Installion - Cannot Find Hard Drive - Harddrsk Drives Are Powered On
Dec 13, 2008
I'm trying to help my friend install XP Home on his Dell Inspiron 1525 laptop. The laptop is currently running Vista, and he wants XP so that he can play KOTOR.The problem is that when I insert the CD and boot from it, the setup loads fine to the point where it gives the option to set up Windows XP, to repair Windows XP, etc. When I press enter to "set up Windows XP", it gives a message:"Setup did not find any hard disk drives installed in your computer. Make sure any hard drsk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program
View 2 Replies
ADVERTISEMENT
Dec 4, 2005
I have an HP Pavillion zv5000.Windows xp sp2.I was online and the laptop and got a blue screen of death
don't recall exactly what it said, something about ie encountering an error and needing to shut down.Went to reboot, and it tried to boot off of LAN.checked my BIOS everything seemed fine, disabled that boot option.
Tried to reboot again, got a plashing flat cursor in upper left hand corner.Tried to use Norton Disk, scanned memory only.Did not scan boot.Tried to use XP disk to repair, and it came up with screen saying that
it could not find any hard drives on this computer.What happened to me, is it viral, or hardware.This laptop is only a year old, but no longer under warranty.
View 12 Replies
View Related
Apr 10, 2010
I have this PC and the current HD has a virus on it, so I am trying to format with a new copy of Windows XP SP1. The hard drive is an IDE and the jumper is set on CS. But when it goes to install Windows, it tells me "Setup did not find any hard disk drives installed" I thought this was a problem with SATA Hds???? It's a built PC, the motherboard is a ASUS P5GD1-VM
View 15 Replies
View Related
May 24, 2008
I am attempting to get into my Dell Dimension 8400. It may be I am having problems due to the SP3 update but I cannot get in to see if it is there and uninstall it. (It started going to the blue screen and I cannot do anything from any of the safe mode screens...they are just black with "safemode" in all 4 corners.) I have read up on the SP3 problems on the microsoft forums and found instruction on how to take care of it. It starts with the Recovery Console and the XPCD.
I get in there and it goes directly to "Setup loading files". When it tries to start windows I get this message: Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to our computer, and that any disk related hardware configuration is correct. This may involve running a manufacturer supplied diagnostic or set up program. Setup cannot continue. To quit
View 14 Replies
View Related
Oct 29, 2008
startup says: 1 Logical Drives found on the host adapter. 1 Logical Drive(s) handled by BIOS This computer previously had Microsoft Small Business Server 2000 installed on it, but by the time I received it, someone had replaced the OS with Ubantu.
Dell PowerEdge 1600SC
Intel Xeon 2.4GHz
2 x 36Gb HDD
1Gb RAM
View 2 Replies
View Related
Feb 13, 2007
I have a Dell PC. I installed a copy of Windows Vista on it. I don't like it, so I am trying to reinstall XP Home. When I click on the cd drive the XP Home CD is in, it brings up the menu, but the "Install Windows XP" option is grayed out. I try to boot from the disk, but when it is done loading all the things and I tell it I do not want to repair, but to install, it says "setup did not find any hard disk drives installed on your computer" and makes me reboot my computer. Vista still works fine, I know the Hard Drive is working
View 18 Replies
View Related
May 19, 2008
I just tried to reformat and install windows XP home edition, and upon coming to the screen of "Repair" or "Install fresh copy" I received an error reporting:Setup did not find any hard disk drives installed in your computer.Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.Setup cannot continue. To quit setup, press F3.I was trying to use ubuntu but my ram wasn't high enough, so now it won't let me run windows xp again.
View 16 Replies
View Related
Dec 13, 2005
I have a major problem with my Packard Bell iMedia D815AW home desktop. Ever since I installed a Lite-On DVD-RW into it, it started making a lot of noise (a bit like the sound of a typewriter tapping) and started crashing. I removed the DVD-RW drive, only for the problem to continue. The computer kept crashing (often showing the blue crash screen, other times showing a black 'insert floppy disk' screen, sometimes just restarting itself). Running the Windows disk check utility at start-up would not work - the computer would freeze while the disk scan occured (I tried many times). I ran disk registery programs (ie- Registry Mechanic, etc), anti-virus software, defragmentation, etc. etc. but the problem remained. Yesterday, I decided I would try reinstalling (or restoring?) Windows XP again (with the intention of fixing the problem without deleting my personal files on the computer). However, upon instertion of the disk, Windows XP claimed it could not reinstall, as the Windows version on my computer was too recent. I assumed that the reason for this was that I had installed Windows XP Serice Pack 2 and so the version was too recent for the installation disk. So, I thought I would uninstall service pack 2 and then try to reinstall Windows XP. However, while uninstalling service pack 2, the computer crashed. Since then, whenever I try to startup Windows, the computer restarts after about 30 seconds of loading. I can enter the startup screen which gives you access to entering through Safe Mode, Debugging, etc - however entering through these modes has the same problem though with the computer restarting before reaching Windows. So, I entered the computer BIOS at startup and changed it to load via CD, inserting the Windows XP disk. I tried to use the 'Recovery Console' option, however the error message "Setup did not find any hard disk drives installed in your computer" showed. It then asked me to restart the computer by hitting F3. I then tried to use the Windows install option by restarting the computer and loading the Windows XP disk, but the same "Setup did not find any hard disk drives installed in your computer" message showed. So, i cant load the computer, nor reinstall the software. I dont want to lose all the files on my computer.
View 9 Replies
View Related
Dec 9, 2006
I'm going crazy with this issue and I cannot find any possible solutions. I hope someone in here can help me somehow.Let me explain what's my situation. I have a SATA drive (WD 160GB) I had Windows XP installed on my machine until yesterday that I decided to try a beta version of Vista. Now, I want to get rid of Windows Vista and install XP again. However, when I insert my CD to boot, after it loads all the files,etc...It shows me this message Quote: Setup did not find any hard disk drives installed in your computer.
Quote :Make sure any hard drives are powered on properly connected to your computer,and that any disk-related hardware configuration is correct.This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3.
View 10 Replies
View Related
Jul 2, 2008
i have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
View 5 Replies
View Related
Sep 28, 2005
computer's running a lil bit slow and wont allow me to install my new mobile phone software as c drive memory is full, i've tried my best to move things to the d drive hard disk but its still really full.is there any safe way of transferring most of the programs and files over to the second hard drive?
View 9 Replies
View Related
Jun 19, 2005
What is the best way to get more space on my C drive? Merge C & D drives to optomize space? and how can that be done
View 3 Replies
View Related
Feb 27, 2010
I want to install Windows XP on a new SATA HDD drive. The computer in question came with Windows Vista installed. There is no IDE option in the BIOS. There is no floppy drive on the unit. So it looks like I might have to slipstream all the drivers, etc., on to the unit (which I have no clue how to do). I do not have the motherboard make or model number, nor do I have the motherboard CD. My business partner is trying to take the cover off the laptop as we speak, but we're having trouble getting it off. Thus, as of now, we can't identify the motherboard manufacturer or the serial number.
Can anyone here point us in the right direction? The computer in question is a Compaq Presario c769us (laptop). It was purchased in June 2008. This all started when my business partner decided to use a Vista System Recovery CD to overwrite the existing copy of Vista that he had on the computer. After he ran the disk, the system stopped working. So right now, we have the old hard drive, which contains a non-working copy of Vista on it (which we can 't delete), and we have the new hard drive (a 250 GB Hitachi). So maybe we could just delete the copy of Vista on the old hard drive - the self drive test checked out okay on the old hard drive. So I guess the two options are - figure out a way to put XP on the NEW hard drive, or figure out a way to put XP on the OLD hard drive and delete Vista from it first. If we can put XP on the old hard drive and remove Vista from it, we could take the new hard drive back, and get our money back, too.
View 14 Replies
View Related
Apr 20, 2006
I have setup a wireless network between two computers in my office and have installed some software that will automatically backup folders on each of the two computers.It work by backing up certain folders on computer 1 to the hard disk on computer 2 and vice versa.I also have a program installed on both computers that uses the data on computer 1.simplify the process of locating the data on my network I have created virtual drives using the Map Network Drives function in Windows. However; if I start up my computer and open these programs - they can not find the drives, I have to open My Computer first and double click on the drives before the programs will read from them. I am guessing that for some reason Windows is not connecting to these drives, even though I have set them to "reconnect at logon".
View 1 Replies
View Related
Aug 22, 2006
Windows XP home cannot find 2nd hard drive, it does not show up in disk management. It does show up in the bios.At one point it did show up, healthy formatted NTFS drive.I was able to add a fileafter that it was gone.I have one user account, and GUEST account.I checked permissions and set them all to enable.
View 9 Replies
View Related
Sep 5, 2009
I was running windows on an IDE hard drive and bought a new SATA and installed a fresh copy of windows on it, now having a dual boot with the old installation on the IDE. I've been running on the SATA drive for a few months now and I want to remove the IDE drive from my system but when I disconnect it and reboot I get a message that tells me NTLDR is missing so I am assuming that the boot record is on the IDE drive. How can I make the SATA drive my main boot drive?
View 2 Replies
View Related
Jun 28, 2005
I've installed Win XP on a new drive and am now using my old boot drive as a slave, which I will now use for backup. Before I format my old drive and wipe it clean, I would like to copy the files from My Documents on the old drive and save them to my new drive. But I can't find those files on the old drive. Where is the My Documents folder on that drive?
View 5 Replies
View Related
Jul 23, 2006
I recently had Spyware on my computer, after I deleted it and rebooted the error message came up <windows root> system32hal.dll. missing ! I tried to reboot using the recovery console on the windows CD but windows cannot find the Sata hard drive at all So I cant use the CD to reinstall windows over existing windows either I have access to another system, without a floppy drive but not sure what the best method of solving this problem is...Dont want to reformat as I have things on the H/D I need, I know I should have backed up...unfortunately I didnt, wont happen again though, lesson well and truly learned
View 14 Replies
View Related
Feb 27, 2005
I have been searching this site for possible threads relating to my problem, but couldn't find it. I apologize if I am redundant. Windows wont boot suddenly. It had worked fine for a long time till now. It shows the Windows XP logo, but wont show the user names to log in. I tried to boot from the windows XP CD, but when it tries to fix problems, a message appears saying that Windows couldn't find a hard drive. I checked my hard drive and its perfectly connected.
View 3 Replies
View Related
Apr 15, 2007
I decided to reinstall my windows xp formatting hard drive but after it asks me to agree with the license agreements it says windows could not find a hard drive in your computer.windows cannot continue setup press F3 to quit.so can someone tell me how do i resolve the hard drive problem?I have ASRock 775VM8 mobo Western Digital SATA 160 gigs and pentium 4 3.06 ghz.
View 10 Replies
View Related
Jan 3, 2008
I've been trying to install Windows XP on a HP Compaq 6710b. It's my friends laptop, it shipped with Vista and she hates it so I'm giving her one of my copies of XP to use, because I'm so nice and whatnot. It boots into Windows Setup, checks everything, and then tells me that it can't find a hard drive for it to install Windows on, and the only option is to press F3 to restart. Is there some step I'm missing to turn on the hard drive before I install? Is this a problem with HP products, or have I just forgot to press some button?
View 3 Replies
View Related
Oct 8, 2006
I'm can't get WinXP installation to find my Sata Hard-drive. I'm running Suse Linux on my IDE-HD and I could also had no problems getting my Suse 10.1 installation to install on the SATA-HD. I've booted up with winxp media install disk and tried to use the F6 key at the right time but nothing happens so it keeps going until I get to the point where I can press the S key to install SATA RAID driver from disk that came with my motherboard. The drivers install but then windows install still says no disk to install windows... I don't get it.
I've checked my bios and SATA in there, in fact the first thing I see when I boot up in the boot sequence is the SATA drive. Linux knows it's there but windows install doesn't. I installed XP on a WD SATA drive before and all I had to do was press F6 to install the controller from the XP disk but that doesn't work now.
View 7 Replies
View Related
Sep 9, 2007
Cannot reformat it, because it's the only hard drive with my information left on it. The one it came from was totalled and there's no way to back it up.On startup, it recognizes that the hard drive is in. But it doesn't show up on My Computer.
View 14 Replies
View Related
Sep 25, 2007
something really weird is happening to my pc.in my hard drive, with a size is 60 gb, i have a folder, inside my docs, that says that i have 42 gb of things. but when a look inside that folder there is nothing. i saw in each folder inside documents and setings and nothing.i saw in temps folders inside of windows folder and i ran the windows utility to clean up and mantainance of my hard drive and i got nothing as a result.i tried crap cleaner, and its usefull, but the problem persist. i dont have a lot of apps installed or mp3 org jpg, files, so i dont know how to start.
View 6 Replies
View Related
Dec 29, 2008
My brother has a Dell laptop that came pre-loaded with Vista. He asked me to remove it and install XP for him. I've re-installed XP on several computers but I'm stuck here.
When I boot from my XP disk, I press enter to install a new copy of XP, but then it says it cannot find a hard drive and setup cannot continue
View 5 Replies
View Related
Aug 5, 2010
I plugged in my WD passport external hard drive into my USB port on my pc that has a newly installed copy of windows xp professional. The new hardware installer pops up, I chose the auto find drivers. Then it copied over called Initio. After that I got another little window asking to give the location of this missing file ivusbWxp86.sys.
View 11 Replies
View Related
Apr 9, 2005
my system crashed for no reason. when i started it back up, it was in dos with the menu of 4 boot options. hard drive, cd rom etc.. it wont boot from hard drive so i put the windows disc in and tried to boot from it. it tried to setup but it said it cant find a hard drive and to exit setup.
View 14 Replies
View Related
Jun 27, 2005
my cd rw drive has no power to it at all, i have tried all the help solutions in the packard bee info center but nothing works. the drive is recognised by the computer when you click on the device properties and ry to trouble shoot, it also says there are no problems with the device, however if i try to access the drive via any form eg via my cd rewriting program it claims a stutiable drive can not be found! also if you try and open the cd draw
View 4 Replies
View Related
Sep 25, 2005
How do I find my processor speed, RAM, and hard drive speed/configuration?
View 3 Replies
View Related
Jan 1, 2006
I want to convert my two hard disks on my laptop to NTFS for the obvious benefits. I found this page on the microsoft website HTML.I just don't know where to find the volume labels of the drives.
View 14 Replies
View Related
Jun 5, 2007
I recently upgraded my operating system to 'Windows XP Professional' and I am happy with the outcome, with one exception.Since upgrading I am unable to easily access the 'my computer' facility.The symptoms are as follows. I double click the 'my computer' icon and the window opens, however, no drive details appear and I see the 'waggling torch' symbol which indicates that the computer is looking for the drives. Unfortunately this continues for some time ( often up to 5 minutes, and sometimes it will not find the drives at all
View 7 Replies
View Related
