Bootup Error Message - Application Falied Wnaspi32.dll
Mar 30, 2007
when booting up my computer and after logging on I receive the following error messages before the windows screen comes up:
1) regedit.exe - The procedure entry point PrintDlgexw could not be located in the dynamic link library comdlg32.dll.
2) hpppt.exe - This application has falied to start because WNASPi32.dll was not found. re-install application may fix problem and last but not least
3) The procedure entry point PrintDlgexw could not be located in the dynamic link library comdlg32.dll
I do not know why these error started all of a sudden and do not know how to fix them. By clicking on OK for each error message I eventually get to my windows screen and can do everything, print. open documents, check outlook and go to the internet. I have an operating system Windows XP on a DELL optiplex gx280 system.
View 2 Replies
ADVERTISEMENT
Oct 17, 2005
As my XP computer boots up an error message flashes by and then disappears and the computer continues to boot. All seems well. Im fairly sure its from a prior program, Acronis something or other that I deleted. It was a program similar to Norton Ghost for backing up and rebooting in case of emergency that gave you the option to press F11 during boot up if you wanted to it use it in an emegenecy. Anyway, how do I edit it out of there? It drives me nuts. I also think both my boot time and shutdown/restart times are slower than what they were or should be.
View 10 Replies
View Related
Aug 21, 2006
the error that pops up after loading is related to svchost.exe - Application Error ( The instruction at 0x500bcb9a referenced memory at 0x00000000 the memory cannot be "read") I'm pretty sure it's not a virus. I did a full system scan with Kaspersky 6.0, Ad-aware pro and spybot.
View 7 Replies
View Related
May 3, 2005
I have three (3) questions:1. When I'm closing down Windows XP (Home Edition), I continually receive an error showing "XtkU.exe" cannot. I have checked everywhere and cannot find out what this file is associated with. In addition I have gone through my system and purged all files associated with this executable from the registry. They pop right back in there with a system restart. I'm lost and confused now because I don't know what application uses this file.2. When closing down I receive the same Norton error message another user gets."ccaps.exe" at signoff. I will try and remove Norton to see if that works. 3. The user "quick switch" does not work any longer. I am not sure what is causing that either. Do you think it may be associated with the WtkU file?
View 2 Replies
View Related
Apr 4, 2005
Try to install new software Turbo Tax and the software for my new Epson Scanner. I get this application error message: This application cannot run. That is all it says. I've had this computer for three years and have installed software many times with no problems. There is plenty of room on the hard drive. I have tried installing in safe mode. I have tried to restore back. I have done a defrag.
View 8 Replies
View Related
Jan 2, 2007
I uninstalled Windows Defender ages ago as soon as I realized that it had just been hogging the CPU. For some reason, an error message pops up on startup: "The application failed to initialize: 0x800106ba. The problem caused the Windows Defender service to stop. For information on how to manually start a service, see the Help and Support center."
View 6 Replies
View Related
Dec 12, 2006
my mate is getting the following message onscreen on boot up:-
rundll32.exeC:WINDOWSsystem32advpack.dll,DelNodeRunDLL32"C:DOCUME~1Ala nsLOCALS~1 emp1xPOOO.TMP"
View 11 Replies
View Related
Feb 26, 2008
Every time I try to update a programme I get this message, I notice it says IE5, I'm using IE6 if that makes any difference to the error report.
View 14 Replies
View Related
Aug 11, 2006
Instead of getting the graphical splash screen with the blue dots moving from left to right across the screen before the user login screen presents, I am able to select Linux and boot up properly there. Each OS is on its own hard disk. I had earlier saved off each MBR in case I ever had a problem with it. I have checked the MBR for the WinXP disk (i.e. the 0th (1st) sector) on the disk consisting of 512 bytes. It checked out OK with no binary differences, so I am confident that there is no problem with the WinXP MBR or the partitions in it. Obviously there is a problem after control is transferred from the WinXP MBR to bootup WinXP.My strategy now is going to be to run the bootcfg /rebuild command from the Recovery Console after checking out the boot list from the bootcfg command - if I can get that far with the Recovery Console.I do not seem to be able to get into Safe Mode or the Advanced Options screen selection by pressing on the F8 key. My boot.ini file was edited OK and had an extra line to boot into Safe Mode, but that does not work now.
So, my theory is that if all was working as before OK, I should be getting the selection to boot into Safe Mode vs normal bootup with the changes I made to the boot.ini file. Since I am not getting that and experiencing the problem as described above, I am assuming that something is out-of-kilter with the boot.ini file.Also, my last shutdown in the morning yesterday went Ok. What I was doing before I shutdown for lunch was shredding files - everything went OK with no apparent problems, but I wonder whether something went adrift without being noticed and corrupted some files on my system - notably, the boot.ini file - at least this is what I suspect.Anyone see a problem with what I have in mind to do or have a better idea how to fix this problem?
View 2 Replies
View Related
Aug 9, 2010
I am running windows xp home, sp3 on a Geteway desktop with a pentium 4. A while ago, after doing and un-doing a system restore, I am now getting and error message everytime I boot up. In front of a larget DOS window there is a smaller gray error window that is tiiled '16 bit MS-DOS subsystem'.
View 1 Replies
View Related
Aug 7, 2005
I have downloaded an application from the internet and tried to run the setup however the program keeps giving me tis message: "Not a valid Win32 application". What is the matter? I have removed it and downloaded it again and it still doesn't help. How can i overcome this problem to install it?
View 3 Replies
View Related
Oct 18, 2006
I have done a couple of searches and cant seem to find anything, this may be due to my search criteria not being good enough, but hopefully not and im not double posting.I constantly get the following error in event log on bootup and cant seem track down whats causing it.The COM+ Event System detected a bad return code during its internal processing. Please contact Microsoft Product Support Services to report this error.There is nothing in the knowledge base at microsoft for this. If anyone can give me some pointers or a possible direction to go in I would appreciate it.
View 2 Replies
View Related
Jun 18, 2005
An odd thing has started to happen recently with my PC.On booting up, just before Windows (XP Pro) starts to load up, I get theerror message:
"KEYBOARD IS LOCKED OUT - UNLOCK THE KEY"
The compter then waits for me to press the F1 key to continue loading
Windows, and once Windows is loaded everything is fine. I know the keyboard
itself isn't faulty as I have tried two other keyboards and the same error
appears. I have tried switching from USB to PS2 and again the same error
appears.I have tried updating the BIOS on my motherboard (ASUS P4S533 Bios Ver 1011)
and that has not fixed the problem.
View 8 Replies
View Related
Apr 11, 2006
Trying to open a file in windows media player and a message comes up that says The application or DLL C:WINDOWSSystem32AVIFIL32.dll is not a valid Windows image. Please check this against your installation diskette.
View 12 Replies
View Related
Jan 18, 2005
I have a Canon Scanner. When I want scan something and I click on print then after the document is finished printing and if I want to click print again to print another document then I get an error saying: " The parallel port may be used by another application. Error Code: 0x00060800 " How do I fix this Problem? The Scaner Program is called: CanoCraft CS-P 3.7.
View 14 Replies
View Related
Apr 18, 2008
Every time I boot up I get a blue screen that says I have a a disk error, but I can cancel the test. If I let this run and let it start testing, It responds with "unspecified error" after a second or two. I have manually run the disc checking on all HDs. No errors found. Is this some kind of a joke, a virus, or distraction so some malware can load?
View 5 Replies
View Related
Jan 3, 2005
issue with friend pc, when he boots up he gets the menu that says along the lines of 1. boot xp home from hard disk 2.setup xp from cd so he has to like press 1 every time he starts up his pc. if he leaves it it goes thru some bumf and gives an error n reboots its cos i tried to reinstall xp at one point for him (other problems which later dissapeared) and the system crashed out on me before i could do it..
View 1 Replies
View Related
Aug 12, 2008
I'm running Windows XP SP 2 and I get an error message whenever i connect my blackberry curve to the computer. if the usb device is stopped, it will go away, but other than that it won't disappear after clicking cancel. if it helps, I installed the roxio media manager only yesterday, when the error first came up. Its name is Exception Process Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6b
View 2 Replies
View Related
Apr 11, 2006
Every time I switch on my machine and try to connect to the internet, I get a dialogue box: Web page is unavailable while offline. To view this page, click connect. When I click connect, I can view the page and don't get the error message again until I switch off the machine. Why does this happen?
View 6 Replies
View Related
Dec 8, 2004
Im getting this message when trying to restart windows XP. i get it even when i try to enter into safe mode. If I click on either option it restarts the machine. I cant even get access to the safe mode of windows
"Application error: Winlogon.exe. Click ok to close or cancel to debug."
View 2 Replies
View Related
May 4, 2010
I get INST32.EXE Application Error Box with Message Application failed to intialize (0xc0000006) Click Ok to terminate . push OK twice to remove box. I am trying to load my Printmaster Platinum 7.0 or 8.0 and neighter will load. I have been trying to get this fixed for over 3 weeks. Nothing I have found will work.
View 15 Replies
View Related
Apr 25, 2007
tmproxy.exe- application error it says the memery can not be "read"
View 1 Replies
View Related
Feb 28, 2009
The Instruction at "0x75606eb5" referenced at "0x00000008". The memory could not be "read".Click OK to terminate the program.I keep getting these messages all the time but the numbers keep changing. it started when i my sister started typing something. the day before she had also spent all night typing. now i get that message for everything.Don't know what to do. I tryed disabling automatic updates and then updating it manually on website but when try i get redirected to Google.
View 53 Replies
View Related
Jun 19, 2005
After using Windows Explorer to view files and folders I get the following error message:Proxy Desktop - explorer.exe - Application error.The instruction 0x01f24213 referenced memory at 0x018dad58. The memory could not be "read". Click OK to terminate the program.I am using Win XP Home Ed with Service Pack 2 installed on a Dell Dimension 8200 with 512 MB memory. What is the simplest course for recovering from this problem.The program seems to work anyway.
View 6 Replies
View Related
Apr 25, 2006
Explorer doesn't load it just stops and when i close it i get this message.The instruction at "0x1001cd11" referenced memory at "0x1001cd11". The memory could not be "read".
View 7 Replies
View Related
Sep 21, 2007
I'm getting this error massage for a few days. It says:The instruction at "0x7c9111de" referenced memory at "0x00720065".The memory could not be "read".
View 9 Replies
View Related
Aug 22, 2007
Good morning, I have a couple of problems and I can't figure out how to get my computer back to where it used to be. I think it has something to do with updating windows. I get messages everytime I try to open a photo or a file. One message is Explorer EXE-Application Error, The instruction of ox600470a4 referenced memory at ox600470a4. The memory could not be written. Click on ok to terminate the program, click on cancel to debug the program. I clicked on debug and the program I got a message about Dr. Watson trying to communicate with ? and I clicked ok. Then the photo closed and all the icons disappeared and the reappeared. When I opened the same photo again, I got the following message. Data Execution Prevention-Microsoft Windows to help protect your computer, Windows has closed this program and also Windows Explorer has encountered a problem and needs to close, etc. Again the program shuts down. Basically, I can't open anything without the error messages. I can't copy cd's either as I have in the past with Nero. The program starts and then I get a read message or the cd just will not copy. Is there a way that I can do a restore and have my computer back to where it was 3 weeks ago? I could do that with my old computer Windows 98se. I have a HP Media M7060n now and I have XP home edition. Up to now I have had no problems. This computer is very different from my old one and I have no clue how I would do a restore. I just want a restore from 3 weeks ago, not a complete restore. I think the problem has to do with a windows update. I think I did one just before these problems occured. I lost my virus protection and had to reinstall it. I thought maybe that was the problem so I uninstalled it, but that wasn't it. So..here I am very frustrated. I know this post is long and I apologize. Thank you~Liz
View 6 Replies
View Related
Jan 8, 2008
Windows XP Media Center Edition Ver 2002 Acer Aspire e360
12/3/2007 10:26 AMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16544, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/28/2007 6:28 PMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16574, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/28/2007 7:32 PMApplication ErrorFaulting application avant.exe, version 11.5.0.0, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/30/2007 8:49 PMApplication ErrorFaulting application avant.exe, version 11.5.0.0, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/30/2007 8:55 PMApplication ErrorFaulting application firefox.exe, version 1.8.20061.20418, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/30/2007 8:56 PMApplication ErrorFaulting application avant.exe, version 11.5.0.0, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
1/1/2008 9:08 PMApplication ErrorFaulting application firefox.exe, version 1.8.20061.20418, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
1/3/2008 10:17 PMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16574, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
1/3/2008 4:46 PMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16574, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x0002ae22.
View 5 Replies
View Related
Sep 7, 2006
I get one option "OK" i click on that, and I automatically re-boot. I'm returning this error when I boot:
SAS window winlogon.exe application error
View 4 Replies
View Related
Feb 18, 2008
I get the following error evry time my Windows XP Media Center PC boots
winlogon.exe - Application Error
The instruction at "0x0101050c" referenced memory at "0x117e4000". The memory could not be "read". Click OK to terminate the program Click CANCEL to debug the program When I click either the system reboots and I'm stuck here. I cannot get it to boot in safe mode but I can boot to a DOS prompt in the Microsoft Windows Recovery console.
View 2 Replies
View Related
Aug 2, 2008
I just got hit by a virus, it's all gone now. But one thing, it still messed up rundll32.exe and userinit. I cannot log in without, having to press control+ alt+delete, file, newtask, explorer.exe
View 1 Replies
View Related
