I intalled Stripe RAID array with (2) WD 74GB Raptors which show up as C. I have a 200GB SATA HDD that was used as backup HDD in same system with previous PATA RAID array. With first XP PRO install I was able to import foreign disk with no problems and data on 200Gb was intact when I connected 200GB drive after updating XP. Because of driver problems on installation, I had to reinstall XP PRO and this time had all drives connected throughout installation. XP saw RAID and 200Gb and i installed XP on RAID array. When I try to import foreign dynamic disk this time it gives me an error," The operation did not complete. Check system log." Log : Error source is LDM. I checked and all sevices are running. 200Gb HDD is in BIOS and in device manager.
i created a backup file for my registry, and am trying to restore it due to minor changes i have made, but when i try to import, i get this error message: "cannot import (file name). Not all data was successfully written to the registry. some keys are open by the system or other processes." what does this mean? and how do i fix it?
I thought that I would try Office XP Professional which I have. I also have Office 2003 Professional with which I have backed up the PST file in Outlook and uninstall the whole thing because I wanted to play with Office XP. So I install the XP version with all the toys, open Outlook and proceed to import the PST file and low and behold the PST file from 2003 is not compatible! Not a big deal, I can go back BUT! I would real like to get this to work. I also Downloaded SP3 for Office XP thinking that it would help but no… I also have Incredimail which has my address book and emails from Outlook 2003 so I created a CSV file and tried to import it but it couldn’t import it saying that it came from an unrecognizable source! I don’t get that… Can I get the PST file from Office 2003 to import?
I have an EEE pc here, with only 2gb SSD inside, and running windows! (Yes i really would be better off selling it on ebay and buy some lego or something) - buuttt, I had a final thought before doing so; to span the volume onto my external drive. However when I try to convert my external 2.5" IDE 40gb HDD, the 'convert to dynamic disk' is grayed out. I don't know what to make of this, and have found nothing much specific enough on google so far.
The drive in question is a dynamic data disk, not my system drive. I had reason to re-install windows onto my system drive. Before I did that I checked to make sure that the data drive, which is formatted as an NTFS drive, and is a dynamic disk, was intact and functioning ok. With XP installed on the system drive I went to look for the data drive in explorer (have done this procedure on many occasions without problems) and could not see the drive. Go to administrative tools and I see a message that says the drive is unreadable.
I have two hard drives in my computer. The first disk contains XP and the software, the second contains personal stuff. The second disk is installed using NTFS dynamic disk. Last weekedend I formated the XP disk, and installed XP again. After installing, the second disk comes up as "unreadable" dynamic disk. Is there a way to make it readable? I haven't done anything to it, so all the data should be there.
short description: I got an unreadable dynamic disk with one volume spanned. configuration:
HDD configuration: (both converted from basic to dynamic)...............
after waking my computer up from screen saver and trying to minimize an internet explorer, everything froze. I restarted it by reset switch, and an "NTLDR missing" message came. I started windows by recovery console and I was able to log on to my windows installation (I did nothing, because i have forgotten how to replace NTLDR!). I checked the connection IDE cable to my primary ATA hard drive (disk 0) and the message didn't appear again. Windows started and just before displaying welcome screen "the blue crash screen" came up and computer restarted automatically. I was not able to read the error message because I saw the blue screen just as a splash! I tried recovery console again and it did not recognize my windows installation. then i tried to install windows again. there were 4 drive available.....
I have been having trouble removing spyware etc from my XP Pro machine, I decided in the end the best thing to do was a complete format. I had recently converted my HD and it's 3 partitions to a dynamic disk, without thinking whilst going through the XP text setup, I clicked delete partition for C: and created a new one, this in turn deleted the dynamic disks, I never clicked format after I had created the new partition and quit the installation. I removed the hard disk and put it in another XP machine, I can see the 3 dynamic volumes using the disk management tool and the all say failed, I cannot get them back online or figure out how to repair them.
After I did a reinstall of windows xp, I could no longer access one of my disks. It is a dynamic disk, and come up as "unreadable" in the disk management tool of windows. after previous reinstalls of xp I seem to recall to get the option to import the disk, but all I get now is the option to change it to a basic disk, which will in turn erase all my data. If anyone could help me with tips on how to access my disk again without losing data, I'd most appreciate it. Or alternatively tell me where I can find a program to pull the data off the disk before I make it basic.
I have with my disk setup. I have 3 dynamic disks which were all working fine until last night when I upgraded my processor and memory. I have fitted an XP 2600 with 333 FSB in place of the 266 version. I also replaced my 512MB of PC2700 with PC3200. I should explain that I did not realise my MB supported the 333 FSB when I bought it. The PC 3200 is purely to give me some leeway for overclocking. Anyway since changing the memory and PSU the PC will not boot at all. I can boot from a floppy or CD but I cannot from the C drive. If I try to restore from a ghost image on another drive I am not given the option to copy to the C drive at all. If I try to re-install Windows or I try to repair the existing installation, I am not given the option to repair at all. I also cannot get into recovery console
Win 7 Ultimate PC Win 7 Home Premium Laptop Win Vista Home Basic Laptop Win XP Home Laptop 2 Win XP PCs
There are also ipods etc that connect from time to time. On the Windows 7 PC I have 2 500GB WD Sata Drives. I would like to use the disk mirroring facility on Win 7 but I understand I would have to make the drives dynamic drives. If I do this to setup mirroring will the other systems be able to access the dynamic drive I have created.( They are all sharing the partitions already in use on the first drive, the second drive is currently blank).
When trying to install east asian languages (Chinese, Japanese,etc) I get a prompt that reads "The file 'xjis.nls' on Windows XP Home Edition CD-ROM is needed."But placing the XP Home CD-ROM in the drive doesn't do anything. The drive runs for a few seconds and the same prompt reappears.Has anyone experienced this? Can anyone offer help or a solution?
What's the best way to import folders (e-mail in Outlook Express) from one machine to another(not networked)? I have copied the whole Outlook Express folder onto a CD from the old machine but am having difficulty in importing sub-folders etc. to the new machine.I have a series of additional folders under Local Folders on my old system that I would like to transfer to my new system.
Let's say I'm checking out one of the many motorcycle forums I enjoy. I'm discussing something & I want to incorporate a web address thaat they can just click on. How do I do this? The cut & paste feature doesn't work. Do I need to change some setting on my computer?Why can't I import a picture from my documents either?
I tried to import my registry that i exported but it just won't let me I tried it in safe mode and it still had the same error.I reinstalled ep cuz i couldn't get it to reboot and nowI have no restore point so i need some help!!Oh since i did the reinstall its so slow to boot it seems like forever.I installed service pack 2 and that's when i started to have some problems.I have a good reg export on another hard drive that i could access but i don't know where to put it if this is a possiblity.here's the error can't import c:documents and settingmikemy documents1106 reg . some keys are open by system or other processes.
What is the exact procedure when importing your "Favorites", from Internet Explorer 6, (Which are on a disk) to a new IE 6 Browser. I cannot seem to get the right path so as they can be imported to this new browser.OS Home SP 2.
I have exported a chart of accounts to an Excel spread sheet. I wanted to create a unique folder based on each line item in excel. Is it possible to export each line from excel to create a unique folder with that name?
How To Import My Music Folder To Windows Media,or Nero Burn.I Have This Folder That Has All Mp3 Music In It, And I Have Burned Music Before,but! On The One I Just Burned I Put The Disc In The Dvd Player,and It Just Shows Me The Track #s. The Disc I Burned Before Had The Track #, Title And Song. My Question Is.. How Do I Format.Or Import The Whole Folder To My Burner.(windows Media Player).I Would Like To Use Nero Burner. Do I Open The My Music Folder,And Slide The Track Over To The Burn Unit? Or Slide Over The Whole Folder? The Folder Has Only 10 Songs I Want To Burn. I Am Ilitterate To The Computer,so! I Don't Know How To Do These
I keep my OS and data on separate drives, so all of my emails are still there, my account settings and address book should be as well. Importing everything into the new install of Firefox was a piece of cake. Everything, even the last sites I had open, imported without any issues. Outlook Express is proving more ... annoying. Microsoft's support site explains how to create new profiles, switch between those new profiles... none of which I need to do. I need to import my old Identity, from my data drive, into Outlook Express 6. I don't mean import the messages (there's not even room for them on the new partition), I just need to link the existing identity on the data drive to the new XP / Outlook Express installation.
I am running a home network with multiple Windows XP machines attached to the Internet with a Linksys router with the DHCP function turned on. Is it possible to have one of my machines use a static IP address instead of the one leased by the router. I know how to setup a static ip address, and I am using a number in the same subnet mask but I can't get access to the Internet.
In reading this disk as I have lot of useful data on it. I don't want to convert it into basic type as it will destroy the data. Will it solve my problem if I convert disk 0 - the 40 GB disk (system disk) also into dynamic type with NTFS file system (using Administrative Tools>Computer Management>Disk Management) ?
I have a trial version 2003 server and have installed it at home. I use Active Directory. When making a DNS server, I pointed my workstation to the server for its DNS, this worked for about 10 minutes. As per Comcast rules about not being able to have a static IP address for the server. How to make a dynamic IP and when it changes just go in and change my workstations to the new DNS which would be the servers new IP?
I would like to make a dynamic inventory of all of the programs installed on a number of computers...Basically I want to be able to open up a database, click on the computername, and it will tell me what programs are installed on that computer...maybe the database could be updated every night or something...This will save me a lot of bookkeeping and also help me to know which systems have old versions of applications, make it easier for licence expiration and new license keys
Since I removed a crapload of spyware using spyware doctor, I get the following message everytime windows starts up "Error loading 0wao0o9s.dll, the specified module could not be found" I'm not really able to find any info on this file.
I have Windows 2000 SP4 installed in my computer. I am getting this error "The dynamic library MSVCP60.dll could not be found in the specified path" This is happening only when i am trying to use some .exe files.
I have been able to able my last problem where my computer was always rebooting, but now that this is fixed. I have ran in yet another problem... a BIG problem. My 300 GB Maxxtor Hard Drive now lists as Dynamic Unreadable... I am now trying to find a way to recover my files... I am running a PC Inspector File Recovery Scan and then will be a recovermyfiles Scan. Was wondering if anyone has other ideas to fix this/get the files.
every time i log on or **** down my pc I get this mesage. Procedure entry point get process image file name W could not be located in dynamic link library PSAI.DLL and also Runner file Name(kodak software adapter.exe) lacksa'_' (the app id seperator)does anyone know how to get rid of these error messages.
