Install Of SP2 Won't Complete: XP Couldn't Find Ntoskrnl.exe?
Apr 3, 2007
OK, I downloaded Diskkeeper premium the other night and it ran through my disk and defragged. Later, the system (running slow) so I uninstalled it. Still ran terrible. Did a system restore and upon booting, XP couldn't find ntoskrnl.exe. I never could get xp back up and going into the recovery console from the XP setup disk showed the windows folder was empty. I'm guessing the system restore wiped it and didn't complete reloading the contents which is why it was empty. I pulled the drive and hooked it up to another system as a second drive and was able to get some vital data files but most that
I needed were corrupt and wouldn't copy.i put the drive back in the machine it was in, started a fresh install of XP sp2 and it loads all files and when it starts windows to do the install, it hangs at 33 minutes remaining. Changed the drive and started with another good drive. Same thing. Got another XP sp2 disk in case some files were corrupt on the original although I had used it many times prior with no problem. Still the same thing. Gets to 33 minutes remaining on the install and just never gets any farther
I have been searching this site for possible threads relating to my problem, but couldn't find it. I apologize if I am redundant. Windows wont boot suddenly. It had worked fine for a long time till now. It shows the Windows XP logo, but wont show the user names to log in. I tried to boot from the windows XP CD, but when it tries to fix problems, a message appears saying that Windows couldn't find a hard drive. I checked my hard drive and its perfectly connected.
I try andf keep up with some of the stuff that goes across, here. Its hard, but I always know if I got a computer problem, this is the place for help. I was looking at a computer and it always lagging. I couldn't find any bad tasks running.
I couldn't get drivers for my other keyboard so I bought a new one. The manual said to plug the keyboard then install drivers. I did that then restarted the computer. This is my keyboard: The error I got was: Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)
Click Troubleshoot to start the troubleshooter for this device. Drivers: Driver Provider: Micro Innovations Driver Date: 3/15/2007 Driver Version: 7.1.0.315 Digital Signer: Not digitally signed
I recently installed Windows XP professional on a new hard drive on Dell Inspiron 6000 laptop. The OS installed fine but now I cannot get onto internet. I have ATT/Yahoo DSL. My laptop has integrated wireless adapter. When I look under device manager -> network adapters, I only see the following listed: 1) 1394 Net Adapter 2) Bluetooth Device (Personal Area Network) 3) Bluetooth Device (RFCOMM Protocol TDI) I don't believe any of the above are for internet. On my other laptop (Dell Latitude D610), under network adapters, I do see: 1) Broadcom NetXtreme 57xx Gigabit Controller 2) Cisco Systems SSL VPN Adapter 3) Intel(R) PRO/Wireless 2200BG Network Connection Using Latitude D610 laptop, I am able to connect to the internet wireless. What do I need to do to my Inspiron 6000 to enable it to connect to the internet wireless? Under control panel -> network connections, I only see 1394 connection and Bluetooth Network Connection. No LAN 2, LAN 3, Wireless connection, etc.
I had bought several hard drives as is, hoping one of them would work. thought I had one, but turned out I couldn't install XP onto the disk, wouldn't copy any files. so I pretty much cut my loss on the drives and removed it the bad one from pc. now I get 2 options when booting windows. my original xp install, and the 2nd install that still needs to complete, how can I stop it from wanting to install xp again from the boot file and keep the original settings as they were?
I am planning to reformat my desktop this weekend. I currently have Windows ME,upgraded to Windows XP Home. I would like to buy the complete Windows XP Home (with SP2) so I can have a nice clean (and hopefully easy!) reformatting experience. Am I allowed to sell my old Windows XP Home "Upgrade" software to else on Ebay I have all the cumentation and serial numbers. Is there anything else I need to provide to a potential buyer It would be nice to recoup some of the cost of my new Window
I cannot seem to install SP2. Every time I try, it freezes up somewhere in the middle. I just tried last night, and it never made it past the first message. Something like "Initializing installation". It doesn't sound like the hard drive is doing anything. When I try to cancel the install, it will then freeze on the "Cancelling Installation" message. The only way out is to "End Task". The furthest I got was one time when it seemed to finish installing, but when it rebooted, my system was at 640 x 480 resolution, and still at SP1! I then ran a System Restore and got back to where I originally was, minus a bunch of security patches, even though the point I restored should have already had those patches
Notes:
-When trying to install, I let it run OVERNIGHT, so it has plenty of time to work.)
-System is clean of Spyware, Viruses, etc.
-System performance is pretty good, although I do get an occasional blue screen, hence the reason I'm finally trying to update.
Does anyone have any idea how to troubleshoot this?
So I had this awesome post and it was removed by ctrl z. Touch pads on laptops FTL I tell ya. I'm going to make this short and sweet. I'm using two 150gb raptor HDD's connected with SATA. I had windows vista ultimate x64 installed but I didn't like it so I decided to buy windows xp MCE 2005 and here is my problem I'm trying to do the install but it continues to give me the BSOD. Even after I read a thread about the same issue, I couldnt get pass the BSOD and the topic was locked so here I am.
My raid is set to auto detect but I dont have a raid setup since I'm allowing xp to do this for me. I did have one setup for vista but I deleted it thinking I needed to start fresh for xp am i right? I boot from CD and tried to hit F6 but nothing happens. I let it go and continue with the loading. Here's where I'm at now. Windows Setup Setup could not determine the type of one or more mass storage devices isntalled in your system, or you have chosen to manually specify an adapter. Currently , setup will load support for the following mass storage devices.....
I just bought a new motherboard which is Asus P5GD2-X. The problem occured when I tried to install it with Windows XP Professional CD. It seemed that my SATA Hdd could not be found... I cannot find any SATA driver for it in the CD or in ASUS website..
I've been trying to do a XP Home Edition repair install for a very long time now. I've restarted it a lot of times but in the "Installing Windows" section when it says setup will approximately complete in 25 mintues it starts "copying files", I get this "copy error" "Setup cannot copy the file licwmi.dl_.Ensure that the disk labeled 'Windows XP Home Edition Service Pack 1 CD' is in the drive section below, or provide the location where the file can be found."
I'm working on a ASUS F5V laptop. The system had some problems, it has to be returned to the manufacturer on an RMA, and they re-installed Windows XP Pro circa December 2007. When I got the machine back it needed many Windows updates. The first was SP3, then there were 41 OS updates, and 9 hardware and other updates. The install process got to #46 of 50, KB951847 (Updated for .NET versions 2.0 through 3.5). The screen had not moved for an hour at that point but the same screen remained. I canceled the install, it reported immediately that cancellation was taking place, and then it stopped. No indication it was rolling back the updates.
I recieved a virus and did a complete re-install of windows xp. Unfortunately I did not have a anti-virus program. I unwisely surfed the web and seemed to have contracted another virus. Trend-micro's trial program doesn't seem to be able to locate the virus. I also loaded spybot, ad-aware, and XoftSpySE, and they say I have many problems, but can't seem to fix them every time I run these programs
Built recording studio computer. Mobo Intel DP35 DP, Intel Core2, 4 GB ram,Geforce video card, M-Audio Delta sound card, Windows Xp home w/SP2 Had troubles with screen going blank every 15 minutes. Replaced screen, and video card and finally removed hard drive and formatted it to remove everything including OS. Reinstalled HD and attempted clean install of WinXp Cd w/SP2 In the middle of install I get error setup can not copy the file PLUGIN.OCX how I can complete install of WinXP
Started the pc w/the XP Home SP2 cd in, and followed prompts to do a repair install. All was going well. Got to the point of it needing to restart the computer. After the Windows logo appeared, received STOP error 7E, with no driver mentioned. (1st variable if needed is 0x0000006). Turned machine off, restarted. Same thing. Tried again, this time trying Safe Mode. I get the message "Setup cannot continue in Safe Mode, Click OK to restart".
Having a problem with the install of Service Pack 3. The update keeps picking it up but halfway through the install a popup appears to say " an additional download is needed to complete the installation.Install service pack 3 again " . Well I have installed 6 times now and the same happens every time, it doesn't say what the additional download is or where to get it from. I'm running XP which has been taking forever to start up up recently ( about 15 mins ) don't know if it's related or not?
just booted and installed windows xp SP1. I have 4 other computers connected to a working wireless router, with this computer connected by an ethernet cable. The cable is working properly, because my laptop can connect to the network through it. I need to connect to the internet on my new computer to run updates, download latest drivers, etc...basically getting this beast ready to start installing my favorite programs and games. But, when I plug the ethernet cable into the port on the mobo, windows doesnt detect it. There is no LAN option in the 'Network Connections' folder, but a '1394 Connection'. How do I get windows to reconize the port This is either a problem with the MOBO (asus crosshair) or a problem with SP1, and i dont know which
I just reinstalled WIN XP Pro, and now I sitll have the programs on the hard drive, but nothing in the "START / All Programs" menu. I recall on other Win OSs' that they had a "search for installed Program" option. Does Win XP pro have anything like that ? I am aware some programs will have to be re-installed due to regeistration issues. I am hoping not too many.
SFC /scannow says it needs to copy some files to the DLL cache but when I insert the CD it says it is the wrong CD. The CD is fine and is the correct one (MSDN subscription) and there is not a hardware problem with the CD on any disks.
Recently did a full clean up and reformatted my laptops(A51-m) HD(Hatachi ata/ide 60gb) now when i try and reinstall Windows wont see any HD.BIOS finds it fine but XP install CD wont.I looked around and most ppl say its a sata driver needed but with bios seeing it idk.
I am having a heck of a time with this. I am trying to install Windows XP on a Lenovo R60e that has a SATA hard drive. I cannot for the life of me find the driver. I cannot seem to find anything resembling this driver on Lenovo's "Driver Matrix" or anywhere else on their site. Is there a generic one out there that anyone knows of? I want to slipstream this into an XP install, but I can't do it without the driver.
my XP install started acting up and whenever it loaded the XP boot screen, my HDD light stayed on, and after a couple of minutes, my computer restarted itself. To find the problem, I started XP in safe mode, and it went to load up till a file mup.sys(?), can't remember. I re-plugged my SATA cable (I have a Samsung SpinPoint 160GB on a MSI P965 Neo-F running a Core 2 Duo E6600 at stock clocks), switched the cable, and checked that my mobo's bios was emulating the RAID device on IDE. The thing is, every other OS finds my HDD (even Win 2000!): Linux, Vista, Mac OS-X (I was desperate). I'm running openSUSE 10.2 right now, and I desperately need Windows back! My dad won't let me install Vista yet.
I Should re-install my Windows XP Professional. I have One problem. I bring the windows installation CD in Italy this summer to install also WinXP English version onto my PC I have there. Basicaly I do allways and often backup of everything. I have a backup of the install CD files since I bought my new PC(2006). But No way to find a notepad backup or any backup of the windows regkey who came with my windows Installation CD. There is anyway to find that key in the files of the installation CD?
I recently purchased a Western Digital laptop hard drive for my HP Presario X1015US laptop - and got the part where it said : Setup did not find any hard disk drives installed on my computer. I have tried two new drives now and it is simply not getting past this point. I have gone in to the bios to ensure it is booting from Windows Operating System CD and it is still not finding. HP told me I have to check motherboard? Is there anything else I can do or am I going to need to buy a new laptop (the old hard drive is no longer working...started making weird noise).
I've been trying to install Windows XP on a HP Compaq 6710b. It's my friends laptop, it shipped with Vista and she hates it so I'm giving her one of my copies of XP to use, because I'm so nice and whatnot. It boots into Windows Setup, checks everything, and then tells me that it can't find a hard drive for it to install Windows on, and the only option is to press F3 to restart. Is there some step I'm missing to turn on the hard drive before I install? Is this a problem with HP products, or have I just forgot to press some button?
I am running Windows XP and have tried to uninstall imesh. One of two things happens. One is that, in the add/remove programs, when i try to uninstall, it simply freezes up or...i get the "can't find install.log file" message. I redownloaded the program, but that doesn't help; nothing changes.
My motherboard went kaput. I got a new motherboard and was going to avoid formating by using a repair install. I did the repair install and booted to windows (in safe mode) but it crashed on agp440.sys, which seems to be a fairly common problem with outdated chipset drivers. I know I can disable this driver in the recovery console, but when I boot to my XP disk, it cannot find my XP installation, It just goes straight to the screen where I can pick a partition to install onto. How did my XP install get lost? I recently fixed up my boot records and everything was fine, I was always able to use the recovery console. Obviously the install is there since I can start booting to it.
I am going to install a new OS Windows XP , Home with sp2 on my computer , at least try. Now i remember that the network adaptor is one of the things i need to d/l drivers for , well i have already run into trouble i have a Intel Pro/1000 CT network adapter and can not find the driver for it.
ve just reinstalled the operating system on my pc as it was running very slow and kept hangin,all is working fine but i now have no sound through my speakers at all,and cannot find the drivers disk for my motherboard how can i get my sound back
I am getting ready to install this to test some software and I wonder about the uninstall process. I did not find it addressed on Microsoft's website.If it works, I will be getting some new hardware and I will not need it on the original PC any more.
