Imaging Devices Listed As Unknown In Device Manager?
May 13, 2005
All of a sudden, the imaging devices attached to a computer with Windows XP Pro SP2 are showing up under the Unknown category in the Device Manager. The
devices are listed correctly by their names under Unknown, but the software won't communicate with them.Windows can see the devices, but it does not know what type of devices they are. It is only the imaging devices. One is a Canon 4200F Canoscan scanner, the other is a Sony Camcorder, and the third is a hardware capture device (Pinnacle Moviebox). The Canon scanner is a USB 2.0 device, while the other two are attached through firewire ports.
Everest shows 3 unknown devices but device manager doesnt?my soundcard dissapeard today, i can still pick it up using "Unknown Devices" and EVEREST although when i try to run audigy 2 drivers, it`s telling me there are no supported devices in the system, anyone know how i can force the REAL device manager to see these devices?it seems only everest and unknown devices is picking up my soundcard, it also says AUDIGY from CREATIVE. it just is not appearing in device manager for some reason so i am unable to actually install it.
I had some trouble last night and today with getting rid of a virus. Now that it is gone, I am having sound problems (maybe related, maybe not). This morning, when I opened iTunes I got a message that there was no audio device detected. After trying several things, I rebooted. Magically, I could play music again. However, a short while later, I again got an error message telling me that there is no audio device found, even though it shows up in Device Manager as working properly. The problem goes away for a short time after I reboot, but returns. It is Realtek AC 97. Why won't my computer keep recognizing it? (It tried going to Realtek's site to download an update. It has updates for Windows 98, 95, etc., but not for XP. Or at least I couldn't find it.)
I have installed a targus 7 port powered USB HUB on my computer. Device manager reports unknown device. I have deleted and it restalled the drived after the system rebooted. Device manager still saying unknown device. Their is not driver needed according to the manufacture. When the PC is booting it does see the IPOD mini and the Flash drive. But once the PC is fully out and login and I look a the device manager is still reporting unlnown device error (code 10).
My primary hard drive crashed and my back up that holds all my pictures, mp3's and other important items is still ok. I reinstalled windows fine on a new hard drive with no problem. My back up hard drive is not showing in my explorer list though. Does anybody know how I may access it? I've installed all motherboard software and it still is not there. I don't wanna reformat that drive unless its the only thing i can do.
I have XP and when I open my device manager, no devices are shown at all. This is not corrected by the usual microsoft help (i.e set services plug/play to automatic).
I am not seeing the devices in my device manager window.....ever since I did the upgrade to svce pck 3, nothing is shown in the device manager window.....any sugesstions on how to correct this?
I changed the system boot in "MsConfig" and now my sound, scanner and my printer don't work. I looked at the device manager to see if there was an error with the soundcard or something, but all devices have vanished from the device manager. I just tried to connect my ipod to the computer, and it said the software can't communicate with the ipod.
I had to reinstall windows XP because my OS would not load and I got all the drivers reinstalled, diagnostic ran smooth and everything came up working ok etc but my device manager won't recognize anything! The compy says my audio mixers are not there, my USB devices are not working, hardware wizard is not responding, microsoft updates are not working, Dell's driver downloads are calling out for something that isn't there and I really need this fixed ASAP so I can get to my external HD.
I have lost my device manager when i click on device manager it opens a blank box with no devices in it help plz i also after finding this i decided to try and format xp home i get the message saying the windows vertion i have is newer than the vertion on disc.
Last night I installed ATiTool 0.24 over my 0.25 version (stupidly). I also did a BIOS update and installed Cat6.3 and then AVIVO converter. When I rebooted, I had this new PCI device requiring a driver,but it's an unknown device and doing an auto update helped me.I can't get rid of this pesky PCI device (tried uninstalling but Windows detects it again after restart/boot-up). All my stuff is working, so I don't know where this critter came from?
I have a huge problem with two unknown devices in my "Device Manager" after formating and reinstalling fresh copy of Win Xp Pro.In my "Device Manager" there is two lines with Unknown devices.
I have lost my sound. The sounds icon in control panel say " no audio devices" AND the sound tab shows all listed devices as working porperly. I have deleted an sound object that allows it in device manager and allowed XP to load wht it will. I still have no sound. I checked for sound services in services and they are started as well.If I load Knoppix and test, my sounds work so I am assumming it is not a hardware problem.
My device manager lists my USB Imaging Device as unknown and has no Drivers attached to it, is there any download link for a driver I could install on it?
I found something in my Add/Remove Programs called "My Way Search Assistant", which I removed - evidently successfully,as there is no trace of it in registry or programs. My problem is, however, the entry in Add/Remove remains but only with the name "My Way Search Assistant" and when I click on it all that shows is "Used Rarely"It has no size and no longer has any option to change or remove.I have looked for registry entries there are none is there a program listed.
Did a fresh install of xp sp2, sp3Sound device not detected or listed.Went to dell dounloaded all drivers and installed Service tag JC3XDH1 Tried uninstalling and reinstalling to no avail Still nothing, Help
Running Windows XP on Emachines ET1161-07. Installed all drivers that I could find, since EMachines does not represent XP. Tried Realtek audio and HD audio, tried Intel, didn't work. Tried NVidia, as it has an NVidia motherboard. Spent too much time on this computer. Can anyone lend a hand? I know it's got something to do with Audio, as there's no audio device detected in Sounds, under Control Panel.Customer has to have computer today.
I gotta a XP Home SP2 Machine was running fine then on boot up sound device not found. went to device mng and no items displayed. System restore had been didabled and Norton disabled as well. Done a spyware scan pull nout so did virus
Is there any device that I could download that could help me find my drivers for hardware in devices manager, I would also like to copy these drivers to a folder for future installations.
I had this problem last time when I fresh installed Windows XP Pro on my computer. I don't know the time, but it happens at least 30 days after I reinstall the OS and software. Today, my computer prompted me to install drivers for a PCI Input Device, but I haven't installed any new hardware for months. Basically, I haven't touched the inside of my computer for that long. So why is Device Manager prompting me to install this mystery device? Hardware ID shows that it is from vendor 1102, which is Creative, and I have an Audigy 1. Also, my FireWire port is Code 10, the device cannot start. So I'm thinking the mystery device is the same firewire port. But why show up as a separate device? I tried removing the devices and restarting the computer, but they return to haunt me again. The device properties for the PCI Input Device says PCI SLOT 7, AND I DONT HAVE A 7th slot! Can someone help me, please? Device manager shows my 1394 Net Adapter with a yellow exclamation, and it has code 10, device cannot start. There is an unknown device, the PCI Input Device, which doesn't allow me to install any drivers for it, yet it has the creative Vendor ID 1102. It shows itself as being PCI Slot 7.
I have a feeling that this is simply a case of some registry settings which need adding/modifying/deleting but exactly which ones and what values I do not know. No, I haven't tried re-installing XP.
remove this ddplay.exe from my task manager.This is coming only when IE6 browser runs. I open IE, go to Task Manager, delete this(ddplay.exe)I open another instance of IE, then this crap comes again. Its taking almost 25MB memory. My OS is Windows2000 and upto date (windows update)
A friend of mine has a 4 yr. old PC running XP Home with 128Mb of memory. He's had problems with programs aborting recently. I tried to run Device Manager to make sure there were no issues there. It briefly brought the screen up, then it went away. The same thing happened to Task Manager when I tried to see what was running and how much memory was being used. Anybody ever see this behavior before? I might try installing a memory cleaner pgm (ie. Memturbo), but I'm not sure I would even be able to get it to run. The hard drive amd memory seem to have no errors.
I'm using XP SP3 Home Gateway desktop My device Manager has nothing in it. I don't know when it quit showing. I have checked Bios plug&Play, and it is set in Auto. I am also getting an error stating my recovery D: is running out of disk space.
My computer cannot detect any cd's in my DVD or CD drive. When I open Device Manager the CD/DVD devices have an error. This error: Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41) Click Troubleshoot to start the troubleshooter for this device.When I run the DriverScan it simply doesn't even have an entry for the drives, probably since it thinks it doesn't even exist at the moment.
Anyone know how I can rename a device in device manager, (or the registry), so it doesn't show #2 after the device.I used the leadtek driver uninstall tool last night. And it removed the drivers I had for this Leadtek Deluxe tuner alright.BUT it also renamed my onboard Gigabit LAN (onboard) to #2 my scanner to #2, and removed my Nvidia drivers for the video card.And reverted the videocard drivers to MS Nvidia drivers.I managed to fix the scanner entry by uninstalling the drivers, then rebooting and reinstalling the drivers.And I managed to fix the videocard drivers, by reinstalling the Nvidia drivers.So, yup, anyone have any idea how I can change the board LAN, so it doesnt have #2 after it? sing XP Pro SP2
In device manager I have a Creative Audigy Audio Processor (WDM) which is showing as working ok and the device is enable.However under Sounds & Audio Device Properties this is missing from both the Sound Playback and Sound Recording - when the drop down tab is selected nothing is shown.Any ideas how I get this back so I can select as the Default Device,
I'm using Win XP SP2 . I installed a second CD rom drive which was obviously no good because it caused the other one which is perfectly ok to show up in the bios as an unknown device. Both showed up in the bios as unknown device but the the first still showed up in system hardware the second one didn't.I removed the second one from the computer and the first one then showed up accordingly in the bios as the proper device but the bios is still saying the second one is an unknown device. Every time I start my computer I get the message secondary device missing press the F1 key to continue.
Just put together my new system and all is working well, but I am left with this unknown exclamation in the "device manager". I can't figure out what it is. The only thing device manager says is,Location: on PCI standard ISA bridge The drivers for this device are not installed. (Code 28) and in the conflicting device list it says Memory Range FED00000 - FED00FFF not available.
i installed an usb device,and all the drivers for it,it worked for two days, it was recognized.Now it will not recognize the device.I have tried uninstalling and reinstalling the device drivers, all the software that used the device. and even tried to install the driver by locating with 'have disk' browse. i have tried all the directories that the drivers were installed to, and then some. and also the install disk. Device manager says that its an unknown device, and theres no problem with it. but will not update to the proper drivers. How can i alleviate this problem short of reformatting my computer.
