I have been having trouble removing spyware etc from my XP Pro machine, I decided in the end the best thing to do was a complete format. I had recently converted my HD and it's 3 partitions to a dynamic disk, without thinking whilst going through the XP text setup, I clicked delete partition for C: and created a new one, this in turn deleted the dynamic disks, I never clicked format after I had created the new partition and quit the installation. I removed the hard disk and put it in another XP machine, I can see the 3 dynamic volumes using the disk management tool and the all say failed, I cannot get them back online or figure out how to repair them.
I have with my disk setup. I have 3 dynamic disks which were all working fine until last night when I upgraded my processor and memory. I have fitted an XP 2600 with 333 FSB in place of the 266 version. I also replaced my 512MB of PC2700 with PC3200. I should explain that I did not realise my MB supported the 333 FSB when I bought it. The PC 3200 is purely to give me some leeway for overclocking. Anyway since changing the memory and PSU the PC will not boot at all. I can boot from a floppy or CD but I cannot from the C drive. If I try to restore from a ghost image on another drive I am not given the option to copy to the C drive at all. If I try to re-install Windows or I try to repair the existing installation, I am not given the option to repair at all. I also cannot get into recovery console
My XP Home recovery disk will not install or repair anymore (the last few days I did have it up and running - but after trying to install SP2 it's crashing again). So my final chance to get this system back up and running is to try and install a "retail version" XP Pro to a new hard drive.
Can you perform a 'full installation' from a product that is listed as "upgrade" I found what I feel is a good deal on eBay - the blurb states that you can (boot from CD drive) and then when promted just insert your original XP Home or WIN98 disk which sorts out the "key problem". I have listed what this Power Seller says - I have also emailed previous buyers who say it's a great product - legal etc. But these buyers had installed over a working copy of Windows 2000 and XP Home....
I have an EEE pc here, with only 2gb SSD inside, and running windows! (Yes i really would be better off selling it on ebay and buy some lego or something) - buuttt, I had a final thought before doing so; to span the volume onto my external drive. However when I try to convert my external 2.5" IDE 40gb HDD, the 'convert to dynamic disk' is grayed out. I don't know what to make of this, and have found nothing much specific enough on google so far.
The drive in question is a dynamic data disk, not my system drive. I had reason to re-install windows onto my system drive. Before I did that I checked to make sure that the data drive, which is formatted as an NTFS drive, and is a dynamic disk, was intact and functioning ok. With XP installed on the system drive I went to look for the data drive in explorer (have done this procedure on many occasions without problems) and could not see the drive. Go to administrative tools and I see a message that says the drive is unreadable.
I have two hard drives in my computer. The first disk contains XP and the software, the second contains personal stuff. The second disk is installed using NTFS dynamic disk. Last weekedend I formated the XP disk, and installed XP again. After installing, the second disk comes up as "unreadable" dynamic disk. Is there a way to make it readable? I haven't done anything to it, so all the data should be there.
short description: I got an unreadable dynamic disk with one volume spanned. configuration:
HDD configuration: (both converted from basic to dynamic)...............
after waking my computer up from screen saver and trying to minimize an internet explorer, everything froze. I restarted it by reset switch, and an "NTLDR missing" message came. I started windows by recovery console and I was able to log on to my windows installation (I did nothing, because i have forgotten how to replace NTLDR!). I checked the connection IDE cable to my primary ATA hard drive (disk 0) and the message didn't appear again. Windows started and just before displaying welcome screen "the blue crash screen" came up and computer restarted automatically. I was not able to read the error message because I saw the blue screen just as a splash! I tried recovery console again and it did not recognize my windows installation. then i tried to install windows again. there were 4 drive available.....
After I did a reinstall of windows xp, I could no longer access one of my disks. It is a dynamic disk, and come up as "unreadable" in the disk management tool of windows. after previous reinstalls of xp I seem to recall to get the option to import the disk, but all I get now is the option to change it to a basic disk, which will in turn erase all my data. If anyone could help me with tips on how to access my disk again without losing data, I'd most appreciate it. Or alternatively tell me where I can find a program to pull the data off the disk before I make it basic.
I intalled Stripe RAID array with (2) WD 74GB Raptors which show up as C. I have a 200GB SATA HDD that was used as backup HDD in same system with previous PATA RAID array. With first XP PRO install I was able to import foreign disk with no problems and data on 200Gb was intact when I connected 200GB drive after updating XP. Because of driver problems on installation, I had to reinstall XP PRO and this time had all drives connected throughout installation. XP saw RAID and 200Gb and i installed XP on RAID array. When I try to import foreign dynamic disk this time it gives me an error," The operation did not complete. Check system log." Log : Error source is LDM. I checked and all sevices are running. 200Gb HDD is in BIOS and in device manager.
Win 7 Ultimate PC Win 7 Home Premium Laptop Win Vista Home Basic Laptop Win XP Home Laptop 2 Win XP PCs
There are also ipods etc that connect from time to time. On the Windows 7 PC I have 2 500GB WD Sata Drives. I would like to use the disk mirroring facility on Win 7 but I understand I would have to make the drives dynamic drives. If I do this to setup mirroring will the other systems be able to access the dynamic drive I have created.( They are all sharing the partitions already in use on the first drive, the second drive is currently blank).
A few weeks ago I did a scan with a registry repair program. Some how it deleted the certificate for the encrypted files on my external hard drive. Because of this I don't have access to any encrypted files on the drive. I've never intentionally backed up the certificate for this drive.Is there anyway to recover this certificate...without buying some expensive program?
I had a ntfs file partition poo on its self. i moved the disk to another computer and it can see the disk but partition magic only sees it as an "other" partition. is there any way to repair it enough to get some irreplaceable files off of it. or is there a recommended program. i plan to wipe it after that and do a clean install
I asked my local rep for a XP mce sp2 cd, as none came with my machine (recovery partition). He informed me that he could, for a nomonal fee, supply me with such a cd but with a different ket No. on it. I then asked the obvious question: If I use the key on the side of my machine, which I'm sure I must, will that cd then, work for me? He said he was'nt sure and would get back to me. I'm just wondering what are your thoughts on this?
My sister in law called me for help she has a E Machine T1120 with XP Home its 3 or 4 years old.She was trying to clean out unused and old programs and made the mistake of trying to uninstall MS Money and now she's getting error messages.I told her that XP has a repair function but her recovery cd from emachines dosn't seem to give the repair option it has a choice of reinstall with wipe of hard drive or command line.
It all started when I was busy typing out an essay I heard my computer making some weird noise. It's the sort of noise I hear when my computer turns off completely. I decided after hearing it enough times to turn off my computer then turn it back on after a couple of minutes.Upon turning it on it gave me a black screen saying WINDOWSDRIVERSISAPNP.SYS could not be found and to insert the Windows XP CD and to hit 'r' to access recovery console to repair it, fine. I don't have my Dell's Windows XP Media Centre Edition CD (don't even think I got one back in 05) so I got a friend to give me a pirated XP Music Edition, Pirated XP Media Centre, and I even took my cousins LEGIT Windows XP Edition.
I'm trying to repair XP after a virus problem but I keep getting the message: abp480n5.sys is corrupt unable to continueCan I get the file from anywhere? What else can I do? Can I repair XP another way?
Let me preface this by saying I'm a fairly advanced user, a software developer by trade, and I've been digging through google and ms tech support pages trying to find a solution to this. The last time I used this machine it was on SP2. I gave it to my wife well over a year ago and have no idea when or IF SP3 was installed. Of course I don't have the OS disks anymore. She brought it to me yesterday with the dreaded BSOD. I can't be sure what triggered it. Maybe a failed SP3 install, maybe some Chemdraw trial software...I can't be sure.
So I acquired an XP SP3 disc and ran the repair. I got a new BSOD about some missing executable, which I was able to install in the recovery console after entering an empty password. That got me back to my original BSOD so no luck. So my theory is that maybe SP3 is the problem and procede to acquire an XP SP2 disc instead, which happened to be a Dell distribution disc, which was probably a bad idea, but it seemed to work as any other disc would. Now I get a new BSOD telling me I'm missing msvcrt.dll. Which makes sense because EVERY repair that I've done, regardless of disc or service pack, has been unable to copy msvcrt.dll AND msvcp60.dll. Although only after repairing to SP2, do I get the specific BSOD message that this file is missing....
I rebooted, and instead of coming up directly to my desktop, it came up with the log-in screen for the Administrator and me. I selected me, and it came up in safe-mode with the cmd shell. Ok, this is important... I went into msconfig, and safe-mode was NOT selected. So thinking that I needed to do a repair, I inserted my original XP disc and booted into the recovery console. First, I did the normal stuff, like chkdsk and so forth. I also looked at my boot.ini. Everything appeared normal. So I rebooted, same problem.
Went back into the recovery console and did a repair. Everything went along smoothly and guess what! After the first reboot, it gave me the infamous "You are in Safe Mode... you can't do what you are doing in safe mode... you are a bad person and you need to be punished". (Obviously, I'm paraphrasing here). And I'm in the endless reboot cycle. So, I've tried everything (almost) and I would prefer not to do a full re-install. I tried using bootcfg, but this didn't help any since it doesn't say "safe-mode". (Although I did go through the motions). I also deleted my boot.ini and it gave me an error message (no boot.ini, or whatever), and still got stuck in the endless reboot cycle. I also did a fixboot, which didn't help either. And I attempted to do a fixmbr, but I got scared from the "if you do this you are really screwed" message, and didn't proceed.
I have an HP computer that only has the system recovery disc and not the full xp disc. SP2 came with the install. I have an XP disc just with SP1a can I do a repair install with that and then just install SP2 after?
This is an older Dell Dimension desktop pc. It is running a RAID configuration with 2 drives. When I try to do the repair function in the recovery console, the hard drives do not show up in the MAP commmand. Also they are not listed in the Windows setup. However, they do show up in the BIOS, but not available in the boot sequence.I am not that familiar with RAID, are the drives fried or is the system not able to recognize b/c of the RAID?
First off, i have a 60gb ide drive for my windows installation (3 other drives for storage), and i got a 150gb Raptor X, which is sata. I cloned the 60gb boot drive onto the raptor, but it didnt boot, and said the HAL was corrupt. My guess would be that the hardware abstraction layer got all defunct when it saw the new sata drive, but was expecting an ide? After all that, i decided to run a chkdsk on the ide drive, and clone it again, to see if it booted. I used the recovery console on a windows xp pro disc, but alas, i couldnt chkdsk because i forgot my admin password. Stupid me.
Pentium III, XP Pro machine: Recently did 2 clean re-installs (due to malware problems),& was working fine. Then ran rkill & Malwarebytes to get rid of Antivirus 7. Seemed OK after that. Then installed & ran TweakNow Power Pack (registry clean), Smart Defrag(deep optimization) & Revo Uninstaller. The machine began to slow down after using these utilities (I DO NOT know if they were the cause, or if it was just coincidence). Then ran Malwarebytes again, then Avast, found 50+ malware items.The machine keeps getting slower, it's now almost unusable. It boots, but incredibly sluggish, Internet Explorer takes forever to connect, constantly "hangs" for very long periods, HDD almost always churning.I'm thinking that maybe one of the utilities deleted some files needed by the os, maybe a repair install the thing to try. I cannot find this "Free XP Repair Disk Download" that is supposed to be available at the MS XP download site.
In a little bit of a situation. My laptop is not loading up, after about 20secs it states "Disk read error occurred- CLT+ALT+DEL to restart.But it just happend again and again. I've been reading around and everyone is saying just use the xp install disk to repair the master boot, problem is I have moved that many time is the past 2years I have no idea where that CD is.I've downloaded DiskInternals Boot CD and it will start on this. But it wont actaully repair the disk, just scan it I've used diskcheck via cmd on the boot cd but it states there is a master boot registry failure.
Can someone please tell me if I can use a Windows XP Professional disk to repair a Windows XP Home Edition unmountable boot volume? My sister-in-law's Dell Dimension 8400 is getting that error when she starts the PC. She can't locate the disks that came with the PC and I only have an XP Pro disk. I repaired my laptop using recovery console about a year ago but that is XP Pro also.
When I boot my computer, it tells me it can't load windows because the following file is missing or corrupt:<windows root>system32hal.dllCan i use the "repair console" to copy this file onto the hard drive from a floppy disk? If not, how do I rectify this problem?
I want to reformat my hard drive but my computer of 2 years only came with a recovery disc. Do I have to purchase winxp to install the os? i need to purchase recovery disc where n how i proceed?
All you need is a laptop or a pc with hal.dll error and another laptop or cpu running any other os....ok here we go all you need is a usb or flash drive 256 mb and sometimes mabee smaller.. now download slax 6.1.1 ( small stripped down version of linux capable of booting fully from usb) just extract it to the usb drive and run the bootinst file ( if using vista u need to go to cmd first then type the usb drive (ex.. d: ) then enter then type boot cd enter then bootinst.bat .....once the file opens continue with instructions and your almost there... Now put the usb into the pc or laptop with hal.dll error ..... when boot menu is up type watever it says (like hit the f key for boot order or boot menue or something) when u hit the f key then change boot order to usb hard drive to the 1 slot and save and exit....now onlmost there just start the computer and let slax boot this will take a few minutes and if the letters on the screene stop just wait it out for a couple of minutes.
i have 2 computers both gateways.one is a e-4200 xp home edition and the other is a 819 gm xp media center. i took the recovery disk from the media center and put it on my e-4200 computer thinking it would speed it up. well i was wrong. and now i want to take it off and i don't no how .i have been working on it for 2 days and i am still at the same spot where i was when i started. does any one no what i can do to resolve this probleam. i do not have the recovery disk for the e-4200 computer to restore it back .
Purchased a Presario SR1220nx two months ago. It came with a 'System Recovery Disk".(SRD) Is this all I would need incase of a complete software problem to get back in operation again or should I be copying some additional OS files to a CD ? What are the disadvantages of the SRD and the advantages of having the WinXP software ? Seems to me that the SRD is all that I need in case of a failure?
