In reading this disk as I have lot of useful data on it. I don't want to convert it into basic type as it will destroy the data. Will it solve my problem if I convert disk 0 - the 40 GB disk (system disk) also into dynamic type with NTFS file system (using Administrative Tools>Computer Management>Disk Management) ?
View 8 RepliesA little over a year ago I purchased a used IBM Thinkpad laptop from ebay for my wife. It came with Windows 2000 Professional installed and everything worked fine. No CDs or floppies came with the computer. A couple of months later, it was stolen by one of her business associates. It eventually was recovered, but the thief had installed Windows XP along with the OS that was already installed. In trying to remove XP and return the machine to its original state, I somehow managed to eventually not be able to use either OS. As it stands now I have no OS and cannot even access my hard drive.When I boot from a floppy then try to change to C: drive, I get the error message: Invalid media type reading drive c: Abort, Retry, Fail?
View 7 Replies View RelatedI have a network consisting of:
Win 7 Ultimate PC
Win 7 Home Premium Laptop
Win Vista Home Basic Laptop
Win XP Home Laptop
2 Win XP PCs
There are also ipods etc that connect from time to time. On the Windows 7 PC I have 2 500GB WD Sata Drives. I would like to use the disk mirroring facility on Win 7 but I understand I would have to make the drives dynamic drives. If I do this to setup mirroring will the other systems be able to access the dynamic drive I have created.( They are all sharing the partitions already in use on the first drive, the second drive is currently blank).
I have a very strange problem...I have a DVD -/+ RW drive that reads CDs fine but when you try to put in a DVD of any kind it does not recognize it...does not matter whether or not the DVD is a retail movie, DVD -/+ R or RW disc, etc. This problem is not with the drive as this is the 3rd unit I've put in and it has behaved the same way...there is some setting or function within Windows XP that is causing this problem...all 3 of the drives work just fine in other machines. Does anyone know where this type of problem could reside within XP?
View 4 Replies View RelatedLately I have been experiencing a temporary slowdown/freeze and I notice that the hd light is blinking. I can be moving the mouse across the page, for example, when it will start responding erratically or stop. As this is happening the hd light blinks even though nothing is being saved or opened. I have disabled indexing, run virus checks and adware and spyware removal tools. I do have a wireless router attached but i haven't checked to see if it happens with my laptop also.
View 2 Replies View RelatedMy wife's emachines (T3065) pc seems to have officially died. I have the restore CDs in which I have been trying to restore the XP Operating System. Mscdex.exe says it is already running CDR101 says Not ready reading drive R.
View 8 Replies View Relatedupdating the bios settings I recieved from HP concerning my second PC. I have had numerous problems after a repair, and as is the system continues to fail reading the drive. I have tried copying .ini and other files from CD but the boot config is stil off.I have put the HD into my other PC and the data is fine but just unable to get the #2 back up and running. without having to execute it. In other words I cant run it on my #1 PC since it's a different motherboard etc,
View 14 Replies View RelatedI have an EEE pc here, with only 2gb SSD inside, and running windows! (Yes i really would be better off selling it on ebay and buy some lego or something) - buuttt, I had a final thought before doing so; to span the volume onto my external drive. However when I try to convert my external 2.5" IDE 40gb HDD, the 'convert to dynamic disk' is grayed out. I don't know what to make of this, and have found nothing much specific enough on google so far.
View 4 Replies View Relateddynamic & basic storage
View 1 Replies View RelatedI am running a home network with multiple Windows XP machines attached to the Internet with a Linksys router with the DHCP function turned on. Is it possible to have one of my machines use a static IP address instead of the one leased by the router. I know how to setup a static ip address, and I am using a number in the same subnet mask but I can't get access to the Internet.
View 5 Replies View RelatedI have a trial version 2003 server and have installed it at home. I use Active Directory. When making a DNS server, I pointed my workstation to the server for its DNS, this worked for about 10 minutes. As per Comcast rules about not being able to have a static IP address for the server. How to make a dynamic IP and when it changes just go in and change my workstations to the new DNS which would be the servers new IP?
View 9 Replies View RelatedThe drive in question is a dynamic data disk, not my system drive. I had reason to re-install windows onto my system drive. Before I did that I checked to make sure that the data drive, which is formatted as an NTFS drive, and is a dynamic disk, was intact and functioning ok. With XP installed on the system drive I went to look for the data drive in explorer (have done this procedure on many occasions without problems) and could not see the drive. Go to administrative tools and I see a message that says the drive is unreadable.
View 9 Replies View RelatedI have two hard drives in my computer. The first disk contains XP and the software, the second contains personal stuff. The second disk is installed using NTFS dynamic disk. Last weekedend I formated the XP disk, and installed XP again. After installing, the second disk comes up as "unreadable" dynamic disk. Is there a way to make it readable? I haven't done anything to it, so all the data should be there.
View 3 Replies View Relatedshort description: I got an unreadable dynamic disk with one volume spanned. configuration:
HDD configuration: (both converted from basic to dynamic)...............
after waking my computer up from screen saver and trying to minimize an internet explorer, everything froze. I restarted it by reset switch, and an "NTLDR missing" message came. I started windows by recovery console and I was able to log on to my windows installation (I did nothing, because i have forgotten how to replace NTLDR!). I checked the connection IDE cable to my primary ATA hard drive (disk 0) and the message didn't appear again. Windows started and just before displaying welcome screen "the blue crash screen" came up and computer restarted automatically. I was not able to read the error message because I saw the blue screen just as a splash! I tried recovery console again and it did not recognize my windows installation. then i tried to install windows again. there were 4 drive available.....
I have been having trouble removing spyware etc from my XP Pro machine, I decided in the end the best thing to do was a complete format. I had recently converted my HD and it's 3 partitions to a dynamic disk, without thinking whilst going through the XP text setup, I clicked delete partition for C: and created a new one, this in turn deleted the dynamic disks, I never clicked format after I had created the new partition and quit the installation. I removed the hard disk and put it in another XP machine, I can see the 3 dynamic volumes using the disk management tool and the all say failed, I cannot get them back online or figure out how to repair them.
View 1 Replies View RelatedAfter I did a reinstall of windows xp, I could no longer access one of my disks. It is a dynamic disk, and come up as "unreadable" in the disk management tool of windows. after previous reinstalls of xp I seem to recall to get the option to import the disk, but all I get now is the option to change it to a basic disk, which will in turn erase all my data. If anyone could help me with tips on how to access my disk again without losing data, I'd most appreciate it. Or alternatively tell me where I can find a program to pull the data off the disk before I make it basic.
View 1 Replies View RelatedI intalled Stripe RAID array with (2) WD 74GB Raptors which show up as C. I have a 200GB SATA HDD that was used as backup HDD in same system with previous PATA RAID array. With first XP PRO install I was able to import foreign disk with no problems and data on 200Gb was intact when I connected 200GB drive after updating XP. Because of driver problems on installation, I had to reinstall XP PRO and this time had all drives connected throughout installation. XP saw RAID and 200Gb and i installed XP on RAID array. When I try to import foreign dynamic disk this time it gives me an error," The operation did not complete. Check system log." Log : Error source is LDM. I checked and all sevices are running. 200Gb HDD is in BIOS and in device manager.
View 1 Replies View RelatedI would like to make a dynamic inventory of all of the programs installed on a number of computers...Basically I want to be able to open up a database,
click on the computername, and it will tell me what programs are installed on that computer...maybe the database could be updated every night or something...This will save me a lot of bookkeeping and also help me to know which systems have old versions of applications, make it easier for licence
expiration and new license keys
Since I removed a crapload of spyware using spyware doctor, I get the following message everytime windows starts up "Error loading 0wao0o9s.dll, the specified module could not be found" I'm not really able to find any info on this file.
View 8 Replies View RelatedI have Windows 2000 SP4 installed in my computer. I am getting this error "The dynamic library MSVCP60.dll could not be found in the specified path" This is happening only when i am trying to use some .exe files.
View 3 Replies View RelatedI have been able to able my last problem where my computer was always rebooting, but now that this is fixed.
I have ran in yet another problem... a BIG problem. My 300 GB Maxxtor Hard Drive now lists as Dynamic Unreadable... I am now trying to find a way to recover my files... I am running a PC Inspector File Recovery Scan and then will be a recovermyfiles Scan. Was wondering if anyone has other ideas to fix this/get the files.
I have with my disk setup. I have 3 dynamic disks which were all working fine until last night when I upgraded my processor and memory. I have fitted an XP 2600 with 333 FSB in place of the 266 version. I also replaced my 512MB of PC2700 with PC3200. I should explain that I did not realise my MB supported the 333 FSB when I bought it. The PC 3200 is purely to give me some leeway for overclocking. Anyway since changing the memory and PSU the PC will not boot at all. I can boot from a floppy or CD but I cannot from the C drive. If I try to restore from a ghost image on another drive I am not given the option to copy to the C drive at all. If I try to re-install Windows or I try to repair the existing installation, I am not given the option to repair at all. I also cannot get into recovery console
View 5 Replies View Relatedevery time i log on or **** down my pc I get this mesage. Procedure entry point get process image file name W could not be located in dynamic link library PSAI.DLL and also Runner file Name(kodak software adapter.exe) lacksa'_' (the app id seperator)does anyone know how to get rid of these error messages.
View 6 Replies View RelatedWhen I log in I get the following error messages:The user mentioned in the file path on the bottom message is a different user than the one I'm using if that makes a different. I've searched for similar threads and they as for a HiJackThis log.
Logfile of Trend Micro HijackThis v2.0.0 (BETA)Scan saved at 7:14:32 PM, on 4/14/2007Platform: Windows XP SP2 (WinNT 5.01.2600) Boot mode: Normal
ive installed a game called big city adventure but wen i go to run it i get - the ordinal 947 could not be located in the dynamic link library kernel32.dll. ive tried reinstallin the game but still get it, ive even updated my directx n also deleted the game shortcut on desktop n resent it to desktop from the game folder but nothin helps. y am i gettin this error msg n how can i resolve it.
View 3 Replies View RelatedDisk Management describes that on my physical Drive (WD5000AAJB) drive is "Dynamic Unreadable" and doesn't display any info about its contents. The drive is a data disk (not the boot disk) and has an NTFS format. It
hasn't been partitioned at any times. HOW i recovery some data from that disk? I try eg. GetDataBack NTFS and i see that there is right data, but how i recover it with out buy expensive license(~100EUR). Is that ISO imgage only way be cause only file straight copy is not allowed(license), BUT i dont have enough free space my other HDD to make ISO image file!
I installed internet explorer 7. But i didnt like it so i tried going back to internet explorer 6, But then i stated giving me a error like "iertutil.dll is missing" So i googled it.After reading about other people havING the same problem as me, I found out that i can download iertutil.dll from www.down-dll.com and copied it to cwindowssystem32.Before i done this my desktop was gone..But after doing this my desktop have reapperied however im still having a problem. Every time I try to open a program or do somethinG i get this erroe message "The ordinal 56 could not be located in the dynamic link library iertutil.dll". I would be happy to reinstall windows but I have lost the CD.
View 3 Replies View RelatedI recently bought Pink Floyd's, Dark Side of The Moon cd, and it is one of those new SACD "enhanced CDs". The problem is when i put it in my laptop and it didn't read, at all. The cursor has the little CD thing on it when i put it in, but nothing happens. I tried to play it by using the "run" feature on the start menu, a message popped up saying, "this disk is uncompatable with Windows XP". When i go through "My Computer is does not even show a disk being in the drive.
View 1 Replies View RelatedCD-RW and DVD-Rom stopped reading data on my CD's. They see the CD's but don't read the data, the CD's appear not to contain anything. I've posted the particular problem twice on this forum, but got no answer. For users experiencing the same or similar problems, I've now determined the cause... I've got a SAHARA USB 2.0 flash drive that came with a UFD-utility that enables one to configure the drive into a private and public area, enabling you to safeguard critical files. This utility causes this problem. Unfortunately I could thus far not find a solution, apart from uninstalling the utility and making do without this function. The flash drive works fine otherwise, not causing any problems. Only the UFD-utility does. I will see if I can find an update that resolves this problem and I will let SAHARA know about it.
View 18 Replies View RelatedMy outlook is no reading my pst file. It says is has problems and tells me to use the fix tool. Do you know where can I finf it? what's the name of tool file?
View 2 Replies View RelatedI woke up this morning to find something with my internet or windows is really messed up, but only on my computer, none of the others on my network have problems. When I go to a site like msn.com it shows nothing but a bunch of weird code, and on most other sites theres at the top of every page, and sometimes in the middle of pages there will be snippets of this weird code.
View 1 Replies View Related