Autochk Program Not Found - Install Norton System
Feb 28, 2006
I was attempting to install Norton System Works 2006, it failed and gave me some instructions to fix the issue which consisted of downloading 3 tools and running them to clean the failed install, and then try the install again. I tried to reboot first (I don't recall if I was instructed to or not!) and now it goes through the motions of starting up...bios screen, Norton Go Back Screen (new), XP loading screen, then I get a screen that says "autochk program not found - skipping AUTOCHECK" and it restarts
View 5 Replies
ADVERTISEMENT
Sep 29, 2008
I downloaded some Registry cleaner program and I guess it was a crappy one because it must have deleted a whole bunch of important registry files. I had to reboot my system and got a message saying "ntoskrnl.exe is missing or corrupted" so in my infinite wisdom and panicked state I ran the XP recovery disks that came with my laptop (see laptop details below). But for some odd reason it just installed another version of Windows XP. Anyways after some sleuthing I used the XP disk to copy over the "ntoskrnl.exe" to my HD and all seemed okay as my original version of XP booted up okay, but then I get a blue XP screen saying "AutoChk.exe file not found- skipping AUTOCHECK" and the system restarts
View 5 Replies
View Related
May 20, 2008
I tried to log on to the internet (dial-up). The dialer panel came up, I hit dial, and it closed. I tried again with the same result. I restarted hoping it woud fix it. It got the the Windows XP loading screen, then went to a light blue screen w/ dark blue bars at the top and bottom (the new bsod) and displayed two messages that said the same thing: autochk program not found - skipping AUTOCHECK After about five seconds the computer reboots and repeats the process.
After the BIOS boot and before the Windows XP load screen, there is a recovery option. I tried this and got into the Gateway System Recovery. It says "Starting Recovery..." with a progress bar and then goes to this BSOD: STOP: c0000218 {Registry File Failure The registry cannot load the hive (file): SystemRootSystem32ConfigSECURITY or its log or alternate. It is corrupt, absent, or not writable. At this point the screen just stays there and the computer responds to nothing but the power button.
View 5 Replies
View Related
Dec 20, 2007
When i start my system i get a blue screen which says "AutoChk.exe program not found- skipping AUTOCHECK"
http://img184.imageshack.us/img184/8427/chked0.jpg
The system then starts and i can see no noticeable difference. At first i ignored it and put off looking into it. It is too late to do a system restore. I have had this issue for probably almost 6 months.
I did a search and my problem seems to be a bit different than others issues people have had with this file. When i go to the system32 folder the file is there
View 14 Replies
View Related
Aug 22, 2008
My daughter thought she try to install Ubuntu 8.04.1 LTS Desktop Edition as a second OS (She received this CD in the mail) ... But after installing Ubunta she get the choices to either choice WinXP Home Edition or Ubuntu, now here is the problem. Picking WinXP Home Edition she gets the error "autochk not found - SKIPPING AUTOCHK" then a quick blue screen with a bunch of letter and numbers and then it goes back to choices of booting to WinXP Home Edition or Ununtu.
View 14 Replies
View Related
Jun 25, 2005
This is an odd problem that just won't go away, I have a friends computer who has win XP sp-2 they had Norton 2005 on it and uninstalled it cause it is just junk anyway. But the problem is that any program that needs to be installed or updated now gives the message that you need to install the norton disk in CD drive for unknownname install.In event viewer is says "Source: MsiInstaller, Type: Warning, Category: none, Event ID: 1001, Description: Detection of product '{C6F5B6CF-609C-428E-CA83176C021B}', feature 'Complete' failed during request for component'{A07EA0AF-E117-4A34-8D54-5D826F12988C}' for more help & support" blah, blah no help at web link.Also I cannot get windows update site to even load with anything in it all no message just blank, other websites seem fine.
View 7 Replies
View Related
Apr 12, 2010
I ran a scrub program to clean up a VISTA machine. then tried to load XP. Got a message about "not having drivers for the hard drive".
View 5 Replies
View Related
Oct 31, 2005
When I try to Remove Norton Program, I get this message: " The log file 'C:Program FilesNavant
avant.isu is not valid or data has been corrupted. Uninstallation cannot continue.
View 10 Replies
View Related
Feb 26, 2007
I seem to remember that there is a way to obtain Norton"s Uninstall Utility from Norton Website...but I cannot get to the proper website
View 11 Replies
View Related
Oct 17, 2006
I have just loaded Norton Anti virus and Spy sweeper on my daughters laptop and it now switches off at random times.When I rebooted I just got a black screen with a white cursor blinking at me in the top left corner.I switched it off again and when I rebooted I pushed F8 and got into windows but it switched off again after a few minutes. I have now managed to uninstall Norton and Spy sweeper and the computer is ok( 4 now!) I need to install Norton and spy sweeper as we want to get her computer up and running on the net.I have both running on my computer with no problems.Her operating system is windows XP SP2.
View 14 Replies
View Related
Mar 12, 2006
I have Defender Pro 10-1 on my computer. The Virus protection part of the program expired in just a few months and I don't want to pay more to have a new key, I paid enough already. I was trying to install Norton and it says it cannot install because Defender Pro is there. I tried to uninstall through add and remove.I tried the uninstall that came with Defender Pro, and tried to go into program files and delete the folder myself. It will not uninstall because it is still running. I have exited everything I know how to exit.
View 6 Replies
View Related
Mar 5, 2007
Tried installing a program but it needed DirectX8.1.. Went to MS site and found that DX8.1 is already installed in XP. DOwnloaded and reinstalled anyway. Program still doesn't find it. Think it may be a registry problem but am hesitant to fool around with it. Anyone know how to make XP default to DX8.1? (There are other DirectX's in registry, i.e DX3, DX6 etc. Think it may be defaulting to one of these.
View 1 Replies
View Related
Oct 25, 2005
I just noticed this yesterday on my laptop. When I boot up the computer I get a screen that says "Autochk not found -Skipping autochk.exe" then goes to my login screen and I am able to login with no visible problem. Now I cannot use the restore function, it tells me unable to restore. I also cannot defrag the drive. The computer is a Toshiba laptop 2.0 Pentium m 1g mem, 80g hard drive
View 14 Replies
View Related
Sep 10, 2006
I tried with Partition Magic 8.0. It rebooted, and when the script would usually kick in, an error was displayed instead: xmnt2002 program not found - skipping AUTOCHECK and then it would boot. That frustrated me. I tried again, this time unhiding the partitions using grub before booting. Still, same error. So, partition magic was not going to work. Next I decided to try to go to the Linux installation directly, and use the YaST utility to resize my windows partition. I tried, but that failed as well. YaST gave me the "Failed to resize partition. The Installer will now exit" error each time I tried that. So, the Linux-rout failed as well.
By now I was quite frustrated. I decided to re-install Windows from the disks I had been provided, deleting the windows partition using the installation menu and re-installing it on a smaller portion of the unallocated space. Windows was installed using the same amount of space as the first installation -- It did not allow me to resize it's disk usage like I had planned. So, I lost all the software, but no matter, I reinstalled it all in a few hours, then attempted to resize my partition again...............
View 2 Replies
View Related
Mar 18, 2007
Gentlemen/women,
OS::: XP w/ SP2
I am having a problem.
I installed a trial version of Diskeeper (DK) two months ago� used the program with good results, let it expire, & eventually uninstalled it
View 8 Replies
View Related
Aug 16, 2007
When I turn on my computer, before the login screen a blue screen comes up that says:
"OODBS Program not found - skipping autocheck"
Then It goes to the login screen and It works fine. How do I remove this error?
View 14 Replies
View Related
Sep 22, 2007
I have an error message on startup (XP home) which reads: "lsdelete program not found - skipping AUTOCHECK". ~~
I follow this method
http://forums.techguy.org/windows-vi...ogram-not.html
I reboot the computer but still SAY:lsdelete program not found - skipping.
View 1 Replies
View Related
Feb 10, 2007
On boot up I get a notice that file americ~.dat could not be found. Everything is working ok as far as I can tell but this is busting my chops and annoying the hell out of me. I have run registry cleaners thinking this is a left over from an application I uninstalled but it still shows up. An ideas on how I can track down what is looking for this file?
View 2 Replies
View Related
Aug 31, 2008
When I start my computer I get a blue screen that says, Is delete program not found - skipping Autocheck. Not sure if it is a I or 7 in front of the delete but either way after that the system starts normally. How do I get rid of that blue screen warning?
View 2 Replies
View Related
Mar 13, 2005
I seemed to have run into a problem. I'm running xp pro w/ sp2. I usually keep my computer on all the time but yesterday I turned it off. When I turned it back on this morning, I got a message "Windows could not start because the following file is missing or corrupt: windowssystem32configsystem". I followed some advise online which told me to use the recovery option using my win xp cd. When I rebooted it seemed to work ok but then came another message, "Autochk program not found- skipping Autocheck" then it reboots. It keeps doing this over and over again. I found some more advise online which told me to copy the program from my win xp cd to the harddrive using the recovery option.
View 7 Replies
View Related
May 20, 2006
it isn't acting right, but I have been trying to install norton antivirus. She bought the package and has a 2 year subscription, and afterwards we ran live update. It then asks for an activation key, which we have from the email sent to her. When we click OK to tell it that we want to put it in, it does nothing. No matter how long you wait or how many times you click OK, the box just sits there. For this reason, we cant update her virus definitions or get norton to protect her computer. norton is not the only button that will not respond. Somehow the viewpoint toolbar was installed on her computer. When we try to uninstall the viewpoint toolbar or if I go to add/remove programs and try to uninstall it from there, it brings up a box that asks are you sure you want to uninstall viewpoint It does the same as the norton box; it will not respond, even if I click yes and wait
View 5 Replies
View Related
Sep 5, 2005
I am trying to install Norton Antivirus 2005 to my computer but it will not go. All other cd's work except that one. I have Windows XP and I installed the Service Pack
View 1 Replies
View Related
Jul 2, 2005
I installed Window XP upgrade and didn't realize that it would disable my Norton antivirus 2004. After installation, Windows informed me that Norton would have to be reinstalled. I tried reinstalling it, but couldn't until the disabled one was uninstalled. When I tried to uninstall it, there were some files that the uninstall program couldn't find, so the uninstall failed. I need to know how I can get the disabled one off my system so that I can reinstall Norton again.
View 1 Replies
View Related
Jun 19, 2005
I downloaded a program from Ebay and after installing it I noticed it didn't have a uninstall. I used my add & remove program to uninstall the program but not all of it got uninstalled. I deleted the folder and then did a search in my registry for anything with refernce to the programs name "Ebay's Blackthorne" and deleted all entries with that name.Every time I reboot windows tries to install something for Blackthorne and I have to keep cancelling it out.
View 11 Replies
View Related
Jul 7, 2005
The my computer window instantly opens with all the correct icons displayed on the lest (view system information add remove programs change a setting...) but it shows no drives and I cannot click on anything. If I hit control alt delete it is reported as not responding but after about 45 seconds the rest of the icons show up. I open control pannel and try to open the system folder and nothing happens. I tried running nortons system works windoctor but after the cd launches it freezes. After about 3 hours of working on it I gave up and reinstalled windows ( i did the windows repair so I didn't lose program files and such, i did not re-initialize). After re-installing everything was going fine until last night. The same exact thing is occuring again. Ive attempted running Ad-aware and its locking up after it finds a few files, I have no clue what its finding since its locking up. Ive tried booting in safe mode but it locks up at mup.sys. Their is also no internet connection IE or Firefox can find but when I open the network connections folder it says that I am connected. Im wondering if its a bad HDD or if I've got some delayed action virus or something. Neither seems to likely to me since if it was the HDD when i ran a HDD scan (in dos from the win repair cd) it comes across as fine and the virus would have to be a delayed action one or something since it keeps hitting almost exactly a week after the problems occur.
View 7 Replies
View Related
Jul 23, 2008
I have one HP Presario C700 with Windows Vista. All my family know on XP. When i try to install windows xp , i have one problem :no HDD found. The error is : Setup did not find any HDD installed in your computer. Make sure any HDD are powered on and properly connected to your computer and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program. Setup can not continue. To quit setup press F3.” Dont have floopy disk, with pressing F6 not happens nothing. The version of Windows is SP2. When i enter in BIOS, i dont see my HDD disk.
View 1 Replies
View Related
Nov 18, 2007
I am quite familiar with desktop hardware and some software issues, so this is quite a conundrum for me. My knowledge is usually regarding older desktops and OS Systems (stuff not using firewire, but IDE, for example)
1) Introduction: Basically, I purchased a newly refurbished laptop HP Compaq NX7400 on Friday. I had them deliver it with no software as it reduced its price and I don?t like vista yet. When I went to install an OS (XP PRO SP1) it gave me an error message as follows: Setup did not find any HDD installed in your computer.
Make sure any HDD are powered on and properly connected to your computer and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program. etup can not continue. To quit setup press F3?
2) attempts to fix:
A) I formatted and partitioned my hard drive using Western Digital?s Data Life Guard (DLG) it was an 80 GB hard drive. Okay so there is one there. But the odd thing was that it was registered as a BIOS hard drive? I am not sure on this?....
View 13 Replies
View Related
Oct 10, 2007
i am new to this forum, but i have looked everywhere and i have a problem i can't seem to find the answear to. I reformated my harddrive, it is a seagate baracuda 160gb drive. I have it hooked up by raid i think. Anyways when i boot my computer it sees that i have a harddrive, but when i go to load windows it doesnt find it. I heard i need to install drivers for it, but i dont know which ones and where to get them from.
View 14 Replies
View Related
Aug 12, 2008
Try to install .net Framework 2.0 and up, Notes: I can install and uninstall .Net Framework 1. I have .Net Framework 2.0 before but my brother uninstalled it. When I start up my pc i have 3 DLL messages saying they can't be found.
View 14 Replies
View Related
Apr 15, 2005
am trying to get some extra MB for my son's computer for his hugh game he has installed. I looked in add/remove and found 3 things that are taking a lot of MB and wonder if they are needed or would hurt anything if I deleted them. Please give me your opinion on Python 2.2 and Python 2.2.1 I don't have a clue what they are for but they are taking up a whopping 22.71 MB a piece! I found yahoo install manager and compuserve also taking up a lot of MB and I don't have a clue what they are needed for either.
View 12 Replies
View Related
Aug 11, 2009
It says windows can't be started up because windowssystem32configsystem is damaged or can't be found.I already tried bootcfg but doesn't make any differnce.
View 9 Replies
View Related
