Installed All Drivers But Getting ATI X700 - Unknown Device?
Oct 22, 2009
I just installed Windows Xp on a puter. After installing all the drivers including the video card drivers from ATI's website the computer discovered an "unknown device on ATI Radeon X700"The motherboard is a gigabyte 8I865GME-775-RH and obviously a X700 Radeon Video Card. AGP drivers, chipset drivers and the like are all installed. The video card showed up as an unknown device when I first installed, I put in the catalyst drivers and it detected successfully, upon reboot this new unknown device came up and I can not seem to find any drivers for the thing. I tried reinstalling the catalyst drivers as well to no avail.
View 6 Replies
ADVERTISEMENT
Jun 29, 2005
I have a Gateway 710X running Windows XP Home Edition which has been patched up-to-date.Connected to this is a Western Digital 80Gb external hard drive Model Nr WD800B005-RNN) The drive had been connected to the USB port for a long time without any problems in access. Tonight, however, it seemed to have been discovered as disconnected, and we reconnected the USB cable.Upon reconnection, we get pop-up windows in the lower right corner which state: (1) Found New Hardware: USB Device then switches to (2) Found New Hardware: Unknown Device then appears (3) Found New Hardware: Your new hardware is installed and ready to use then appears (4) USB Device Not Recognized
View 8 Replies
View Related
Jun 29, 2005
I have a Gateway 710X running Windows XP Home Edition which has been patched up-to-date.Connected to this is a Western Digital 80Gb external hard drive Model Nr WD800B005-RNN) The drive had been connected to the USB port for a long time without any problems in access. Tonight, however, it seemed to have been discovered as disconnected, and we reconnected the USB cable.Upon reconnection, we get pop-up windows in the lower right corner which state: (1) Found New Hardware: USB Device then switches to (2) Found New Hardware: Unknown Device then appears (3) Found New Hardware: Your new hardware is installed and ready to use then appears (4) USB Device Not Recognized
View 1 Replies
View Related
Jun 22, 2005
my DVD ROM wont work. It has all the drivers installed and it is enabled from the computer management in the control pannel. I also enabled it using my backup software but it is still not recognised. Any sudgestions?? I used to have both Nero and Instant CD/DVD installed. I removed Nero just in case there was a conflict with the software but it still remains the same.
View 2 Replies
View Related
Jul 15, 2005
I have installed a targus 7 port powered USB HUB on my computer. Device manager reports unknown device. I have deleted and it restalled the drived after the system rebooted. Device manager still saying unknown device. Their is not driver needed according to the manufacture. When the PC is booting it does see the IPOD mini and the Flash drive. But once the PC is fully out and login and I look a the device manager is still reporting unlnown device error (code 10).
View 1 Replies
View Related
Mar 11, 2006
Last night I installed ATiTool 0.24 over my 0.25 version (stupidly). I also did a BIOS update and installed Cat6.3 and then AVIVO converter. When I rebooted, I had this new PCI device requiring a driver,but it's an unknown device and doing an auto update helped me.I can't get rid of this pesky PCI device (tried uninstalling but Windows detects it again after restart/boot-up). All my stuff is working, so I don't know where this critter came from?
View 1 Replies
View Related
Dec 24, 2007
I have a huge problem with two unknown devices in my "Device Manager" after formating and reinstalling fresh copy of Win Xp Pro.In my "Device Manager" there is two lines with Unknown devices.
View 10 Replies
View Related
Aug 17, 2009
video card on my laptop messed up somehow, i can see a exclamation mark on the device manager in the display drivers tab... now im searching to update my driver but cant find any sources that would suit xp windows now everything is very laggy cuz it shows im not using any video card or something like that anyway?
View 11 Replies
View Related
Oct 9, 2010
How do I uninstall all drivers associated with my (windows xp) touch pad. Touch Pad is not working / bad drivers installed drivers over bad drivers.
View 1 Replies
View Related
Nov 3, 2007
A friends HP Media Center PC m7077c crashed. Had no recover disk, etc. Installed XP Pro SP2 and I need drivers (according to Device Manager). No sound is obvious but video controller is not. Video seems okay. Where do I find drivers for this machine. XP Pro, Home and MCE are different OS's ... as far as my experience. The drivers are not the same.
View 3 Replies
View Related
Feb 6, 2007
I'm using Win XP SP2 . I installed a second CD rom drive which was obviously no good because it caused the other one which is perfectly ok to show up in the bios as an unknown device. Both showed up in the bios as unknown device but the the first still showed up in system hardware the second one didn't.I removed the second one from the computer and the first one then showed up accordingly in the bios as the proper device but the bios is still saying the second one is an unknown device. Every time I start my computer I get the message secondary device missing press the F1 key to continue.
View 4 Replies
View Related
May 23, 2007
Just put together my new system and all is working well, but I am left with this unknown exclamation in the "device manager". I can't figure out what it is.
The only thing device manager says is,Location: on PCI standard ISA bridge The drivers for this device are not installed. (Code 28) and in the conflicting device list it says Memory Range FED00000 - FED00FFF not available.
View 3 Replies
View Related
Aug 5, 2005
i installed an usb device,and all the drivers for it,it worked for two days, it was recognized.Now it will not recognize the device.I have tried uninstalling and reinstalling the device drivers, all the software that used the device. and even tried to install the driver by locating with 'have disk' browse. i have tried all the directories that the drivers were installed to, and then some. and also the install disk. Device manager says that its an unknown device, and theres no problem with it. but will not update to the proper drivers. How can i alleviate this problem short of reformatting my computer.
View 2 Replies
View Related
Sep 10, 2010
I'm gonna reformat my winxp in my 160GB hard drive and it's my first time to do it. Should I install these drivers?My mobo is MSI G31M3 and i downloaded these drivers from MSI website.I know I need these drivers Realtek High Definition Audio Driver Realtek PCI-E Ethernet Drivers Not sure about these.Intel INF Drivers for 3/4/5 Chipsets Intel Matrix Storage Manager Driver Intel 945G Series VGA Drivers Intel ICH7R/ICH8R SATA RAID Driver (For floppy driver) (I dont have a floppy drive so I probably don't need this) Intel IAA RAID Edition for ICH7R
View 4 Replies
View Related
Aug 23, 2009
I installed all the Windows updates and loaded the drivers off the utility disk that came with the motherboard. I also got the updates from the GIGABYTE website. The utility app shows all drivers are installed correctly. It took me a couple of days to get audio to work because the initial driver load got corrupted somehow and it wouldn't let me reinstall until I deleted the driver's entry in the registry. After that I was prompted for the driver again and it installed fine and sound finally started working. Everything appears to be working and there is only the one Unknown driver in my Device Properties and it's really irking me. All my drivers were installed correctly in my previous installation
View 2 Replies
View Related
Sep 9, 2009
I don't have sound and haven't for the past few days and then this morning a Found New Hardware Wizard keeps popping up trying to install software for an Unknown Device on High Definition Audio Bus.In the Device Manager, there are yellow question marks near Other Devices and then below it, in sub categories is a list of at least 20 (!) Unknown Device on High Definition Audio Bus.In the Audio Device section, there are NO Playback Devices, NO Recording Devices, No Midi Playback and the same in the Voice section. Usually I have Realtek listed there.
View 2 Replies
View Related
Jul 5, 2009
Help with Unknown Device (media reader)wont find anything related to this
View 9 Replies
View Related
May 13, 2005
All of a sudden, the imaging devices attached to a computer with Windows XP Pro SP2 are showing up under the Unknown category in the Device Manager. The
devices are listed correctly by their names under Unknown, but the software won't communicate with them.Windows can see the devices, but it does not know what type of devices they are. It is only the imaging devices. One is a Canon 4200F Canoscan scanner, the other is a Sony Camcorder, and the third is a hardware capture device (Pinnacle Moviebox). The Canon scanner is a USB 2.0 device, while the other two are attached through firewire ports.
View 5 Replies
View Related
Aug 27, 2005
This has happened several times and I don't know how to correct it, if anyone has a suggestion please let me know. When I uninstall. unplug and remove drivers, for a USB device (web cam) and then reinstall it later Windows says it #2 or #3 or #4 but there is no other device. Why does it name it that way and how can I make it install as just that device.This has also happened when I installed a replacement NIC card.I hope someone understands what I am trying to explain.
View 1 Replies
View Related
Jun 23, 2002
I installed a fresh copy of WIN2000 on my IBM Thinkpad A21m but I am having a problem setting up a device in Device Mangager. I have no idea what is going on.
When i reboot the laptop it prompts me that it has found a new piece of hardware and it wants me to install the driver for it. The problem is that I have no idea what device it is since all the devices that should be working are working - so i don't know what to do.
The clues that I have noticed that might help:
- the laptop takes a LOOOONG time to boot up (3 or 4 mins), and is sort of sluggish in operation (compared to how it ran when i bought it)
- my internet connection is super slow ( I have a DSL router that serves 3 computers incl. mine, the other two have XP and everythign runs smooth)
- the unknown device says it is located on the the "Microsoft ACPI-Compliant Embedded Controller"
Would any one know what Device this "Unknown Device" is??? I just need to know so i can install the driver so my system can run properly.
View 10 Replies
View Related
May 24, 2010
I have a bit of a problem, for some reason my system is showing "unknown" in my device manager, the only hardware that has been installed on this system is a new video card, (radeon HD5570) that seemed to go in without a hitch. Simultaneously, with this appearing I started having issues with windows media player not play .mod files, using web help it says that I need to update my audio drivers, but according to Dell they are good. Would really like some help with this.
View 14 Replies
View Related
Dec 28, 2007
Everest shows 3 unknown devices but device manager doesnt?my soundcard dissapeard today, i can still pick it up using "Unknown Devices" and EVEREST although when i try to run audigy 2 drivers, it`s telling me there are no supported devices in the system, anyone know how i can force the REAL device manager to see these devices?it seems only everest and unknown devices is picking up my soundcard, it also says AUDIGY from CREATIVE. it just is not appearing in device manager for some reason so i am unable to actually install it.
View 8 Replies
View Related
Jul 6, 2004
I created a mess (but I'm learning more each day), and after a week got it going at least, but on boot got messagae "primary hard disc drive 1 not found" which required clicking F1 to continue. I ended up reinstalling XP, got everything up and running, but still have the HD message at each boot. I've passed all of the diagnostics in Set-Up, and found nothing on any of the troubleshooting sites that helped. Set-up says: Primary Drive 0 - Hard Drive; Primary Drive 1 - Unknown Device; Secondary Drives 0 adn 1 are both CD-ROM Readers. Everything works just fine, but I'd like to figure the drive problem. I had to create a partition for the reinstall - had no choice.
View 3 Replies
View Related
Jan 26, 2007
what i'm trying to do is install a SAMSUNG SGH-D600 mobile phone under WinXP via USB cable (original Samsung cable from the box). For this post the results are for the new drivers from the "Samsung PC Studio 311 FKB" package.But, i've been getting the same thing with the earlier versions of Samsung SGH-D600 Drivers, as well as Mobile Action drivers for D600.
View 15 Replies
View Related
Aug 20, 2005
Under Device Manager it shows Other Drivers and under that SM Bus Controller. All of this has a yellow question mark. I am not sure what this means and need to correct. Thanks in advance. OS is Win XPSP2.
View 1 Replies
View Related
Jun 15, 2005
I'm having problems with 2 of my computers recognizing USB mass storage devices. They used to work just fine but not any more. When I plug them in (I've tried my Palm - have program to recognize it as a drive - and a new card reader and my camera) I get a message that new hardware is found (mass storage device) but then it takes me to the Found New Hardware Wizard and none of the choices I select (Install Automatically, search web, etc) find any drivers. The crazy thing is, though, that when it did work, the first time I plugged them in the Found New Hardware Wizard didn't come up but it installed what it needed automatically. I'm thinking there is a corrupt driver and was wondering if there was a way to get just that driver back without reinstalling Windows. Also, what's strange is that two of my computers work this way. My one (other) computer accepts everything just fine.
View 13 Replies
View Related
Jul 8, 2005
I switched ISPs and the rep came to my home to help. He could not get a connection, so he installed some different lan cards until one worked. Since then, I installed a Wireless. Now, I have several drivers under networks in device manager that will not uninstall. Why? and how can I uninstall them like other devices there?
View 1 Replies
View Related
Mar 23, 2010
Missing Virtual drivers in device manager, virtual PC Inegration device. Need these drivers
View 1 Replies
View Related
Nov 19, 2007
Hey guys, I've had an empty Device Manager for a long time and I'm only now trying to find out how to fix it.I didn't really worry about it before because everything was working fine, even though it was empty. But recently when I've been trying to install drivers for my video card, and my new game controller there have been issues. For example the driver installation for my radeon 9600 card refuses to start up. And the driver installer for my gamepad fails to recognize that it's even plugged in (even though games recognize the controller just fine).I'm guessing these driver problems are related to the empty device manager? The installer won't install the drivers because it doesn't think the devices are even installed or plugged in the computer.
View 9 Replies
View Related
Nov 21, 2009
Recently I have not been able to access my flash drive from the USB ports. Whn I check the device manager I can see the drive but it is listed as unknown device. What would be a good fix? I am using XP.
View 6 Replies
View Related
Nov 17, 2009
I have a rather old machine which is unbadged, Mainboard Model 865-Series, Intel Pentium 4, Speed 2800 MHz with 512 MB Ram and Running Windows XP.On power-up it says that neither th Video Controller (VGA Compatible), Multimedia Audio Controller or Ethernet Controlller have been installed. When useing the Add Hardware Wizard the following message is returned :- "The drivers for this device are not installed. (Code 28)" and "The hardware was not installed because the wizard cannot find the necessary software".
View 13 Replies
View Related
