Im trying to FULLY restore my Toshiba Satellite laptop. It came with Satellite RECOVERY discs, but I didn't think those were what I was supposed to use to FULLY restore my laptop. Are they? Normally, on the boot up screens on my desktops, you can press f8 or whatever, and reformat like that. I guess thats because their desktops.
I have a advent 9515 laptop and i have lost my recovery disc can any 1 tell me where to get a copy of it that dose not cost a bomb cause i have a virus on my laptop and need the disc.
I'm getting very nervous that I haven't made these impt system recovery discs.I bought 10 CDs at the time I bought PC and was assured they were the right type.When I got ready to create the discs, my PC said I would need 18 CDs.I backed out at that point so don't know if the ones I have are the right kind.I'm going out this week to buy some more, but still have doubts I'm getting the right kind.My HP guide says I need: CD-R.What I have is: SONY CD-R AUDIO (compact disc digital audio recordable.
i have an acer desktop and i would like to re-install my xp . I was given two discs with my system with the first being titled " system cd " and the second labeled " recovery cd " The system cd is tagged as disc 1 and the other as disc 2 . Am i correct in saying i install the first , then the second for a complete re-installation of XP ?
I want to reinstall XP with the recovery discs I made the first week after my puchase and that was 3 years ago. I am pretty clear about the procedure and I have already made a backup of my documents, pictures and music on a USB external harddrive. My question is what other info is required and will I need to do a product activation process ? I am also installing Service pack 2 for the first time because mirosoft will not support SP1 users after October 10, 2006. The last question is I have 3 pop-email accounts, yahoo, hotmail, gmail and will all the mail be destroyed or will it still be on the server after the re-install ?
As some of you may know I recently aquired a netbook. One of the first things that popped up above the systray was a notice to create some recovery discs. Well the little thing didn't have a burner so I pressed "Ask me later." It took a while but I finally got around to buying, hooking up and downloading the software.
After burning the first disc I got a pop up to put in the second blank disc. Along with that popup was a warning to create these discs right away, before "Using the computer." A fine time to tell me. I was rooting around in the computer for a week. I just kept clicking "ask me later." There seemed to be no sense of urgency. I completed the second disc but am now wondering if I wasted my time.
I bought a HP Pavilion a4210n with windows xp media edition installed. I created the discs as told but am not sure I did it right therefore am afraid to use them to do a total system restore. Does F10 work on my computer and do I push anything with it?(like ctrl)
My old laptop died and I now have a brand new, factory sealed Toshiba Satellite Pro, model L300. It came with trial versions of MS Office. I don't want to use the trial version since I have a perfectly good version that I porchased a few years ago. (It's the Teacher and student Edition 2003.) At first I tried installing the 2003 version that I own. It seems to go through the install procedure to the end, but when I try to open OUTLOOK, I get an error that states the MAPI32.DLL" is corrupt.
I spoke with Toshiba but they were not a great help. The told me to go the ADD?Remove and remove the MSOFFICE trial version, which I did. I also removed the 2003 Version so that I could "start from scratch", so to speak, trying to keep things "graceful". The same error occurs after installing the 2003 software, and oddly, some of the 2007 software still seems to be there!. Probably residing in the registry somewhere.
how to boot from CD on a Travel mate 2410 so I can install a fresh copy of Win XP, the problem is Ive changed / unchecked some of the start up settings in MS Config, re-booted and now the laptop loads with missing files such as: winlogon, dlls missing etc, then re-sets, Ive tried safemode but still show missing start-up files, F2 for (Phoenix Recovery Bios Utility) but dont know the password, tried comos, phoenix, 000000 and bios as the password but with no luck.
I have a TOSHIBA SATELLITE A100 LAPTOP. PART NUMBER, PSAA8C-SK800E. It is not even a year old however i want to do a clean install of WINDOWS XP. The problem is, He nor I, never recieved a RECOVERY DVD when he originaly got this laptop last september. The laptop is still under warrenty until september 15th 2007, i just need to know how or where to get the recovery dvd. I searched the toshiba site, but i dont know where or what to do or go.
I have a Toshiba laptop that I would like to reinstall/restore to the factory delivered state so username wizard etc opens on next reboot. I don't have the recovery CD. There doesn't seem to be any EISA partition on the machine, but there is an I386 folder in C:, is that sufficient? Code: partition 1,C:(55GB)I386 TOSHIBA WINDOWSpartition 2, D: 55GB
We meant to do the system restore to a previous date, but instead it appears we reloaded the original configuration. There's no undo option and the only system restore date now offered is today. We've lost everything we ever put on the laptop. Is there any easy way to get it all back?
laptop is about to get a bit of an overhaul. Extra RAM should be here tomorrow then I'm gonna wipe it and reinstall XP. It's an Equium A60 as far as I can work out (similar/same as a Satellite A60?) running XP home. She can't find the recovery disk (if it even has one?) and I only have XP Pro, Can I use my XP pro the same way as I would on a normal desktop? Stick the CD in and boot from it to install a fresh OS? Is there anything I need to look out for on a laptop?
I've had this computer for 4 1/2 years, it actually runs pretty good still. I wanted to extend it's life a little longer and get rid of some clutter so I formated my hard drive and was going to reinstall Windows XP.The "Recovery CD's" that I have for my system aren't working. So I used another copy of XP that I had and it's all up and running now. Only problem, the monitor drivers are on the Recovery CD's and now I'm stuck with a 800x600 screen resolution on a wide screen monitor.The specs I have, give the monitor as being 15.3" wide. I don't know where this number came from. it's a Desktop/Laptop Hybrid of sorts.And yes, I have checked my Display Properties, it only lets me select 800 by 600 pixels, I can't slide the bar down or anything.
I have tried to do restore and also recovery with the disc's I burned when I first got my computer, to no avail, a Tech at Best Buy said I may have a spyware called smit fraud on my system and said he could get rid of it for $400.00, I wish I could afford it but I don't even have $4 bucks to my name and my wife refuses to shell it out. I was in a car accident 3 years ago and have lost 70% of the use of my right arm I am unemployed and it is hard for me to do the job I was trained to do which is cooking, I am a Certified Chef of 22 years now I can't even hold a knife. This computer is all I have to keep me from going insane and it has become so slow that it now runs at a snails pace, Please can someone help me? my wife did allow me to upgrade the connection from dial-up to DSL as we got a deal from our provider at $14.99 a month for a year which saves us on the extra phone line and all but the computer is still slow.
My boss has two laptops both toshiba his older one a satellite 1110 his daughter had being using and was full of junk he asked me to run the restore disk ive used the wrong disc I now have the corredt discs to hand including the windows xp start up. I also dowloaded a 6 disc floppy boot up for xp but cant get the laptop to boot into anything . Ive been into the bios and set and tried booting from both options but all i get is a screen giving me the option to start in safe mode and last know configuration when i choose safe mode i get a page of geek all starting with multi(0)disk(0)rdisk(0)partition(1) WindowsSystem32Drivers all with different logs all ending in.
I had done the PC recovery with HP back to factory defaults.I still have some of my software that i had before the recovery. I was wondering if there was a way to recover the Files i also had before the recovery.
I have a Fujitsu Lifebook N Series. I have a virus that freezes everything up. Nothing works and I would like to start fresh. However I can't find my recovery disk or Windows Disk. My labtop still has the Windows XP Home Edition sticker on the bottom with the code.
I had just turned our home into a wireless environment.....all machines working well. had just downloaded Service pack 2 from Microsoft site....and laptop crashes and I have to do a Non-Destructive reovery. Many, many data have not re-appeared.
I lost my recovery diskett to my laptop. my daughter dropped the laptop and now it is giving me a error msg at start up and i can't get it started at all. say something about disk writing error. anyway.how use the recovery diskett? but i can't find mine.
I tried to install the Recovery System, from the original disc, onto a 2-year-old Gateway laptop, but appartently the TrayApp file (whatever that is) on the disc is corrupted. I can't get a new disc because Gateway no longer carries them. What else can I use? Can I buy a Windows XP (the original OS) update and install that? Can I use the recovery disc from another brand of computer, like Dell?
My niece installed drivers for a Kodak camera on her HP laptop at the weekend. Everything seemed to go fine until she switched the machine on the next day, when it failed during the boot. She's reasonably tech competent so by the time she called me she'd tried all the safe mode options with no luck: it would get up to mup.sys in the boot and then reset. I did try to access the HP Recovery software, but it just comes up with a pale blue blank screen and a windows-style pointer and stops there.
I made 3 recovery disks for my hp laptop and ever since i posted the "my laptop wont turn on" ive been having problems with system recovery. i want to system recovery, put the first disk in, formated the hard drive, let the recovery manager put the disk files on the laptop, and let it restart. now what do i do, there are 4 options. i need to do the other 2 disks, and if i try to use the computer, a popup says "system not fully installed. run setup again." Now what should i do? my parents hate windows vista and i dont want to put factory installations and stuff back on it, because it had vista.
I got blue screen of death on my laptop and it keeps on restarting before the window can actually boot up. It show's this message and reboots every single time when starting up Windows XP. I tried recovering the windows from the Recovery CD but it goes to the Gateway Symbol n freezes there and I have to restart the system every single time and try to boot from the recovery CD. it goes searching for recovery date on the hard drive and if not found any it will boot the recovery cd. but it goes to this scan and just freezes there with running the recovery data from the cd.
I have a Compaq Presario 2700US laptop running Windows XP Home and SP2. I purchased a new battery course the old one would not charge nymore. Now, this one will not charge either. I don't know what the problem could be. I have had a few issues with XP and run a recovery console when I need to. What steps do I need to take to get the laptop to recognize the new battery