Since there are 8 bits to a byte there can be a major misunderstanding with abbreviations. Are there standard abbreviations for bits and bytes? I always assumed bits was small b and bytes was capital B. Is this true? 100 MB - mega bytes. 100 mb - mega bits.Is a 56k modem 56k bytes or bits per second?Can I assume everything is bytes unless bits is specifically stated?
View 1 Replies
Any URL or advice about pros&cons of using 64 bits OS, from a practical perspective?
- Would I notice a performance boost?
- Which kind of incompatibilities will I find?
The computer will be used for general purpose (at home) as well as more advanced tasks (virtual machines, etc).
It started when I decided I wanted to put a total of 4GB of RAM in my computer. The problem is that I have Windows XP x86 (32-bits) installed.
Then, a few friends of mine adviced me to get rid of this old Windows XP (32-bits), get the total of 4GB of RAM and install Windows 7 x64.
My CPU's architecture supports x64 systems, as I have 4 cores. My main problem, is that I would have to reinstall all my programs, applications and drivers (because I have the 32-bits-versions installed) and that if I stay with my 32-bits-XP system, it would only read 3 to 3.5GB of RAM aprox.
I've been playingwith various flavors of Linux and using the QTPArted cd to resize partitions. Until recently, there have been no problems doing this. but within the last few days, I suddenly have an E: and F: that are of the type RAW and are 0-bytes in size. These two don't show in the Windows Disk Defragmenter or in the QTParted partitioner.
I presently have only Windows and no Linux installations. but they are taking up space as far as the allocation for the drive letters is concerned. Here are the drives that show normally:C: - my Windows partition D: - my CD drive In Windows Explorer, the two above show up..but I also have these E: and F:drives. I've looked through the Registry and don't see anything there
I run Wndows XP home and have been trying to delete the folder Winamp/Plugins/Milkdrop
Looking under 'properties' it says there are 0 bytes, 0 files, 0 folders. But when I hit delete on the Milk Drop folder I get a message saying the "Directory is not empty". I've uninstalled, reinstalled and uninstalled Winamp to no effect. The main problem is that it prevents Norton Systemworks running properly. It gets stuck when doing the system (registry) checks and when running Windoctor Wizard it stops as soon as it reaches the MilkDrop folder.
i have a laptop with windows XP SP2 installed on it. It has onboard 100mbps lan card. I worked fine till yesterday, but now when i try connecting to my network, it is showing as connected but there are no received packets. It .suddenly happened and i am able to access LAN using ubuntu. I have tried reinstalling XP but of no use..
View 6 Replies View RelatedWhen I try to download files, e.g drivers, pdf's from certain sites using my work PC , which is running XP Pro service pack 2, I often get a message saying 'done' but when I go to the location where I saved the file , the resultant file does not work , and hovering the mouse pointer over it, displays 0 bytes!On getting home from work I try to download the same file on my PC at home which is XP Pro but (assiduously ) non -service pack 2 and it/they download straight away and work.
I don't know much about computers but I seem to be having a lot of disc activity since changing my hard drive and reinstalling windows xp. I've been to windows task manager & have enabled I/O Read Bytes & I/O Write bytes. When I'm doing nothing the following 3 programs are constantly changing. I've been online for about 3 hours now & these are the approximate figures:
ashserve.exe (Avast antivirus): read: 4,700,000,000 write: 3,700,000
svhost.exe: read: 705,000,000 write: 718,000,000
lsass.exe: read: 1,010,000 write: 540,000
Today is the 1st time my firewall reporeted that lsass requested internet access though this disc activity has been noticable since doing the reinstall.
I've recently ran into an opportunity to install 64-bit windows XP. I can't really get Vista at the moment, so I'm considering this. Google has been vague on it, and most of the articles that I've read say that it's a bad idea. Granted they were published in 2005.
View 4 Replies View RelatedJust wondering. When I set BITS, Background Intelligent Transfer Service to automatic & started using services.msc, after a while, maybe days later, it goes back to manual & stopped. When I look at http://www.theeldergeek.com/background_intelligent_transfer_service.htm it seems to suggest that I could set it either way. Since I never seem to get windows update automatically, although I do get them manually, I just wanted to try this setting to see if it would work for me. . Running win xp pro, sp2, dell dimension 2350, 1 GB mem, 2.0 GHz, cable modem. Usually run daily auto scans with MSAB & AVG7. Also have AdawareSE, Spybot, Spyware Blaster.
View 3 Replies View RelatedIs there any way do transform Windows XP from 32 bits (NTFS) to 64 bits winthout having to reinstall same?
I Remember that Windows 2000 did this from normal partition to NTFS.
I have been having problems with .msi and other Windows Installer files. The first problem was based BITS not being enabled in the services.msc - and thus it was fixed. Some msi files, such as Apple iTunes updates and the simple usage of Windows Defender, are hindred unless I manually open services.msc via Run, then start Windows Installer Service; which has been set to start with the startup, and to do so automatically.I don't know why it's failing to start, but it is.
View 8 Replies View RelatedI'm looking to boost my computer performance in terms of speed. Simple question will an upgrade to windows 7 64bits make a difference? mainly for home enteraintment and gaming.
View 7 Replies View RelatedI am having trouble starting the BITS Service on my WinXP Pro SP1...
Because of this i am getting several errors in my event log...
Event Type:Error
Event Source:LsaSrv
Event Category:Security Package Manager
Event ID:5000
Date:2005-08-28
I've suddenly started getting bits of menus left behind on my screen - for example the 'Open Outlook' choice from clicking the Outlook icon on the toolbar stays as white text on a blue background.AVG and antimalware scans show no infection and the onboard video driver is up to date.A hijack this log looks OK.A reboot or changing the video settings gets rid of it but otherwise it hangs around annoyingly.I've searched everywhere but found nothing helpful.The computer is a DELL Vostro 200 running XP with all the service packs installed.
View 7 Replies View RelatedI have Windows XP on a DELL. I tried to download the display monitor driver for E772C. When I tried to follow the instructions after downloading which told me to follow the following path: Right click on the background. Go to properties which pulls up display properties. Click on the Settings tab. Click on the Advanced button. Click on the monitor tab. Then it said to click on Properties but is grayed out so I still cant change the color to more than 4 bits.
View 5 Replies View RelatedWhen I get to the Log On screen, two of the user pictures have some small light blue bits joined to their right. When the mouse moves over them, they get smaller, and when it is off, they go back to their original size. After logging in, this problem is continued on the desktop, where it does it around a medium sized white box in my background. It happens in any program opened up, around the top, and around the Start menu bar. After a while, Internet Explorer stops doing it, apart from on certain pages, the same each time. However, when Internet Explorer has got over the problem, any programs opened up in front of it do not have the problem, until you close or minimize Internet Explorer. It does not happen to the three other users which, on the Log On screen do not have blue bits on. The lighter bits of an image tend to get light blue bits dispersed in. Is there anything I can do? The problem started around two days ago, without any seeming action to start it.MS Paint does not stop showing blueness even with Internet Explorer open, until size of window is changed to the actual size of the canvas minus about 20 px.
View 13 Replies View RelatedI appear to have a problem with an update for windows XP. I belive my computer has been trying to update this file for some time but it is only now, when I have tried to install a new anti virus (Bit defender 2010), that it has become a real problem. Having said that it has also prevented me getting service pack 3 and explorer 7.
When using windows update I am told that the following has failed to install, Background Intelligent Transfer Service (BITS) 2.0 and WinHTTP 5.1 (KB842773). It would appear that the file has downloaded but not installed. I have followed all the microsoft suggestions, one of which resulted in my having to repair windows. I have also googled this problem and found many references to the same update but no one appears to have a solution.
XP operating system. When I receive an e-mail with several photos I usually scroll through the photos with the right arrow target. After the last photo I start seeing bits and pieces of web sites that I have visited. What is causing this and how can it be prevented? When I send an e-mail with a photo in it am I sending this junk?
View 6 Replies View RelatedI did an XP update and installed all the Windows updates. Now I cannot install my Radeon SE-DT graphics drivers. I get an "installation failed, try to install standard VGA drivers" note after the most current downloaded driver installation program runs InstallShield. I'm running on an ASUS A7V motherboard (1011 BIOS) with AMD Athlon processor and 768 MB of Crucial RAM; 2GB Maxtor drive. I'm using LiveOne Care for security.I'd lime to know if the motherboard chipset drivers can be updated from within Windows without doing the floppy disk boot.
I'm running graphics on the VGA save mode and it is goofy scrolling down a screen watching the waves as the data clunks in. Can anyone suggest an easy install? ATI Radeon has been no help so far. By the way, Device Manager shows no video display components from which verify or update drivers.
I can't install acrobat 9 standard in my laptop.
View 2 Replies View RelatedI changed it by accident one day, and I am wondering on how to get it back to the standard clear color.
View 2 Replies View RelatedJust put together my new system and all is working well, but I am left with this unknown exclamation in the "device manager". I can't figure out what it is.
The only thing device manager says is,Location: on PCI standard ISA bridge The drivers for this device are not installed. (Code 28) and in the conflicting device list it says Memory Range FED00000 - FED00FFF not available.
I need to add a printer using TCP/IP but when i click on local_printer > create a new port...the standard tcp/ip option is not there.Local Port is there but NOT Standard TCP/IP. Can this be restored and replaced?
View 3 Replies View RelatedOS: Windows XP SP3
Realtime Security Software: Avast!, ThreatFire,
Non-Realtime: Spyware Blaster, SuperAntispyware Scanner (Free Edition), Malwarebytes' Scanner
Firewall: COMODO Firewall Only
My Standard Account got reset for the 2nd time. Firstly, when I didn't use my account for 4 days once I came to log on I realised that 'Personalized Settings' was showing up at the top left hand corner. This came again after I didn't use the account for one day. By reset I mean, the background wallpaper reset to default and the desktop folders not showing up. But when I went into 'Documents and Settings' in my administrator account (which didn't get reset), all the folders were showing up in my C Drive/Documents and Settings/ folder. Once I right-clicked on a folder on my system when this happened for the first time, my system froze. The system also froze when opening any file. This started happening a few weeks after I had installed COMODO Firewall which might be a coincidence even though I don't think it is but all these error messages/dialog box popped up on my account, roughly like 'Invalid or corrupt jarfile...' but on the administrator account none of these errors showed up when this happened on my account. In addition, this issue also happened when I changed my account from Standard to Administrator but this didn't change anything. When this happened for the first time, to solve the issue I made a new account and then copied all my files/folders over from my old account to the new one but because this problem has happened again, I predict that this will keep on happening again on every new account I make. I have also run malware scans which didn't detect any viruses.
eMachines PC, less than one year old, running XP Home (ugh)While in the "Owner" administrator account, I attempted to change the user rights for my daughter from "Restricted" to "Standard user". I used the "control userpasswords2" screen rather than the standard User Accounts control panel provided with XP Home.I immediately received an error message, stating something like "this account type cannot be found" or "this account type is not supported".No big deal that, but what occurred after that stymies me. My daughter's account is no longer visible in either of the account management control panels, and is also no longer visible in the Welcome Screen. All of her folders still exist.I attempted to re-add the account, but the system (perhaps wisely) prevents me from doing that, stating that the account still exists. Using the XP Home User Accounts control panel, I turned off the Welcome Screen; user login now uses the oldskool screen within which you have to enter the user account name in one field and the password in the other. My daughter is able to login that way.
View 6 Replies View RelatedI want to replace my standard mail notification with a wav file I've downloaded.
I went to; control panel/sounds and audio devices/sounds,and replaced it. It plays fine when I get mail, but the old notification plays after it.I removed the old notification before adding the new wav file and it still is happening.
I finally broke down and went from W2K Pro to XP Pro on my new build. Almost all my apps have installed just fine but two that I need will not. They are NetObjects Fusion 7 and Adobe Elements 2.0. Both are fairly new, around 2002 or 3 releases and both are rated for XP but once I launch the setup.exe the hourglass shows for about 5 seconds and then goes back to the standard cursor. I checked the Task Manager and in both cases setup.exe is loaded and running and I have to End Process to try the setup again but the same thing happens each time to both apps. They both installed fine and I've been using them for years on my W2K Pro machine.
View 14 Replies View RelatedIs there a way that you can restrict access to the standard games that come with XP? I have gone in and put them in the list of disallowed applications by the executable name but would prefer a GPO setting to not show the menu at all and disable the games for the corporate network.
View 1 Replies View RelatedMy software in the program list eg. avg, microsoft office, logitech, icons have changed to the standard/default icon instead of the icons that come when installing these programs.
View 11 Replies View RelatedStandard XP screensaver utility stopped working. Any guesses on where I could or should start looking to fix?
View 5 Replies View Related
