Reformatting / Partitions - System Recovery / Restore Original
Aug 6, 2005
My Pc has been come crippled with large amounts of spyware that make using the PC more and more diffcult each day. I was planning to complete a full system reformat, or system recovery as my manufacturer describes it. The PC was shipped with two drive C and D, both being a partition of one hard drive. I also added 3 further partitions to D, which means there are actually 5 drives. The computer manual says that when performing a system recovery, you can select to just recover the C partition, but it says that a recovery will provide an image of the PC's software when shipped, so does this mean it will restore the original partitions and lose my current partitions?
View 6 Replies
ADVERTISEMENT
Feb 17, 2007
I have a Compaq Presario Media Center SR2034NX Desktop PC with XP installed from the factory. I needed to do a system recovery that should have put things back to the place they were when I purchased it.10-21-07. It restored things but not back to the original install.Can I do system restore without useing the programs system restore feature? If so, I could restore to an earlier date when things were ok.
View 14 Replies
View Related
Jan 23, 2010
can i get past the login loop if i do not have original recovery or startup discs
View 5 Replies
View Related
May 17, 2007
I did a system restore on my laptop after recklessly cleaning files off of my hard drive. Since then I can't access my d:/, so I can't reinstall anything, including my internet and Microsoft Office software. If I look in the control panel I can see everything (I didn't lose any personal files), but D: always comes up as D:/RECOVERY, then fiendishly warns me not to look inside (which I haven't).
View 2 Replies
View Related
Jun 20, 2005
My computer crashed about a month ago and I had to use a recovery disc to restore my original system.. Everything works fine except when I boot up and following the Sony logo and Intel logo the following message appears "Press F11 for Acronis Startup Recovery Manager. Acronis fatal error Boot drive (partition) not found. Press Enter to try to boot your PC." Pressing enter boots up the PC fine but how can I eliminate the process? I had Acronis on both drives before the crash but it no longer exists.
View 1 Replies
View Related
Oct 18, 2009
What is the Windows Recovery Console command that can create partitions?
View 4 Replies
View Related
Nov 14, 2008
I have recently restored my PC to it's original state as bought from the shop using the Recovery Disk supplied leaving just the Operating System.A friend wants to do the same but has no Recovery Disk. His PC was built by an independent.
Is there a way of creating a recovery disk to do this or is there site to download the relevant info/software.
View 5 Replies
View Related
Mar 9, 2010
I understand the need for system restore to be enabled on the C: drive. But should it be enabled on the d: drive/recovery partition?
View 1 Replies
View Related
Nov 6, 2007
I plan on restoring my HP a330n. The last time I restored I had driver problems with my sound card, and LAN. Is their anyway I can save the driver to disk and apply when restore is complete? Also I DO NOT have my original restore disk, but I have the option to just use the in-system restore option, or create disk. Should I create or does it not matter? Also how can I restore the system completely, the last time i did "Complete Restore" there were still unwanted files in the PC.
View 1 Replies
View Related
Sep 27, 2010
First off, my Default Margins are: Top 1" Bottom 1" Left 1:25" Right 1.25" from the "Page Setup" Menu But when I try to paste into a new doc [right click>New>Microsoft Word Document]the margins, and other settings, I'm sure, can be way off. I finally realized that when I open a new doc, these settings reflect the last saved document's settings, even tho the default settings are as above. This makes for a mess sometimes when trying to paste forms, etc that rely on default settings/spacings. Office XP is too complex for me, but I'm hoping someone knows where/if there is a setting to over-ride and ALWAYS open a new doc with ALL default settings, as if in a new install.
View 8 Replies
View Related
Jun 5, 2006
i am trying to restore my windows xp on an emachine to original factory settings.when i pop the disk in i am getting an error that says cant read R:E17F.GHO. What is that and how can i get this thing working? There is also a message that reads ''Cannot Open GHOSTERR.TXT '' and it also says Floppy Disk(s) fail (40)
View 9 Replies
View Related
Sep 17, 2008
I lost my system recovery disc. I also lost all of my games that came with windows...free cell, solitaire, paint..etc. I just want those back. Can I run a system recovery program on windows without a disc
View 1 Replies
View Related
Aug 23, 2006
I need to do a System Recovery to restore my system back to its factory settings (I'm using WinXP Home). When I hit F10 upon startup in order to access the system recovery, nothing happens- it boots as it would regularly. I was able to boot up using the CD, and am now in the System Recovery console. Might anyone tell me what I need to do to perform a non-destructive, or even a destrucitve system recovery?
View 1 Replies
View Related
Aug 12, 2008
Laptop has become heavily virus infected and needs to be formatted. I do not have original operating system disk. It is out of warranty also. It does not boot up always. How can I format it in order to reinstall windows xp.
View 8 Replies
View Related
Nov 29, 2006
Can someone please help me with reformating my windows. i dont have the original windows cd because this computer was given to me and there is nothing that i want on there.
View 2 Replies
View Related
Jan 30, 2008
When trying to install XP over 2000 I get the following error.no valid system partitions were found etc.Can someone tell me how to fix this.
View 14 Replies
View Related
Jan 16, 2006
i need help putting my system back to it's original configurations. I have this crazy payment demander coming up from movieland.com on something I never ordered and isn't on my computer.
View 14 Replies
View Related
Sep 4, 2010
i got an assembled system i gave a configuration of an original intel motherboard rather than chipset from china.i just want to confirm i got the original one.can you help in recognizing original one.
View 2 Replies
View Related
Feb 27, 2008
I want to reformat my PC but I don't have the windows disc as one never came with it.I have an original version of XP Professional and I don't want to lose it.
So how do I reformat?Is there a way to do so without using an XP disc?
View 14 Replies
View Related
Sep 2, 2005
Is it possible to get to safe mode when you use the original XP CD to boot?
View 7 Replies
View Related
Nov 30, 2005
how do i reformat windows xp home edition
View 9 Replies
View Related
Jul 6, 2005
If someone downloads and runs a trojan and then uses system restore to back
to a system restore point prior to running the virus, is that computer still
infected?Nocturnal http://www.spywaretalk.org
View 1 Replies
View Related
Oct 14, 2007
I have tried to do restore and also recovery with the disc's I burned when I first got my computer, to no avail, a Tech at Best Buy said I may have a spyware called smit fraud on my system and said he could get rid of it for $400.00, I wish I could afford it but I don't even have $4 bucks to my name and my wife refuses to shell it out. I was in a car accident 3 years ago and have lost 70% of the use of my right arm I am unemployed and it is hard for me to do the job I was trained to do which is cooking, I am a Certified Chef of 22 years now I can't even hold a knife. This computer is all I have to keep me from going insane and it has become so slow that it now runs at a snails pace, Please can someone help me? my wife did allow me to upgrade the connection from dial-up to DSL as we got a deal from our provider at $14.99 a month for a year which saves us on the extra phone line and all but the computer is still slow.
View 11 Replies
View Related
Jul 11, 2005
I have WIN XP PRO SP2 on my system. I have a 120G Harddrive. is it possible to reformst to a dual partition, 50% WIN 98 SE FAT the other half XP NTFS ? I dont have my original XP disk So I dont know if I will be able to reinstall my XP off of my backup disc.
View 1 Replies
View Related
Apr 2, 2005
My company was messed up so I decided to clean reinstall xp pro, my hard drive was split into 3 partition, C, E backup and L photos and bits, at the point of the install were you decide,delete our make partitions, I decided to delete L as it was not needed and clean install onto C, leaving E with my docs and data
The install went fine, when I looked at my drives in admin tools the C is marked boot and E system, I was going to delete E and make new partitions, but because it marked as system, can not delete it.How did I do this and is there away to put it all back onto C, without reformatting
View 4 Replies
View Related
Jun 25, 2005
Im trying to FULLY restore my Toshiba Satellite laptop. It came with Satellite RECOVERY discs, but I didn't think those were what I was supposed to use to FULLY restore my laptop. Are they? Normally, on the boot up screens on my desktops, you can press f8 or whatever, and reformat like that. I guess thats because their desktops.
View 6 Replies
View Related
Aug 21, 2005
i partitioned the drive when i first installed win xp. C: was already win98se and i thot i'd keep it around a while just in case., i
had the dual boot workin' fine. but whenever i checked in on ol' win98 i got the error message about...whatever. i didnt care cause i never did have a case wher i needed it. so i just always booted to the winxp, which was the second partitioned, named E: and i figuerd one day i would just lose that win98 and make the whole drive winxp. the occassion arose when E: winxp wouldnt boot, error: corrupted system file. it seemed like a "good day to die" so i loaded win xp (pro) into that first partition, C:,and it just fit but with little room to spare. in fact,not enough to do anything, including loading antivirus. i acn still read everything on the E: logical partition, but i dont get to boot from there. i have a couple big eexternal HDD's oneon that machine, the desktype machine (250GB) and one on the laptop (400GB) which runs win xp. i can resort to moving things around, probably having to re-install a lot, but i have tried re-sizing the C: and E:,using Partition Magic (8.0) to no avail. it makes no changes. i've tried enlarging C: to use up the unused space in E:. when i re-boot,nothing has changed. tried merging the partitions, error is differnt cluster sizes, one is 2k, the other 4k. have tried to change the cluster sizes both ways. still no change.
View 3 Replies
View Related
Jan 6, 2007
Now I cannot boot without the 120GB plugged in (tried unplugging the drive and booting and it said the it was Unable to boot from disk or something). I eventually deleted the partition on the old drive in setup and then canceled setup, and I still couldn't boot. So I reinstalled winXP on the old drive and now it boots fine. Of course what I have to do is reinstall XP with the drive unplugged, but do I have to completely redo everything, or can I somehow reinstall without starting from scratch? I've tried using the setup disk in windows with the drive unplugged (I know it isn't safe to unplug drives with the computer running but I had run out of ideas), but it said that it couldn't reinstall windows because there was no valid System Partition (which is on the other drive.
View 6 Replies
View Related
Dec 9, 2004
Can anyone advise me on formating or reformating my hard drive. I am running windows xp pro and have a 20 gb maxtor hard drive. This is formatted as NTFS as one partition. I tried from windows explore and from my computer. I also tried to change to 32 bit partition. Can I do this with fdisk, if so how?
View 11 Replies
View Related
Jan 20, 2007
I was reformating my pc and when i clicked to delete a partition it said it was unable to delete it thus not being able to continue reformatting. I tried almost everything (making a boot disk,...) and i dont knoe whats wrong. I've been able to reformat before but i dont know why. My system is NTFS I'd
View 6 Replies
View Related
Nov 10, 2008
A friend gave me her Compac Presario 2100 to wipe clean to be sold.I reformatted the hard drive and now the computer will not boot. The machine runs for about 15 seconds and dies. Running XP Home.
View 4 Replies
View Related
