Unknown Application File - Norton Error Message
May 3, 2005
I have three (3) questions:1. When I'm closing down Windows XP (Home Edition), I continually receive an error showing "XtkU.exe" cannot. I have checked everywhere and cannot find out what this file is associated with. In addition I have gone through my system and purged all files associated with this executable from the registry. They pop right back in there with a system restart. I'm lost and confused now because I don't know what application uses this file.2. When closing down I receive the same Norton error message another user gets."ccaps.exe" at signoff. I will try and remove Norton to see if that works. 3. The user "quick switch" does not work any longer. I am not sure what is causing that either. Do you think it may be associated with the WtkU file?
View 2 Replies
ADVERTISEMENT
Aug 21, 2006
the error that pops up after loading is related to svchost.exe - Application Error ( The instruction at 0x500bcb9a referenced memory at 0x00000000 the memory cannot be "read") I'm pretty sure it's not a virus. I did a full system scan with Kaspersky 6.0, Ad-aware pro and spybot.
View 7 Replies
View Related
Mar 30, 2007
when booting up my computer and after logging on I receive the following error messages before the windows screen comes up:
1) regedit.exe - The procedure entry point PrintDlgexw could not be located in the dynamic link library comdlg32.dll.
2) hpppt.exe - This application has falied to start because WNASPi32.dll was not found. re-install application may fix problem and last but not least
3) The procedure entry point PrintDlgexw could not be located in the dynamic link library comdlg32.dll
I do not know why these error started all of a sudden and do not know how to fix them. By clicking on OK for each error message I eventually get to my windows screen and can do everything, print. open documents, check outlook and go to the internet. I have an operating system Windows XP on a DELL optiplex gx280 system.
View 2 Replies
View Related
Apr 4, 2005
Try to install new software Turbo Tax and the software for my new Epson Scanner. I get this application error message: This application cannot run. That is all it says. I've had this computer for three years and have installed software many times with no problems. There is plenty of room on the hard drive. I have tried installing in safe mode. I have tried to restore back. I have done a defrag.
View 8 Replies
View Related
Jan 2, 2007
I uninstalled Windows Defender ages ago as soon as I realized that it had just been hogging the CPU. For some reason, an error message pops up on startup: "The application failed to initialize: 0x800106ba. The problem caused the Windows Defender service to stop. For information on how to manually start a service, see the Help and Support center."
View 6 Replies
View Related
Dec 12, 2008
When trying to install SP3 I get the error "The file c:windowssystem32driversusbstor.sys is open or in use by another application." I know that usbstor.sys is something like the service that prevents USB drives from auto-installing or auto-running, but isn't that completely irrevelent if I'm just trying to install SP3?Anyway, I've pretty much tried closing all other apps, and even tried to install in safe mode;
View 1 Replies
View Related
May 7, 2006
PC wont boot up any more , it says there could be a currupt or missing file , it says its config system and says it might be able to repair the file using the install disc. i have a System Recovery CD-ROM
View 1 Replies
View Related
Mar 7, 2006
I have this strange problem after I re-installed Windows XP Inernet Explorer 6 is my default browser. Suddenly when I launch it nothing happens. No page opens, the IE logo on the top right corner of the page doesn't move but IE doesn't hang up, if I close it, it closes normally. Also, when I click on System Restore a window opens up with nothing on it - it is completely white and blank. On the top left corner (where the system restore logo is shown) I see a logo of Windows XP's 'Unknown Application'.
View 13 Replies
View Related
Aug 27, 2005
I cannot figure out hpow to use win xp pro's backup utility. I have folowed the instructions, but always get an error meassage: The backup file name could not be used "D:ackup..bka' Please be sure it is a valid path and that you have sufficent access. Ok, what's happening here? I downloaded a demo copy of Nero 6 and instantaly made a backup. Why is the utility built into xp pro giving me a problem?
View 4 Replies
View Related
Mar 12, 2005
In Win XP when I try to load all my older C.D. programmes, I get Error Message:- 16 Bit Windows Sub System. C/WindowsSystem 32Autoexec.N.T. The System File is not suitable for running MS-DOS and Windows Application. Close to terminate aplication. Having looked up other methods of resolving the problem I still can not get any results.
View 3 Replies
View Related
Aug 17, 2005
I am running Windows XP with SP 2 and when I try to load certain software that use to run on an older PC with 98 SE I get a message saying 16 bit windows subsystem C:WINDOWSSYSTEM32AUTOEXEC.NT. The system file is not suitable for running MS_DOS and Microsoft Windows applications. Choose 'Close@ to terminate the application. What does this mean and is there a way round this as some of the software used to load and work okay on this PC but has been uninstalled but cannot now ne installed. This happens with a number of software packages.
View 7 Replies
View Related
Mar 12, 2010
Since 10 days ago, every time I log on to Windows XP (Pro, SP3), I get an error message: "Windows cannot open file 6beff9.rbf. Find suitable program." I would like to delete it to remove this message. Google says it is a type of temporary backup file saved in Config.Sys folder. But I can find neither the file nor such folder using search on my computer (including system, hidden files/folders). How do I get rid of it?
View 10 Replies
View Related
Jan 6, 2005
Can someone tell me why, when I open a notepad file, whether from notepad or from Start Documents or what have you, I always get an error message: "Windows cannot find [file locationfilename.txt]. Make sure you type the name correctly, and then try again. To search for a file, click the Start button, and then click Search." However, the file does open in notepad behind this error message and I am able to view it, edit it, etc.
I would like this error message not to appear every time (it is really just an annoyance to cancel it every time but after a couple of years I am tired of it) so I tried to find this answer in the archives but to no avail. However, I saw that it was recommended by more than one tech guy (or gal) to save a "hijack this" file in notepad, so I followed the instructions and did that just after my latest error message... The "hijack this" copy of the notepad file follows, and if you see anything else that I should make note of please let me know....
View 3 Replies
View Related
Apr 4, 2006
When a virus problem was found, my friend eliminated a file when Norton advised him to do so . After deleting the file he now receives the below error message each time the computer is booted. crogra~1softwar~1soproc.exe
View 1 Replies
View Related
Jul 2, 2005
When I choose the default destination file name, I get error msg: 'backup file name could not be used. Please ensure it is a valid path and that you have sufficient access.'I've tried minor variations on the default without success. PS- I AM the Administrator.
View 7 Replies
View Related
May 18, 2005
At startup I get a pop up Runner Error message saying: Runner file name (Upates from HP.exe) lacks a ___ (the app ID Seperator). Where I have typed "___" it is a symbol I cannot duplicate with my keyboard. It looks like " with a - underneath. Is this update from HP important? How do I fix/eliminate the problem/pop up message?
View 12 Replies
View Related
Apr 21, 2007
I turned on my computer and windows didn't start up. It didn't even go into post or anything. What came up was that there was a corrupted file. winntsystem32 configsystem. I know this means that that file is missing but I cannot fix it because I don't have my Windows XP CD nor do I have a Startup Disk so I could recover the register. What I have done was, got a BART CD and booted from it and windows loaded but I don't know how to fix or find the corrupted file.
View 1 Replies
View Related
Jan 26, 2005
what i would like is a step by step of how to repair this problem i have tryed copying this file from the xp disk to copy ntoskrnl.exe as follows e:where e is my cd drive e: copy e:i386toskrnl.exe c:windowssystem32 and it tells me file cant be found but when i do a dir e:i386 it gives me the file.
View 1 Replies
View Related
Sep 13, 2005
I have a problem with copying large files (50MB+): Both command line command "copy /B" and copies in Explorer of large files always risult in a slighly different (corrupt) copy without generating any error message. The number of different bytes is proportional to the lenght of the original. The size of the copy is correct. Position and value of the different bytes vary between each copy.
View 1 Replies
View Related
Sep 26, 2006
has anybody seen this message before? I'm at a complete loss as to where to even start!
View 3 Replies
View Related
Mar 28, 2008
I noticed a strange file on my desktop today. It has no filetype, it just says 8Ia03412 and is 70.3 MB. Is there anything I can do to find out what this is? All the programs I've tried won't open it.
View 7 Replies
View Related
Apr 2, 2010
Every time i switch my system i get the following error "The exception unknown software exception (0xc0000024) occurred in the application at location 0x7c964ed1.Click on OK to terminate the program" and the title bar shows "setup.exe -Application Error"
View 2 Replies
View Related
Feb 26, 2008
Every time I try to update a programme I get this message, I notice it says IE5, I'm using IE6 if that makes any difference to the error report.
View 14 Replies
View Related
Jan 28, 2007
Hello all, I remember reading in a computer magazine about some website that is able to determine an unknown file by entering the name of that file into its text box. I think it is able to determine what kind of file it is.The problem is I cannot remember what the website is called.
View 1 Replies
View Related
Oct 15, 2005
if the file named C:RECYCLERS-1-5-~1:14CAB 746.UFEGBZHP5PMFYS7YUNOR is something I should remove and if so how does one go about doing this ?
View 8 Replies
View Related
Jun 8, 2006
I have a symbol with 2 blue arrows on all my file icons and i have no idea what it is.
View 6 Replies
View Related
Jan 17, 2005
All of a sudden I cannot boot up my Toshiba laptop (2.3mhz pent4, 512 RAM, Windows XP Home with SP2). I get the error message "Windows XP could not start because the following file is missing or corrupt:C:windowssystem32configsystem".By hitting the F8 key when starting I can get the start menu and I've tried booting into safe mode and I've tried "boot using last known good configuration" - but still get the same error message.
View 8 Replies
View Related
Aug 7, 2005
I have downloaded an application from the internet and tried to run the setup however the program keeps giving me tis message: "Not a valid Win32 application". What is the matter? I have removed it and downloaded it again and it still doesn't help. How can i overcome this problem to install it?
View 3 Replies
View Related
Jun 12, 2008
I just cleared off several spywares from my laptop (used SuperAntiSpyware and Smitfraudfix). Both worked without a hitch, but now I found 2 programs running in the background that are eating up my cpu speed. The first was utorrent which I uninstalled thru Add Remove Prog. The other is in the startup folder and will not let me turn it off or uninstal(documents&settings/user/applicationdata/microsoft/dtsc/22751). After reading several other posts on things to do before posting, I cleared the temp folders and ran hijackthis. The log is attached. What is this file and should I remove it, and if so how?
View 3 Replies
View Related
May 6, 2009
i am a beginner and have tried to sort this out by searching the net for a cure - but every 'solution' seems to be a ropy sales gambit!When I try to download, instead of a dialog box choosing between 'Run' and 'Save', it's one offering me only 'Find' and 'Save'.Clicking 'Find' brings up the Windows File Association page stating:-"MIME Type: application/x-msdownload Description: UnKnownWindows does not recognize this MIME type." What do I need to do to get XP to recognise the file?
View 7 Replies
View Related
Apr 11, 2006
Trying to open a file in windows media player and a message comes up that says The application or DLL C:WINDOWSSystem32AVIFIL32.dll is not a valid Windows image. Please check this against your installation diskette.
View 12 Replies
View Related
