Dimension E520 Will Only Load Windows When Boot Cd Is In CD ROM
Apr 1, 2010
i have a dell dimension e520 with stock everything from dell (P4, 512mb ram) First i had about 70 virus's on the hd, so i removed them when the drive was installed in another machine.So then windows was damaged from the removal, and so i did a clean install (after format), and everything was peachy, (installed windows, ran windows, installed programs etc.) well until i removed the xp installation cd, then it says "boot device not found, press f1 to continue, f2 to reboot". Here is the weird part, when i put the cd back in, reboot, and don't press a key when the " press any key to boot from cd" message comes up it will boot fine. Goes right into windows, etc.In order to reinstall windows, i had to change an option in the bios from raid mode on the sata hd to ATA/autodetect option, because i was getting the bsod 0x0000007b error.The xp cd i used to reinstall was xp sp1 (one of the dell oem ones).I was able to install windows, install all drivers, install sp3 etc.Everything was fine, until i removed the cd and rebooted.I attempted to change the raid option back to original setting in the bios, and reboot- and i got the same message.The bottom line is- everything works fine when i boot with the xp install cd in the cdrom (and do not press a key when it asks to boot from cd). When i boot without the install cd, then acts like there is no os.I have to admit, i have fixed many computers in my day, and this is the first time i have come across this.Could it be something wrong with the sata controller on the motherboard?
View 11 Replies
ADVERTISEMENT
Sep 7, 2005
my wife deleted her configuration for her boot loader and now we cant get her windows to load i have put her hard drive on my computer to try and reformat but i just cant get it to boot from disk dont know what im doing wrong we have windows xp i have partition magic on my disk and tried to add windows on her disk using this but it dosent recognize the disk
View 2 Replies
View Related
Apr 22, 2006
I've got an old Dell Dimension XPS T450 Pent-450 which had Windows Me but I put 2000 in it. Ran fine untill I tried to add memory. I put the memory back the way it was but now I get a window saying "THE LOGON
USER INTERFACE DLL MSGINA DLL FAILED TO LOAD" What do I do to fix this problem?
View 5 Replies
View Related
Apr 12, 2006
First my computer was cutting off in the middle of any program. I decided to delete everything on the drive and reformat it and reload windows xp. While trying to load windows xp it would load the set up but when going to load files it locked up everytime. I tried also loading windows 98, 95 and they too locked up. At one point it said I had a virus in my boot sector and at another time it said I had a virus in my RAM. I got a program called PC Beginner to help partition my drive and redo the MBR. I can partition the drive and format it but windows still doesn't load. Now I wonder if there is a problem with the mother board and I have a dual bios board, I was wonder if there is a program loaded in the dual bios that may somehow causing my problem. If so what can be done to clear the problem? How can I get windows reloaded?
View 2 Replies
View Related
Aug 23, 2009
After putting Dell E520 in sleep mode for a day. upon restart logged in and a desktop came up that looked like a default dell set-up some program icons were there but my desktop image was not. No folders. Nothing I had customized for me was there.It was as if all files and folders I created or saved were deleted with no trace left behind.went into BIOS cked around everything looked o.k then shut down and started up same thing again. After doing this twice Started up again and logging in normally Everything came back up all folders and files , my desktop image everything as I had left it 2 days ago , totally strange.
View 3 Replies
View Related
Dec 17, 2005
I have a Dell Dimension XPS T700r with Windows 98. I cannot run defrag, scandisk, or Norton Systemworks scan of my disk. The error says that drive C is blocked by disk utility.
View 4 Replies
View Related
Apr 21, 2005
I have a Dell Dimension 8200 desktop running WinXP Home however It won't boot to the hard drive. I replaced the drive with a known working one and it still doesn't boot, says Diskette Drive 0 Not Found, however I figured that was referring to the floppy drive. Tried switching the ide cables around and that didn't work either. The power supply is working, as well as all of the fans. Its running a 1700mh processor. Cd-Rom works fine, and I can boot to a CD, I can browse the files if I boot to Knoppix, however it simply won't boot to the Hard Drive. I ran FixMbR and FixBoot in the recovery console, to no avail. Bios is configured properly, and I haven't touched the jumpers. Just to be sure I tried the hard drive in another system, and it wouldn't boot in that one either. Might be the mother board?
View 14 Replies
View Related
Feb 12, 2010
I have a Dell Dimension 2400 1.6ghz 1gb RAM with XP Pro on it for several years now. It has many programs installed on it. I purchased a faster used Dell Dimension 8400 3.6ghz hyperthreading 3gb RAM with XP Pro on it.My question is simple. My Dimension 2400 has an IDE hard drive and the 8400 has SATA. Rather than spend days re-installing and tweaking all of the programs on the 8400 I tried the following. I used Acronis Easy Migrate 7 to Image the IDE hard drive to the SATA hard drive and installed it into the 8400. It would not boot, I tried a repair install, then while booting I get a blue screen stop Error 0x0000007B. What do I have to do to fix this so it will boot?
View 11 Replies
View Related
Jun 8, 2010
i bought this dell demension 4550 used i turn it on it says to hit f12 to reboot i do that and it comes back to the same f12 reboot how do i fix this problem
View 2 Replies
View Related
Apr 24, 2007
I have just run the automatic update on a dell dimension 4550, running WinXP with SP2. After the 'restart to apply' type message the PC is stuck in nan endless re-boot loop.
I have re-installed WinXP and rebooted, that is fine.I have reinstalled SP2 and re booted, that is fine.
The problem occoures only after applying the 72 autoupdates, after SP2 has been installed.
View 2 Replies
View Related
Mar 29, 2008
I get a blue screen when I boot up my Dell Dimension 8400 (XP Home Edition). The message indicates that it is a registry error. I have not added any new hardware or software or any drivers recently. I can not start in safe mode. I have run windows XP home edition setup from the Dell XP installation disc. when I select either enter to setup windows XP or R to repair using the Recovery Console, I do not ger very far before I again get the blue screen message.
View 7 Replies
View Related
Oct 2, 2009
Starting a few days ago my Desktop would freeze at the Dell boot up screen.. Id have to turn it off then back on to get anywhere.. The 1st time this happen I turned it off an back on twice an got through.. I didnt think much of it.. Today I was working on the computer and everything just froze At that very moment the last thing i did was change the screen saver to none.. then it all froze.. This time when booting up it jus kept freezing i didnt think i was going to be able to get through but on pwoer up i heard a beep an got an error saying it was having trouble booting up at checkpoint[Ithr]
View 1 Replies
View Related
Oct 1, 2007
All of a sudden when I start my dell - it does not boot.I just get an amber blinking light on the start up button. Nothing on the monitor.We have had many power outages in my area after which this happens. After a day or so the Dell will boot up. Yesterday I just pressed restart and since then all I am getting is the amber blinking light again on the start up button and nothing on the screen.
View 1 Replies
View Related
Oct 3, 2006
Checking computer for a friend. It is a Pentium 4 2.80GHz running windows xp, bios ver. A01, 512MB memory. They called Dell and were told to take it to a technician, which I am not, and they cannot afford it.When turned on it showed the Dell logo and then asked for a password which they had no idea what it was. It would not do anything at all. After doing a lot of reading on this forum and others I decided to remove the password by changing the jumper on the motherboard that said ctr password for,30 seconds, and then putting it back in place and start the computer again.It then booted to a screen that said " We appologize for the inconvenience but windows did not start successfully. A recent hardware or software change might have caused this. After some more explaining of possible causes it had the options of starting in, Safe Mode, Safe Mode with Command Prompt, Safe Mode with Networking, Last known good configeration, Start Windows normally. Use the up and down arrows to highlight your choice.When I do highlight any one of the choices and hit enter the computer stops responding at all.
I can now get in and check the system info etc. It showed no password. It also shows no cdrom installed and it has a cdrom and dvd. It only shows the hard drive and floppy drive. The hard drive is a Segate Barracuda 7200.7 80 Gbytes.I ran the diagnostics that are on the computer and everything checked out except the Read Test on the hard drive. It said IDE Disk Error Code 0F00.0244 Msg Block 77765935. Uncorrectable data error or media is write protected.I then tried to run a virus check from Fix-It Utilities on floppy. After the second disc it stopped and said it was unable to read drive c to restore boot area.Did I do something to the hard drive by removing the password and is there any way to check the hard drive for a virus? I don't understand why Dell told them to take it to a tech.
View 6 Replies
View Related
Oct 19, 2007
Transferred all information from Dimension (Dell) to Dell XPS 410. Both computers using XP program. When I start to use my Picasa program I have a continual pop up that says " The DLL "cpuinf32.dll" can not be loaded. OS reports: The specifdied module could not be fouind. Am no computeer whiz--so this is all "Greek" to me. What should I do to correct this?
View 2 Replies
View Related
Jun 13, 2010
I left a MICROSOFT WORD CD in the player and shutdown, the next day I turn on the computer and the CD started up, and it has gone to black screen with cursor each time I start it now. I get 2 choices, F2 or F12. The 4 code lights on the back panel are all green indicating no problems, what can I try?
View 1 Replies
View Related
Dec 27, 2005
shuting down the wrong way I guess and now i try to start my kids computer and it won't load windows at all...it did have windows 2000 xp but now when i turn the computer on it just says windows cannot be found, what in the world did he do to it, and how can i fix it.just to let you know I had the PC built and mailed to me, so I don't have a windows cd to reinstall, and can't seem to find one from anyone, if in fact I need to reinstall
View 2 Replies
View Related
Sep 13, 2010
I have a laptop with Window 7 core i3 RAM 4 gb and 500 gb hard disk with 1 gb grafics card. Can i load Window XP in it.
View 1 Replies
View Related
Feb 13, 2006
on my laptop loads but when push ok for it to start and it comes to the where the icons would be on the desk top and the taskbar that dont show and cant do anything and it says mcafee visus scan there is a vircus but cant scan it if nothing comes up and this laptop is a dell.
View 13 Replies
View Related
Jun 29, 2006
Is there a way to somehow load the windows updates to a disk and then install them on a different computer?
View 6 Replies
View Related
May 11, 2005
I purchased a used HP 8575c, Pentium III. History: original OS Windows 98 SE, previous owner installed Windows XP Pro, then computer would not "see" CD-rom or DVD-rom. He admitted to using a "Windows XP activation crack" to bypass registration of XP. He sold me the computer, and I was able to activate the CD-rom & DVD-rom by eliminating the "upperlimit" and "lowerlimit" HKEY settings. I wanted to install Windows 98 SE (my favorite system). I was able to load Windows 98 SE, but lost the CD and DVD again. And this time, there was no "upperlimit" or "lowerlimit" keys available. I decided to load my own Windows XP Pro (legitimate CD with key), but couldn't load it because of no CD capabilities.
I was advised to use a Killdisk floppy to wipe the HD, download the 6 Windows XP boot disks, which would load the needed drivers for the CD and DVD, and I could then load XP normally from the CD. I wiped the hard drive, inserted the 1st XP boot disk, no problem, it then called for disk 2, then this message appeared: file tkrnlmp.exe could not be loaded, error code is 7, setup cannot continue. I can get into bios where I restored defaults, but no change. The windows help site suggested hitting the F7 key when it calls for F6 about installing RAID, etc, but it didn't work. I don't know where to go from here. At this point the computer is a big paperweight.
View 13 Replies
View Related
Dec 28, 2008
ntldr problem. I used a boot disk to get into windows and it shows all the drives in the right order. windows on c, 2nd drive on d. but it won't boot up. i loaded through a windows disk to try to reinstall windows and it shows that windows is on d; and the other drive is c!!! thats why it cant load on start up. how do i fix this?
View 1 Replies
View Related
Mar 26, 2010
When i install windows,it says windows could not load the installer for disk dr
View 2 Replies
View Related
Apr 22, 2005
when I reboot its extremely slow. Control Alt Delete shows 99% cpu use under processes. Not sure whats going on but been running find for a month at least haven't installed anything odd lately. Have a virus scanner and ad-ware installed.
edit * safe mode it loads fine no slow down.
edit 2 - If I set windows to not load system services in msconfig it fixes the problem. What options does that load?
View 4 Replies
View Related
Dec 22, 2005
It all started when none of my folders would open or "mycomputer" or any "explorer.exe" related things. So I restarted the computer, and after restart the logon screen come on. I tryed to log in but all I got was the "Loadding your personal settings".Then nothing. So Ctrl-Alt-Del the consol comes up. I tried to run explorer.exe manuly but it just blinks on the screen and then disappear.It is almost like something is killing or not letting explorer.exe stay loaded.
View 1 Replies
View Related
Sep 19, 2008
I have just installed new memory,new graphics card geforce 8800gt,new power supply,and new sata hard drive.
I have made a floppy disk from the motherboard cd for installing the drivers during windows instillation from my old pc first.
I switched on new pc to load windows and i get no signal on my monitor also my usb mouse and usb keyboard does not light up,iget power to motherboard and case fans +dvd drive,i have put my windows xp os disc into dvd drive and basically it does nothing.
Do i need to make a windows boot disc or something to start instillation.
I still have windows loaded on my secondary sata hdd but the system32 is corrupt,so i have opted to install new sata hdd,then transfer my files from secondary hdd,once that is done gonna format secondary drive and use it for storage.So i still have the option of entering the bios on my motherboard if i connect it up and disconnect the other drive.
I have left the drive disconnected while i install windows then gonna plug it in after windows installation.
View 4 Replies
View Related
Jan 5, 2005
The computer is slow to load windows 2000. Takes several mintues to connect to the net. Message showing that "Virtual Memory is low". Have gone into "My computer" - then "advanced options" and increased virtual memory to 1500. There is a good amount of space on the disc. But actions made no difference and still get the message that the virtual memory is low. Speed of computer not improved.Will try "System restore".
View 2 Replies
View Related
Mar 12, 2007
i have had problems with my computer for a while. i have windows xp. recently whenever i make any changes to the computer like desktop arrangement and shutdown none of the changes are saved. i tried to rrestore to a previous time when there were no problems but when it booted back up just before it come to the windows screen it says "windows cannot load the locally stored profile. possible causes of this error include insufficient security rights or a corrupt local profile." then "windows cannot find the local profile and is logging you on with a temporary profile."
View 1 Replies
View Related
Jul 3, 2005
I have 2000pro on my computer. I want to boot into 98 to load a map program.installed a 2nd hard drive but with the networking it's still 2000.
View 12 Replies
View Related
Jan 1, 2008
I want to install a new primary hard drive and reinstall windows xp from scratch on the new c: drive. For the moment I would also like to retain the old disc contents and the xp operating system. To try to do this I installed a second hard drive and cloned the old drive c: to the new drive f:. I created a dual boot computer by editing my boot.ini file so I could boot from either the c: or f: drive. I replaced my primary hard drive with a new drive and booted up in the f: drive. Then I cloned the f: drive back to the new c: drive creating a dual boot system. My concern now is that if I reinstall windows xp on the newly installed hard drive, the Dell installation disk will wipe out the operating system and the contents on the f: drive. Is there any way to retain the old system? I'd appreciate any help with this.
View 1 Replies
View Related
Jul 22, 2008
i have 2 sata hard drives and i need to know how to duel boot windows xp home with windows server 2003?
View 7 Replies
View Related
