I can't burn any CDs.I get an error, still.i have tried a slower CD speed, a different CD type, a new cd burner and none work.When i got the new cd burner it worked fine, for about 3 days then it stopped again.
View 8 Replies
Ive got some burning software by the name of MySonicDVD on the PC but when trying to load it up comes up DMA disabled, well ive done everything to enable it no joy so thought ive got Nero 5 somewhere, dug that out installed it and tried to use that, but it first came up couldnt be used as not correct bundle package (or something similiar), then manage to get sort of somewhere but it didnt like the fact it was an .avi.Now nearly 7 hours to burn a dvd hmmmm, ive not got much of a life but a little bit of one to not waste 7 hours a time.
View 3 Replies View RelatedI know it's maybe the wrong NG, but could you help or direct me to the right one.This morning I tried to burn data to a DVD......only burnt the intro then stopped with a error.Tried again ... same thing...Virus checked, spyware checked, all OK Did a sfc scannow, did a system restore to 2 days ago.Tried again, same results.Un-installed Nero and removed all traces from registry.Reloaded Nero.Tried again, same results.
I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-I am adding the error message, I know its long but in other posts it has been said that not enough info is given.Nothing unusual happened at shutdown last night or bootup this morning.Problems seem to start at 8:48:15 AM #21 I don't know how to interpret this data
I run Windows XP SP2 (Which is completely up-to-date) and have a Toshiba CD-RW and DVD-RW combi drive. I've used it store backups of my files and recently everytime I try to record to any type of CD an error message appears saying the disk is either full or unuseable and to try another disk which I have I've also tried disks from different manufacturers and changed the recording speed to minimum but the device still displays the error.
View 7 Replies View RelatedI have a Desktop which has Windows XP installed. I have some Favourites music DVD`s saved in Real Players Favourites Section,but I am having great difficulty in burning them on to a CD. I have been using Nero to burn other things in the past, but I can not find 'Real Player Favourites' using Nero`s 'Add' Section.
View 6 Replies View RelatedI have a folder of movies that I want to archive and burn to dvd to make room on my hard drive. Whats the best way to do this?? Should I make a sinlge rar archive and then burn to a bunch of dvds?? Is there a better what of doing this?
View 9 Replies View RelatedI am the administrative user and real player works just fine, however my 2 limited accounts cannot burn, it keeps saying burner drive not located
View 6 Replies View RelatedMy friend has a computer he bought 2 years ago which has a dvd player in it. He did not realize the player was also a dvd burner. I bought a blank dvd from Walgreens and tried to burn a dvd data disc. An error message came up which said the disc was the wrong media. Is it possible the disc is made for newer drives and I need a slower media or something? What do I look for?
View 8 Replies View Relatedwith this issue I'm having, I am using burning tool " Nero 7 Ultra ", when burning files from from my hard drive I get the message " DMA-driver error ", even if I burn at the fastest or the slowest speed ( simulation mode or not ). Here is the report
1C82-0000-19E5-MAAX-4008-4409-****
1A41-0000-0000-2549-3452-****
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 5:48:21 AM
ahead WinASPI: File 'C:Program FilesNeroNero 7CoreWnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.5.7.0
Internal Version: 7, 5, 7, 0
(Nero Express)
Recorder: <PIONEER DVD-RW DVR-111D>Version: 1.23 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 1 - 7.5.7.0
Adapter driver: <IDE> HA 1......
Old HDD really fricked up. Bought new HDD from NEWEGG & I cannot install XP on new hdd. XP cd loads and when it gets to partition screen, all four lines say "Unknown disk"-"There is no disk in the drive". BIOS recognizes the new hdd but XP cd does not. System: Dell XPS Gen 5 3.0, 4GB RAM, 250GB BARRACUDA 7200RPM HDD (ALL COMPATIBLE)
View 4 Replies View RelatedHelp with Unknown Device (media reader)wont find anything related to this
View 9 Replies View Relatedmy computer is capable of reading DVD's and Cd's and i have also burned normal CD's with it,does that mean that i can burn DVD's too? like data DVD's? what program can i use?
View 12 Replies View Relatedsomething really weird is happening to my pc.in my hard drive, with a size is 60 gb, i have a folder, inside my docs, that says that i have 42 gb of things. but when a look inside that folder there is nothing. i saw in each folder inside documents and setings and nothing.i saw in temps folders inside of windows folder and i ran the windows utility to clean up and mantainance of my hard drive and i got nothing as a result.i tried crap cleaner, and its usefull, but the problem persist. i dont have a lot of apps installed or mp3 org jpg, files, so i dont know how to start.
View 6 Replies View RelatedHaving major problems with my Laptop. Sometimes unable to open a window, redirected to unknown sites, inundated with pop-ups, unable to uninstall Microsoft Office 2003. Now I am unable to use my wireless connection.
View 5 Replies View RelatedHow can I get rid of RUN DLL? I get this message: Error Loading C: Progra~ |MYWEB ~|ar2.bin MYSBAR ~|.DLL on my desktop at startup. I went to Internet Explorer>Tools>Manage Add-Ons and disabled the MYWEB program. Then I went to control panel>Add or Remove Programs and tried to uninstall the MYWEB Popular Screensavers program but it would not let me. It said the specified module could not be found. I'm running Windows XP Home Edition.
View 9 Replies View RelatedGetting a strange error in Dell Inspiron 9300, running some version of XP, and that's all that I know.
When you turn on his computer, you see the Dell startup-screen for a second, and then it automatically brings you to the prompt that says "We apologize for the inconvenience, but Windows did not start successfully." window. There are obviously 5 options: Safe Mode, SM with Networking, SM with Command Prompt, Last Known Good Configuration, and Start Windows Normally. Each one of those brings me to the blue screen that says:
STOP: c000021 Unknown Hard Error
SystemRootSystem32
tdll.dll
I searched on other forums, and it seems that this is what people have done to fix this: either try to Repair Windows, reinstall Windows, manually replace ntdll.dll (if they can actually get into Windows, which I can't), or do something with their memory cards, I'm not sure what.
Are those approaches I listed correct? And 2nd, I don't want to have to mess with my friend's memory if I don't have to.I'm not too much of a tech person. I do, however, have my family's Windows XP Home Edition install CD with me.if I put that into his computer, and try to repair Windows, would that work?
problem with internet explorer. when i close ie, it shows an error message like this, "The instruction at"0x0291341a" referenced memory at "0x029c2b18". The memory could not be read". Then after i just left with ok button to go with. if i click 10-15 times on the same till that it will continuously shows message and then after it works well. But this message bugs me all the time when i close ie.
View 2 Replies View RelatedGetting unknown Error: loader couldn't initialize?
View 7 Replies View RelatedI have three (3) questions:1. When I'm closing down Windows XP (Home Edition), I continually receive an error showing "XtkU.exe" cannot. I have checked everywhere and cannot find out what this file is associated with. In addition I have gone through my system and purged all files associated with this executable from the registry. They pop right back in there with a system restart. I'm lost and confused now because I don't know what application uses this file.2. When closing down I receive the same Norton error message another user gets."ccaps.exe" at signoff. I will try and remove Norton to see if that works. 3. The user "quick switch" does not work any longer. I am not sure what is causing that either. Do you think it may be associated with the WtkU file?
View 2 Replies View Relateda few hour ago i was playing a movie with real player then a message came up asking me to insert the serverice pack 2 disk or the comp will became unstable.because i dont have it i clicked cancel.the the comp begin to load some unknow program and became very slow. so i switched off the power . and now it kept restarting even if i try to enter safe mode.
It also say "Stop:C0000219 unknown hard error"
XP reinstall won't validate so that I can get updates. It is a legal copy and I had no problem activating windows. However when I tried to validate it for updates it keeps telling me there is an unknown error and validation could not be completed.
View 4 Replies View Relatedhave a great aussie concert, but it's in australian format disk can copy it and burn it back to dvd, and aussies can watch it, but when I send copies to USA, they can't see it..can anyone tell me how to copy/ configure/ find a program that will make it viewable to o/seas watchers? I run DVD Express to view DVDs.LG burner, and Nero to copy/burn. it's frustrating as I have heaps of good aussie videos that Americans can't see I'd appreciate any guidance here.
View 6 Replies View Relatedi can send files to the CD drive, but when I open an explorer window and try to use the "CD Writing tasks" on the left hand side (i.e Write these files to CD, Erase this CDRW etc...) nothing happens. The funny thing is, if I go back to "My Computer" and right click on the CD icon to perform a task, it appears to work.
Dragging files to an open CD explorer window also causes the window to close (although the temporary files are still copied across and a notification that there are files ready to be written to CD is displayed).
I am posotive the CDRWs and my CDRW drive are okay, as they work when using Nero. Its just an annoying problem I would like to sort out if anyone can help!? The probalem started before I installed Nero, so I dont think that has caused a problem.Some hardware specs below if they are needed:
Microsoft XP Home Edition
Version 2002
Service pack 3
HP Pavillion
Intel Celeron CPU 1.80GHz
1.25GHz of Ram
CD Drive:
CyberDrv CW058D CD-R/RW
Driver version 5.1.2535.0
Driver Date 01/07/2001
are windows XP updates available on to download and burn to CD ?
View 2 Replies View RelatedWhen I copy to a CD it states files were copied to a temporary file folder. However, that folder no longer appears for me as it did previously. I had this problem earlier and received helpful resolution at this site but can no longer find my previous post.
View 9 Replies View RelatedCould someone tell me how to burn a DVDRIP-DIVX file to a DVD-RW disc i've already tried and nothing happens i tried to burn the disc on the windows media player, and the realplayer beta, i've already put my disc into the compact disc rewritable device to burn and it keeps saying device D and Device E cannot be used to burn a DVD content it also says choose the device the options where video CD/ super video CD/ and DVD video.
View 2 Replies View RelatedI have observed this since i had my PC, while burning a CD, my computer would suddenly restart as is the reset button had been pushed,sometimes even while reading a CD (even tho i havent observed this in a while) and even sometimes as soon as i was in the BIOS (that was quite unconvenient for trying to reinstall Windows I admitt) The problem is that, since that problem appeared (that's indeed since i've had this homemade PC), i changed the CPU, the motherboard,the burner, the alimentation, the RAM, the graphical card, the modem, i mean, everything besides the floppy disk reader thing, i also installed another Windows XP (SP1 indeed, even tho it was badly burnt so whenever i install it there is dll's that won't be installed) and in spite of all these changes, i still get those reboots while burning, and that's quite annoying mostly that it kills your CD's. so what can it be due to? i'd really appreciate an answer from anyone who might have one, cuz i've had this problem for 2 years now and now that i'm getting out of room on my hard disk and need to back up lots of things on CD's.
View 14 Replies View RelatedI am fairly new to the world of WINDOWS XP but it is a small step away from the Mac Os Tiger in Simlplicity. I bought a barely HP DV1315cl (google the name for full specs) which by the way I am VERY happy with to replace my "vintage" Ibook 800mhz. You know how you can drag and drop data files in Windows Explorer for Writable and Re-Writable CD's? I was wondering if you can do the same thing with DVD's. Also when I pop-in a DVD +/- either or they are reconized as a CD with 0 bytes. Is there like a plugin or something included with software E.g. Nero to enable this
View 7 Replies View RelatedXP SP2 with Nero + Verbatim DVD-R: Used this to burn a DVD 3.9GB it burned fine. Data Verification completed successfully. I then checked the compilation using my computer and everything was dandy super BUT to double check I put the DVD in my laptop DVD drive nothing, disc was not even recognized.
View 10 Replies View RelatedI own a WindowsXP computer. I am trying to learn how to burn CDs. I "seem" to be able to assemble my playlist, drag,drop, and pick a new playlist. I "seem" to be burning a new CD after installing a blank 52xmulti speed disc. My troubles begin after about 91% of the burning process is completed. The process will stop and inform me that the "write-speed" is incorrect! How does one go about changing to the correct speed? What is the proper sequence in CD burning so that I do it the same way every time?
View 6 Replies View RelatedI have recently gotten a DVD Dual format and Dual Layer drive. I have been able to burn a DVD movie and a data disk, but since then I have not been able to do any more movies.Im using the Sony DVD RW DW-G120AFirmware is MYR5Driver is 5.1.2535.0 from Microsoft (windows xp pro drivers)Using Nero Vision 4.50.24It will transcode the movie and then go to burn but then it will tell me there isnt enough room on the media. Im using Memorex DVD rated for 16X speeds. I have tried using the default settings which auto sizes the video for the media size and it fails (the size meter says is just fits). I have tried using the "standard play" setting, which drops the size down to 300 megs less then the total DVD size and still nothing.
View 12 Replies View Related
