PC hdd crashed so I need to install new one. I have the OEM recovery CD but it has XP Home SP1. Also have the SP2 CD. Can I install SP2 from that CD or do I have to install the OEM CD first? Second, the PC had an ATA 100 EIDE hdd and I have a new ATA HDD but bigger. Do I have to do something with BIOS after installing the new HDD? The old hdd was 60g and new one is 160g.
View 11 Replies
Cannot access the system and was not able to ad or remove anything to recover.
View 14 Replies View Relatedhow to boot from CD on a Travel mate 2410 so I can install a fresh copy of Win XP, the problem is Ive changed / unchecked some of the start up settings in MS Config, re-booted and now the laptop loads with missing files such as: winlogon, dlls missing etc, then re-sets, Ive tried safemode but still show missing start-up files, F2 for (Phoenix Recovery Bios Utility) but dont know the password, tried comos, phoenix, 000000 and bios as the password but with no luck.
View 5 Replies View RelatedI neeed to recover my hard drive but it is a work laptop and I dont have the Windows-XP Pro CD. I could send the machine back to the head office but I will end up with a formatted drive which I dont want. Is there any way I can restore from an ASR backup without going into Xp Setup?
View 1 Replies View RelatedMy XP Home recovery disk will not install or repair anymore (the last few days I did have it up and running - but after trying to install SP2 it's crashing again). So my final chance to get this system back up and running is to try and install a "retail version" XP Pro to a new hard drive.
Can you perform a 'full installation' from a product that is listed as "upgrade" I found what I feel is a good deal on eBay - the blurb states that you can (boot from CD drive) and then when promted just insert your original XP Home or WIN98 disk which sorts out the "key problem". I have listed what this Power Seller says - I have also emailed previous buyers who say it's a great product - legal etc. But these buyers had installed over a working copy of Windows 2000 and XP Home....
First off I've searched this but haven't found the relavent information I'm looking for. Chances are I've looked or searched in the wrong places.I've heard I need to boot from disk then format, to do a clean XP install when do I format and how.Also, I'm going to be getting more RAM very shortly, probably tomorrow, and I think this is the majority of the slow, lagging problems I've been having with the laptop (only 256 now) and I was wondering if I should hold off on the re-install untill I put the new RAM in there or does that not matter.
View 7 Replies View Relatedusing do a system recovery on xo home and when I go to Windowsupdates, it says I have a problem in updating and give me 3 options 1/ find answer from Response centre, from newsgroup and cal MS. Any specific reason why when I just did a system recovery and install my NAV (updated). For some reason, when I was updatring I gpt infected by sasser but I got it fix by applying patch 835732 and run stinger.
View 3 Replies View RelatedI'm having a problem on my other laptop which uses Windows 2000. Can I install combofix and a windows 2000 recovery panel.
View 8 Replies View RelatedMy friend's computer seized up in the middle of the boot. Tried recovery, but it isn't able to go forward. The hard drive seemed to be spinning tho, so chances were good we could recover the data. I removed the hard drive and copied everything to a back-up external drive using my own computer. Replaced the hard drive in the disabled computer. Question is how do I install Windows XP? The recovery files on the hard drive are not accessible, I assume, so we can't use those - right? We misplaced the disks that came with the computer, so I'm buying a new copy of Windows XP.
View 14 Replies View RelatedRecently the machine was really running slowly and of course all the pre-installed demo applications were way beyond their expiration date so when she asked for my help, I opted for a complete HDD format and recovery installation with her original Toshiba recovery CD.Programs were still on the HDD, but All shortcut icons were gone from the desktop Keyboard and language settings had returned to original English Firefox reverted to its initial first-access home page Apps like McAffee's site advisor disappeared completely requiring reinstallation and, upon starting Open Office, it reinitiated its registration sequence I set a System Restore Point. However once again after I rebooted everything had rolled back and even my attempt to restore the machine to the point I'd set failed
View 12 Replies View RelatedMy motherboard went kaput. I got a new motherboard and was going to avoid formating by using a repair install. I did the repair install and booted to windows (in safe mode) but it crashed on agp440.sys, which seems to be a fairly common problem with outdated chipset drivers. I know I can disable this driver in the recovery console, but when I boot to my XP disk, it cannot find my XP installation, It just goes straight to the screen where I can pick a partition to install onto. How did my XP install get lost? I recently fixed up my boot records and everything was fine, I was always able to use the recovery console. Obviously the install is there since I can start booting to it.
View 4 Replies View RelatedI have an HP computer that only has the system recovery disc and not the full xp disc. SP2 came with the install. I have an XP disc just with SP1a can I do a repair install with that and then just install SP2 after?
View 6 Replies View RelatedI couldn't seem to find the appropriate section for this, so move this to another section if it's unrelated. I was reading through this networking textbook about operating systems and I just found out that a computer can have more than one operating system. I have Windows XP installed through the Data Drivers Recovery CD and that's all I got related to my computer OS WINXP. If I wanted to install Windows XP to another computer that had Windows Vista, with that CD, is it possible, even though it says Data Drivers Recovery CD? Or do I need the actual Installation of WINDOWS XP (and other OS'S?).
View 11 Replies View RelatedI have a Compaq Presario Media Center SR2034NX Desktop PC with XP installed from the factory. I needed to do a system recovery that should have put things back to the place they were when I purchased it.10-21-07. It restored things but not back to the original install.Can I do system restore without useing the programs system restore feature? If so, I could restore to an earlier date when things were ok.
View 14 Replies View RelatedHoping to avoid a full reinstall of Windows XP, I'd like to try some repair procedures. The problem is, when I launch my "Vaio PCV-RS430G" recovery disc it goes straight to Sony's proprietary recovery interface which provides ONLY the preset option to wipe my 'c' drive and reinstall Windows. According to some MS articles I've read, an XP recovery disc should allow me to access the Windows Recovery Console (by typing "R" at the welcome screen). Can anyone suggest how I can bypass the Sony recovery and get to the Windows Recovery Console?
View 2 Replies View RelatedI had a Dell with XP Media Center Edition on it and I am going to make a new build. My question is, can I use the XP Media Center RECOVERY CD that came with the dell if I were to have a new CD KEY?
View 1 Replies View RelatedTrying to recover my registry from being corrupted. I am in Windows XP Pro recovery console. But when I try At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line: md tmp copy c:windowssystem32 configsystem c:windows mpsystem.bak. It says I cannot copy the file. The file cannot be copied.
View 8 Replies View RelatedI looking for a way to make sure my Operation System is working correctly? I have a recovery disc for Windows XP PRO, but it says that it will wipe out all of my upgrades if I use it?Is there a Service Pack 2 Recovery File that I can download to a My desktop, and then burn to a CD?
View 1 Replies View RelatedI lost my system recovery disc. I also lost all of my games that came with windows...free cell, solitaire, paint..etc. I just want those back. Can I run a system recovery program on windows without a disc
View 1 Replies View RelatedI need to do a System Recovery to restore my system back to its factory settings (I'm using WinXP Home). When I hit F10 upon startup in order to access the system recovery, nothing happens- it boots as it would regularly. I was able to boot up using the CD, and am now in the System Recovery console. Might anyone tell me what I need to do to perform a non-destructive, or even a destrucitve system recovery?
View 1 Replies View RelatedMy question is regarding the recovery console available on Compaq machines. Is there a similar program to the Compaq recovery console that allows for the home user to install and back up their systems in a nearly identical manner as to how to Compaq R.C. works?
View 2 Replies View RelatedI'm running Windows XP SP3 with everything up to date as far as I know. I have the complete set of my PC's OEM Disks that I've used once when my OS was completely messed up, had Geeks Rescue out and they couldn't figure out what was wrong, so I know what they are for.What I'm not understanding are the several tools I'm afraid to open listed in my "Start"/"All Programs" I have both "Compaq"/"Compaq Presario PC Tools" with "Compaq Application Recovery"/"Compaq Recovery CD-DVD Creator"/"Compaq Recovery Tools CD"/"Compaq Support Information"/"Compaq System Recovery"/"Remote Assistance"/"Safety and Comfort Guide"
View 6 Replies View Relatedwhile trying to fix another problem, by repairing WP on an Averatec 3200, the Install went into the actual install mode, rather than the repair mode. As I don't have the security key (someone who will go un-named, but I have my suspicions, threw away the plastic CD holder with the key taped to the back) I can't continue the install and I can't get the install off the computer. The reason that I was trying to repair is that I have the Log-on Virus which makes it impossible to log on and do anything about the virus. Can't even get to SAFE mode to try to remove the virus with Spyware Doctor.
View 2 Replies View RelatedWhen i click the turn off computer button it is supposed to install an important security update. The update thing never goes away even though it looks like the update has been installad.
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.5730.0011)
HI, I just installed windows 2000 professional onto my computer. Everything works fine except that the resolution is really grainy. On some web sites I cannot even make out what the words are. I found out that when I go into my monitor settings in display properties I am unable to install the drivers for my monitor. Does anybody know a way in which I can get around this.
View 1 Replies View RelatedI have just installed a fresh copy of windows XP sp2 on 2 machines. Both Dell Optiplex desktops. Usually it prompts that it has found new hardware for each device it hasn't found drivers for. Device manager lists them with a yellow exclamation icon.Problem I have now though is that the fresh install of XP does not show these prompt at all, although device manager lists them and if i go in there and update driver the device works.The problem I have is that basically i usually copy a driver heirarchy to the systemdrive and point the registry at them, which results in automatic installation on boot. This no longer works and I assume they are related as it doesn't look like it's automatically trying to install these devices.Is there a setting somewhere, seems very strange, what with it being a fresh install?
View 11 Replies View Relatedi also get the same problem with my windows xp update and the service packs.
View 6 Replies View RelatedI need to install directx on my coputer, don't know how.
View 1 Replies View RelatedI'm trying to install my printer, usb, lexmark x75 all in one. When I try to install it I get a weird rpc server is unavailable error and it won't install it.
View 1 Replies View RelatedI have two computers, one I use for gaming, the other for school. Both computers had 60gb Maxtor (school with lots of room, gaming with about 10 gb free). My school HD took a powder (the evil clicky noise of doom), but I was able to back up my files prior to that. Me being a quick thinker, I decide to upgrade my gamer puter to a 120gb (don't wanna go too nutso, as I am considering building a much superior computer), and put the good 60 gb in my old Athlon 700. Problem? I cannot get Windows XP Home to complete install on my gamer computer. (Athlon 700 installed just fine with 'good' 60gb).Gamer Computer: Athlon 1800+, 512MB DDR Ram 2100, KR7A Raid MOBO, GeForce3 Ti 200 (128MB DDR RAM), SB Audigy 2(AGP).
It is a RAID mobo, but i do not use the raid functionality, I did not have a problem before(I have my HD and my 2 roms on ide now). I go through the install steps, and I get to the very very end, where it states you are about to start Windows XP, and then it hangs, and thats it.I have tried to ensure there are no conflicts, I pulled out my sound card as well as my network card, and 're-seated' my video card and RAM. I have tried looking at using a winxp bootup floppy, booted into safe mode (the only error it detects is the missing RAID, no conflicts detected there). Heck, I even swapped out mouse and keyboard. I tried putting back the good 60gb back in the pc, and reformatting, but still get the same thing(sometimes the screen is black, sometimes the icky blue of xp, but that's it).I have no idea now. I did make sure that my bios was up to date before taking down the system originally, and it was, so no change was made there. Even swapped out the ribbon cables to ensure nothing was damaged on original removal.
I have just installed Win XP and all the drivers needed for the hardware to work plus a few games etc. Now I wonder if there is a way to make a recovery cd of all this information so I can use that CD/DVD instead of my Win xp CD if I need to reinstall the system again.
View 3 Replies View Related
