My employer is using a program that is written is Visual Basic 6 and I belive uses chrystal reports to generate reports. The program is connected to an oracle 9i database. The program will print on win2k machines but on WinXP machines depending on which type of report is requested either the status bar goes 5 clicks and stops ( can close from there without a problem )or an error message pops up and states application-defined or object-defined error. The printer is a hp 2420dn i have installed a hp 895 inkjet( yes it still works) on this machine also with no luck. I have reinstalled the drivers and also downloaded the latest drivers from HP.
My dad runs a Quick-Basic program that does particle-physics calculations. He uses the command prompt to run the program. It worked fine on his old 486 (it printed the results when he hit cntrl+print-screen). Then he bought a windoze box with XP. The program still runs fine, you can see the results whizzing past. It's twenty times as fast. But we can't figure out how to print the results. The Quick-Basic code has print commands in it. They just don't seem to talk to the XP-based print que
I write a file in Word and then save it.Before I print it I usually go into Print Preview just to check things out.This time however it just showed me a blank box and the printer would not print.Everything was OK for a complete day and then the problem happened again - blank preview and no printing. This time switching off for 10 minutes and then back on had no effect.I have been trying most of today to correct things without success. I then copied it onto a floppy, put the floppy in my friends PC - same result as before
I previously owned a Lexmark Z25 printer and up to a certain point, it was printing ok. Then it abruptly stopped printing any pages. It sounded as if it was getting the signal from the computer, but nothing would print. Rather than buy new cartridges, which would have cost more than a new printer, I bought a Dell 720. Now, the color prints fine, but I cannot get the black to print. The cartridges are just about full with only a small amount out of the black cartridge.
Walk me through printing an envelope on my Lexmark X125. I have clicked on envelopes, then options for the envelope size, then print. The envelope comes out blank.
All worked as normal Printer icon would print automatically with default print settings; File -Print would bring up print properties dialogue box to select options.Unhooked printer from laptop. Since reconnecting printer, the print icon button reverts to bringing up the print properties box as happens with going File - print. There is only one printer attached - it is shown in "Printers and Faxes" with a tick. There is nowhere to check it as the default printer as it is the only printer.How can I make the print icon button just do straight default prints again?
I have an old Sony VAIO (running Win Xp) that I am using a print server. The VAIO is connected to a HP PSC. The VAIO is on a wireless network along with two other laptops. One laptop is running Win Xp and the other is running Vista. Everything was working fine as far as printing went until I reinstalled the OS on the Win Xp machine (same OS). Previously the VAIO would go offline due to hibernation and so if I tried to print something from the Xp machine, it would get in the queue and get printed when I turned the VAIO on. Now the print jobs are not getting in a queue when the VAIO is offline.I don't know what I did right before and so I don't know how to remedy the problem.
I installed a new modem the other day cause the old one got fried. Now I am trying to print and the printer keeps giving me an error message, "this document fail to print." I tried all possible troubleshooting techniques but nothing help. I don't know what to do.
Printer wont print THE printer normally prints fine but now it wont print atall the usb cable is in and the printer wont take the paper it just sits there CONTROL PANEL> PRINTERS> OPEN and it says its printing just fine but it isnt Its in the front usb hub and tried the rear it dont make any differnence. The printer is on and its got paper etc etc.
On my old coputer I could print documents so they came out with the first page on top. I ca not find how to make that happen on my new computer with XP.
I restarted my PC because it I kept getting a spooling error and I couldn't print. I was also unable to save a document. Now it won't restart. It's on, but I keep getting an error message that says, "lsass.exe - System error
My P.C. worked fine for months and then suddenly wouldnt recognise my memory sticks. It won't print via the USB ports either. Power is getting through because i can charge my mp3 player and the P.C. speakers are powered vias USB. Device manager tells me the USB ports are working correctly. I've tried loads of stuff off the web but I just can't get them to work again. I even reformatted the drive and reinstalled everything, no good.
I have a Sony Pentium 4 and Windows XP Professional. Things were working fine up until about 3 weeks ago when suddenly the system would reboot when I tried to print. The error message would take me to the Windows Update page and tell me to update the ethernet adapter, which was erroneous as it referred to an adapter I don't have. I've tried to delete the printer, but when I open the printer folder in Control Panel the system reboots before I can delete anything. I've upgraded the driver for the printer, which is an Epson C62. I've tried a system restore
I'm useing windows XP professional. I mistakenly downloaded a virus through my email. i found the virus and deleted it. i'm not sure if the virus is the cause of my problem but i can no longer print from my email or off the internet. The printer is a HP officejet 6110 all-in-one.
until recently i was able to pause the video, press print screen key, then open photoshop and open the image there. now when i try to do it i get the media player, but the screen part of it is black.
I'm running Windows XP Home Edition and right out of the blue my USB ports [all 4 of them] on my 'puter are not working. I first noticed it when I was trying to get info off one of my thumb drives. I inserted it and the thumb drives light comes on for about 2 or 3 seconds and then goes out and now when I try to print something, I get the USB error on my screen.
I have a Server 2003 SP 2 DC acting as a print server. It seems to be causing our XP SP2 clients to produce an event ID 20 print warning everytime they try to print as if the driver has changed even though it has not.
Desktop - Windows XP SP3 - AMD Athlon 1800+1.53GHz - 640MB RAM (Built 2002)(Wife's Computer) - HP 3740 Printer.I have only just fixed this PC after a 6 month viral infection and now have full security (if there is such a thing) and all seems to be working fine except that whenever I try to print, I get the Save Dialog Box (prompting a '*.xls') instead of the Print Dialog Box. Naturally with all the Malware scans and fixes that have been done, the Registry has taken alot of messing about but should be clean now. However there is an entry which I cannot find any info for; HKLMSoftwareMicrosoftWindowsCurrentversionRunlphc17aj0er6r.exe Supposedly residing in C:/Windows/System32 but I have been unable to find it there. As a temporary precaution I have renamed it's file extension. Does anyone know anything about this file and whether there may be a connection with the Save/Print problem.
Print spooler stopped. Tried to correct it by going to Start>Run>services.msc>Print Spooler.. startup type set to Automatic>Service Status set to Stopped>pressed START and got error message as follows, Error 1068 The dependancy service or group failed to start.Windows XP sp2, 512 ram. Trying to install Lexmark x3450 printer but can not change setting on print spooler to start.
WIN XP SP1 with a brother mfc attached. has been operating normally, now suddenly cannot print, or do anything other than view installed printers in control panel-printers. Message box says 'print spooler is not installed'.Can i reinstall the print server without a full WIN XP install?
I am running windows 2000, have dsl and was working fine, until yesterday morning ,no internet at all, tech support run me through steps and tried to uninstall tcp/ip, got error saying it is being used for print services for unix and i dont know how to disable that or what that means. i only have one computer did have a network setup in the past though.
As the Administrator on my home PC, I can print everything and anything, but none of my Limited account Users can print. They can see the printer and it shows that they are connecting to it, but nothing will print as long as they are logged in as a Limited User.
I have a Gateway PC. I have a Lexmark 7170 printer. When I try to add a printer, I get a message that says the printer spooler service is not running. I tried run->services.msc, selecting printer spooler, and setting startup type to automatic. I then selected dependencies, and got a message that says this service depends on the following: LexBce Server, Remote Procedure Call. What else can I try? I should say that I just had work done on my PC and the Computer Repair Place left it like this.
HP psc 2410 photosmart all-in-one printer. Whats happening is it's not printing the text of documents but if i insert a picture it will print that with no problems, even printing from the internet it will only print pictures. I scanned something that was only words and it printed that. I thought maybe it was the black ink cartrige so i put a new one in and it still isn't printing. If i put the words in a different colour it will print them just not in black.
I've got a wireless network setup in my apartment. One desktop, hardwired to a wireless router and hardwired to a printer. Two laptops, both connected to the wireless network for internet and printing. It has been working fine for over a year now. No glitches. But about a week ago, one laptop stopped being able to print. It is still connected to the network for internet, but it won't print. The other laptop is printing fine, so it shouldn't be a network problem. The desktop is printing fine too. I've tried disabling the firewall on both the laptop and the desktop. Nothing. When I try to print from Firefox, I get the following message: Printing failed when starting the document. When I try to print from Word, I get: Windows cannot print due to a problem with the current printer setup. Try one of the following: Check the printer by printing a test page from windows. Make sure the printer is turned on and online. Reinstall the printer driver. When I try to print from Notepad, I get: The RPC server is unavailable. And finally, when I go to "Printers and Faxes" in the Control Panel, right click on the printer and choose "Sharing", I get: Printer properties cannot be displayed. The print spooler service is not running.
For years I have been able to print from networked computers in my home ( two desktops running XP pro hardwired, one laptop XP wireless and one desktop xp wireless) to my main computer thru a router. The main computer ran XP home edition for years until my hard drive crashed and left me without an operating system ( The PC is an HP pavillion and had the recovery disc partitioned on the hard drive). I installed a new hard drive and was able to install XP pro from my boys computer that was received from a home school company that they use. The company had sent me a OEM version of XP pro with all their sofware on it that were copied on blank cd's. When I initially set my main computer up again I was able to print from all my computers. I then grew tired of always logging on with a password that was setup by the home school company.
Now I cannot print from any computer other than the main computer where the printer is connected. My first question would be: Can I delete the users on my main computer that were setup by the Home school company and start my own user? Next: Do I need a password? I would rather not have one. I only need one user account on the main computer. If I can delete the users and passwords, should I move any or all documents out of the user I want to delete? Will any of this solve my problem of not printing from my networked printers?
I have an interesting situation. On a 100 node network I have multiple printers with static IP?s. 1 certain printer, Marketdell, on port 172.16.2.156 is not able to be printed to from only 1 user. I have deleted the printer from the PC, shut down, turned on, Added printer opened notepad and tried to print, Can?t print. I opened up printer and faxes, double clicked on the printer and could see the empty print queue. I then opened up Marketdell Printer Properties, clicked on print test page. Received error: Test page filed to print, would you like to view the print troubleshooter for assistance.
