DVD ROM Not Working: Installed Device Drivers Shown In Control Panel ?
Jun 22, 2005
my DVD ROM wont work. It has all the drivers installed and it is enabled from the computer management in the control pannel. I also enabled it using my backup software but it is still not recognised. Any sudgestions?? I used to have both Nero and Instant CD/DVD installed. I removed Nero just in case there was a conflict with the software but it still remains the same.
im missing my bluetooth device manager on my control panel. it got uninstalled . i have tried to repair my services pack 2 and installing it again bit wont let me.i run windows XP any other ideas i can try?
I'm running XP Professional though whether it is a 32 bit or 64 bit, I have no idea.If it is relevant, and someone can tell me how, I'll check and post it up My initial problem was that I recently discovered my PC no longer has any sound. I haven't got speakers attached, I just use the internal one.It still bleeps occasionally but I found that I couldn't play any music or computer sounds.I investigated a bit further by going to the Sound and Audio Devices icon in the control panel where I discovered that there is 'No Audio Device' and no list of devices in the Hardware tab.
I have a Gateway 710X running Windows XP Home Edition which has been patched up-to-date.Connected to this is a Western Digital 80Gb external hard drive Model Nr WD800B005-RNN) The drive had been connected to the USB port for a long time without any problems in access. Tonight, however, it seemed to have been discovered as disconnected, and we reconnected the USB cable.Upon reconnection, we get pop-up windows in the lower right corner which state: (1) Found New Hardware: USB Device then switches to (2) Found New Hardware: Unknown Device then appears (3) Found New Hardware: Your new hardware is installed and ready to use then appears (4) USB Device Not Recognized
I have a Gateway 710X running Windows XP Home Edition which has been patched up-to-date.Connected to this is a Western Digital 80Gb external hard drive Model Nr WD800B005-RNN) The drive had been connected to the USB port for a long time without any problems in access. Tonight, however, it seemed to have been discovered as disconnected, and we reconnected the USB cable.Upon reconnection, we get pop-up windows in the lower right corner which state: (1) Found New Hardware: USB Device then switches to (2) Found New Hardware: Unknown Device then appears (3) Found New Hardware: Your new hardware is installed and ready to use then appears (4) USB Device Not Recognized
How do I remove Quick Time Media Player from my PC, which was downloaded some time back. In control panel their is separate entry for quick time which cannot be deleted. tried to remove it by deleting all the entry pertaining to quick time from registry, but it simply refuses to go.
I have a work computer running Windows XP Pro and I noticed that there is no mail client icon in the control panel. I do not have Microsoft Outlook installed on this computer, is that the reason or is something else wrong?
I use Windows XP Media Edition and yesterday the Add/Remove Programs function on my control panel quit working. The message comes up please wait while the list is being populated and then nothing else happens. The longest I waited was 45 minutes while I went off and did something else. The list never appeared. All of the other functions in the control panel seem to be working.Everything seems to have slowed down on my computer. It is a Pentium(R) CPU 3.60 GHz 2 GB of RAM Service Pack 2 Version 2002 I bought it at Frys Electronics. Does anyone have any suggestions for the Add/Remove Programs glitch? Am I about to lose a hard drive?
I just installed Windows Xp on a puter. After installing all the drivers including the video card drivers from ATI's website the computer discovered an "unknown device on ATI Radeon X700"The motherboard is a gigabyte 8I865GME-775-RH and obviously a X700 Radeon Video Card. AGP drivers, chipset drivers and the like are all installed. The video card showed up as an unknown device when I first installed, I put in the catalyst drivers and it detected successfully, upon reboot this new unknown device came up and I can not seem to find any drivers for the thing. I tried reinstalling the catalyst drivers as well to no avail.
I have transffered my Hard Disk from MSI mother board to INTEL mother board.
All drivers are installed from INTEL mother board CD. But mouse is not working, only its pointer is visile in the middle of screen (pointer can be moved by using keyboard's Num pad
video card on my laptop messed up somehow, i can see a exclamation mark on the device manager in the display drivers tab... now im searching to update my driver but cant find any sources that would suit xp windows now everything is very laggy cuz it shows im not using any video card or something like that anyway?
I want a single desktop click to enable/disable windows XP taskbar auto hide.I can do this if I write a script for the AutoHotkey macro tool to open the relevant dialog box and then check or uncheck the appropriate check box.I'd like to open the dialog box with a command line from AutoHotkey, or a similar operation. Right-clicking the taskbar even in the program is uncool.The catch is, I can execute any CP dialog EXCEPT this one as a command line, either passing a dialog parameter to Control.exe or else using a *.cpl file name with Control.exe or directly. But I can't find "Taskbar and Start Menu".
A friends HP Media Center PC m7077c crashed. Had no recover disk, etc. Installed XP Pro SP2 and I need drivers (according to Device Manager). No sound is obvious but video controller is not. Video seems okay. Where do I find drivers for this machine. XP Pro, Home and MCE are different OS's ... as far as my experience. The drivers are not the same.
I have XP and when I open my device manager, no devices are shown at all. This is not corrected by the usual microsoft help (i.e set services plug/play to automatic).
I gotta a XP Home SP2 Machine was running fine then on boot up sound device not found. went to device mng and no items displayed. System restore had been didabled and Norton disabled as well. Done a spyware scan pull nout so did virus
I have lost my control panel function. When I click on "control panel" I get the message "This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.My PC is not networked with any other equipment.
I can not get a photo or anything other than a "color" to be my desktop wallpaper. When I am in the control panel - display - the only buttons that are active are the "browse" and "color" buttons. The "position" button does not work. I can't even get one of the Windows backgrounds to display. The photo I choose to use is there somewhere because it is visible briefly when I start mycomputer. Then it disappears and is replaced by a "color" only screen.This is a very recent problem. I'm guessing some settings are incorrect.
I accidently posted this in "Vista" so I'm reposting it here as the operating system I have is XP Professional. I'm having a problem with "Display" in the Control Panel. Yesterday I visited a website and opened a file. After I did that, my wallpaper changed and it appeared to be whatever the website was. I was able to somehow get it off (don't ask me what I did, I couldn't tell you). Now, when I click on "Display" in the Control Panel and go to "Desk Top", the only thing that I can change is the color and I can also click on "Customize Desktop", but I cannot change the background or click on browse...".
When I try to open "Control Panel" it gives me an error dialog box that says Windows Explorer has encountered a problem and needs to close. We are sorry for the inconvenience. "Control Panel" has been taking longer and longer to load, but now it just stops. Running Windows XP Service Pack 2.
We recently downloaded a number of critical updates from MS. I didn't notice that ie7 was included in the list and installed it. We all dislike ie7 and would like to return to ie6, Can I just install/uninstall ie7 through control panel and ie6 will come back? Or will this leave me with no ie at all.
My control panel has disappeared and I can't fix it even though I've run AVG anti-virus and Spybot Search & Destroy. I'm also getting the following pop-up (with misspellings).Warning! Potential Spyware Operation!Your computer is making unauthorized copies of your system and Internet files. Run full scan now to prevent any unathorised access to your files! Click YES to download spyware remover.
I have spent 14 hours trying to get this mess off my computer and get my life back.This warning screen popped up as you know after I got blasted by a porn page and had shut my computer completely off and rebooted.I did not download the spyware offered but something still got in.Lost the control panel and had restricted access to certain things.After many hours went into control panel through another user and was able to do a few things.I found a site that had a control panel fix and did get that restored on main user but everything is slow and not running right.I have also run Xoftspy, prevx, spybot,and spyhunter.I have run Norton none of which has solved the problem.
I un-installed a program (The Weather Channel) from the add & remove Programs and all other locations, including Icons have been deleted, excepting the Icon in the Control Panel. When I right click to open, an error #126 comes up stating (could not get local SMS.INI for current machine).Is it possible to delete thiss icon ? My OS is XP
how to install IIS with an executable instead of going to control panel, add remove programs, windows compents. I want to add it to a batch file that I run to install applications. I would just add it to the XP Install build script but I dont want it on every machine.
I run Windows xp sp2, I often use hibernation option, recently I am unable to do this. When I go into power options in the control panel the hibernation tab is missing, also in the turn off computer options in the start menu the standby tab is greyed out
Recently, my XP Pro SP3 Control panel started opening upon Windows startup. I've found no one on the Net who has this problem, and have no idea how to stop this behavior.
When I attempt to make any selection in my Control Panel such as Add/Remove programs etc, a DOS screen pops up along with a dialogue box that reads like this: 16 Bit MS-DOS Subsystem C:WindowsSystem32 undll32.exe The NTVDM CPU has encountered an illegal instruction. CS: 0000 IP: 0077 OP:fo 37 05 0c 02 Choose 'close' to terminate the application Trying to reinstall WindowsXP from the original CD fails and just gives me an error message telling me it can't install because I have a newer version of Windows. Can someone help me with the best course of action to take? I need my computer for a job search and it is getting more unstable all the time. Also, I get two of these same DOS screens with the same error message at startup. I would really appreciate some help. Now, here is what someone at another forum told me to do that didn't work, unfortunately:
I have not been able to get into my control panel for quite some time now. Every time I try to get in, I get the "Windows has encountered an error and must close the program error" I really need to get into my control panel to remove some programs.thought? I am running windows xp