Just put together my new system and all is working well, but I am left with this unknown exclamation in the "device manager". I can't figure out what it is.
The only thing device manager says is,Location: on PCI standard ISA bridge The drivers for this device are not installed. (Code 28) and in the conflicting device list it says Memory Range FED00000 - FED00FFF not available.
I have installed a targus 7 port powered USB HUB on my computer. Device manager reports unknown device. I have deleted and it restalled the drived after the system rebooted. Device manager still saying unknown device. Their is not driver needed according to the manufacture. When the PC is booting it does see the IPOD mini and the Flash drive. But once the PC is fully out and login and I look a the device manager is still reporting unlnown device error (code 10).
View 1 Replies View RelatedLast night I installed ATiTool 0.24 over my 0.25 version (stupidly). I also did a BIOS update and installed Cat6.3 and then AVIVO converter. When I rebooted, I had this new PCI device requiring a driver,but it's an unknown device and doing an auto update helped me.I can't get rid of this pesky PCI device (tried uninstalling but Windows detects it again after restart/boot-up). All my stuff is working, so I don't know where this critter came from?
View 1 Replies View RelatedI have a huge problem with two unknown devices in my "Device Manager" after formating and reinstalling fresh copy of Win Xp Pro.In my "Device Manager" there is two lines with Unknown devices.
View 10 Replies View RelatedI'm using Win XP SP2 . I installed a second CD rom drive which was obviously no good because it caused the other one which is perfectly ok to show up in the bios as an unknown device. Both showed up in the bios as unknown device but the the first still showed up in system hardware the second one didn't.I removed the second one from the computer and the first one then showed up accordingly in the bios as the proper device but the bios is still saying the second one is an unknown device. Every time I start my computer I get the message secondary device missing press the F1 key to continue.
View 4 Replies View Relatedi installed an usb device,and all the drivers for it,it worked for two days, it was recognized.Now it will not recognize the device.I have tried uninstalling and reinstalling the device drivers, all the software that used the device. and even tried to install the driver by locating with 'have disk' browse. i have tried all the directories that the drivers were installed to, and then some. and also the install disk. Device manager says that its an unknown device, and theres no problem with it. but will not update to the proper drivers. How can i alleviate this problem short of reformatting my computer.
View 2 Replies View RelatedI have a Gateway 710X running Windows XP Home Edition which has been patched up-to-date.Connected to this is a Western Digital 80Gb external hard drive Model Nr WD800B005-RNN) The drive had been connected to the USB port for a long time without any problems in access. Tonight, however, it seemed to have been discovered as disconnected, and we reconnected the USB cable.Upon reconnection, we get pop-up windows in the lower right corner which state: (1) Found New Hardware: USB Device then switches to (2) Found New Hardware: Unknown Device then appears (3) Found New Hardware: Your new hardware is installed and ready to use then appears (4) USB Device Not Recognized
View 8 Replies View RelatedI have a Gateway 710X running Windows XP Home Edition which has been patched up-to-date.Connected to this is a Western Digital 80Gb external hard drive Model Nr WD800B005-RNN) The drive had been connected to the USB port for a long time without any problems in access. Tonight, however, it seemed to have been discovered as disconnected, and we reconnected the USB cable.Upon reconnection, we get pop-up windows in the lower right corner which state: (1) Found New Hardware: USB Device then switches to (2) Found New Hardware: Unknown Device then appears (3) Found New Hardware: Your new hardware is installed and ready to use then appears (4) USB Device Not Recognized
View 1 Replies View RelatedI installed all the Windows updates and loaded the drivers off the utility disk that came with the motherboard. I also got the updates from the GIGABYTE website. The utility app shows all drivers are installed correctly. It took me a couple of days to get audio to work because the initial driver load got corrupted somehow and it wouldn't let me reinstall until I deleted the driver's entry in the registry. After that I was prompted for the driver again and it installed fine and sound finally started working. Everything appears to be working and there is only the one Unknown driver in my Device Properties and it's really irking me. All my drivers were installed correctly in my previous installation
View 2 Replies View RelatedI just installed Windows Xp on a puter. After installing all the drivers including the video card drivers from ATI's website the computer discovered an "unknown device on ATI Radeon X700"The motherboard is a gigabyte 8I865GME-775-RH and obviously a X700 Radeon Video Card. AGP drivers, chipset drivers and the like are all installed. The video card showed up as an unknown device when I first installed, I put in the catalyst drivers and it detected successfully, upon reboot this new unknown device came up and I can not seem to find any drivers for the thing. I tried reinstalling the catalyst drivers as well to no avail.
View 6 Replies View RelatedI don't have sound and haven't for the past few days and then this morning a Found New Hardware Wizard keeps popping up trying to install software for an Unknown Device on High Definition Audio Bus.In the Device Manager, there are yellow question marks near Other Devices and then below it, in sub categories is a list of at least 20 (!) Unknown Device on High Definition Audio Bus.In the Audio Device section, there are NO Playback Devices, NO Recording Devices, No Midi Playback and the same in the Voice section. Usually I have Realtek listed there.
View 2 Replies View RelatedHelp with Unknown Device (media reader)wont find anything related to this
View 9 Replies View RelatedAll of a sudden, the imaging devices attached to a computer with Windows XP Pro SP2 are showing up under the Unknown category in the Device Manager. The
devices are listed correctly by their names under Unknown, but the software won't communicate with them.Windows can see the devices, but it does not know what type of devices they are. It is only the imaging devices. One is a Canon 4200F Canoscan scanner, the other is a Sony Camcorder, and the third is a hardware capture device (Pinnacle Moviebox). The Canon scanner is a USB 2.0 device, while the other two are attached through firewire ports.
I installed a fresh copy of WIN2000 on my IBM Thinkpad A21m but I am having a problem setting up a device in Device Mangager. I have no idea what is going on.
When i reboot the laptop it prompts me that it has found a new piece of hardware and it wants me to install the driver for it. The problem is that I have no idea what device it is since all the devices that should be working are working - so i don't know what to do.
The clues that I have noticed that might help:
- the laptop takes a LOOOONG time to boot up (3 or 4 mins), and is sort of sluggish in operation (compared to how it ran when i bought it)
- my internet connection is super slow ( I have a DSL router that serves 3 computers incl. mine, the other two have XP and everythign runs smooth)
- the unknown device says it is located on the the "Microsoft ACPI-Compliant Embedded Controller"
Would any one know what Device this "Unknown Device" is??? I just need to know so i can install the driver so my system can run properly.
I have a bit of a problem, for some reason my system is showing "unknown" in my device manager, the only hardware that has been installed on this system is a new video card, (radeon HD5570) that seemed to go in without a hitch. Simultaneously, with this appearing I started having issues with windows media player not play .mod files, using web help it says that I need to update my audio drivers, but according to Dell they are good. Would really like some help with this.
View 14 Replies View RelatedEverest shows 3 unknown devices but device manager doesnt?my soundcard dissapeard today, i can still pick it up using "Unknown Devices" and EVEREST although when i try to run audigy 2 drivers, it`s telling me there are no supported devices in the system, anyone know how i can force the REAL device manager to see these devices?it seems only everest and unknown devices is picking up my soundcard, it also says AUDIGY from CREATIVE. it just is not appearing in device manager for some reason so i am unable to actually install it.
View 8 Replies View RelatedI created a mess (but I'm learning more each day), and after a week got it going at least, but on boot got messagae "primary hard disc drive 1 not found" which required clicking F1 to continue. I ended up reinstalling XP, got everything up and running, but still have the HD message at each boot. I've passed all of the diagnostics in Set-Up, and found nothing on any of the troubleshooting sites that helped. Set-up says: Primary Drive 0 - Hard Drive; Primary Drive 1 - Unknown Device; Secondary Drives 0 adn 1 are both CD-ROM Readers. Everything works just fine, but I'd like to figure the drive problem. I had to create a partition for the reinstall - had no choice.
View 3 Replies View RelatedRecently I have not been able to access my flash drive from the USB ports. Whn I check the device manager I can see the drive but it is listed as unknown device. What would be a good fix? I am using XP.
View 6 Replies View RelatedFrom what I gathered, he connected a Network Bridge card to his laptop (windows xp) so he could improve his XBox online gaming speed and his computer hasn't been the same.He is unable to go online.Here are some details: he has 2 network bridge icons that he can't delete. He has 2 internet cconnections (apart from his DSL connection which isn't connected) that appear to be connected to who knows what. So that is 3 connections running when he should have just 1.When he tries to connect to the internet, is may show he's connected on the bottom toolbar but the window shows says he is not. Everything runs slow. He cannot open the Network Connections Wizard (whatever it is, i have a mac). When he tries to shut down it takes really long. So basically everything isn't running the way it should.
View 6 Replies View RelatedI use a an Asus WL-330g wi-fi 802.11g wireless ethernet adapter to connect to a 802.11b wireless router, the SMC7004VWBR. The wl-330g works fine when directly connected to the computers ethernet port.However, I want to use a hub.
View 7 Replies View RelatedI have tired to get rid of this bridge connection that is on my local area connection. I try to remove it with the bridge connection area and all it says is "To create a Network Bridge, you must select at least two LAN or High-Speed Internet connections that are not being used by Internet Connection Sharing." I have AT&T hig speed internet and tired talking to them and they said it was on my end, plus I spend two hours on the phone to someone who doesn't know much english and not alot about computers. So can someone please help me. The only way I can connect to the internet is through the my D-Link router which sucks
View 4 Replies View RelatedI have a Sabrent SBT-EKU25 external enclosure with a 2.5 inch hard disk in it. This is a USB 2.0 drive and whenever I connect it to USB 2.0 port, it is not recognized (or "recognized" as an unknown device" ) on all my machines. It however is recognized as a drive and works fine on one laptop which has only USB 1.1 ports.I have tried separately powered USB hubs as well without success. So I don't think it's a power issue.I have even tried deleting all USB devices in Device Manager and let the machine rediscover them.
View 2 Replies View RelatedI did an XP update and installed all the Windows updates. Now I cannot install my Radeon SE-DT graphics drivers. I get an "installation failed, try to install standard VGA drivers" note after the most current downloaded driver installation program runs InstallShield. I'm running on an ASUS A7V motherboard (1011 BIOS) with AMD Athlon processor and 768 MB of Crucial RAM; 2GB Maxtor drive. I'm using LiveOne Care for security.I'd lime to know if the motherboard chipset drivers can be updated from within Windows without doing the floppy disk boot.
I'm running graphics on the VGA save mode and it is goofy scrolling down a screen watching the waves as the data clunks in. Can anyone suggest an easy install? ATI Radeon has been no help so far. By the way, Device Manager shows no video display components from which verify or update drivers.
I can't install acrobat 9 standard in my laptop.
View 2 Replies View RelatedI changed it by accident one day, and I am wondering on how to get it back to the standard clear color.
View 2 Replies View RelatedSince there are 8 bits to a byte there can be a major misunderstanding with abbreviations. Are there standard abbreviations for bits and bytes? I always assumed bits was small b and bytes was capital B. Is this true? 100 MB - mega bytes. 100 mb - mega bits.Is a 56k modem 56k bytes or bits per second?Can I assume everything is bytes unless bits is specifically stated?
View 1 Replies View RelatedI need to add a printer using TCP/IP but when i click on local_printer > create a new port...the standard tcp/ip option is not there.Local Port is there but NOT Standard TCP/IP. Can this be restored and replaced?
View 3 Replies View RelatedOS: Windows XP SP3
Realtime Security Software: Avast!, ThreatFire,
Non-Realtime: Spyware Blaster, SuperAntispyware Scanner (Free Edition), Malwarebytes' Scanner
Firewall: COMODO Firewall Only
My Standard Account got reset for the 2nd time. Firstly, when I didn't use my account for 4 days once I came to log on I realised that 'Personalized Settings' was showing up at the top left hand corner. This came again after I didn't use the account for one day. By reset I mean, the background wallpaper reset to default and the desktop folders not showing up. But when I went into 'Documents and Settings' in my administrator account (which didn't get reset), all the folders were showing up in my C Drive/Documents and Settings/ folder. Once I right-clicked on a folder on my system when this happened for the first time, my system froze. The system also froze when opening any file. This started happening a few weeks after I had installed COMODO Firewall which might be a coincidence even though I don't think it is but all these error messages/dialog box popped up on my account, roughly like 'Invalid or corrupt jarfile...' but on the administrator account none of these errors showed up when this happened on my account. In addition, this issue also happened when I changed my account from Standard to Administrator but this didn't change anything. When this happened for the first time, to solve the issue I made a new account and then copied all my files/folders over from my old account to the new one but because this problem has happened again, I predict that this will keep on happening again on every new account I make. I have also run malware scans which didn't detect any viruses.
eMachines PC, less than one year old, running XP Home (ugh)While in the "Owner" administrator account, I attempted to change the user rights for my daughter from "Restricted" to "Standard user". I used the "control userpasswords2" screen rather than the standard User Accounts control panel provided with XP Home.I immediately received an error message, stating something like "this account type cannot be found" or "this account type is not supported".No big deal that, but what occurred after that stymies me. My daughter's account is no longer visible in either of the account management control panels, and is also no longer visible in the Welcome Screen. All of her folders still exist.I attempted to re-add the account, but the system (perhaps wisely) prevents me from doing that, stating that the account still exists. Using the XP Home User Accounts control panel, I turned off the Welcome Screen; user login now uses the oldskool screen within which you have to enter the user account name in one field and the password in the other. My daughter is able to login that way.
View 6 Replies View RelatedI want to replace my standard mail notification with a wav file I've downloaded.
I went to; control panel/sounds and audio devices/sounds,and replaced it. It plays fine when I get mail, but the old notification plays after it.I removed the old notification before adding the new wav file and it still is happening.
I finally broke down and went from W2K Pro to XP Pro on my new build. Almost all my apps have installed just fine but two that I need will not. They are NetObjects Fusion 7 and Adobe Elements 2.0. Both are fairly new, around 2002 or 3 releases and both are rated for XP but once I launch the setup.exe the hourglass shows for about 5 seconds and then goes back to the standard cursor. I checked the Task Manager and in both cases setup.exe is loaded and running and I have to End Process to try the setup again but the same thing happens each time to both apps. They both installed fine and I've been using them for years on my W2K Pro machine.
View 14 Replies View Related