I have two internal hard drives and one external for backups. Right now, Win XP is running on the C: drive, of course, and the F: drive is empty. Here's what I want to do:Load XP onto the F: drive. Gradually install all my applications on that drive and get them up and running -- using C: in the meantime for applications that I can't install twice on the same computer, such as Photoshop. Then turn off or remove the C: drive so the computer will recognize (and rename?) the former F: drive as the new C: drive when it boots. My main question is: What sorts of problems will this cause for programs installed on the second drive? I assume that any shortcuts would have to be re-pointed. Aside from busywork like that, what might go wrong? Is it feasible to do what I describe?
A SATA-II 250GB hard disk that I want to use to replace my C-Drive (10GB) and D-Drive (20GB), But My C-Drive (Windows), when I boot how will I partition the new drive, make one ACTIVE and somehow LOAD the ghosted C-drive backup (can I put it on multiple DVDs and make them bootable or something?) What would be the best way to "backup" these drives? Ghosting? Can this work with such LARGE drives as it would take multiple DVDs? How to leave the other 3 PATA drives where they are or do I have to change them PATA slots (from Secondary to Primary or just leave them on Secondary and have Primary empty)
I have 2000 some encrypted pictures on hard drive x.(windows xp)Hard drive x is now a slave drive on another computer. I have complete access to hard drive x, but cannot migrate my old profile/keys over to the new computer to decrypt the files.Is there any way to do this short of going back in time and not doing it to begin with?hard drive x gives the stop error when i try to boot with it and the new computer is running windows xp also
i have a p4 2.6 ghz pc running xp that i want to reformat because its pretty slow and clunky these days.My question is how can i clone the hardrive onto an external drive, reformat and than just migrate the user folders over from the disk image?I own acronis true image and wonder if i can do this with it?
Today I noticed that what WAS my E drive is now called F and what was my F drive is now called G. I don't know how it happened, but it's wreaking havoc with Adobe Premiere because on all old projects I have to relocate all files on what were F that are now on G. It's also messing up my shortcuts.
I am try to two partition drive C and drive D in my computer but only one c or d instoling. i have 4000mb hardrive,please tell me how can i instol partition in my window xp professional.
I had to buy a new Hard drive and installed it into my computer.also have a slave drive that is much smaller. the slave drive has always been drive e: or drive d:. But for some reason after I re-installed windows and ran it, it now made my slave drive into drive c: and my master drive into drive e:! How do I switch the two? The slave master is set up properly in the BIOS. The large drive is the master and the small drive is the slave. But how do I assign the c:designation to the large drive and the e: designation to the small slave drive.
When installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
I use Cobian Backup to produce a zip-file containing all files and folders, except for temporary-folders (I added an exclude-filter), of my system.Before I can rely on this method, I need to find a way of restoring the 27 gb zip-file, which I store on a networked drive, easily. how booting up a laptop with a formatted harddrive, be able to access a network-drive and extract all the contents of the networked zip-file to the hard drive?
My office has a number of mapped network drives for each user which, unfortunately, start at drive letter F.Each time a USB device is used on the computer it is also automatically assigned the drive letter F (presuming that C is hard disk and D and E are CD/DVD drives). This has to be manually changed from within Disk Management.Apparently this is as a result of physical drives taking precedent over the mapped network drives.Is there any workaround for this other than moving the mapped drive letters further along in the alphabet? - this is not really a feasible solution at this time.
A little over a year ago I purchased a used IBM Thinkpad laptop from ebay for my wife. It came with Windows 2000 Professional installed and everything worked fine. No CDs or floppies came with the computer. A couple of months later, it was stolen by one of her business associates. It eventually was recovered, but the thief had installed Windows XP along with the OS that was already installed. In trying to remove XP and return the machine to its original state, I somehow managed to eventually not be able to use either OS. As it stands now I have no OS and cannot even access my hard drive.When I boot from a floppy then try to change to C: drive, I get the error message: Invalid media type reading drive c: Abort, Retry, Fail?
A friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
XPpro with two HDs, CDr/w and DVDr/w.(D AND (E are (were?) a 20G drive which I partitioned over a year ago. This morning I came across a 4G drive in an old box. (really). Being a curious type I pulled the power and ribbon leads from the DVD and plugged them into the 4G HD, after setting the jumper to slave.Then switched on. A dos line appeared saying 'automatically configuring an F: drive' After which Windows appeared to boot up normally. Except that 'My Computer' showed no (D The 4G (F drive showed as not formated. So... I removed the 4G and replaced the leads back to the DVD. My Computer' shows 3.5 floppy Local Disk(C FRSTHAFOLD(D 9G abt Notice NO (E
Not only that but my D drive is missing lots of files and folders wont open. It seems that the partitioning has been forgotten! I have checked what bios settings there are (not many on Compaq 5000) And the bios sees my main Crive and only one 20G disk I have a bad feeling about this Is there any way to get things back to normal?
This is really a question more than a problem. I'm running a PC with 2 HDs. I am changing the boot drive C: for a larger disk. Now ordinarily I would use a backup program like Ghost or whatever. Now my situation is slightly different in that most of my startup programs are installed on my second HD E:, the C: drive being the boot drive with XP installed.
What my intention is. Is to take out drive E: Then replace that with my new drive. Then I was going to boot in Safe Mode and use the Windows Files & Transfer wizard to copy the C: drive to The new drive. The last thing to do then is swap the C: with the newly installed drive and replace the original E: drive. I hope that all makes sense.
I installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
I had to reinstall XP because of spyware issues. I saved important data on my slave drive. I reinstalled XP. Now the bios, device manager, and disk manager recognizes the slave drive but didn't assign it a drive letter. In disk manager it shows as a basic disk, NTFS, Healthy (Active), 18.65 GB,Online. When I right click the volume to assign a drive letter it is grayed out.
After working for sometime with Maxtor One Touch II external drive, I have experienced the following problem: If the computer is left for some period of inactivity, for 1-2 or more hours (the light on the drive is on and not blinking) I cannot access the drive and the OS message is "One touch is not responding". The only remedy is to restart the computer. My System consists of: WindowsXP SP2 and 512 MB Ram The Maxtor OneTouch II drive is connected via a firewire inlet of the computer, the file system being NTFS. The drive is partitioned unto 2 logical drives (~150 GB each)
After reformating my pc, my secondary hard drive is now designated as drive "D". Before the reformat it was drive "G". I have software that needs to get data from drive "G" but the drive is not designated as "G" any longer. I can't remember how to reassign the drive letters so that I can designate the secondary drive as "G".
i screwed up my registry, and of all things it was the keyboard driver or something, so theres no hope of fixing it on my computer. ive got the drive hooked up as the slave on a different computer, but i cant figure out how to edit the registry on my drive rather than the primary drive. is there any editors that will open it from a file? any way of decompiling it? theres got to be some way to edit it. also, they are both xp.
Whenever I open up My Computer and browse Local C drive, it takes at least 10 seconds to open up a single folder. I did chkdsk /f /r thing and found no errors on my C drive. I am also possitive that my PC is malware free.
I have Dell XPS w 2 hard drives. the master is 80gb(NTFS).."C" drive, and the slave is 120gb(FAT32)...."F" drivethe other day, after a re-start, Windows gave me the not so friendly message "Checking file system on F...the volume is dirty...windows is verifying files and folders.......0 percent complete"now, the problem is that it took 30 HOURS! before it completed its checkup! well, so before i panicked too much, i decided to buy an external drive to back up some stuff from the slave drive. after backing up about 20 gb worth of stuff, i re-started, and it did the same thing! tho this time it took "only" 18 HOURS to do its checking! it did say that "windows replaced bad clusters in files"
I have just bought and installed (to the point of completing initialization under Disk Management) a new 1 TB hard drive. Originally, I was planning to use it solely for data storage.However, I am thinking of installing Windows XP Pro and all the programs I currently use on it, thereby making it the new OS and programs drive, while using the original 120 GB HD as a data/backup drive.I think the main appeal of doing this, for me, is that it also presents an opportunity to reinstall Windows on a machine which hasn't had this done for more than three years, and which currently seems to take at least five minutes to boot to a "usable" state, despite having a reasonably high spec for its age (it was bought in 2001, but as a result of the upgrade
I have 69.1 memory free from 74.5 and i noticed no matter how much i delete i cant get up into the 70s.For example this month i have deleted a ton of music files that came up to about 400mb,Then a few programs that were around 50mb each and still nothing .If anything it seems i am going down in memory instead of gaining from deleting these programs.
i connected my external HDD to my system i copied some data but now i'm not able to open that drive i have partitioned the 160GB drive to 8 20GB drives bcoz i have very important data in that drive
My external drive has always been "E" and I have several desktop shortcuts that relate. Recently I inserted a flash drive containing home movies and after viewing and a reboot later I noticed that my external drive is now shown as "New Volume F". I would like to change it back to "E"
A laptop has 5 mapped drives which are only used on the office. Offline files is not an option. When a user on the road clicks on a mapped drive by mistake, the explorer window locks up while it tries to find it.
Instead of doing something sensible like taking the explorer window to C: drive or desktop, it goes to the next drive letter. Of course this is also unavailable. So the machine is essentially unusable for about 5 minutes if the user mis-clicks once.
I've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
I turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
computer's running a lil bit slow and wont allow me to install my new mobile phone software as c drive memory is full, i've tried my best to move things to the d drive hard disk but its still really full.is there any safe way of transferring most of the programs and files over to the second hard drive?
I installed an a 2.5 Toshiba notebook drive in a external enclosure and I can't get XP to recognize it. The drive spins up and the light comes on to indicate it is running but nothing is shown in device manager or My computer. It also is not shown in disk management.I have uninstalled the the USB drivers through the device manager with no change after rebooting. The USB ports work fine with my other external drive.The drive was working fine in a notebook that had a cracked screen. It is formated in NTFS. What else should I be looking at to solve this problem?
Is there a way to convert a partioned hard drive (c: / d for example and make it a single drive (c without losing all your folders and programs on the partioned drive. I am running out of space on the c: drive but the d: drive has some space left on it. And I want to just put them together as one drive.
