Programs Will Not Install / Goes Back To The Standard Cursor
Sep 8, 2006
I finally broke down and went from W2K Pro to XP Pro on my new build. Almost all my apps have installed just fine but two that I need will not. They are NetObjects Fusion 7 and Adobe Elements 2.0. Both are fairly new, around 2002 or 3 releases and both are rated for XP but once I launch the setup.exe the hourglass shows for about 5 seconds and then goes back to the standard cursor. I checked the Task Manager and in both cases setup.exe is loaded and running and I have to End Process to try the setup again but the same thing happens each time to both apps. They both installed fine and I've been using them for years on my W2K Pro machine.
View 14 Replies
ADVERTISEMENT
Jun 26, 2005
I changed it by accident one day, and I am wondering on how to get it back to the standard clear color.
View 2 Replies
View Related
Mar 26, 2008
I did an XP update and installed all the Windows updates. Now I cannot install my Radeon SE-DT graphics drivers. I get an "installation failed, try to install standard VGA drivers" note after the most current downloaded driver installation program runs InstallShield. I'm running on an ASUS A7V motherboard (1011 BIOS) with AMD Athlon processor and 768 MB of Crucial RAM; 2GB Maxtor drive. I'm using LiveOne Care for security.I'd lime to know if the motherboard chipset drivers can be updated from within Windows without doing the floppy disk boot.
I'm running graphics on the VGA save mode and it is goofy scrolling down a screen watching the waves as the data clunks in. Can anyone suggest an easy install? ATI Radeon has been no help so far. By the way, Device Manager shows no video display components from which verify or update drivers.
View 4 Replies
View Related
Nov 6, 2006
I have a Dell Inspiron 6000. I find the cursor involuntarily slipping back while typing and also the scroll function of the tough pad not functioning. Dell had got the touchpad replaced. The problem is continuing.The slipping back is now less frequent. I had downloaded the driver for the touch pad. Then the scrolling revived. [On downloading the driver, the Mouse Properties had 10 tabs as against 5 earlier including the tab "scrolling"]. But again I have now only five tabs in the Mouse Properties. Can any of you help me to get over these to problems?
View 2 Replies
View Related
Mar 21, 2006
OK, I don't know *what's* going on, I'm just hoping it isn't a virus. Whenever I'm typing, be it an email, posting on a board like this etc, my cursor will suddenly jump back up a few lines or even way back up into the subject title field. It's very annoying, as I've got to constantly mouse to where I belong to fix typing over previous sentences.
View 17 Replies
View Related
May 14, 2008
Is there any way I can back up the programs I have installed on my computer without having to go through the whole process with the installation CDs?
View 20 Replies
View Related
Jun 22, 2009
When I start my PC the only thing that appears is the wallpaper and the mouse arrow which does move but no right click. I've tried SafeMode and get only the words Safe Mode in four corners so I can't do a system restore. I've tried restoring to last known good configuration but I get the wallpaper again.The only thing I can think of doing is a full restoration but I have 300 itunes on my hardrive which are paid for.
If anyone has an idea how to get my programs & icons back, I'll try anything.
View 5 Replies
View Related
Aug 16, 2009
i started a clean install of xp sp3 from a genuine disc, but after formatting the partition and copying files and restarting, the screen gets stuck and all i get is the cursor blinking furiously. I then tried to install some not-so-genuine copies, but no matter what i use, its the same problem. I tried installing linux and it went fine.
View 3 Replies
View Related
Jul 4, 2010
I feel so dumb, It's been forever since I created a desktop shortcut, and I wanted to create a shortcut for my Canon Utilities file - from my Program bar on the Start Menu. Long story short - I accidentally moved the file to my desktop and cannot get it back to the program list on the Start menu.
View 4 Replies
View Related
Sep 2, 2010
I downloaded a program and found out that I cannot delete it. Every time I turn on my pc It comes out and every time I log out, it stay on on my pc. So, I deleted it and then I discovered that all my programs became a executable link.
View 3 Replies
View Related
May 22, 2007
2005 MCE WIN XP, if i go to START, ALL PROGRAMS, and scan thru my programs, the amount of time to scroll thru programs is about 3-4 seconds, before it closes out, also RENAMING a folder, on desktop, same thing happens, for instance, renaming a folder PICTURES, i get to PIC, then it kicks me out. I have OPtical wireless mouse, replaced batteries with fully charged ones, no difference, also mouse 12 inches from reciever.
View 2 Replies
View Related
Feb 19, 2005
Under the 'add/remove programs' there is a list of programs, that i did uninstall a while back. So now when i click on uninstall on it in the 'add/remove programs' window, it does nothing but stay there. This must be because its still in the registry. The program is called 'Micrografx'.
View 7 Replies
View Related
May 7, 2009
We just got a couple new Dell Optiplex 360 w/ XP and we need one to run SP2, not SP3. However, because we didn't update the machine--SP3 came w/the factory install--all the instructions I've found for uninstalling SP3 here and elsewhere don't apply as far as I can tell.1) Add/Remove w/ updates checked shows no service pack updates, SP2 or SP3 2) Windows Update history likewise shows no service pack updates 3) System info shows SP3.
The reason for the back up is the Cannon IR1310 printer attached to the machine locks the computer for 20-30 seconds before each print job. Updating drivers has not helped and we had the same issue with the last machine in that office--we had to back that up to SP2 after installing SP3 for the same reasons. No problems with network printers, just the local one and I think it is a printer-incompatability problem when using SP3.
View 3 Replies
View Related
Sep 6, 2007
first and foremost is considering I have all of the old videos, files, pictures etc on my 80 GB Maxtor that I plan on transfering to the SATA hard drive since it's faster and I'd like to use the SATA as my primary...so all in all that makes things complicated in itself.
What I did was got everything ready, I didn't back up anything from the Maxtor (IDE) because that is out of the plan since I hope to do a simple drag and drop transfer of all the old stuff to my new SATA hard drive. I went into my BIOS and set the boot priorty to the SATA and it detected my SATA drive fine. I got out of the BIOS and inserted my Win XP upgrade disc. I let it go and also inserted the SiS 964 RAID Installation support disk so that it would install the SATA controller that was included in the Foxconn mobo. Then keeping my IDE drive intact, I deleted and formated the SATA to create a partition and installed XP on it......
View 5 Replies
View Related
Dec 15, 2006
My computer didn't come with an XP CD, just the manufacturer's restore CD which will wipe out all I've done in the last four years. So, if I backup (copy) all the files on my C drive, except the Windows folder (assuming that's where all the OS files are), to an external drive, then run the restore CD which will revert the computer back to the way it was when I bought it. Then download and install SP2 and copy the original files back to C.
View 3 Replies
View Related
Aug 31, 2010
I can't install acrobat 9 standard in my laptop.
View 2 Replies
View Related
Jul 29, 2007
I have a rig with some form of linux i put on there months ago and now i want to install xp home sp 2 on it. i have done many xp home installs and im using the disk from my good rig the one whos specs i have listed because i just put vista on this one. now whenever i put in the xp home disk it starts like normal by saying press any key to boot from cd.... i hit enter and then the black backround stays but no text ever appears. after about 10 min the drive stops spinning.
View 4 Replies
View Related
Aug 12, 2005
Apparently, XP Home has eaten one of its own. How to get Paint back?
View 2 Replies
View Related
Sep 30, 2005
Since there are 8 bits to a byte there can be a major misunderstanding with abbreviations. Are there standard abbreviations for bits and bytes? I always assumed bits was small b and bytes was capital B. Is this true? 100 MB - mega bytes. 100 mb - mega bits.Is a 56k modem 56k bytes or bits per second?Can I assume everything is bytes unless bits is specifically stated?
View 1 Replies
View Related
May 23, 2007
Just put together my new system and all is working well, but I am left with this unknown exclamation in the "device manager". I can't figure out what it is.
The only thing device manager says is,Location: on PCI standard ISA bridge The drivers for this device are not installed. (Code 28) and in the conflicting device list it says Memory Range FED00000 - FED00FFF not available.
View 3 Replies
View Related
Oct 31, 2008
I need to add a printer using TCP/IP but when i click on local_printer > create a new port...the standard tcp/ip option is not there.Local Port is there but NOT Standard TCP/IP. Can this be restored and replaced?
View 3 Replies
View Related
Aug 2, 2010
OS: Windows XP SP3
Realtime Security Software: Avast!, ThreatFire,
Non-Realtime: Spyware Blaster, SuperAntispyware Scanner (Free Edition), Malwarebytes' Scanner
Firewall: COMODO Firewall Only
My Standard Account got reset for the 2nd time. Firstly, when I didn't use my account for 4 days once I came to log on I realised that 'Personalized Settings' was showing up at the top left hand corner. This came again after I didn't use the account for one day. By reset I mean, the background wallpaper reset to default and the desktop folders not showing up. But when I went into 'Documents and Settings' in my administrator account (which didn't get reset), all the folders were showing up in my C Drive/Documents and Settings/ folder. Once I right-clicked on a folder on my system when this happened for the first time, my system froze. The system also froze when opening any file. This started happening a few weeks after I had installed COMODO Firewall which might be a coincidence even though I don't think it is but all these error messages/dialog box popped up on my account, roughly like 'Invalid or corrupt jarfile...' but on the administrator account none of these errors showed up when this happened on my account. In addition, this issue also happened when I changed my account from Standard to Administrator but this didn't change anything. When this happened for the first time, to solve the issue I made a new account and then copied all my files/folders over from my old account to the new one but because this problem has happened again, I predict that this will keep on happening again on every new account I make. I have also run malware scans which didn't detect any viruses.
View 2 Replies
View Related
May 20, 2006
eMachines PC, less than one year old, running XP Home (ugh)While in the "Owner" administrator account, I attempted to change the user rights for my daughter from "Restricted" to "Standard user". I used the "control userpasswords2" screen rather than the standard User Accounts control panel provided with XP Home.I immediately received an error message, stating something like "this account type cannot be found" or "this account type is not supported".No big deal that, but what occurred after that stymies me. My daughter's account is no longer visible in either of the account management control panels, and is also no longer visible in the Welcome Screen. All of her folders still exist.I attempted to re-add the account, but the system (perhaps wisely) prevents me from doing that, stating that the account still exists. Using the XP Home User Accounts control panel, I turned off the Welcome Screen; user login now uses the oldskool screen within which you have to enter the user account name in one field and the password in the other. My daughter is able to login that way.
View 6 Replies
View Related
Feb 23, 2005
I am having trouble to install some programs, I get this message: "The systems administrator has prevent policies to prevent this installation." Thats the message I get when i tried to reinstall office xp pro, also, i get the same message when i tried to install Diskkeeper 7, 8 or 9.I have XP Pro SP2 with the latest updates I am the signing as the Administrator..in fact, there is only one user.Mcafee antivirus
I have try to disable firewall.
View 4 Replies
View Related
Nov 23, 2009
I have a new problem, or at least new to me. My computer was shutdown without my knowledge, and all the peripherals disconnected and the entire unit set in the floor. (My wife moved out, and took the desk as well as her USB hard drive.) Now, when I booted it up, it keeps trying to install programs that are already there. When I tell it to cancel the installation, it just does it again. It keeps repeating this process for 6 or 7 tries, then quits for a few minutes. After a few minutes pass, it does it again. I've done a virus scan with AVG, scanned it with Spybot S&D, and nothing shows up. I've tried a system restore, but it will not restore to any point before today.
View 9 Replies
View Related
Apr 21, 2006
I want to replace my standard mail notification with a wav file I've downloaded.
I went to; control panel/sounds and audio devices/sounds,and replaced it. It plays fine when I get mail, but the old notification plays after it.I removed the old notification before adding the new wav file and it still is happening.
View 4 Replies
View Related
Sep 7, 2005
Is there a way that you can restrict access to the standard games that come with XP? I have gone in and put them in the list of disallowed applications by the executable name but would prefer a GPO setting to not show the menu at all and disable the games for the corporate network.
View 1 Replies
View Related
Jul 2, 2009
My software in the program list eg. avg, microsoft office, logitech, icons have changed to the standard/default icon instead of the icons that come when installing these programs.
View 11 Replies
View Related
Feb 17, 2008
Standard XP screensaver utility stopped working. Any guesses on where I could or should start looking to fix?
View 5 Replies
View Related
May 3, 2005
I just upgraded from windows ME to Xp, Anyway I probably did somthing wrong in the settings because when I try to install a program, it by default chooses an install path in the program files directory in my D drive. I really want these to go to program files in the C drive like normal though. How can I change the default install path or drive for new programs?
View 6 Replies
View Related
Oct 21, 2005
I just bought a new gatway laptop M460, When I go to install some programs, like any of my games, it tells me i do not have administrator privlages. although I am logged on under the administrator account. Also I try to create a limited account and it will not let me do that eather. some one in an microsoft class told me the sids were not right? if so how do you fix this? it has XP professional a 40 gig, and a gig a ram.
View 7 Replies
View Related
