My computer won't reboot. It started when I tried to update windows to sp2 and it had an error so it couldn't finish the update so it uninstalled whatever it installed. I rebooted and it goes into a loop, first the manufacture logo, the windows xp logo and it goes right back to the manufacture logo and starts that process again. I tried to go into safe mode and even the last best configuration to start and it still goes into this loop. What should I do? I don't want to reformat if I don't have too.
XP reinstall won't validate so that I can get updates. It is a legal copy and I had no problem activating windows. However when I tried to validate it for updates it keeps telling me there is an unknown error and validation could not be completed.
When A windows XP SP2 start up , a error box prompt up show winlogon.exe error, I have capture the debug log , can you let me know how to solve out this problems. Also I have enclosed Hjask this log for your ref, I hope you advice how to solve out this problems.
SAFE MODE Logfile of HijackThis v1.98.2 Scan saved at 12:42:17 AM, on 7/9/2005 Platform: Windows XP SP2 (WinNT 5.01.2600) MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
I have and Acer Netbook Aspire One A0A110. I'm trying to run Disk Defragmenter and an error pops up every time when i run it. The scan has been cancelled because an error occured in file :C:ACERPreloadCommandAlaunchXCoadeTracerCoadeTracer2008-11-26-28-39.log. I can't find out what is causing this. Acer sucks because they don't come w/software, but is avail for purchase.
Getting an error message that goes STOP: 0x0000008E. Everytime i try to shut down or restart. I was also getting alot of Buffer Overflow Blocked warnings from mcafee before i uninstalled and used SpyBot Search And Destroy which has cleaned a couple trojans off of my comp that mcafee did not find.? Also everytime i open a program or even I.E. A seperate window opens up thats all text, And if i close that window the whole program closes.
Windows XP and every time I log on to my desktop, the first thing that pops up is an error box. This is what it says: RUNDLL Error loading C:PROGRA~1NEWDOT~1NEWDOT ~1.DLL. The specified module could not be found.OK.
I get this almost everyday, I even restored the laptop to how it was out of box and it keeps crashing. Here is the error.MULTIPLE_COMPLETE_REQUESTS ***STOP: 0x00000044 (0x862df368, 0x00000D60, 0x00000000,0x00000000)
Attempt to reinstall windows i have 2 striped drives, i need to reinstall my raid drivers but every time i try to install the drivers it always says that it can't read it, i finally got it to read but then it says this file caused an unexpected error and the installation fails and i'm back at my original installation of windows.
I notice i have had this problem for the past 2 weeks and today by pc restarted itself out of no where.Can anyone explain why cause i ran virus scans and i'm pretty sure i'm clean.
Alright this has left me without my dell for a few months now and its driving me nuts.I was trying to format my computer,and than install winxp.i wiped it,and tried installing winxp from my cd, Everytime i try to install,it says it couldn't be installed due to not enough memory left,or my disc being corrupted,it cannot be corrupted because i have installed windows xp on this computer using the same cd.
I'm new here. How's everyone doing? I get this error message just randomly whenever I'm on the computer or not: http://img.photobucket.com/albums/v149/spiralout987/error-msg.jpg. I don't know what it is, what it's for, what's wrong with it, etc. Anyone have any idea where I can get more information as to what this error means? And what program is asking for the file that can't be found? Please help! I don't want to reformat my computer to get rid of this message.
I am working on a Gateway solo 9300 and installing xp. there are no peripherals attached. I am receiving the error INSTALLATION FAILED D:I386asms. It is telling me: the file "asms" on windows xp home edition service pack 2 cd is needed. Type the path where the file is located and then click okay.I enter d: ( my cd drive) and nothing. it says: globalrootdevice cdromoi386 in the path line. nothing. I have read as many posts here as I can and it is stopped in the middle of the installation at 39 minutes waiting for me to become an instant genius and solve it.
When i turn on my pc,when the welcome screen shows up b4 entering windows 2 pop sounds come up and i get a msg saying windows can't open C:PROGRA~1INSTAL~1{ACE66~1 setup.exe -rebootC:PROGRA~1INSTAL~1{ACE66~1 eboot.ini l0x9 then another same msg saying windows cant open C:PROGRA~1INSTAL~1{D5068~1setup.exe -rebootC:PROGRA~ 1INSTAL ~1 {D5068~1) eboot.ini -l0x9 this never happend with and i didnt erase anything or remove any program.
Re-install windows xp. I boot from xp cd but only get as far as pressing f8 to accept the licensing agreement. The next page says that the installation cd cannot be read. I have used this cd in the past and it has worked ok.Do i just need to get hold of another copy of xp?
Go to Download Link a file any website i'm getting some hang time and then an error. I have downloads enabled in the tools internet options security tab menu and am unsure why i'm getting this problem.
Installed and later on uninstaller a program. After that i had to restart my computer and got the following bsod: stop: 0x0000007B (0xBACC3524, 0xC0000034, 0x00000000, 0x00000000).
I have DV camera connected to PC. I am running PINNACLE STUDIO 9. When camera is switched to ON, the BING BONG occurs twice, and PINNACLE STUDIO 9 then runs. AAAARRRRGGHH This is from within the WINDOWS option box, which appeared whenever the DV camera was switched ON.
A 60 day trial for Microsoft office Used but it expired so I tried to install Office Professional I didn't like it and removed it. I have since downloaded another 60 day trial for office and it works however I can't open documents by double clicking on them I get the following error message:c:documents and settings HP_administrator desktop is not a valid win32 application.
I get this cyclic redundancy check error when I try to copy files from a DVD-RW onto my hard drive. I burnt said DVD about two years ago using Cyberlink DVD Solution Power2Go. I get this error with mulitiple DVDs, but not all of them (I've got five and I get this error with only three). Also, I get the error with some files, but not others (on the same DVD). I really can't lose these files! My guess is they were burnt wrong, but I'm really not sure. Is there any way I can recover these files?
I have ms bundled on windows XP my hp pavilion 1335w. I have saved a lot of word processing documents for my new (3 mos.) job. Now when I try to re-open them for revisal, or even just to look at them, I get a msg in a small window that says "Works task launcher cannot open the file you selected. It may have been either moved or deleted." If I can't get to some of these, I will lose my job! And I don't even know where to go for help, this is the first place i've tried. Can someone either sove the problem, or tell me when I can go for the answer?
I am trying to re-install a game on my computer. Due to a good virus attack, I was forced to reformat my hardrive and re-install Windows XP Pro. When I tried to re-install my son's game (one of those Sesame Street educational games) I get an error message saying that there is insufficient memory to run the application-- The title of the message box is "Can't run 16-bit application"; there is no error number. I have Googled for it, but the only answers I seem to get are for the autoexe.nt file being corrupt; however, my specific problem is not listed in the symptoms.
I have a dell laptop inspiron8600 with Windows XP and SP2. I recently get the same blue screen error every time i start my computer.IRQL_NOT_LESS_OR_EQUAL STOP: 0*0000000A(0*F89181C0, 0*00000002, 0*00000001, 0*804D9BBA) I ran the dell dianostic test for blue screen errors but everything was fine. Does anyone know the reason for that problem and/or a solution for it.
My computer says that my DVD and CD drivers are missing files and may be corrupt, i wonder if anyone knows how i can find thes files again or has any info that can help me.
My Dell Inspiron 510m laptop comes up with that message every time i startup the computer. I can't even log in so can't do anything about viruses. I really have no idead about what to do.
Starting benq 500E scanner I encountered the following message: read image data failure 2882:1118. I know I've got the right driver installed, because it's the newest version and it always worked.
Try to install new software Turbo Tax and the software for my new Epson Scanner. I get this application error message: This application cannot run. That is all it says. I've had this computer for three years and have installed software many times with no problems. There is plenty of room on the hard drive. I have tried installing in safe mode. I have tried to restore back. I have done a defrag.
Trying to get the Photosmart C6280 drivers to install for the past few days. Whether it's installing from the CD or downloaded drivers, I still get the same message. Right before it starts to install the drivers, it says that some files need to be deleted and that I have to restart. So, I restart, and the installer comes back up, only to tell me to restart again. I got past this when I ran the installer in safe mode, but I was unable to start the Print Spooler to continue the setup.
When try to open any program via the normal shortcuts, I see an error message reading Application Not Found. In order to use anything, I must go find the program on my hard drive and then choose the program responsible for running that program. I've tried creating new shortcuts, but to no avail. How can I get back to normal? I'm running Windows XP.
I'm the computer guy in a dentist office and we use shick CDR camera, after we upgrade from xp home to xp pro we started getting the error message "Error Opening Windows Model (WDM) device.
I uninstalled Windows Defender ages ago as soon as I realized that it had just been hogging the CPU. For some reason, an error message pops up on startup: "The application failed to initialize: 0x800106ba. The problem caused the Windows Defender service to stop. For information on how to manually start a service, see the Help and Support center."
Brief synopsis:I recently did a new Windows XP install (after a crash). Now I cannot get my printer to install. The printer is a SHARED printer (HP Deskjet F380) on another machine on the network. The printer was previous installed on this machine before the crash and reinstall of WinXP.After nearly 2 hours on the phone w/ HP support, it's been determined (by HP support) that somewhere in the XP install, a missing XP driver is keeping this install from properly allowing any printers to be installed. The printer will 'appear' to be installed, but any attempt to print brings an error saying printer drivers aren't properly installed.
