View 3 Replies
ADVERTISEMENT
Jul 31, 2005
I'm trying to get XP Home SP2 to recognize a new HD using a USB closure with a brand new seagate Barracuda 7200.7 I've tried every combo of jumper settings different usb ports no good.I get the message that a new USB device is found but then I get "USB Device Not Recognized"
View 5 Replies
View Related
Jul 18, 2005
I found my motherboard had blown so I purchased a new computer. This one has SATA drives rather than the IDE like my earlier one.I wanted to get some files off the old hard drives so purchased an Adaptec USB 2 Hard Drive Enclosure. It was recognized via plug and play (no drivers for the enclosure needed) and I was able to get some files off. However the next day when I tried to access the drive, it didn't show in Windows Explorer.I removed it from USB plug and tried the USB port next to the one I had previously tried. It recognized the drive and I was able to get more files.
However the same thing happened after I turned it off and rebooted the next day.I was unable to get it to work in either one of the front ports.I then tried one of the back ports, everything worked as before. Again, though, after turning it off, I am unable to access it through any of the 3 ports I've previously tried! What is going on? I still have stuff to get off it and I'm running out of ports.
View 4 Replies
View Related
Oct 28, 2008
I've got a very annoying problem with XP that I just can't figure out. I have spent hours and hours trying to fix this and posted on several forums to no avail, so any help would be much appreciated.My laptop died last week when I spilt water all over it. The harddrive was not effected and stayed completely dry.I am basically trying to save the data on the harddrive and completely wipe/format it.
I bought a 2.5" SATA > USB enclosure/caddy and put my laptop HDD into the enclosure. When I plugged the enclosure into my spare PC using the power/USB Y cable, the enclosure powers up and the LED light comes on. I can also feel/hear the laptop HDD inside spinning. A message comes up on the PC saying "New hardware found; USB mass storage device".
View 4 Replies
View Related
Mar 11, 2005
I just bought me a new SATA 250GB Hard Drive and a external hard drive enclosure. I received the items today and I just realize the hard drive enclosure doesn't build into the way to connect to the SATA 7-pin data connector. All it has is the Parallel ATA 40-pin data connector. Can anyone recommend any external hard drive enclosure that can connect to SATA connector directly. And there is a main reason why I choose a SATA hard drive.
View 1 Replies
View Related
May 12, 2008
This is not the usual thread where you "forgot" your password or what not. I was trying to remove the login screen on windows by deleting a few accounts of mine, just to discover that the login screen is still there, only difference is now the username is "administrator" of which I have no clue what the password is.. SO. I tried a bunch of things such as booting from a password cracking image file, with no success (says disk is "dirty") and now I'm thinking that if I booted with a different hard drive and put my original drive in an enclosure I should be able to get into it and make some changes to fix this problem, by maybe erasing or resetting the password.. right?
View 3 Replies
View Related
Apr 11, 2010
I have a very tired samsung X20 laptop. It has: 1.7 ghz, 2 gig ram, 250 gig western digital hard drive WD2500BEVE - with IDE type connection. Windows xp home with sp3.All has been rosey untill the connection where hard drive is placed onto the motherboard was broken. Not a problem I though as I have an enclosure to put the drive in then connect using the usb. All wired up I turned the computer on, nothing in the drive bay and the same hard drive in the enclosure connected via usb.
View 12 Replies
View Related
Feb 24, 2008
I just purchased a 2.5 hard drive enclosure for my Fujitsu drive that I removed from my broken laptop.I assembled the enclosure, connected it to the USB port on my pc, lights come on on the enclosure, I hear it spinning BUT my PC won't recognize it.Why? FYI, the Fujitsu drive from my laptop has Vista OS on it and my PC is an XP OS.
View 2 Replies
View Related
Jul 30, 2009
I have an external usb hd enclosure with an ntfs 320 gb IDE drive inside it.. when I connect it to my PC it shows up as local disk but I would rather it show as a removable disk so I can properly eject it. How would go about doing this?? thanks! (i have xp sp3)
View 1 Replies
View Related
Jul 20, 2008
I have had someone working on my computer and now I have just noticed that my 2nd hard drive is not showing in my computer I have looked in belarc and it shows there I have looked in bios my main drive shows but not my 2nd. I am thinking that something is not connected have I got to go inside and operate?
View 5 Replies
View Related
Apr 26, 2010
I have 80GB hard drive on my computer. I only have 31GB free space. My total size is 74.5GB. So I'm assuming the 5.5 is made up of programs needed to run the computer. I have deleted all my music video and audio files/folders which were taking up even more space. I've tried defragmentation, emptying the recycle bin etc etc. I've uninstalled some rarely used programs. In my Program Files there are 49 Items taking up 34.3GB of space. Surely this is too much, I do have Nero and Roxio which take a lot of space. Looking at 'Control Panel' I see 'Microsoft .NET Framework 1.1', 'Microsoft .NET Framework 2.0 Service Pack 2' and also 'Microsoft .NET Framework 3.0 Service Pack 2'. Do I really need 1.1 and 2.0 if I have 3.0
View 14 Replies
View Related
Feb 14, 2009
My external USB hard drives always used to show up in either My Computer, or Windows Explorer's double pane view in Windows XP. Although they still show in My Computer, they do not show up in Windows Explorer anymore, unless I select them in My Computer First - and then choose the "Folders" selection. do Not give me the standard answers which are for External drives that don't show up Anywhere .. because the drives DO show up in Disk Management, and they DO show up in My Computer, and this is Not a new drive that needs to be formatted.
View 1 Replies
View Related
Jul 16, 2009
If I double click the C drive or D drive, Its showing Properties. Instead of opening the drive.
View 2 Replies
View Related
Mar 5, 2010
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies
View Related
Mar 9, 2005
Can anyone help me on my little problem? My computer at home has OS Xp and a few programs installed on the c drive which has a partition size of 10 gb, now all the programs should be using about 3 gb of space but it shows that 7 gb is in use. I check the c drive for temp and chk files and there are none. Select all the files including the ones that are hidden and take properties to find out the space they are on and it shows that it is 3 gb. What can possibly be holding back the other 4 gb and is there a way to free the space without formating the computer?
View 8 Replies
View Related
Mar 6, 2008
hi..found a computer in the garbage and i wanna get it going for my kids.At first it started in safe mode only.I tried to do checkdisk and i restarted now i get a bunch of messages saying missing files such as windowssystem32tfs.sys and isapnp.sys and agp440.sys. Like i said i have no software or anything for this computer but i do have a windows disk for another computer.How hard would it be to wipe the hard drives out,start over and find all my drivers?
View 9 Replies
View Related
Mar 16, 2010
I have a Lenovo Thinkcentre PC, with windows XP. I'm having a problem with the PC in that although I use an external hard drive to make sure the PC hard drive is not full and have very little saved on the actual PC, when I look in properties on the 'C' drive by right clicking on the 'C' drive icon, it is showing that there is 118GB used and only 26.1GB free space (total capacity 144GB). But when I go into the 'C' drive and manually explore all the different folders, there is nowhere near this much space used. Probably less than 5Gb that I can account for. I think it is drastically slowing my system, and also every few days I get a message that my computers performance is degraded and that I should defragment. I was under the impression that you didn't need to defragment anywhere near this frequently....
View 14 Replies
View Related
Aug 5, 2010
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
View 6 Replies
View Related
Oct 13, 2009
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 Replies
View Related
Dec 5, 2007
using XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
View 3 Replies
View Related
Jul 2, 2008
i have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
View 5 Replies
View Related
Nov 19, 2007
I am going to try to explain this as best I can. This is a friends computer. She has this sewing machine that has a memory stick that she plugs into her computer. As you can see on the 1st screen shot "removable Drive L" is NOT present. It used to show but it does not show anymore. She sad that she clicked on "EJECT DISC", and now Removable Drive L " does not show UNLESS she has the memory stick plugged in as you can see in the 2nd screen shot. So she is wanting to know how she can get "removable Drive L" to show up again, like drives. G,H,I and J. I am asking her for more information because now that I look at these screen shots, I see in the 2nd one that she actually is showing "6" Removable drives.
View 8 Replies
View Related
Jul 20, 2008
I have a Dell (Intel Pentium 4, 256MB RAM)Running Windows XP Home Edition.I recently had a Spamware/Virus situation (which I'm still working on fixing, with the help of instructions i found in the Spyware forum - Thanks!) which has caused a whole whack of little problems. I've figured out a couple (re-enabled Registry Editing; re-enabled Task Manager; Re-enabled "Display" in control panel), but there are 2 i can't figure out:When I go into "My Computer", my C: Drive is no longer listed.The "Log Off" button no longer appears on the Start menu. Only the "Turn off Computer" button is there.
View 6 Replies
View Related
Feb 18, 2007
added another hardrive to pc and it shows up in explorer but not in bios so i can,t set it to start,
View 6 Replies
View Related
Sep 11, 2006
Im running XP SP2 and when i restart my pc my 2nd DVD drive does not show up in "my computer" but for some reason when i shut down the PC and then fire it back up there it is this something that can be fixed or am i going to have to shut down everything as opposed to restarting from now on?
View 3 Replies
View Related
Oct 11, 2005
Cd rom drive letter not showing in control panel. No recordable device found on system. Running xp.
View 2 Replies
View Related
Oct 13, 2008
I had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
View 3 Replies
View Related
Oct 7, 2010
We have Windows XP Home Edition 80 GBCan we copy entire hard drive to an external hard drive?
View 36 Replies
View Related
Oct 5, 2006
Can anyone tell me whats the difference between a ATA hard drive and a SATA hard drive?
View 2 Replies
View Related
Dec 24, 2008
I installed Windows Vista on a slave drive of a computer which has Windows XP as its master drive. I have now taken out the har ddrive with Windows Vista on it, but it still gives me the choice of booting from either Windows XP or Windows Vista.I edited the Boot.ini file, but it didn't have Windows Vista listed as a bootable option, so I left the Boot.ini file alone. It currently looks like this:;
;Warning: Boot.ini is used on Windows XP and earlier operating systems.;Warning: Use BCDEDIT.exe to modify Windows Vista boot options.
View 4 Replies
View Related
Jul 10, 2006
No matter what I do, when I change the properties of a single directory to either show or not show hidden files and folders, that property then changes in every single directory on the whole drive. I do not click on "Apply to All Folders", I just go to the directory of interest and change the button in Folder Options>View and press "OK". Is there a trick here? Basically I want some folders to show hidden folders, and others to not show them. Right now it's either all or nothing! Again, I am NOT pressing apply to all, which I know will apply all view settings to every folder.
View 4 Replies
View Related
