Gentlemen/women,
OS::: XP w/ SP2
I am having a problem.
I installed a trial version of Diskeeper (DK) two months ago� used the program with good results, let it expire, & eventually uninstalled it
When I turn on my computer, before the login screen a blue screen comes up that says:
"OODBS Program not found - skipping autocheck"
Then It goes to the login screen and It works fine. How do I remove this error?
I have an error message on startup (XP home) which reads: "lsdelete program not found - skipping AUTOCHECK". ~~
I follow this method
http://forums.techguy.org/windows-vi...ogram-not.html
I reboot the computer but still SAY:lsdelete program not found - skipping.
I seemed to have run into a problem. I'm running xp pro w/ sp2. I usually keep my computer on all the time but yesterday I turned it off. When I turned it back on this morning, I got a message "Windows could not start because the following file is missing or corrupt: windowssystem32configsystem". I followed some advise online which told me to use the recovery option using my win xp cd. When I rebooted it seemed to work ok but then came another message, "Autochk program not found- skipping Autocheck" then it reboots. It keeps doing this over and over again. I found some more advise online which told me to copy the program from my win xp cd to the harddrive using the recovery option.
View 7 Replies View RelatedI tried to log on to the internet (dial-up). The dialer panel came up, I hit dial, and it closed. I tried again with the same result. I restarted hoping it woud fix it. It got the the Windows XP loading screen, then went to a light blue screen w/ dark blue bars at the top and bottom (the new bsod) and displayed two messages that said the same thing: autochk program not found - skipping AUTOCHECK After about five seconds the computer reboots and repeats the process.
After the BIOS boot and before the Windows XP load screen, there is a recovery option. I tried this and got into the Gateway System Recovery. It says "Starting Recovery..." with a progress bar and then goes to this BSOD: STOP: c0000218 {Registry File Failure The registry cannot load the hive (file): SystemRootSystem32ConfigSECURITY or its log or alternate. It is corrupt, absent, or not writable. At this point the screen just stays there and the computer responds to nothing but the power button.
Hello, when I start up my loptap, I get this message (autoprogram no found skipping autocheck)and then nothing comes on the screen. It looks like it turns off by it self.
View 1 Replies View RelatedI recently screwed up my computer by running a crappy reg-edit program which deleted a bunch of important registry and I started to get messages asking me to insert XP SP3 CD to install the files but I didnt have one so I tried rebooting. Upon rebooting I got a black screen saying "ntoskrnl.exe is missing or corrupted please reinstall ntoskrn.exe" In my panic state I used my XP recovery disks but they just installed another version of windows on my HD. So I used my XP install CD to get into the recovery console and I copied over the files from the CD to my HD.
View 6 Replies View Relatedmy computer has been operating very slowly lately, and my computer protection software (Defender Pro 5 in 1) detected an apparently infected driver. The notification said that the driver was infected by an email virus and it recommended deleting the driver. Thinking that it couldn't cause much harm, I took the recommendation and deleted the driver. The next time I started my computer, it seemed to boot normally: it showed the normal XP home edition loading screen, then it showed the blue screen of death! The screen said something like "autocheck.exe not found. Skipping autocheck."
View 4 Replies View RelatedTried installing a program but it needed DirectX8.1.. Went to MS site and found that DX8.1 is already installed in XP. DOwnloaded and reinstalled anyway. Program still doesn't find it. Think it may be a registry problem but am hesitant to fool around with it. Anyone know how to make XP default to DX8.1? (There are other DirectX's in registry, i.e DX3, DX6 etc. Think it may be defaulting to one of these.
View 1 Replies View RelatedI tried with Partition Magic 8.0. It rebooted, and when the script would usually kick in, an error was displayed instead: xmnt2002 program not found - skipping AUTOCHECK and then it would boot. That frustrated me. I tried again, this time unhiding the partitions using grub before booting. Still, same error. So, partition magic was not going to work. Next I decided to try to go to the Linux installation directly, and use the YaST utility to resize my windows partition. I tried, but that failed as well. YaST gave me the "Failed to resize partition. The Installer will now exit" error each time I tried that. So, the Linux-rout failed as well.
By now I was quite frustrated. I decided to re-install Windows from the disks I had been provided, deleting the windows partition using the installation menu and re-installing it on a smaller portion of the unallocated space. Windows was installed using the same amount of space as the first installation -- It did not allow me to resize it's disk usage like I had planned. So, I lost all the software, but no matter, I reinstalled it all in a few hours, then attempted to resize my partition again...............
On boot up I get a notice that file americ~.dat could not be found. Everything is working ok as far as I can tell but this is busting my chops and annoying the hell out of me. I have run registry cleaners thinking this is a left over from an application I uninstalled but it still shows up. An ideas on how I can track down what is looking for this file?
View 2 Replies View RelatedWhen I start my computer I get a blue screen that says, Is delete program not found - skipping Autocheck. Not sure if it is a I or 7 in front of the delete but either way after that the system starts normally. How do I get rid of that blue screen warning?
View 2 Replies View RelatedI was attempting to install Norton System Works 2006, it failed and gave me some instructions to fix the issue which consisted of downloading 3 tools and running them to clean the failed install, and then try the install again. I tried to reboot first (I don't recall if I was instructed to or not!) and now it goes through the motions of starting up...bios screen, Norton Go Back Screen (new), XP loading screen, then I get a screen that says "autochk program not found - skipping AUTOCHECK" and it restarts
View 5 Replies View RelatedI downloaded some Registry cleaner program and I guess it was a crappy one because it must have deleted a whole bunch of important registry files. I had to reboot my system and got a message saying "ntoskrnl.exe is missing or corrupted" so in my infinite wisdom and panicked state I ran the XP recovery disks that came with my laptop (see laptop details below). But for some odd reason it just installed another version of Windows XP. Anyways after some sleuthing I used the XP disk to copy over the "ntoskrnl.exe" to my HD and all seemed okay as my original version of XP booted up okay, but then I get a blue XP screen saying "AutoChk.exe file not found- skipping AUTOCHECK" and the system restarts
View 5 Replies View RelatedI ran a scrub program to clean up a VISTA machine. then tried to load XP. Got a message about "not having drivers for the hard drive".
View 5 Replies View RelatedI have not made any changes to my system last weekend I could not get my pc to shutdown. I finally got it to reboot, but now I get a blue screen with the message "cannot find autocheck.exe". The cystem continues to cycle trying to boot or just shuts down. When i try booting using the windows XP disk, the same thing happens; as soon as it tries to load windows, it gets stuck in a boot up cycle or shuts down
View 3 Replies View Relatedthen flashes a screen too fast to read then reboots. the original system had boot issues after I used partition software to move to a bigger drive. I messes it up more using "r"repair console to replace mbr. xp setup disk doesn't see the system so it doesn't offer the repair option only the install one. If I slave it to another master WD hard drive with xp and assign it a drive letter I can see the the total contents so it's still all there just can't boot in
View 9 Replies View RelatedAutocheck always runs at boot. Only if it detects that the dirty bit has been set on a partition (indicating an abnormal shutdown of the system OR that the file system has detected an inconsistency during normal operation and automatically scheduled chkdsk to run) will it actually run CHKDSK on the indicated partitions. Chkdsk as run by Autocheck does not do as comprehensive a repair as chkdsk /r.PerfectDisk is first in the bootexecute list. When the system boots, here's what happens:- PD's boot time defrag code runs.- It looks to see if it is even supposed to run. If not, it exits.- It checks to see if the dirty bit has been set - if so, it exits to let CHKDSK run.
View 9 Replies View Relatedthe latest victim of the autochck not found rebooting cycle. I've been thru the forums looking for a solution. this link
http://www.infocellar.com/winxp/chkdsk-and-autochk.htm
provided some good info however generally the point is being missed. You cannot get into the registry to modify any autochk values.
Was just wondering if anyone would know my when I play my MP3's that the playback is skippy like. Like, its not static or garbled, Just like a CD when it skips. Streaming audio or any other audio is like MP3 playback. Why is this??
View 6 Replies View RelatedI have a Toshiba Satellite A105. Just one day the audio starting to "stuttering". When any software that is using audio "sound, speech, games, music" even just XP. I have updated all the drivers. I have deleted and reinstalled : Windows Media Player 11, Adobe Flash Player 10 Active X, and RealTex High def audio driver. I could not find any virus or spyware.
View 6 Replies View Relatedi recently just got this problem, umm the first thing i started to notice was my startup becoming extreamly slow, at that point i thought there was a problem, so when i finally got through the startup, i move my mouse around and like every few seconds it would skip, so basically you move it and then 3 seconds later it skips so you basically see a lag spike or something. it continues for awhile and then stops like maybe 10 min later. but then starts again everytime i open a program ex: counter strike, Azureus, microsoft word.
View 14 Replies View Relatedwhich started by sound crackling and then followed by cpu used up to 50 percent on a core duo2 processor which also makes disables my ,mouse temporarily but if i move the mouse on a highlighted icon it registers the mouse bieng on the icon but no pointer apears to be present it will then come back after 5secs.this hapens when i use windows media player and firefox also it hapens often,how can i fix this?
View 14 Replies View RelatedI posted a little bit back with a question about reinstalling XP; it turned out to be a bad mainboard, so. Coming back with new mainboard and everything in fact, this used to be my dad's computer with my harddrive in place of his and I'm still having problems.Namely, this weird system flutter.When I'm playing music, it sort of stutters, when I'm typing, the cursor stops and the type stops appearing for a second. I've been keeping an eye on the CPU usage in Task Manager and as far as I can tell, it doesn't have anything to do with that, and I've tried turning off the music, but I think it's still happening.It's harder to tell without the music skipping but I'm pretty sure it's done it once while I was typing this.My dad is also infamous for screwing with CPU speeds and whatnot, so it could be something along those lines.
View 14 Replies View Relatedim having a problem with my audio skipping all the time in random places ive restarted my computer, ive reinstalled driver for the audio devices ive trying everything i can think of and still nothing
View 4 Replies View RelatedHi there. I was wondering what the procedure is to deactivate the Logon screen during the bootup stage of Windows XP. I currently have no password set, and don't wish to have one either.
View 1 Replies View RelatedMy windowsXPpro has hung and given me a blue screen and it says smth like: "A problem has been detected and windows has been shut down to prevent any damage to your computer. "If this is the first time you have seen this stop error screen, restart i'm not too sure what the message is as my laptop will have restarted before i even get to read finish the screen.i knw this isn't helping much but until it happens again, i can't provide more information.
After restarting, it'll go into scandisk as normal after a crash. however, it will then scan VERY slowly until about 56% where it will hang. i think there is a last message but as it took me many MANY tries restarting and skipping scandisk
I have windows xp and I noticed that my whole computer is been running kinda choppy.anything that has audio will skip,including music,aim sounds,videos,video games,anything in general.also my mouse moves choppy.It will pause for a second and then start moving again with no problem and then pause again.The mouse mainly moves choppy when I load up certain programs.
View 14 Replies View RelatedI have a gateway laptop. about 6 months ago i was listening to music through my itunes and the songs starting skipping and the comp froze. I tried to do ctrl alt delte and couldnt so i had to shutdown by just holding the power button. The computer was also really hot when this happened. Since then I have not been able to get the computer to work. It will start about and give me the option of how i would like to start (in safe mode or regular) and no matter which option i pick it will go to the loading screen for windows xp and just sit there with the progress bar going for hours or until the comptuer dies. It never gets past this point or gives me any kind of errors.
View 1 Replies View Relatedit found the virus on the F hdd which u guys know its not the main one ...it was(virus) found on a folder i can't even see i have the "show hidden folders" on so why can't i see those folders ? i am more worried about that than the virus since my software found it im okay with it lol but i just reinstalled my os and i get a virus found on a folder i didn't know xcisted wtfuge ! ! and i have folder that are just named kinda like this "5e56dc46768be0474974c759ab4690" on some hdd any ideas? oh and i can't erase them why?
View 5 Replies View RelatedI did a free scan Xoft SpySE and it says that i have a Trojan/CWS Combo I ran my Macfee anti virus and it has found nothing therefore what do I do?
View 14 Replies View Related