I am receiving some problem in windows XP. when i connect internet computer goes shutdown automatically after a min or 2.some kind of message appearC:windows Isaac.exe" for safety ur computer will be shutdown..i have installed win xp SP1 yesterday and haven't use internet.
View 6 RepliesI recently bought a hp desktop with windows xp home on it.Anyways everything seems to be good i used the disks and rest it back to factory and i am having a problem with connecting it to the internet. It recognizes the Ethernet cord connected, but it will not connect to the internet.ive tried : resetting the router typing in a manual ip address and all that.I took out the chip and dusted it off and well dusted out all the internals. everything seems to be running fine no reported issues.
View 2 Replies View RelatedDell Inspiron 2500
Microsoft 2002 XP Home Edition
Celeron 897 Mhz Processor
128 MB
20G/7 used
I finally relented and installed service pack 2 recently and my computer has been EXTREMELY sluggish and has frozen up a few times. Currently, two LAN icons appear in the tray at the bottom, one with my DSL connection, the other saying there is no connection
I use a licensed WIN XP Home and am wondering why it takes about two minutes after my wallpaper and icons appear before I can connect to my dsl provider? While waiting for those two minutes, the cursor remains as an hourglass and until I am able to connect to the internet. If I try to connect to the Internet or double click any icon during those two minutes, nothing happens. I do use Zone Alarm with the security settings set to high as well as the Windows firewall enabled.
View 9 Replies View RelatedI am using the Microsoft firewall and Spy Sweeper for MSN, with up-to-date definitions and a recent sweep.Today when I signed in online,the Connection Center had a pop-up and asked if i wanted a security check.It wouldn't take "no" for an answer.When I took the security check the Connection Center said it couldn't find my access numbers, and this prevented me from going online
View 10 Replies View Relatedinstalled dynex dx-pcigb gigabit pci adapter ethernet card in my emachines t1120 computer as it only had a 56k modum adapter.ran enclosed cd for new card. wont connect to internet using internet explorer. tried unplugging router for 3 mins. and retry no connection.tryed uninstalling drivers and the reinstalling still no connection,on bottom of taskbar on the right side it saysaquiring network address,but it never happens.
every time i try to get on the internet on my web site, this comes across the screen RUNDLL Error Loading C:DOCUME~SJH~1.THELOCALS~1 Tempse.dll Access is denied
View 1 Replies View RelatedJust after I log on the internet my screen flashes "ERROR LOADING"C:Program 1MYWEB5~ar 11binMW5.DLL 53707962-6f74-2d53-2644-206d794 2484 F /Support
View 1 Replies View RelatedI was reading some article that claimed a typical unpatched (pre-SP1) Windows XP system is likely to be infected by an exploit within 15 minutes of connecting to the Internet.
Whenever I try to use internet explorer, it will close on its own after a little while, stated that and unexpected error has occured. I have internet explorer 7. When I try to open up various things in my documents or on my external hard drive, the same thing happens. I have deleted things that I no longer use, I have run a malware program twice, and I got a new antivirus program (Symantec) and ran it three times. This has not fixed the problem. I have downloaded Mozilla Firefox, and that works well for the Internet, but I still cant open other windows without them giving me an error and closing shortly after. It is driving me crazy
View 12 Replies View RelatedI need help with the virus sasser. I have tried everything. Every time I connect to the internet it shuts my computer down.
View 8 Replies View Relatedi remote into my XP box everything is fine except when i shut down using a shutdown shortcut and other shutdown utilities no matter what after i get booted off the remote session the computer looks like its shutting down then stays on for a few seconds then a BSOD appear. I have been trying to figure out why for the past week and no solution so im hoping someone can chime in..The problem is only on remote if i shut down locally never a single BSOD and no hardware has changed. No driver issues. ive read and tried all the usual solutions. Need someone here to chime in on specifics.Ive also tried to remote in with bare minimum and no go. same thing.
View 1 Replies View RelatedUsing windows xp-pro, isign on to AOL,and within a few seconds the messege comes up LSA shell(exportversion) encountered a problem and needed to close status code 1073741819 sys 32saaa.exe then the computer shuts off and goes through restart mode. how to fix?
View 1 Replies View Relatedmy IE6 continually shuts down every minute!!! Im using XP home and have included my hijack log below. When it shuts down, I receive the famous "Windows has encountered a problem and needs to close" message. Also, the failed file proccess in the details section of the error box is never the same! I've already run 3 spy & malware programs so I'm pretty sure Im clean.
View 2 Replies View RelatedI am getting a pop up every few minutes. I also have a search bar that has installed in the lower right corner of my screen.
View 6 Replies View RelatedOn my other home desktop, we have begun getting the following message:"This system is shutting down. Please save all work in progress and log off. Any usaved changes will be lost. This shut down was initiated by NT AUTHORITY/System Time remaining: 1:00The system process C:Windows/System 32/services.exe terminated unexpectedly with status code: -1073741819 the system will now shut down and restart."Then it shuts down.
My computer keeps shutting down after less than a minute and gives some type error message,don't recall right now what it said,am not at the computer that is shutting down.What could be the problem? Seems like is says it is shutting down to protect itself or something.
View 1 Replies View RelatedThis is weird. I have to go through the shutdown procedure twice, i.e., Start/Shut Down/Shut Down and click Ok, then Start/Shut Down/Shut Down and click Ok again. It will then shutdown properly. The same thing happens when I try to "Restart." After doing the first shutdown sequence, everything is normal. I can open programs, surf the web, etc. It's as if I never tried to shut it down at all. Only after the second shutdown procedure will it shutdown fully. One note: When I go through the first shutdown sequence, my taskbar pops up and the desktop is darkened. After clicking Ok, the taskbar autohides and my desktop returns to its normal color.I have only had this problem for the last month or two. Before that, all was fine. It's not critical since I can shut it down. It's just annoying to have to do it twice.I have Windows 2000 Pro, SP4, build 5.00.2195.
View 3 Replies View RelatedWhen attempting to "shutdown" or "reboot", I have to do it twice. When I select "Start" then either shutdown or reboot, my desktop will flicker a couple of times, and then nothing appears to happen. I must select "start" again and then either shutdown or reboot and then they will work as expected.
View 7 Replies View RelatedI've only had this problem for the last month or so... during my bootup in winXP, after the blue welcome screen and its little jingle, the computer sits on by desktop background for over a minute before explorer.exe loads.
View 4 Replies View RelatedI have a p4p800-e mobo with realtek ac'97 sound card onboard. A few weeks ago the sound stopped working. I checked the device manager everything looks normal. I tried restoring my computer without success. I reinstalled drivers which did bring my sound back when I restarted but only for a short time (1 min). What can I do to fix this problem?
View 3 Replies View RelatedI recently had a bout with spyware. I ran a full Malwarebytes scan and removed all the items it found. I restarted the computer like I was instructed to do and it booted up fine. explorer.exe shuts down about every minute or so and restarts. There's no error message or anything, just everything on my desktop disappears then re-appears. This only started happening today. It was working fine last night before I got hit with the spyware this morning. What could possibly be causing this and how do I fix it. My computer is basically useless in this condition
View 2 Replies View RelatedIn last few days Windows (XP Pro SP2) Explorer started to hang fo up to a minute or so when trying to open files. Have scanned for viruses (AVG), malware(Windows Defender), cleaned registry (CClean), defragmented hard drive, restored system to earlier point using both Windows system restore and HP Recovery Manager. HP support said only remaining solution is to reinstall Windows.
View 10 Replies View RelatedMy PC seems to be in a 2 minute beep pattern. After the beep I generally lose my mouse for a couple of seconds. I can live with the noise, I can't live with disruption.
I've rebooted and it still beeps. I've turned off the Google desktop, I've uninstalled a stack of applications that should have been gone ages ago. I've even found my 2003 startuplist.exe and run
This computer is an HP/2.8ghz/512ram/service pack 3 system. It use to run nice, now it boot's slow, slow, slow! It takes 10 minutes to get all the icons loaded, then it works ok. In addition to the slow boot, it also hangs at a black screen, I get around it by pressing F1, then it loads ok. Safe mode loads normally about 2 min.
View 10 Replies View RelatedEvery time I startup or restart my computer, my load takes around 20mins ! I have a Compaq Presario V2000. When I power or restart, the screen goes black, everything flashes, then the Compaq screen shows for about a second (guessing is the BIOS because it lets me hit F8 or whatever) but then after that it goes to a black screen with a status bar at the bottom. Slowly the status bar fills up. At around 20 minutes, which the bar is half way, then the computer flashes again and the XP logo shows and loads normally afterwards.
Im having no more problems with XP or anything else except that startup screen. People tell me its the BIOS, others tell me its not recognizing the Hard drive fast enough among other things. My BIOS boot order is basically CD first then HD. I have tried so many things with no success. And its getting to the point that I cant do anything when it comes to updating stuff without having to restart, which takes those 20mins.
I recently changed my power settings so my monitor would go off after 1 minute while running some scans. Now when I try to change that setting to always on or any other setting, my monitor keeps going black after 1 minute of not being used. Any ideas as to how I can change this?
View 2 Replies View RelatedI am trying to install windows xp pro OEM, everything is fine, it accepts my product key, the installion goes well, it gets to the final installation process and it again asks for the 'product ID code', I type it in for the second time at it then says the product id number in invalid. How come it lets me through the first request for my Product ID number and lets me through the whole set up and then refuses my ID number at the last minute? im definately using the correct number.
View 2 Replies View RelatedI have XP with SP2, my computer freezes up after about 15 minutes being idle and I can only get it going again by resetting it.I have run diagnostic programs but there doesn't appear to be any errors.
View 9 Replies View RelatedThe video I just made is 3 minutes 6 seconds long. When I save it (did this five differen't times) it ends at 2 minutes and 14 seconds? Why on earth? How do I fix this problem? This hasn't happened before. This is only my second video on movie maker, but the first time it worked perfectly. What's going on?
View 1 Replies View RelatedIt takes 10 minutes to reboot my computer! 10 minutes later I m cleaning out temp files and cookies and the like, deleting old profiles, cleaning up MSConfig and Defragging AND moving anything that looks important out to his network share.
View 5 Replies View Related