Can't Install On My Hard Drive - Cd Doesn't Works
Oct 14, 2005
My home computer just crashe I got a blue screen, and i have lost my Recovery CD, so i tooke the Hard drive to my Office and installed on another PC as SLAVE (running windows XP) I backed up all my Data and then I formated the Hard Drive as NTFS, but now that i installed back the hard drive to my computer, i can't install the windows xp, I have de WIn XP CD, and I chosed to boot from the CD-ROM here the CD is but it doesn't work... what can I do...? How can I boot the PC to install windows XP?
View 10 Replies
ADVERTISEMENT
Oct 6, 2010
My problem in a nutshell. I'm trying to install XP as a repair but it isn't going well. I've done it before and I'm quite familiar with the steps, but this time there is one new wrinkle. Windows tells me it sees two partitions, which it shouldn't. There is only one, but it is comprised of two HDD's in a stripe setup. There is a total of 1.2TB of space between the two of them. The free space is somewhere in the 800-900 GB range before the machine started having problems. Windows keeps saying that there is only 900 MB of free space, which is not enough to install windows. Laughable. There is a ton of free space on those drives, and there is an existing XP installation, albiet one that doesn't work.
View 3 Replies
View Related
Oct 28, 2007
So, I have the same problem few seems to have here, my 2nd HDD doesn't show up. The problem came when I formated my main HDD and installed XP on it. After that I can't get the 2nd HDD working.First of all, it shows on BIOS, its connected with cables (tried several, thought if the cables were broken), shows on control panel, on system. But I can't see any drives, not a single one. It has worked correctly for over 5 years, which 4 of them has been with the main HDD and XP, the same thing I have now.The 2nd HDD is Samsung SV4002H, I have few pics to clear the problem.
View 8 Replies
View Related
May 21, 2009
Here's my problem, for no apparent reason my hard drives are not listed under the disk management utility(cd drives appear). They appear on "my computer" correctly, they show up in "Device Manager"(and I have no yellow question marks).In addition in "disk defragmenter" they appear but I'm unable to even run the analyse command(using other software I'm able to defragment them).I've tried EaseusParttion Manager, but the drives don't appear as well.I'm not able to use USB drives as well(I assume it is related), they appear in the right side of the task bar and they appear in "device manager" but not in "my computer" nor "Disk Management
View 9 Replies
View Related
Aug 19, 2009
I am running XP Pro on my computer. On another drive I have windows 7. My computer stopped booting to my XP drive all of a sudden, but it would let me boot to my Windows 7 drive. That lasted for about 3 days. Now I can't boot to either drive. When I start the computer it says there is no HDD. I tried to use the XP disk to repair, that didn't work., so I thought I'd do an XP install. But my hard drive doesn't show up all the time. Or it will show the HDD but upon trying to pick a partition to set up XP in, it then tell me there is no HDD. I get the blue screen of death, and have to manually force a shut down. Other times it tell me that the HDD is RAW, and it needs to be formatted. How can I get the HDD to format? Is there a way to do it through DOS. Sometimes I can't even get to the DOS prompt. The bootup section is corrupt. I need to repair it, but can't if the system doesn't see my HDD.
View 8 Replies
View Related
Apr 7, 2010
I have spent a long time struggling with Windows over different errors, which all lead back to page file problems, which ultimately all led back to my RAM. I found this out after XP's system file went irreparably corrupt, when my hackintosh (installed on a different hard drive) started experiencing the same problems.Bad RAM has been removed, and I'm trying to reinstall XP. I formatted the drive using OSX's Disk Utility program, wrote zeros to the entire surface, and partitioned it in FAT32 (Disk Utility can not format to NTSC).When I use my CD to reinstall Windows, it does not read the full drive. It instead offers to install XP on a 130gb drive where my 640gb drive is. If I follow it through, it installs just fine, but it formats my 640gb drive to only have one usable NTSC partition of 130gb.The last time I attempted this, I removed every drive and storage device from my computer except for the 640gb drive and the same thing still happened.
View 5 Replies
View Related
Aug 2, 2008
Well I have an hard drive into a external enclousure but the windows XP of a new CPU do not finish detect it when I connect it. But the same external hard drive work fine in my laptop. I formated my CPU 2 times, but i got the same error of Windows. My CPU has a new motherboard Foxconn M7VMX-K.
The USB ports work fine with my pendrive.
In my computer i can see a new hard drive with a letter (K, whithout data.
The Windows XP Administrator Disk doesn't show nothing about the external hard drive.
View 6 Replies
View Related
Jul 2, 2008
i have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
View 5 Replies
View Related
Nov 13, 2008
when I was formatting his pc (for win xp) through bootable cd i formatted his C drive keeping xp cd in drive, later i came to know his drive dsn't read cd properly and unable to complete installation, he dnt have floppy drive. I have portable HDD(hitachi 80GB) and want to install xp via usb(hard disk), is it posible?? nd How to do?
View 4 Replies
View Related
Feb 8, 2005
Some how I have 2 WIN 2000 Pro on my computer. One works and the other doesnt, so how do delete the one that doesnt work?
View 6 Replies
View Related
Sep 29, 2007
Windows XP Home : My desktop boots only in safe mode and system restore fails. Last known good configuration doesn't work too. Normal boot falls in a restart loop. Can somebody help, please ? Problem created by malware (trojans,worms,etc).I use Avast antivirus.
View 8 Replies
View Related
Jan 14, 2005
I have a desktop computer which doesn't boot up anymore. It currently has Windows ME on the drive. I want to reformat the drive and reinstall Windows.
I have taken the drive out of the computer and am going to put the drive into an external USB Hard Drive enclosure. Can I reformat/partition and install Windows 2000 Profesional onto this drive via the USB Hard Drive enclosure?
I'll be hooking the USB Hard Drive enclosure up to my laptop which is running Windows XP.
View 5 Replies
View Related
Jun 29, 2005
I can not boot from DVD's laptop (just from floppy), and I have winxp kit on harddrive. Can I install it from there (an how) or from LAN (my laptop can not boot from LAN)?
View 2 Replies
View Related
Aug 29, 2007
computer about 5 years ago, it came with Windows XP Home edition reinstalled. The manufacture did not include a windows XP Home disc - instead there is a Windows XP Home code sticker on the back of the computer.
I have to replace the hard drive and do not wish to pay the retailer to reload windows XP Home -have installed other Windows operating systems and hard drives � so I have the skills for this task. Now my million dollar question - Product key codes with Windows XP; f I borrowed a retail copy of Windows XP Home can I use the Windows code from the Microsoft Windows XP Home sticker on my computer to reinstall Windows XP Home on my system and activate it or do I need a new key code?
View 14 Replies
View Related
Mar 3, 2006
Just bought a 300Gig Maxtor SATA hard drive. My supports the connection onboard. How do I get Windows XP pro to reconized the full 300Gigs and not just 137Gigs. I have a Intel(R) Desktop board D85GVHZ Base System
Intel(R) Celeron CPU 3.06Hz 512MB of ram.
View 3 Replies
View Related
Sep 8, 2008
I was asked by a friend to install a brand new harddrive on his computer. His old one is completely burned up and will not work at all. He sent me the computer with no hard drive and the new one still in the box. I formatted the harddrive using external enclosure and my computer. Now I'm stuck. How do you install windows on the harddrive. I put the cd in the drive and turn on the computer. All I get is a message: NTLDR is missing. Hit cntl+alt+del to restart.How do I Install windows xp onto this harddrive when I can't get past this message?
View 4 Replies
View Related
Dec 27, 2005
How do you install XP directly from harddrive?" by extracting the info from the disk?
View 7 Replies
View Related
Aug 20, 2005
To anyone that might be able to help... I've had this external hard drive for a long time and I haven't been able to access it to store lots of music and videos on. My computer sees that it is there, but like I had said earlier, I can't use it. It won't let me see it unless I go to Device Manager. My computer is getting old on me and it's been places most labtops shouldn't have gone... Once in Purgatory, and now, it's on Hell's surface. I get the safely remove hardware icon down by my clock, but I don't want to remove it, I want to use it. I want it to show up in my drives so I can instantly see how much space I have left and what not... I went through the Troubleshooter, tried every possible way that I can think of, the ways the troubleshooter.
View 2 Replies
View Related
Jun 13, 2006
I'm having problems formatting a hdd to install Winxp. A friend gave me his old HP 743a comp (2.4 Ghz, 512 mb ram) because the monitor kept going black. I am fairly sure the problem was one of the CPU heatsink clips was broken and not allowing contact between heatsink and cpu. It doesn't go black now that I have fixed the clip. He removed his HDD, so I bought a second hand 10 Gb just to see if I could get the thing running. I formatted the HDD with a win98se boot disk. Everything goes well except I can't get the "start with cdrom support" page to come up. The Cd drive is a CD-RW/DVD combo drive (32 x 10 x 12 x 40x). Sorry I can't find the brand and model number at the moment. I did check up on it a week ago and it's only supported by win2000 and winxp. I was wondering if this could be the problem?
View 4 Replies
View Related
May 5, 2006
I have a Sony VAIO desktop running Windows XP. I purchased a Comstar 160MB External USB2 Hard-Drive and installed it. Since Windows XP is supposed to have the drivers that are necessary, no driver disk was included, and none was needed.The problem developed when my Windows XP began to give me problems later. I had to re-install Windows XP. I did that, and I downloaded all Windows XP up dates (including Service Pack 2). Now, this Windows installation does not install the external hard-drive. Windows recognizes that there is "a USB2 device," but Windows states that there are no drivers and asks me to furnish them.
View 2 Replies
View Related
Nov 21, 2007
I would like to have a go at this slipstreaming thing, since I cannot install Windows XP Pro (it's a retail version from my desktop pc, which I'm now getting rid of) on my Toshiba laptop - it won't recognize the hard drive. I know how to do it, but I don't know which files (SATA drivers) to include in it. The harddrive is new (didn't come with the laptop) and it's a Samsung HM120JI, but it seems to be compatible, since the recovery disk worked fine and I am now running Windows XP home edition.
View 14 Replies
View Related
Jan 31, 2007
I'm upgrading my hard drive and here's the order I'm thinking of... 1. BIOS update. I know, if it ain't broke don't fix it but my board is about 2 years old and the current BIOS revision is fairly stable and comlpete plus I figured if I'm ever going to do a BIOS update I should do it immediately preceeding a clean install Also, supposedly my ASUS board has some feature that will prevent you from being screwed even if you have a bad flash. OS with required serial drivers. not really sure what that involves but in another thread I was told I needed to have the serial drivers ready to go and push F6 when it asks for them at the beginning of the install (I've seen that screen on previous installs but I've never had to mess with it).
View 5 Replies
View Related
Sep 15, 2005
Any possible solutions? where can i go to get a new disc, I have no idea where it went.
View 3 Replies
View Related
Sep 28, 2007
Sometime early next year I will be building a new system. The system will likely have one large hard drive. As of now I will be installing XP Pro. I was curious how everyone else splits up their drive. How big of a partition is generally created for the OS. And do most people partition the remaining space.Now a file architecture question. When non OS applications games, utilities, MS Office, etc.) are installed do most people put then in D:Program Files Or create separate sub-folders for the broad categories and install them in the appropriate sub folder.
View 1 Replies
View Related
Sep 28, 2010
I have a computer that Im trying to fix, the only way to input to the computer at this point and time is the hard drives. I have a working computer obviously. So could I take the hard drive out of the broken computer, give it two partitions, copy the windows install to one partition, start the the install in the broken computer from that partition and install that onto the second partition? Ive heard of this being down but I am no expert.
View 3 Replies
View Related
Mar 4, 2009
I just put together a desktop with an Asus A7V880 mobo and after I installed XP on my Seagate SATA Baracuda 7200.1 120Gb harddrive I was running windows and it shutdown and said it had to shutdown to protect my computer and now I think there is some corrupt data onit that will not delete off the hard drive.I have tried many many differe nt things to delete the drive so I can reinstall windows onit.It shows up in my computer in the bios but not in windows windows and will not format either.I just bought a seagate 40Gb hardrive just like it for the computer also I have installed windows onit and it runs good ,but it sometimes tells me it has to studown to protect computer to but it will still reboot.I have ran Seatools on the hard drive and it finds errors on the drive and ask me if I want to repair them and I do and it shows them as repaired.It says passed after repair right,then I try to rescan it again to see if it fixed them ,but it the errors still show up again just like the first seatools scan.I have just about ran out of options on how to delete the hard drive.
View 2 Replies
View Related
Jan 3, 2008
I've been trying to install Windows XP on a HP Compaq 6710b. It's my friends laptop, it shipped with Vista and she hates it so I'm giving her one of my copies of XP to use, because I'm so nice and whatnot. It boots into Windows Setup, checks everything, and then tells me that it can't find a hard drive for it to install Windows on, and the only option is to press F3 to restart. Is there some step I'm missing to turn on the hard drive before I install? Is this a problem with HP products, or have I just forgot to press some button?
View 3 Replies
View Related
Jul 17, 2008
i was currently running windows as my only operating system (working perfectly) and decided to try out ubuntu. afterin installing it i decided i didn't like it so i put in my windows CD and deleated the 1st 3 partitions and combined them into a 49gb partition, formatted it and installed windows on it.this worked fine, it formatted correcly and then started copying the setup files onto partition 1, but then after it restarted it wudnt see that windows was there and wudn't continue the installation. it would just go back to asking if i wanted to install from the CD again. i was installing windows xp (no service pack) but i have done this many times with this CD and hasnt stuffed up yet.
View 2 Replies
View Related
Feb 24, 2008
I installed xp version 5.1 on my pc today after a hard drive crash and I have a few questions.explain it like your telling a 5 year old Do I need the SP2. I tried my best to find out if I had it and I don't think I do. The PC has a nvidia geforce 4200 video card and I don't think the pc is using it. How do I check.
View 8 Replies
View Related
Oct 9, 2006
My XP Pro has an old 40GB harddrive. I have a new 60GB I want to switch into it. My plan is to slave the 60 and use something like True Image to transfer all. I want to remove the 40 completely. Will this violate MS license? Will I have to reactivate? Am I on the right track?
View 3 Replies
View Related
May 18, 2006
I got a 120 gb seagate harddrive, followed the instructions on install and made it the boot drive. I then wiped the old 40gb clean. I got notification from MS that due to significant hardware changes I had to run the genuine checker again. ok did it. I am having problems with random programs freezing up, just about anything done with either disk drive (dvd or cd)when done the program will hang up and a restart is the only way to get out of it (nero). I tried to open system restore and it will not open say a error occurred and it needs to shut down,want to send ms a notice. I ran error check on the drive its ok, I tried to run system file checker but it wont open either.I tried to run repair on the os (xp pro) but it is oem and that option is not available, only a complete reinstall which will lose my files.
View 9 Replies
View Related
