My P.C. worked fine for months and then suddenly wouldnt recognise my memory sticks. It won't print via the USB ports either. Power is getting through because i can charge my mp3 player and the P.C. speakers are powered vias USB. Device manager tells me the USB ports are working correctly. I've tried loads of stuff off the web but I just can't get them to work again. I even reformatted the drive and reinstalled everything, no good.
View 6 RepliesI'm running Windows XP Home Edition and right out of the blue my USB ports [all 4 of them] on my 'puter are not working. I first noticed it when I was trying to get info off one of my thumb drives. I inserted it and the thumb drives light comes on for about 2 or 3 seconds and then goes out and now when I try to print something, I get the USB error on my screen.
View 4 Replies View RelatedHave HP Deskjet 6540 connected to Win98 SE Computer through a USB 2.0 card. Will not print. Talked to HP Tech Support. They said I need USB port on mother board instead of card to have enough power. Correct nor not?
View 2 Replies View RelatedLast week I was hit with a multitude of viruses. Since then I've followed
the KRC Anti-Spyware tutorial, I have ewido, spybot (tea timer running), Ad-Aware, etc. and cleaned everythign up, and my system is finally stable again. I even got Norton System works and that helped a lot too. I've been to Windows update and am completely up to date with installs.2 problems still: I still have no audio, and 5 of my USB ports are not working
I write a file in Word and then save it.Before I print it I usually go into Print Preview just to check things out.This time however it just showed me a blank box and the printer would not print.Everything was OK for a complete day and then the problem happened again - blank preview and no printing. This time switching off for 10 minutes and then back on had no effect.I have been trying most of today to correct things without success. I then copied it onto a floppy, put the floppy in my friends PC - same result as before
View 4 Replies View RelatedI previously owned a Lexmark Z25 printer and up to a certain point, it was printing ok. Then it abruptly stopped printing any pages. It sounded as if it was getting the signal from the computer, but nothing would print. Rather than buy new cartridges, which would have cost more than a new printer, I bought a Dell 720. Now, the color prints fine, but I cannot get the black to print. The cartridges are just about full with only a small amount out of the black cartridge.
View 7 Replies View RelatedWalk me through printing an envelope on my Lexmark X125. I have clicked on envelopes, then options for the envelope size, then print. The envelope comes out blank.
View 3 Replies View RelatedAll worked as normal Printer icon would print automatically with default print settings; File -Print would bring up print properties dialogue box to select options.Unhooked printer from laptop. Since reconnecting printer, the print icon button reverts to bringing up the print properties box as happens with going File - print. There is only one printer attached - it is shown in "Printers and Faxes" with a tick. There is nowhere to check it as the default printer as it is the only printer.How can I make the print icon button just do straight default prints again?
View 3 Replies View RelatedI have an old Sony VAIO (running Win Xp) that I am using a print server. The VAIO is connected to a HP PSC. The VAIO is on a wireless network along with two other laptops. One laptop is running Win Xp and the other is running Vista. Everything was working fine as far as printing went until I reinstalled the OS on the Win Xp machine (same OS). Previously the VAIO would go offline due to hibernation and so if I tried to print something from the Xp machine, it would get in the queue and get printed when I turned the VAIO on. Now the print jobs are not getting in a queue when the VAIO is offline.I don't know what I did right before and so I don't know how to remedy the problem.
View 10 Replies View RelatedI installed a new modem the other day cause the old one got fried. Now I am trying to print and the printer keeps giving me an error message, "this document fail to print." I tried all possible troubleshooting techniques but nothing help. I don't know what to do.
View 1 Replies View RelatedPrinter wont print THE printer normally prints fine but now it wont print atall the usb cable is in and the printer wont take the paper it just sits there
CONTROL PANEL> PRINTERS> OPEN and it says its printing just fine but it isnt Its in the front usb hub and tried the rear it dont make any differnence. The printer is on and its got paper etc etc.
i went a bought a digital camera, cept i only have 2 usb ports on my tower, can i add more? one port is for my mouse, and the other is for my printer, i have a lexmark 1185, but the camera needs a usb port to plug it in.
View 13 Replies View RelatedI am trying to get BitPim to work, for those of you who don't know it is an application that will give you access to your cell phone so you can create your own ringtones and what not.
The problem is that it keeps telling me that the COM port is not available.
Is there a way for me to run any report that will tell me what applications are using what COM ports, or how to make a COM port available.
any suggestion?
i have four usb ports all of them are not working
View 1 Replies View RelatedI play online first person shooter games and today my mx510 mouse started malfunctioning. I'd be playing and my mouse would just completely stop working, anywhere from 1-10 or so seconds. I tried using a different mouse, a mx500 and I still get the same problem. I've tried different usb ports, different mouses, and anything I could think of. These malfuntioning occurences happen quite often, maybe 2-3 times every five minutes, and my mouse completely turns off for whatever amount of time. My computer is about 3 years old, but I keep it running like the day I bought it. I plan on formatting really soon, within the next few days and that might solve the problem. Please let me know of any reason this problem is occuring, and what I can do to fix it
View 1 Replies View RelatedI plugged in a digital camera to my Toshiba laptop, but it won't recognize the camera, it also did this with my palm pilot too.
View 7 Replies View RelatedSince I've formatted my computer, it started being slow and I don't know why. Do you have any tool that would help diagnostic the cause of my problem? My USB ports do not work either.
View 11 Replies View RelatedI have a machine which has suddenly stopped responding to any mouse connected to the usb port. The ports appear to still be working as i can access a usb key etc from them. As soon as i plug a mouse in i get an error saying the device may not be installed properly. When checking in the control pannel all devices appear to be fine but the port the mouse is in shows as 'unknown device' it seems to have suddenly lost the ability to recognise when something is a mouse
View 12 Replies View RelatedI was working this morning and I tried to put a flash drive in my usb port (one that I've used forever) and I got the following messages:"Administrator has restricted this computer to access usb/1394 mass storage devices"and "G:/ is not accessable Acess is denied" This is especially troubling for me since I've got to finish working on my syllabi and lessons for school and can't use my flash drive, plus I can't use my ipod, which is really irritating. I thought I was the administrator. I certainly haven't disabled anything at least not on purpose.
View 7 Replies View Relatedhow to find out if I have a USB Port Version 1.0 or 2.0? I need 2.0, is there anything I can do to update the ones I have or can I install new ones in my existing computer.
View 3 Replies View RelatedI recently ought an E-machines computer running XP MCE w/SP2. It has an AMD 3400 processor and 200GB HD and 1MB RAM. I had transitioned all of my files and applications from a Windows 98 machine using Aloha Bob's PC Relocater. Everything seemed to work fine, however, my USB ports will not recognize anything except my printer (no external flash drives or my digital camera - software is loaded onto the computer). I had contacted E-machines tech services and they asked me the usual stuff, like disabling the ports and restarting the machine, check the BIOS to ensure they are enabled, etc. Now they are suggesting I run a ''Non-Destructive'' System Retore. Naturally I will back up my files and apps on DVD, but my concern is will I be able to reload the apps to which I do not have disks for? Is there something elese I should do prior to running the System Restore (in SAFE mode??). Also do you think this will work and restore my USB ports?
View 8 Replies View Relatedim trying to connect a usb port from my mobile to my pc to download music. its taking for ever, is that normal ?
View 2 Replies View Relatedhave just reinstalled windows xp and 3 of my usb ports wont work there is power going to it as when i plug my web cam in the light appears on it looked in device manager and says all ok and all enabled and drivers are ok is there any other settings that maybe block ports thanks dan
View 11 Replies View RelatedTrying to help a friend whose XP system is running very slowly, it does not recognize any usb ports and will not connect to the internet. She is anxious to retain her photos. As she can't put any software on the system to check for viruses etc, the only thing I can suggest she does is to re-install XP. If she does not reformat the disk will her user data still be accessible?
View 7 Replies View Relatedtell me what ports I need to setup through a firewall to get Remote Desktop Connection working.
View 2 Replies View RelatedI was having a lot of troubles with XP PRO after a CPU failure, when I tried to do an XP installation Repair. It failed miserably and after a month of posting and searching for answers, I threw in the towel. I reformatted the HD and did a clean install. On the advice of a MS Tech, I downloaded SP3 and installed it first thing. After I got everything up and running with all the updates, I discovered that XP no longer recognizes my USB ports as USB2. I found some original drivers on the Motherboard installation disk, but it will not allow me to install them because my XP SP2 install disk is already supposed to have them. I tried removing all the USB drivers and forcing XP to figure it out, but no luck. It is an ASUS P5GD2 Deluxe with a P4 processer and an XP PRO SP3 Operating System.
View 3 Replies View RelatedWhen I power up my computer, Windows XP doesn't detect my USB modem or printer unless I unplug the cord and replug it in.
View 3 Replies View Relatedusing win xp pro. just upgraded it from win 98. now my printer that is plugged into the usb will not work......(print) power is on!!.web cam wont work either. windows does not pick up the new devices , put drivers on for camera and it says no camera plugged in! older system.. i think p2 399 mhz 128mb sdr ram.
View 2 Replies View RelatedWhen I start up my computer it will not respond to anything that has to do with my keyboard and mouse. I couldn't figure out why, I mean they came with my computer. The mouse is not even optical and it has a cord. I tried booting into safemode but since the keyboard doesn't work I couldn't. I tried booting from a disk but I have to be able to press any key to be able to do that. I couldn't log onto the accounts because that requires both a mouse and a keyboard. I tried using a different and keyboard that plug into the same ports, which resulted in the same thing. So I used a keyboard for a playstation 2 because it uses USB and I used a mouse I found that hooks up to USB as well. They work fine. However, I want the PS/2 ports to work because I better things to be taking up my usb ports.
View 1 Replies View RelatedMy computer doesn't recognize USB ports upon startup. When I turn it on, it says Floppy diskette seek failure, and I have to press F1 to continue or F2. It's always said that... and my mouse lights up and my key board lights up fine... but when I press F1 and it goes to the Windows loading screen, the lights powers off and the keyboard doesn't work.. and I can't use my mouse or keyboard when it reaches my login screen.
View 14 Replies View Relatedi just reinstalled xp on my laptop and now it wont show up anything when i insert something intothe usb port. the light comes on on my usb stick. but thats all. i checked the usb controllers and the hubs and it says the device is working properally.
View 1 Replies View Related