Recently I have not been able to access my flash drive from the USB ports. Whn I check the device manager I can see the drive but it is listed as unknown device. What would be a good fix? I am using XP.
View 6 RepliesI have a bit of a problem, for some reason my system is showing "unknown" in my device manager, the only hardware that has been installed on this system is a new video card, (radeon HD5570) that seemed to go in without a hitch. Simultaneously, with this appearing I started having issues with windows media player not play .mod files, using web help it says that I need to update my audio drivers, but according to Dell they are good. Would really like some help with this.
View 14 Replies View RelatedI created a mess (but I'm learning more each day), and after a week got it going at least, but on boot got messagae "primary hard disc drive 1 not found" which required clicking F1 to continue. I ended up reinstalling XP, got everything up and running, but still have the HD message at each boot. I've passed all of the diagnostics in Set-Up, and found nothing on any of the troubleshooting sites that helped. Set-up says: Primary Drive 0 - Hard Drive; Primary Drive 1 - Unknown Device; Secondary Drives 0 adn 1 are both CD-ROM Readers. Everything works just fine, but I'd like to figure the drive problem. I had to create a partition for the reinstall - had no choice.
View 3 Replies View RelatedI have installed a targus 7 port powered USB HUB on my computer. Device manager reports unknown device. I have deleted and it restalled the drived after the system rebooted. Device manager still saying unknown device. Their is not driver needed according to the manufacture. When the PC is booting it does see the IPOD mini and the Flash drive. But once the PC is fully out and login and I look a the device manager is still reporting unlnown device error (code 10).
View 1 Replies View RelatedLast night I installed ATiTool 0.24 over my 0.25 version (stupidly). I also did a BIOS update and installed Cat6.3 and then AVIVO converter. When I rebooted, I had this new PCI device requiring a driver,but it's an unknown device and doing an auto update helped me.I can't get rid of this pesky PCI device (tried uninstalling but Windows detects it again after restart/boot-up). All my stuff is working, so I don't know where this critter came from?
View 1 Replies View RelatedI have a huge problem with two unknown devices in my "Device Manager" after formating and reinstalling fresh copy of Win Xp Pro.In my "Device Manager" there is two lines with Unknown devices.
View 10 Replies View RelatedThis in plain non-techie English? My Microsoft Camera and scanner Wizard no longer comes up when I insert the FLASH-CARD from my HP digital camera in the FLASH-DRIVE on my PC. Nothing happens now, It worked great for 2 years.How do I get the wizard back so I can unload my camera using the flash-card in the flashdrive?I have WXP-Home/SP2. I downloaded some XP security updates but don't know if they caused the problem.
View 18 Replies View RelatedThis is the first time i've done this. I'm using windows xp. I have a flash drive that i use for backing up files. All of a sudden I can't access it. When i plug it back into the USB port that I used it originally, the computer reconizes that it is plugged in (by showing that i have a new drive) but asks me to insert a disk. I've tried it in my other USB2 ports with no luck. I notice that the LCD (?) flashes when I plug it in. I've tried other flash drives in the same ports and they work fine. I'm wondering if I some how changed the format from FAT to NTFS or the other way around.
View 4 Replies View RelatedI have a USB 512-meg flash drive; brand new, outta the box. I used it on my computer at home with no problem--I plug it in, the computer recognizes it and it shows as another drive. However, my computer at work recognizes it and says "your device is ready to use" but it doesn't show up as a drive so I can't get into it. I've done the whole "troubleshoot" bit to no avail.Is there a way I can go to it manually or...? How can I see it so I can double click on it and get to the contents?
View 7 Replies View RelatedI'm using Win XP SP2 . I installed a second CD rom drive which was obviously no good because it caused the other one which is perfectly ok to show up in the bios as an unknown device. Both showed up in the bios as unknown device but the the first still showed up in system hardware the second one didn't.I removed the second one from the computer and the first one then showed up accordingly in the bios as the proper device but the bios is still saying the second one is an unknown device. Every time I start my computer I get the message secondary device missing press the F1 key to continue.
View 4 Replies View RelatedJust put together my new system and all is working well, but I am left with this unknown exclamation in the "device manager". I can't figure out what it is.
The only thing device manager says is,Location: on PCI standard ISA bridge The drivers for this device are not installed. (Code 28) and in the conflicting device list it says Memory Range FED00000 - FED00FFF not available.
i installed an usb device,and all the drivers for it,it worked for two days, it was recognized.Now it will not recognize the device.I have tried uninstalling and reinstalling the device drivers, all the software that used the device. and even tried to install the driver by locating with 'have disk' browse. i have tried all the directories that the drivers were installed to, and then some. and also the install disk. Device manager says that its an unknown device, and theres no problem with it. but will not update to the proper drivers. How can i alleviate this problem short of reformatting my computer.
View 2 Replies View RelatedI have a Gateway 710X running Windows XP Home Edition which has been patched up-to-date.Connected to this is a Western Digital 80Gb external hard drive Model Nr WD800B005-RNN) The drive had been connected to the USB port for a long time without any problems in access. Tonight, however, it seemed to have been discovered as disconnected, and we reconnected the USB cable.Upon reconnection, we get pop-up windows in the lower right corner which state: (1) Found New Hardware: USB Device then switches to (2) Found New Hardware: Unknown Device then appears (3) Found New Hardware: Your new hardware is installed and ready to use then appears (4) USB Device Not Recognized
View 8 Replies View RelatedI have a Gateway 710X running Windows XP Home Edition which has been patched up-to-date.Connected to this is a Western Digital 80Gb external hard drive Model Nr WD800B005-RNN) The drive had been connected to the USB port for a long time without any problems in access. Tonight, however, it seemed to have been discovered as disconnected, and we reconnected the USB cable.Upon reconnection, we get pop-up windows in the lower right corner which state: (1) Found New Hardware: USB Device then switches to (2) Found New Hardware: Unknown Device then appears (3) Found New Hardware: Your new hardware is installed and ready to use then appears (4) USB Device Not Recognized
View 1 Replies View RelatedI installed all the Windows updates and loaded the drivers off the utility disk that came with the motherboard. I also got the updates from the GIGABYTE website. The utility app shows all drivers are installed correctly. It took me a couple of days to get audio to work because the initial driver load got corrupted somehow and it wouldn't let me reinstall until I deleted the driver's entry in the registry. After that I was prompted for the driver again and it installed fine and sound finally started working. Everything appears to be working and there is only the one Unknown driver in my Device Properties and it's really irking me. All my drivers were installed correctly in my previous installation
View 2 Replies View RelatedI just installed Windows Xp on a puter. After installing all the drivers including the video card drivers from ATI's website the computer discovered an "unknown device on ATI Radeon X700"The motherboard is a gigabyte 8I865GME-775-RH and obviously a X700 Radeon Video Card. AGP drivers, chipset drivers and the like are all installed. The video card showed up as an unknown device when I first installed, I put in the catalyst drivers and it detected successfully, upon reboot this new unknown device came up and I can not seem to find any drivers for the thing. I tried reinstalling the catalyst drivers as well to no avail.
View 6 Replies View RelatedI don't have sound and haven't for the past few days and then this morning a Found New Hardware Wizard keeps popping up trying to install software for an Unknown Device on High Definition Audio Bus.In the Device Manager, there are yellow question marks near Other Devices and then below it, in sub categories is a list of at least 20 (!) Unknown Device on High Definition Audio Bus.In the Audio Device section, there are NO Playback Devices, NO Recording Devices, No Midi Playback and the same in the Voice section. Usually I have Realtek listed there.
View 2 Replies View RelatedHelp with Unknown Device (media reader)wont find anything related to this
View 9 Replies View RelatedAll of a sudden, the imaging devices attached to a computer with Windows XP Pro SP2 are showing up under the Unknown category in the Device Manager. The
devices are listed correctly by their names under Unknown, but the software won't communicate with them.Windows can see the devices, but it does not know what type of devices they are. It is only the imaging devices. One is a Canon 4200F Canoscan scanner, the other is a Sony Camcorder, and the third is a hardware capture device (Pinnacle Moviebox). The Canon scanner is a USB 2.0 device, while the other two are attached through firewire ports.
I installed a fresh copy of WIN2000 on my IBM Thinkpad A21m but I am having a problem setting up a device in Device Mangager. I have no idea what is going on.
When i reboot the laptop it prompts me that it has found a new piece of hardware and it wants me to install the driver for it. The problem is that I have no idea what device it is since all the devices that should be working are working - so i don't know what to do.
The clues that I have noticed that might help:
- the laptop takes a LOOOONG time to boot up (3 or 4 mins), and is sort of sluggish in operation (compared to how it ran when i bought it)
- my internet connection is super slow ( I have a DSL router that serves 3 computers incl. mine, the other two have XP and everythign runs smooth)
- the unknown device says it is located on the the "Microsoft ACPI-Compliant Embedded Controller"
Would any one know what Device this "Unknown Device" is??? I just need to know so i can install the driver so my system can run properly.
Everest shows 3 unknown devices but device manager doesnt?my soundcard dissapeard today, i can still pick it up using "Unknown Devices" and EVEREST although when i try to run audigy 2 drivers, it`s telling me there are no supported devices in the system, anyone know how i can force the REAL device manager to see these devices?it seems only everest and unknown devices is picking up my soundcard, it also says AUDIGY from CREATIVE. it just is not appearing in device manager for some reason so i am unable to actually install it.
View 8 Replies View RelatedReformatting a pc of mine to give to my sister. Her old computer had some info on its hard drive that she needed. It was too big to fit on a floppy and the CDROM had died so I took her old drive and hooked it up in the newer pc. The problem is: it shows up in System Devices but not in Windows Explorer. I tried right clicking on My Computer and then Manage to assign a drive letter to it, but it wont allow me. The option for assigning a drive letter isnt even available for that hard drive.
View 11 Replies View RelatedI have a Sabrent SBT-EKU25 external enclosure with a 2.5 inch hard disk in it. This is a USB 2.0 drive and whenever I connect it to USB 2.0 port, it is not recognized (or "recognized" as an unknown device" ) on all my machines. It however is recognized as a drive and works fine on one laptop which has only USB 1.1 ports.I have tried separately powered USB hubs as well without success. So I don't think it's a power issue.I have even tried deleting all USB devices in Device Manager and let the machine rediscover them.
View 2 Replies View RelatedMy external drive has always been "E" and I have several desktop shortcuts that relate. Recently I inserted a flash drive containing home movies and after viewing and a reboot later I noticed that my external drive is now shown as "New Volume F". I would like to change it back to "E"
View 5 Replies View RelatedI had a problem with my windows. When ever I plug in my Flash drive (i got a few: kingston data traveller 1gig, pendrive 128mb,etc) onto my usb port. Window will be able to detect the drive had been plug in. I can see the "Safely Remove Hardware" icon on the right side of my task bar. But i cannot see the drive appearing in "My Computer". If I double click on the "Safely Remove Hardware" icon and try to view the external drive information, I can see that its already detected and being assign with drive E: . Even if I open a windows explorer and type in E: , it will throw me an error "Cannot find 'file:///E:/'. Make sure the path or Internet address is correct". But if I were to restart my computer, then i can see it for the first time. If I disconnect it (thru the "Safely Remove Hardware") and plug it back in (or plug another flash drive), I cant see the external drive. Causing I had to restart my computer multiple time a day.
View 3 Replies View RelatedOn our WinXP systems (SP1 & 2), when users attempt to us usb flash drives, sometimes the O/S tries to assign an already used network drive letter to the device, making it unaccessible. Of course, the non-admin users can't use drive manager to change the drive letter. Is their a way around this problem?
View 2 Replies View Relatedcan you ghost a hard drive on a flash drive?
View 2 Replies View RelatedWin XP Pro, USB 1.1 in front, 2.0 card added to PCI slot.I can put in a jump drive or a flash memory card reader and hear the XP bong, it does the new software found and says it's available, but It does not show on 'my computer'.I can go to manage, disk drives, and see it. I can right click and assign a drive letter, but still does not appear on 'my computer'.I can still open it after assigning a drive letter in 'manage' and read/write files from a new window.I'm suspecting BIOS? It was a machine I upgraded to XP Pro.
View 14 Replies View RelatedI'm using a sandisk cruzer to try to install windows on my new rig. I've got a legit windows key, and serial number. Just lost the CD a long time ago, and don't have a sata Drive. Now, there is windows XP on my current sata harddrive but it is incompatable with the system (it was installed on another system.) So sense I don't got any DVD/CD burners, or any way of buying one for a month. I looked into making my USB flash drive bootable. I've used the HP USB Disk Formating tool to format it with FAT32, and dos Windows 98 files (Command,IO.sys,MSDOS.sys) thinking this would make it bootable. Tossed A version of windows XP I downloaded SP3, onto the drive, appatempted to boot it, but when I boot the flash drive with my gigabyte X38 DS4, it just loads windows 98 for half a second and brings me to a DOS C:. which was similer when I tried to install windows 7 from my USB drive where as that brought me 2 windows ME dos screen. It seems not to autorun so I don't really know how to partition my disk, format, and install a fresh coppy of windows.
View 6 Replies View RelatedSomeone has a Dell GX620 box and when they put a thumb drive into the box it does not show up. You hear a little ding as if it is being recognized but nothing happens. I do not see any yellow marks in the device manager. When I took the same thumb drive and put it into another box it shows up.
View 4 Replies View Relatedi did a repair of xp pro and now i cant get to my flash drive.it shows in my computer but when i click an error message says cant access h:or please insert disk.
View 7 Replies View Related