I'm running Windows XP Home Edition and right out of the blue my USB ports [all 4 of them] on my 'puter are not working. I first noticed it when I was trying to get info off one of my thumb drives. I inserted it and the thumb drives light comes on for about 2 or 3 seconds and then goes out and now when I try to print something, I get the USB error on my screen.
View 4 RepliesMy P.C. worked fine for months and then suddenly wouldnt recognise my memory sticks. It won't print via the USB ports either. Power is getting through because i can charge my mp3 player and the P.C. speakers are powered vias USB. Device manager tells me the USB ports are working correctly. I've tried loads of stuff off the web but I just can't get them to work again. I even reformatted the drive and reinstalled everything, no good.
View 6 Replies View RelatedLast week I was hit with a multitude of viruses. Since then I've followed
the KRC Anti-Spyware tutorial, I have ewido, spybot (tea timer running), Ad-Aware, etc. and cleaned everythign up, and my system is finally stable again. I even got Norton System works and that helped a lot too. I've been to Windows update and am completely up to date with installs.2 problems still: I still have no audio, and 5 of my USB ports are not working
Have HP Deskjet 6540 connected to Win98 SE Computer through a USB 2.0 card. Will not print. Talked to HP Tech Support. They said I need USB port on mother board instead of card to have enough power. Correct nor not?
View 2 Replies View Relatedi have four usb ports all of them are not working
View 1 Replies View RelatedI have a machine which has suddenly stopped responding to any mouse connected to the usb port. The ports appear to still be working as i can access a usb key etc from them. As soon as i plug a mouse in i get an error saying the device may not be installed properly. When checking in the control pannel all devices appear to be fine but the port the mouse is in shows as 'unknown device' it seems to have suddenly lost the ability to recognise when something is a mouse
View 12 Replies View Relatedi just reinstalled xp on my laptop and now it wont show up anything when i insert something intothe usb port. the light comes on on my usb stick. but thats all. i checked the usb controllers and the hubs and it says the device is working properally.
View 1 Replies View RelatedI have lost access to all the USB ports on a PC. There was no apparent crash but I realised there was a problem when the USB Mouse stopped working. Everything else is working OK. I get an Error 39 (drivers corrupted or missing) and the 2 entries in Device Manager both have yellow marks against them. I only have "Standard Enhanced PCI to USB Host Controller" and "Standard OpenHCD USB Host Controller" entries below the entry for Universal Serial Bus Controllers - no Root Hubs are there and there are no Unknown Devices anywhere else.I was running XP Pro SP2 when the ports went, but have installed SP3 and Updated to see if that did anything - it didn't. I have tried the troubleshooting suggestions on Microsoft such as deinstalling and rebooting, updating, system restore and have done a repair installation using my original XP SP2 disc all with no result.
View 9 Replies View RelatedMy system crashed and i had to reinstall windows xp, now i have no audio devices and my USB ports are not working. How can i mix it?
View 2 Replies View RelatedMy CPU has been 100% for over a month. I first thought it was a virus so a scanned w/ every program out there and nothing would detect anything, HJT log was reviewed and nothing found so I went down the Registry Path and tried to repair with Registry Repair Tools to no avail. So I backed up all my files and did a complete OS re-install in CPU is still at 100%. And when this problem first started by USB ports stopped working.
View 6 Replies View RelatedI have 4 usb ports, computer not communicating anything plugged into them
BUT the green light on my memory card reader is on. It was all working before
a recent thunder and lightning storm. How can I reset them to communicate
again? XP pro service pack 2
Working on a Windows XP Home Edition Dell mini ATX with no serial mouse/keyboard - just USB. I ran Malware AntiMalwarebytes at owners home - no issues (apart from adware!) Keyboard/mouse work fine in set up - so have checked BIOS etc. Soon as load Windows - no response - hence Software issue rather than Hardware. Safe mode no use as mouse and keyboard don't work once windows loaded. Any gurus sorted this before? Have run a diagnostics through utility partition and Everything working okay - especially all USB elements.
View 1 Replies View RelatedI recently purchased a USB DVD burner. All of a sudden, my USB ports are not
functioning properly. I have 3 ports on my laptop, and have tried all of them. Also, my mouse works, but only if it is plugged in when I start my computer. If it is unplugged, and then plugged back in, the computer can't find it. I have very little computer knowledge, so need step by step walkthroughs. I have tried the troubleshooter, and followed all the steps, and nothing has worked.
the front two USB ports on my desktop are not working right. When I plug something into them, the system freezes and I have to turn the power off. This not happen to the two USB ports on the rear of the desktop.
View 2 Replies View RelatedI am using windows xp sp2 professional.few days back my usb ports stopped working suddenly.They don't recognize any usb devices.Also there is nothing like usb controller or usb ehci in the device manager.I don't have anyway to know what has happened.The motherboard is intel 845 gvsr.If you have any links for updating the usb driver or the bios or any solution to this
View 2 Replies View RelatedI've got a bit of a problem with my computer and was hoping some advice. Basically all the USB 2.0 ports on my computer have recently stopped working - I can still use them to charge my iPod, but not to communicate with it (I no longer get the little icon in the bottom right hand side of the screen when it's connected), and I can't use my printer because the computer insists it's off-line (I've tried two different cables so it can't be a problem with that).I've got two USB 2.0 ports on the back of my computer (built into my motherboard - can't remember the exact model offhand but the processor is one of those 2800+ Athlon 64bit ones, if that?s relevant) and I've also recently upgraded my monitor to a dell FPW2005, so I've now got another couple (not working) on the side of that too. I even tried taking the USB 2.0 card from my old computer (that has 4 USB 2.0 sockets in it and plugs directly into the motherboard) - but this didn't work either
View 3 Replies View RelatedI am working on a friends laptop, a Dell Inspiron 9200 running Windows XP Pro with SP3. I have it working well now except the USB ports do not work.The laptop was in pretty bad shape when I started. I remove Norton Antivirus (subscription expired 3 years ago), removed a few trojans and viruses using Malwarebytes and Combofix, and installed AVG Free. I also cleaned up the temp files, compacted the registry using NTRegOpt, and defragmented the drive.I have tried uninstalling the USB controllers and let Windows reinstall them, verified working status in Device manager, and disabled USB device power management. I also plugged in a USB mouse and verified the ports are supplying power.
View 5 Replies View RelatedNone of my USB ports are working. I believe that it was the cause of a thunderstorm. I already uninstalled all drivers and ports in the device manager and let windows reinstall them, and still none of my hardware is recognized, not even my mouse. All drivers seem to be installed correctly. Can my usb ports be fried? I dunno.
View 2 Replies View RelatedI have a Dell 4600 running XP Home and all my USB ports have suddenly stopped working. When I go to the device manager and expand the Universal Serial Bus Controllers, each of the Intel(R) 8280 1EB VBB Universal Host Controller has a yellow exclamation mark beside them. When I check their status this is the message: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19). I was not in the registry prior to this, so I don't know how it got damaged
I tried this: Click Uninstall, and then click Scan for hardware changes to load a usable driver ? no effect.
I tried this: Restart the computer in Safe Mode, and then select Last Known Good Configuration,which rolls back to the most recent successful registry configuration ? didn't fix the problem. Microsoft says that as a last resort, you can edit the registry directly ? but I not sure where and what to edit in the registry. If anyone can tell me what keys to edit in the registry I would very appreciative. I will do anything to avoid reinstall windows from scratch. I unfortuately didn't have system restore going so I cannot use that.
I have a Sony VGN-T1XP Vaio laptop with an Intel Pentium M Processor running XP Pro SP2. For some reason the two USB ports have stopped working and no USB devices are recognised. I have looked at the device manager under USB controllers and there are four USB controllers listed which are as follows: Intel 82801DB/DBM USB 2.0 enhanced host controller 24CDIntel 82801DB/DBM USB universal host controller 24C2Intel 82801DB/DBM USB universal host controller 24C4Intel 82801DB/DBM USB universal host controller 24C7 Underneath those are four USB root hubs.
I have previously used a USB card reader and external hard drive on both ports without any problems but now when I connect any device nothing at all happens.
I have a Gateway PC. I have a Lexmark 7170 printer. When I try to add a printer, I get a message that says the printer spooler service is not running. I tried run->services.msc, selecting printer spooler, and setting startup type to automatic. I then selected dependencies, and got a message that says this service depends on the following: LexBce Server, Remote Procedure Call. What else can I try? I should say that I just had work done on my PC and the Computer Repair Place left it like this.
View 8 Replies View RelatedI am using WinXP and my PRNT SCRN key fails to capture the screen image, I know it should but it doesn't. Therefore when I try to paste into PAINT, WORDPAD or MS WORD with the PASTE command or with CTRL+V nothing happens. I have checked this theory by tapping PRNT SCRN or ALT+PRNT SCRN or SHIFT+PRNT SCRN and then gone to CLIPBRD EXE. to view the captured screen, but nothing is on the clipboard. I can copy and paste in other programs but cannot copy the desktop screen using the PRNT SCRN key. Any suggestions on how to turn on this feature?
View 14 Replies View RelatedIm running XP Professional, SP 2, on an Intel P3 1Ghz, 512 MB of RAM.I deleted my old Lexmark printer after I installed a new HP. Now my printer wont work. I tried restarting the print spooler and nothing. I checked the dependencies and both boxes are 'GREY' (closed) and show no dependencies listed.Im thinking I deleted some files or file required to operate the spooler/printer? Or is it possobly spyware or something causing this problem? I did perform a registry cleanup after the installation of the new HP printer.
View 5 Replies View RelatedIm running Windows XP and my HP printer has stopped working. I get an error message regarding the print spooler not working. I go to the 'PRINTERS" folder and it shows that the re is no printer installed. Im wondering if I did something to cause this. I use the free version of Abexo Registry Cleaner as well as Zoftspy SE (purchased version) which I use daily. I have used Ad aware but I've deleted it. A short time ago I did have a Trojan (ad installer?) but my NAV deleted it. I still get messages from NAV that attempts to hijack were blocked by the NAV firewall. Also, the System restore wont work, whether I turn it off and restart it not at all.
View 8 Replies View RelatedI write a file in Word and then save it.Before I print it I usually go into Print Preview just to check things out.This time however it just showed me a blank box and the printer would not print.Everything was OK for a complete day and then the problem happened again - blank preview and no printing. This time switching off for 10 minutes and then back on had no effect.I have been trying most of today to correct things without success. I then copied it onto a floppy, put the floppy in my friends PC - same result as before
View 4 Replies View RelatedI previously owned a Lexmark Z25 printer and up to a certain point, it was printing ok. Then it abruptly stopped printing any pages. It sounded as if it was getting the signal from the computer, but nothing would print. Rather than buy new cartridges, which would have cost more than a new printer, I bought a Dell 720. Now, the color prints fine, but I cannot get the black to print. The cartridges are just about full with only a small amount out of the black cartridge.
View 7 Replies View RelatedWalk me through printing an envelope on my Lexmark X125. I have clicked on envelopes, then options for the envelope size, then print. The envelope comes out blank.
View 3 Replies View RelatedAll worked as normal Printer icon would print automatically with default print settings; File -Print would bring up print properties dialogue box to select options.Unhooked printer from laptop. Since reconnecting printer, the print icon button reverts to bringing up the print properties box as happens with going File - print. There is only one printer attached - it is shown in "Printers and Faxes" with a tick. There is nowhere to check it as the default printer as it is the only printer.How can I make the print icon button just do straight default prints again?
View 3 Replies View RelatedI have an old Sony VAIO (running Win Xp) that I am using a print server. The VAIO is connected to a HP PSC. The VAIO is on a wireless network along with two other laptops. One laptop is running Win Xp and the other is running Vista. Everything was working fine as far as printing went until I reinstalled the OS on the Win Xp machine (same OS). Previously the VAIO would go offline due to hibernation and so if I tried to print something from the Xp machine, it would get in the queue and get printed when I turned the VAIO on. Now the print jobs are not getting in a queue when the VAIO is offline.I don't know what I did right before and so I don't know how to remedy the problem.
View 10 Replies View RelatedI installed a new modem the other day cause the old one got fried. Now I am trying to print and the printer keeps giving me an error message, "this document fail to print." I tried all possible troubleshooting techniques but nothing help. I don't know what to do.
View 1 Replies View RelatedPrinter wont print THE printer normally prints fine but now it wont print atall the usb cable is in and the printer wont take the paper it just sits there
CONTROL PANEL> PRINTERS> OPEN and it says its printing just fine but it isnt Its in the front usb hub and tried the rear it dont make any differnence. The printer is on and its got paper etc etc.