I've been trying to install Windows XP on a HP Compaq 6710b. It's my friends laptop, it shipped with Vista and she hates it so I'm giving her one of my copies of XP to use, because I'm so nice and whatnot. It boots into Windows Setup, checks everything, and then tells me that it can't find a hard drive for it to install Windows on, and the only option is to press F3 to restart. Is there some step I'm missing to turn on the hard drive before I install? Is this a problem with HP products, or have I just forgot to press some button?
i have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP . well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
ive got a hard drive that i could accsess all the time. Then one day no workie now when I try to acceses the drive I get a window that pops up and says Compaq Recovery partition warning. This area of your hard disk (or partition)contains files used for your system recovery. donot delete or alter these files. anychange to these files could delete or alter these files
I have a compaq presario x1000 that is virus infected. it loads windows very slow and the dvd cum cd rom does not work. how can i reformat my laptop? is it possible to boot it using a usb pen drive since my dvd cum cd rom does not work?
Windows XP home cannot find 2nd hard drive, it does not show up in disk management. It does show up in the bios.At one point it did show up, healthy formatted NTFS drive.I was able to add a fileafter that it was gone.I have one user account, and GUEST account.I checked permissions and set them all to enable.
I've installed Win XP on a new drive and am now using my old boot drive as a slave, which I will now use for backup. Before I format my old drive and wipe it clean, I would like to copy the files from My Documents on the old drive and save them to my new drive. But I can't find those files on the old drive. Where is the My Documents folder on that drive?
I recently had Spyware on my computer, after I deleted it and rebooted the error message came up <windows root> system32hal.dll. missing ! I tried to reboot using the recovery console on the windows CD but windows cannot find the Sata hard drive at all So I cant use the CD to reinstall windows over existing windows either I have access to another system, without a floppy drive but not sure what the best method of solving this problem is...Dont want to reformat as I have things on the H/D I need, I know I should have backed up...unfortunately I didnt, wont happen again though, lesson well and truly learned
I have been searching this site for possible threads relating to my problem, but couldn't find it. I apologize if I am redundant. Windows wont boot suddenly. It had worked fine for a long time till now. It shows the Windows XP logo, but wont show the user names to log in. I tried to boot from the windows XP CD, but when it tries to fix problems, a message appears saying that Windows couldn't find a hard drive. I checked my hard drive and its perfectly connected.
I decided to reinstall my windows xp formatting hard drive but after it asks me to agree with the license agreements it says windows could not find a hard drive in your computer.windows cannot continue setup press F3 to quit.so can someone tell me how do i resolve the hard drive problem?I have ASRock 775VM8 mobo Western Digital SATA 160 gigs and pentium 4 3.06 ghz.
I'm going crazy with this issue and I cannot find any possible solutions. I hope someone in here can help me somehow.Let me explain what's my situation. I have a SATA drive (WD 160GB) I had Windows XP installed on my machine until yesterday that I decided to try a beta version of Vista. Now, I want to get rid of Windows Vista and install XP again. However, when I insert my CD to boot, after it loads all the files,etc...It shows me this message Quote: Setup did not find any hard disk drives installed in your computer.
Quote :Make sure any hard drives are powered on properly connected to your computer,and that any disk-related hardware configuration is correct.This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3.
I'm can't get WinXP installation to find my Sata Hard-drive. I'm running Suse Linux on my IDE-HD and I could also had no problems getting my Suse 10.1 installation to install on the SATA-HD. I've booted up with winxp media install disk and tried to use the F6 key at the right time but nothing happens so it keeps going until I get to the point where I can press the S key to install SATA RAID driver from disk that came with my motherboard. The drivers install but then windows install still says no disk to install windows... I don't get it.
I've checked my bios and SATA in there, in fact the first thing I see when I boot up in the boot sequence is the SATA drive. Linux knows it's there but windows install doesn't. I installed XP on a WD SATA drive before and all I had to do was press F6 to install the controller from the XP disk but that doesn't work now.
Cannot reformat it, because it's the only hard drive with my information left on it. The one it came from was totalled and there's no way to back it up.On startup, it recognizes that the hard drive is in. But it doesn't show up on My Computer.
something really weird is happening to my pc.in my hard drive, with a size is 60 gb, i have a folder, inside my docs, that says that i have 42 gb of things. but when a look inside that folder there is nothing. i saw in each folder inside documents and setings and nothing.i saw in temps folders inside of windows folder and i ran the windows utility to clean up and mantainance of my hard drive and i got nothing as a result.i tried crap cleaner, and its usefull, but the problem persist. i dont have a lot of apps installed or mp3 org jpg, files, so i dont know how to start.
I'm trying to help my friend install XP Home on his Dell Inspiron 1525 laptop. The laptop is currently running Vista, and he wants XP so that he can play KOTOR.The problem is that when I insert the CD and boot from it, the setup loads fine to the point where it gives the option to set up Windows XP, to repair Windows XP, etc. When I press enter to "set up Windows XP", it gives a message:"Setup did not find any hard disk drives installed in your computer. Make sure any hard drsk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program
My brother has a Dell laptop that came pre-loaded with Vista. He asked me to remove it and install XP for him. I've re-installed XP on several computers but I'm stuck here.
When I boot from my XP disk, I press enter to install a new copy of XP, but then it says it cannot find a hard drive and setup cannot continue
I plugged in my WD passport external hard drive into my USB port on my pc that has a newly installed copy of windows xp professional. The new hardware installer pops up, I chose the auto find drivers. Then it copied over called Initio. After that I got another little window asking to give the location of this missing file ivusbWxp86.sys.
my system crashed for no reason. when i started it back up, it was in dos with the menu of 4 boot options. hard drive, cd rom etc.. it wont boot from hard drive so i put the windows disc in and tried to boot from it. it tried to setup but it said it cant find a hard drive and to exit setup.
I have a desktop computer which doesn't boot up anymore. It currently has Windows ME on the drive. I want to reformat the drive and reinstall Windows.
I have taken the drive out of the computer and am going to put the drive into an external USB Hard Drive enclosure. Can I reformat/partition and install Windows 2000 Profesional onto this drive via the USB Hard Drive enclosure?
I'll be hooking the USB Hard Drive enclosure up to my laptop which is running Windows XP.
I can not boot from DVD's laptop (just from floppy), and I have winxp kit on harddrive. Can I install it from there (an how) or from LAN (my laptop can not boot from LAN)?
computer about 5 years ago, it came with Windows XP Home edition reinstalled. The manufacture did not include a windows XP Home disc - instead there is a Windows XP Home code sticker on the back of the computer.
I have to replace the hard drive and do not wish to pay the retailer to reload windows XP Home -have installed other Windows operating systems and hard drives � so I have the skills for this task. Now my million dollar question - Product key codes with Windows XP; f I borrowed a retail copy of Windows XP Home can I use the Windows code from the Microsoft Windows XP Home sticker on my computer to reinstall Windows XP Home on my system and activate it or do I need a new key code?
Just bought a 300Gig Maxtor SATA hard drive. My supports the connection onboard. How do I get Windows XP pro to reconized the full 300Gigs and not just 137Gigs. I have a Intel(R) Desktop board D85GVHZ Base System Intel(R) Celeron CPU 3.06Hz 512MB of ram.
I was asked by a friend to install a brand new harddrive on his computer. His old one is completely burned up and will not work at all. He sent me the computer with no hard drive and the new one still in the box. I formatted the harddrive using external enclosure and my computer. Now I'm stuck. How do you install windows on the harddrive. I put the cd in the drive and turn on the computer. All I get is a message: NTLDR is missing. Hit cntl+alt+del to restart.How do I Install windows xp onto this harddrive when I can't get past this message?
To anyone that might be able to help... I've had this external hard drive for a long time and I haven't been able to access it to store lots of music and videos on. My computer sees that it is there, but like I had said earlier, I can't use it. It won't let me see it unless I go to Device Manager. My computer is getting old on me and it's been places most labtops shouldn't have gone... Once in Purgatory, and now, it's on Hell's surface. I get the safely remove hardware icon down by my clock, but I don't want to remove it, I want to use it. I want it to show up in my drives so I can instantly see how much space I have left and what not... I went through the Troubleshooter, tried every possible way that I can think of, the ways the troubleshooter.
I'm having problems formatting a hdd to install Winxp. A friend gave me his old HP 743a comp (2.4 Ghz, 512 mb ram) because the monitor kept going black. I am fairly sure the problem was one of the CPU heatsink clips was broken and not allowing contact between heatsink and cpu. It doesn't go black now that I have fixed the clip. He removed his HDD, so I bought a second hand 10 Gb just to see if I could get the thing running. I formatted the HDD with a win98se boot disk. Everything goes well except I can't get the "start with cdrom support" page to come up. The Cd drive is a CD-RW/DVD combo drive (32 x 10 x 12 x 40x). Sorry I can't find the brand and model number at the moment. I did check up on it a week ago and it's only supported by win2000 and winxp. I was wondering if this could be the problem?
I have a Sony VAIO desktop running Windows XP. I purchased a Comstar 160MB External USB2 Hard-Drive and installed it. Since Windows XP is supposed to have the drivers that are necessary, no driver disk was included, and none was needed.The problem developed when my Windows XP began to give me problems later. I had to re-install Windows XP. I did that, and I downloaded all Windows XP up dates (including Service Pack 2). Now, this Windows installation does not install the external hard-drive. Windows recognizes that there is "a USB2 device," but Windows states that there are no drivers and asks me to furnish them.
I would like to have a go at this slipstreaming thing, since I cannot install Windows XP Pro (it's a retail version from my desktop pc, which I'm now getting rid of) on my Toshiba laptop - it won't recognize the hard drive. I know how to do it, but I don't know which files (SATA drivers) to include in it. The harddrive is new (didn't come with the laptop) and it's a Samsung HM120JI, but it seems to be compatible, since the recovery disk worked fine and I am now running Windows XP home edition.
I'm upgrading my hard drive and here's the order I'm thinking of... 1. BIOS update. I know, if it ain't broke don't fix it but my board is about 2 years old and the current BIOS revision is fairly stable and comlpete plus I figured if I'm ever going to do a BIOS update I should do it immediately preceeding a clean install Also, supposedly my ASUS board has some feature that will prevent you from being screwed even if you have a bad flash. OS with required serial drivers. not really sure what that involves but in another thread I was told I needed to have the serial drivers ready to go and push F6 when it asks for them at the beginning of the install (I've seen that screen on previous installs but I've never had to mess with it).
My home computer just crashe I got a blue screen, and i have lost my Recovery CD, so i tooke the Hard drive to my Office and installed on another PC as SLAVE (running windows XP) I backed up all my Data and then I formated the Hard Drive as NTFS, but now that i installed back the hard drive to my computer, i can't install the windows xp, I have de WIn XP CD, and I chosed to boot from the CD-ROM here the CD is but it doesn't work... what can I do...? How can I boot the PC to install windows XP?
