Application Error Module Ntdll.dll
Jan 8, 2008
Windows XP Media Center Edition Ver 2002 Acer Aspire e360
12/3/2007 10:26 AMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16544, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/28/2007 6:28 PMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16574, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/28/2007 7:32 PMApplication ErrorFaulting application avant.exe, version 11.5.0.0, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/30/2007 8:49 PMApplication ErrorFaulting application avant.exe, version 11.5.0.0, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/30/2007 8:55 PMApplication ErrorFaulting application firefox.exe, version 1.8.20061.20418, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/30/2007 8:56 PMApplication ErrorFaulting application avant.exe, version 11.5.0.0, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
1/1/2008 9:08 PMApplication ErrorFaulting application firefox.exe, version 1.8.20061.20418, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
1/3/2008 10:17 PMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16574, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
1/3/2008 4:46 PMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16574, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x0002ae22.
View 5 Replies
ADVERTISEMENT
Sep 13, 2005
I am trying to load SalesLogix CRM software client on a Dell Inspiron 9200 laptop with Windows XP SP2. Everytime SalesLogix opens I get an error report saying SalesLogix.exe had to close and the faulting module was NTDLL.DLL.
I tried SalesLogix support but they were of no help. I tried copying in NTDLL.DLL from another computer that SalesLogix is working on but I could not get it to register. Something about DLLRegisterServer entry point not found.
View 1 Replies
View Related
Apr 13, 2007
When I run a game called GTR2, the game freezes when it tries to access a file that draws a race track. The error message "Windows has encountered an error..." shows that the error is caused by the ntdll.dll file. Is the file corrupt?
View 7 Replies
View Related
Dec 7, 2008
Mobo MSI K8T Neo
Graphics Saphire X1950 Pro
2 seagate baracuda RAID 0 array 120G each so 240 total, only 1 partition.
I have never formatted. It started showing problems when I tried to install drivers for the graphics card. I could never get the drivers to work properly, now my framerate drops every few seconds in every game. I decided it was time to format it after I left alone for a few months.
This is the process I followed:
1-) Enter Windows XP SP3 CD in drive.
2-) Boot from CD.
3-) Windows Set Up appears and loads it's files.
At this point, I get the message "Starting Windows" which usually comes right before the Set up screen where I could format but I get an error (blue screen) that says
unknown hard error, NTDLL.DLL
View 2 Replies
View Related
Jun 25, 2005
I am not sure I am in the correct forum, but I recently started having a problem with an application starting to load and then a message coming up stating that there was a problem with the "ntdll.dll" file.
I even located a copy to download, placed that in the WindowsSystem32 folder and each time I continue to attempt to launch this application, it partially starts up, then hangs and then gives me the error message.
Is there something I am not doing correctly? Any suggestions? It had been working just fine for the past year or so and about a month ago, BOOM, this error message came up.
View 5 Replies
View Related
Nov 6, 2008
I receive the following error on startup of my laptop (XP SP3 operating system) Error loading C:Windowswftadfi16_080707a.dll The specified module could not be found Is this a major problem? How can it be fixed?
View 1 Replies
View Related
Jul 4, 2009
how do I turn off the RUNDLL error module not found (C:WINDOWSSYSTEM32bmqjtwi.dll when I turn on my computer?
View 1 Replies
View Related
Apr 23, 2006
Dell desktop running Windows XP SP2 is reporting an application error on a regular basis. Especially when trying to install new programs. It seems event errors have the ntdll.dll in common.
Here's one event log entry:
Faulting application nswsetup.exe, version 2006.9.0.103, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00036bd1.
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 6e 73 77 ure nsw
0018: 73 65 74 75 70 2e 65 78 setup.ex
0020: 65 20 32 30 30 36 2e 39 e 2006.9
0028: 2e 30 2e 31 30 33 20 69 .0.103 i
0030: 6e 20 6e 74 64 6c 6c 2e n ntdll.
0038: 64 6c 6c 20 35 2e 31 2e dll 5.1.
0040: 32 36 30 30 2e 32 31 38 2600.218
0048: 30 20 61 74 20 6f 66 66 0 at off
0050: 73 65 74 20 30 30 30 33 set 0003
0058: 36 62 64 31 0d 0a 6bd1..
======
Here's another, more common error:
Faulting application msiexec.exe, version 3.1.4000.1823, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00036bd1.
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 6d 73 69 ure msi
0018: 65 78 65 63 2e 65 78 65 exec.exe
0020: 20 33 2e 31 2e 34 30 30 3.1.400
0028: 30 2e 31 38 32 33 20 69 0.1823 i
0030: 6e 20 6e 74 64 6c 6c 2e n ntdll.
0038: 64 6c 6c 20 35 2e 31 2e dll 5.1.
0040: 32 36 30 30 2e 32 31 38 2600.218
0048: 30 20 61 74 20 6f 66 66 0 at off
0050: 73 65 74 20 30 30 30 33 set 0003
0058: 36 62 64 31 6bd1
===========================
Here's the HJT log:
Logfile of HijackThis v1.99.1
Scan saved at 11:14:32 AM, on 4/23/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Running processes:
C:WINDOWSSystem32smss.exe
C:WINDOWSsystem32winlogon.exe
C:WINDOWSsystem32services.exe
C:WINDOWSsystem32lsass.exe
C:WINDOWSsystem32svchost.exe
C:Program FilesWindows DefenderMsMpEng.exe
C:WINDOWSSystem32svchost.exe
C:WINDOWSsystem32spoolsv.exe
C:WINDOWSExplorer.EXE
C:Program FilesCommon FilesDellEUSWSupport.exe
C:WINDOWSSystem32qttask.exe
C:WINDOWSSystem32DSentry.exe
C:Program FilesWindows DefenderMSASCui.exe
C:WINDOWSsystem32ctfmon.exe
C:Program FilesDellSupportAlertinNotifyAlert.exe
C:WINDOWSsystem32cisvc.exe
C:WINDOWSSystem32svchost.exe
C:WINDOWSSystem32MsPMSPSv.exe
C:WINDOWSsystem32wscntfy.exe
C:WINDOWSsystem32cidaemon.exe
C:Program FilesOpenOffice.org 2.0programsoffice.exe
C:Program FilesOpenOffice.org 2.0programsoffice.BIN
C:Program FilesMozilla Firefoxfirefox.exe
C:Documents and SettingsThom HochMy DocumentsSoftwareHijackThis.exe
R1 - HKCUSoftwareMicrosoftInternet ExplorerMain,Default_Page_URL = http://www.dellnet.com
R1 - HKCUSoftwareMicrosoftWindowsCurrentVersionInternet Settings,ProxyOverride = 127.0.0.1
O2 - BHO: Adobe PDF Reader Link Helper - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:Program FilesAdobeAcrobat 7.0ActiveXAcroIEHelper.dll
O2 - BHO: (no name) - {53707962-6F74-2D53-2644-206D7942484F} - C:PROGRA~1SPYBOT~1SDHelper.dll
O2 - BHO: (no name) - {FDD3B846-8D59-4ffb-8758-209B6AD74ACC} - C:Program FilesMicrosoft MoneySystemmnyviewer.dll
O4 - HKLM..Run: [DwlClient] C:Program FilesCommon FilesDellEUSWSupport.exe
O4 - HKLM..Run: [UpdReg] C:WINDOWSUpdReg.EXE
O4 - HKLM..Run: [QuickTime Task] C:WINDOWSSystem32qttask.exe
O4 - HKLM..Run: [NvCplDaemon] RUNDLL32.EXE C:WINDOWSSystem32NvCpl.dll,NvStartup
O4 - HKLM..Run: [DVDSentry] C:WINDOWSSystem32DSentry.exe
O4 - HKLM..Run: [Windows Defender] "C:Program FilesWindows DefenderMSASCui.exe" -hide
O4 - HKCU..Run: [ctfmon.exe] C:WINDOWSsystem32ctfmon.exe
O4 - HKCU..Run: [Microsoft Works Update Detection] C:Program FilesMicrosoft WorksWkDetect.exe
O6 - HKCUSoftwarePoliciesMicrosoftInternet ExplorerRestrictions present
O6 - HKCUSoftwarePoliciesMicrosoftInternet ExplorerControl Panel present
O8 - Extra context menu item: E&xport to Microsoft Excel - res://C:PROGRA~1MICROS~3Office10EXCEL.EXE/3000
O8 - Extra context menu item: Yahoo! Dictionary - file:///C:Program FilesYahoo!Common/ycdict.htm
O8 - Extra context menu item: Yahoo! Search - file:///C:Program FilesYahoo!Common/ycsrch.htm
O9 - Extra button: (no name) - {08B0E5C0-4FCB-11CF-AAA5-00401C608501} - C:WINDOWSSystem32msjava.dll
O9 - Extra 'Tools' menuitem: Sun Java Console - {08B0E5C0-4FCB-11CF-AAA5-00401C608501} - C:WINDOWSSystem32msjava.dll
O9 - Extra button: (no name) - {CD67F990-D8E9-11d2-98FE-00C0F0318AFE} - (no file)
O9 - Extra button: MoneySide - {E023F504-0C5A-4750-A1E7-A9046DEA8A21} - C:Program FilesMicrosoft MoneySystemmnyviewer.dll
O9 - Extra button: Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:Program FilesMessengermsmsgs.exe
O9 - Extra 'Tools' menuitem: Windows Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:Program FilesMessengermsmsgs.exe
O12 - Plugin for .spop: C:Program FilesInternet ExplorerPluginsNPDocBox.dll
O16 - DPF: {01010E00-5E80-11D8-9E86-0007E96C65AE} (SupportSoft SmartIssue) - https://www-secure.symantec.com/tech...rl/tgctlsi.cab
O16 - DPF: {01012101-5E80-11D8-9E86-0007E96C65AE} (SupportSoft Script Runner Class) - https://www-secure.symantec.com/tech...rl/tgctlsr.cab
O16 - DPF: {01A88BB1-1174-41EC-ACCB-963509EAE56B} (SysProWmi Class) - http://support.dell.com/us/en/systemprofiler/SysPro.CAB
O16 - DPF: {0E5F0222-96B9-11D3-8997-00104BD12D94} (PCPitstop Utility) - http://www.pcpitstop.com/pcpitstop/PCPitStop.CAB
O16 - DPF: {17492023-C23A-453E-A040-C7C580BBF700} (Windows Genuine Advantage Validation Tool) - http://go.microsoft.com/fwlink/?linkid=39204
O16 - DPF: {1F2F4C9E-6F09-47BC-970D-3C54734667FE} - http://www.symantec.com/techsupp/asa/LSSupCtl.cab
O16 - DPF: {2BC66F54-93A8-11D3-BEB6-00105AA9B6AE} (Symantec AntiVirus scanner) - http://security.symantec.com/sscv6/S...in/AvSniff.cab
O16 - DPF: {31B7EB4E-8B4B-11D1-A789-00A0CC6651A8} (Cult3D ActiveX Player) - http://i.a.cnn.net/cnn/resources/cult3d/cult.cab
O16 - DPF: {31E68DE2-5548-4B23-88F0-C51E6A0F695E} (Microsoft PID Sniffer) - https://support.microsoft.com/OAS/ActiveX/odc.cab
O16 - DPF: {644E432F-49D3-41A1-8DD5-E099162EEEC5} (Symantec RuFSI Utility Class) - http://security.symantec.com/sscv6/S.../bin/cabsa.cab
O16 - DPF: {6E32070A-766D-4EE6-879C-DC1FA91D2FC3} (MUWebControl Class) - http://update.microsoft.com/microsof...?1127047835125
O16 - DPF: {6F750200-1362-4815-A476-88533DE61D0C} (Ofoto Upload Manager Class) - http://www.kodakgallery.com/download...1/axofupld.cab
O16 - DPF: {8E28B3A9-FE83-45D1-B657-D5426B81A121} (CustomerCtrl Class) - http://cs5b.instantservice.com/jars/...rxsigned33.cab
O16 - DPF: {B020B534-4AA2-4B99-BD6D-5F6EE286DF5C} - http://a248.e.akamai.net/f/248/5462/...l/SymDlBrg.cab
O16 - DPF: {C2FCEF52-ACE9-11D3-BEBD-00105AA9B6AE} (Symantec RuFSI Registry Information Class) - http://security.symantec.com/sscv6/S.../bin/cabsa.cab
O16 - DPF: {CE28D5D2-60CF-4C7D-9FE8-0F47A3308078} (ActiveDataInfo Class) - http://www.symantec.com/techsupp/asa/SymAData.cab
O16 - DPF: {D18F962A-3722-4B59-B08D-28BB9EB2281E} - http://photos.yahoo.com/ocx/us/yexplorer1_9us.cab
O16 - DPF: {E7DBFB6C-113A-47CF-B278-F5C6AF4DE1BD} - http://download.abacast.com/download...basetup141.cab
===================
Info on this machine:
OS NameMicrosoft Windows XP Home Edition
Version5.1.2600 Service Pack 2 Build 2600
OS ManufacturerMicrosoft Corporation
System ManufacturerDell Computer Corporation
System ModelDimension 4550
System TypeX86-based PC
Processorx86 Family 15 Model 2 Stepping 7 GenuineIntel ~1993 Mhz
BIOS Version/DateDell Computer Corporation A03, 11/12/2002
SMBIOS Version2.3
Windows DirectoryC:WINDOWS
System DirectoryC:WINDOWSsystem32
Boot DeviceDeviceHarddiskVolume2
LocaleUnited States
Hardware Abstraction LayerVersion = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
Time ZoneCentral Daylight Time
Total Physical Memory512.00 MB
Available Physical Memory215.89 MB
Total Virtual Memory2.00 GB
Available Virtual Memory1.96 GB
Page File Space1.22 GB
Page FileC:pagefile.sys
View 1 Replies
View Related
Sep 23, 2006
Getting a strange error in Dell Inspiron 9300, running some version of XP, and that's all that I know.
When you turn on his computer, you see the Dell startup-screen for a second, and then it automatically brings you to the prompt that says "We apologize for the inconvenience, but Windows did not start successfully." window. There are obviously 5 options: Safe Mode, SM with Networking, SM with Command Prompt, Last Known Good Configuration, and Start Windows Normally. Each one of those brings me to the blue screen that says:
STOP: c000021 Unknown Hard Error
SystemRootSystem32
tdll.dll
I searched on other forums, and it seems that this is what people have done to fix this: either try to Repair Windows, reinstall Windows, manually replace ntdll.dll (if they can actually get into Windows, which I can't), or do something with their memory cards, I'm not sure what.
Are those approaches I listed correct? And 2nd, I don't want to have to mess with my friend's memory if I don't have to.I'm not too much of a tech person. I do, however, have my family's Windows XP Home Edition install CD with me.if I put that into his computer, and try to repair Windows, would that work?
View 5 Replies
View Related
Dec 29, 2007
Error loading C:Windowssystem. gvnficb.dll the specified module could not be found
View 1 Replies
View Related
Mar 8, 2005
Running windows XP operating system.I am getting a message which states Error loading CMICNFG3.CPL RUNDLL This specific module could not be found.
View 5 Replies
View Related
Jun 19, 2005
Everytime I turn on my computer and windows starts up. It tells me it cannot find cfgmgr52.dll module. error loading it states. Our daughter opened a link
and just loaded it up with so many stubborn adware. That with norton I was finally able to get rid of them.
View 1 Replies
View Related
Jul 14, 2009
Every time I exit Overlord I get Send/Don't Send error with modname "ntdll.dll". A mate of mine has the same error.
ps: is is normal that Windows XP has so many errors?
View 1 Replies
View Related
Dec 8, 2004
Im getting this message when trying to restart windows XP. i get it even when i try to enter into safe mode. If I click on either option it restarts the machine. I cant even get access to the safe mode of windows
"Application error: Winlogon.exe. Click ok to close or cancel to debug."
View 2 Replies
View Related
May 4, 2010
I get INST32.EXE Application Error Box with Message Application failed to intialize (0xc0000006) Click Ok to terminate . push OK twice to remove box. I am trying to load my Printmaster Platinum 7.0 or 8.0 and neighter will load. I have been trying to get this fixed for over 3 weeks. Nothing I have found will work.
View 15 Replies
View Related
Apr 25, 2007
tmproxy.exe- application error it says the memery can not be "read"
View 1 Replies
View Related
Feb 28, 2009
The Instruction at "0x75606eb5" referenced at "0x00000008". The memory could not be "read".Click OK to terminate the program.I keep getting these messages all the time but the numbers keep changing. it started when i my sister started typing something. the day before she had also spent all night typing. now i get that message for everything.Don't know what to do. I tryed disabling automatic updates and then updating it manually on website but when try i get redirected to Google.
View 53 Replies
View Related
Jun 19, 2005
After using Windows Explorer to view files and folders I get the following error message:Proxy Desktop - explorer.exe - Application error.The instruction 0x01f24213 referenced memory at 0x018dad58. The memory could not be "read". Click OK to terminate the program.I am using Win XP Home Ed with Service Pack 2 installed on a Dell Dimension 8200 with 512 MB memory. What is the simplest course for recovering from this problem.The program seems to work anyway.
View 6 Replies
View Related
Apr 25, 2006
Explorer doesn't load it just stops and when i close it i get this message.The instruction at "0x1001cd11" referenced memory at "0x1001cd11". The memory could not be "read".
View 7 Replies
View Related
Sep 21, 2007
I'm getting this error massage for a few days. It says:The instruction at "0x7c9111de" referenced memory at "0x00720065".The memory could not be "read".
View 9 Replies
View Related
Aug 22, 2007
Good morning, I have a couple of problems and I can't figure out how to get my computer back to where it used to be. I think it has something to do with updating windows. I get messages everytime I try to open a photo or a file. One message is Explorer EXE-Application Error, The instruction of ox600470a4 referenced memory at ox600470a4. The memory could not be written. Click on ok to terminate the program, click on cancel to debug the program. I clicked on debug and the program I got a message about Dr. Watson trying to communicate with ? and I clicked ok. Then the photo closed and all the icons disappeared and the reappeared. When I opened the same photo again, I got the following message. Data Execution Prevention-Microsoft Windows to help protect your computer, Windows has closed this program and also Windows Explorer has encountered a problem and needs to close, etc. Again the program shuts down. Basically, I can't open anything without the error messages. I can't copy cd's either as I have in the past with Nero. The program starts and then I get a read message or the cd just will not copy. Is there a way that I can do a restore and have my computer back to where it was 3 weeks ago? I could do that with my old computer Windows 98se. I have a HP Media M7060n now and I have XP home edition. Up to now I have had no problems. This computer is very different from my old one and I have no clue how I would do a restore. I just want a restore from 3 weeks ago, not a complete restore. I think the problem has to do with a windows update. I think I did one just before these problems occured. I lost my virus protection and had to reinstall it. I thought maybe that was the problem so I uninstalled it, but that wasn't it. So..here I am very frustrated. I know this post is long and I apologize. Thank you~Liz
View 6 Replies
View Related
Sep 7, 2006
I get one option "OK" i click on that, and I automatically re-boot. I'm returning this error when I boot:
SAS window winlogon.exe application error
View 4 Replies
View Related
Feb 18, 2008
I get the following error evry time my Windows XP Media Center PC boots
winlogon.exe - Application Error
The instruction at "0x0101050c" referenced memory at "0x117e4000". The memory could not be "read". Click OK to terminate the program Click CANCEL to debug the program When I click either the system reboots and I'm stuck here. I cannot get it to boot in safe mode but I can boot to a DOS prompt in the Microsoft Windows Recovery console.
View 2 Replies
View Related
Aug 2, 2008
I just got hit by a virus, it's all gone now. But one thing, it still messed up rundll32.exe and userinit. I cannot log in without, having to press control+ alt+delete, file, newtask, explorer.exe
View 1 Replies
View Related
May 17, 2008
After having the comp for a week or so (got it from a friend for cheap, in perfect condition) any time i try opening a program such as Word, the Open With screens pops up, and i have to find the program manually and open it. when try to open anything in the control panal, such as add/remove programs, an error pops up that reads:
C:WINDOWSsystem32
undll32.exe
Application not found
View 10 Replies
View Related
Sep 23, 2004
I just bought a HP Laptop Computer and it has installed in it, Works for Windows. When I try to run the word processor part it come up with this message:
"The Application Failed to start because LTKRN13N.dll was not found. Re-installing the application may fix the problem."I click [ok] and the window closes. Then another windows opens and says this: Windows cannot access one or more required files. The files may have been renamed, deleated or moved. Try re-installing Works and then starting the program again.
View 1 Replies
View Related
Dec 7, 2006
Error from any application that tries to access the Internet. This includes IE, the Live Messenger, Yahoo Messenger, Limeware, uTorrent, any application, the moment I try to access the Interent with it. For example, I'll get the error the moment I try to log on with MSN, but not when I initially launch the messenger. However, if I don't actually click the Don't Send button, the applications work just fine...The problem has started when I accidently turned off the PC without a proper shut down.I don't actually get the errors in Safe Mode, but then again, I have no internet connection there.
View 2 Replies
View Related
Aug 4, 2008
This is a past post that someone else posted but I'm having the same problem and I did not understand the solution. Here is what he put:"Windows won't start up on my badly-infected WinXP PIV. It gets past the logging on to windows prompt and then this error message comes up userinit.exe application error (0xc0000005) and Windows then fails to load completely. This also occurs in safe mode and I haven't been able to bypass Windows and boot directly to DOS by using the F8 key on startup."
This is exactl my issue except I haven't tried to go to Dos mode b/c I didn't know how.This was his reply..."See if this helps:Restore WinlogonUserinit
Line #263 right side http://www.kellys-korner-xp.com/xp_tweaks.htm
View 4 Replies
View Related
Feb 17, 2005
I have an accounting program in which I have data files for each year of my business. These have been successfully backed up for years on CD and now JumpDrive, and stored on the desktop with a shortcut for easy access. I downloaded and installed SP2. Now when trying to open a file, I get the message C:XXXXXXXXX is not a valid Win32 application. It always was before so what changed?I cannot back up my current files because that is the name I've always used. The computer doesn't recognize the name as valid so I have no security.
View 1 Replies
View Related
Sep 8, 2009
This came out after i open my windows and logged in. I tried opening my task manager and it won't come out, i waited like 1 hr juts to see how will this help but it did not help anything, it's just this two problems that shows up everytime even if i press "okay" button it will still shows up. all of that i tried but the same problem shows up, " drwtsn32. exe - application error" and "dwwin.exe - application error ". i can't access anything in my programs coz even the "start" button is not shown. i tried using another account but the same problem shows up.
View 14 Replies
View Related
Oct 17, 2007
I tried to dowload some codecs to watch a movie (without success), my computer is running very badly.It always freezes and I have to reboot or it responds very very slowly. The only hint I have is a Windows type error message which pops-up at almost each boot kdyow.exe - Application Error exception Breakpoint A breakpoint has been reached.(0x80000003) occured in the application at location 0x00411ccc.Whether I choose either one of the option, it always come back and my computer is having a very hard time running. Did I catch a virus of some sort ? I searched the Internet and the breakpoint thing seems to be frequent, as well as the 0x80000003 but nothing about the 0x00411ccc?
View 13 Replies
View Related
