CD-Rom / CD-RW / DVD-Rom Not Reading Data On CD's
May 16, 2004
CD-RW and DVD-Rom stopped reading data on my CD's. They see the CD's but don't read the data, the CD's appear not to contain anything. I've posted the particular problem twice on this forum, but got no answer. For users experiencing the same or similar problems, I've now determined the cause... I've got a SAHARA USB 2.0 flash drive that came with a UFD-utility that enables one to configure the drive into a private and public area, enabling you to safeguard critical files. This utility causes this problem. Unfortunately I could thus far not find a solution, apart from uninstalling the utility and making do without this function. The flash drive works fine otherwise, not causing any problems. Only the UFD-utility does. I will see if I can find an update that resolves this problem and I will let SAHARA know about it.
View 18 Replies
ADVERTISEMENT
Nov 3, 2006
When I sign into MyCQU & then launch webmail I first get a message come up that says session timed out log in again, which is ridiculous given that I'm only just logging in then. If I click on the red cross to close that message down my webmail will actually show up BUT if I then want to say compose a message I then either get an error page comes up saying - ERROR. The requested URL could not be retrieved
The following error was encountered:
Read Error
The system returned:
(104) Connection reset by peer
An error condition occurred while reading data from the network.........
View 31 Replies
View Related
Dec 31, 2006
I had a bad HDD failure which corrupted part of my WinXP OS with the result that I am unable to boot into Windows. I have reloaded Windows on another HDD and I will be able to recover most of my data from backups. However, there is still some recent data on the bad disk which I am frantic to recover. I am able to find the "Documents and Settings" folder where I believe the "Outlook Express" data is held
I am unable to get into the folder as my username on the computer was passworded (the password is known). Neither am I allowed to copy the folder to my new drive. I cannot access the folder from my new OS even when I password myself with the same username / password. I have attempted to repair the bad drive's copy of Windows but that wasn't successful. I don't want to replace the bad copy with a fresh as this would reformat the drive taking with it the folder I want (and can't copy). Any work on the folder would need to be on the bad drive, it seems. I have run out of ideas.
View 2 Replies
View Related
Jul 10, 2005
Can I install XP on a hard drive which has only one partition with data without destroying the data?
View 2 Replies
View Related
Sep 1, 2005
I recently bought Pink Floyd's, Dark Side of The Moon cd, and it is one of those new SACD "enhanced CDs". The problem is when i put it in my laptop and it didn't read, at all. The cursor has the little CD thing on it when i put it in, but nothing happens. I tried to play it by using the "run" feature on the start menu, a message popped up saying, "this disk is uncompatable with Windows XP". When i go through "My Computer is does not even show a disk being in the drive.
View 1 Replies
View Related
Jul 14, 2010
was unable to save all the data for the file The Data has been lost
View 1 Replies
View Related
Sep 13, 2005
My outlook is no reading my pst file. It says is has problems and tells me to use the fix tool. Do you know where can I finf it? what's the name of tool file?
View 2 Replies
View Related
Aug 17, 2005
In reading this disk as I have lot of useful data on it. I don't want to convert it into basic type as it will destroy the data. Will it solve my problem if I convert disk 0 - the 40 GB disk (system disk) also into dynamic type with NTFS file system (using Administrative Tools>Computer Management>Disk Management) ?
View 8 Replies
View Related
Mar 23, 2008
I woke up this morning to find something with my internet or windows is really messed up, but only on my computer, none of the others on my network have problems. When I go to a site like msn.com it shows nothing but a bunch of weird code, and on most other sites theres at the top of every page, and sometimes in the middle of pages there will be snippets of this weird code.
View 1 Replies
View Related
Oct 14, 2005
Only 2 tweeks were ever done to my OS WinXP SP2, Under "Performance Options" I changed "Visual Effects" to "Adjust for Best Performance", and also I added paging files to drive "C" and "D" setting them on "System Managed Size". My problem is memory/OS related... I've been running this PC with 1 gig [2-512Mb] of dual 266MHz DDR PC2100 DIM CL2.5 of RAM. Recently I started doing a lot of graphics work on very large files and kept running out of memory.
I removed 2-512 Mb boards and replaced with 4 matched, tested, 1 gig boards increasing my PC to 4 gigs. But it seems WinXP w/Service Pack 2 is having a problem seeing and allocating the 4 gigs, because I don't see the entire 4gigs in several places of my PC and I see less then 3gigs in available memory. With "Systems > Performance" running I noticed that when the window pops-up up saying ''insufficient memory'', there is still plenty of gigs of available memory left..............
View 7 Replies
View Related
Sep 3, 2006
Whenever I insert a disc for a game, nothing happens unless I click on the shortcut. This may not sound like much of a problem, but It is if I want to re-install a game. The same thing happens with game demo DVDs. I've tried entering D:setup.exe. into the Run box, as a game instruction manual told me to do, but it comes up with an error message:"D refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disc is properly inserted, or that you are connected to the internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location."In the manual (which happens to be for Freelancer, but that's not important), it says "type D:setup.exe (where D represents your CD-ROM drive)". I don't know whether D is my cd-rom drive or not, how do I find out? Or can I just click "enable autorun" or something similar somewhere, and will this solve the problem? Also, this may or may not be related, recently, the button on my keyboard which closes the disc tray has stopped working, I now have to manually push the tray in (there's no button on the computer).
View 14 Replies
View Related
Jan 15, 2009
I tried to run pro tools one day and it couldn't read the audio fast enough. I tried running the def rag and it wouldn't analyze or def rag. I tried typing in stuff in the command prompt like i had seen on some websites and installing the def rag inf file but that didn't work either and i also tried disk keeper and it didn't start.
View 14 Replies
View Related
Sep 8, 2008
I'm having problems with my HP 6122 printer, trying to print a cover for a family history.The cover contains a small b/w photo in center, a caption of one line and framed with a thin blue line, and the whole page framed with the same blue line on the border.I wanted the photo to be printed in "best" as anything less bring moire to the photo.Every time I have tried to do this, the printer does nothing for a minute or so, then proceeds to print the entire page black. What has happened?I can't afford to waste any more black ink, even when I'm watching so I can stop the printing before the whole page is covered.I usually have 2+ inches before I can see it to turn the Printer off.
View 4 Replies
View Related
Aug 1, 2007
I recently was reinstalling windows xp pro . after the fresh install i tried to connect to the internet nothing happened. went to the device manager and apparently the the PC wasn't reading the ethernet controller. so i went home to the dell support to download the necessary drivers needed. i even called dell to make sure i was doing the right thing. needless to say it still does not work... i opened up the CPU to try and find the actual name of the ethernet card and could not. there was a small metal box where you put the ethernet cable into. i did not see a card, yet i know there is one. sorry if I'm confusing. its a dell 8300 with no service code or service tag on it. i check inside and out
View 14 Replies
View Related
Mar 4, 2007
I have windows XP. suddenly it restarts at any time. just reading an email, no obvious reason for it. I tried to do a virus scan but it shut down before it would run very long. I did winsock xp fix and that didn't fix it. What can I do to fix this?
View 4 Replies
View Related
Feb 18, 2009
I'm having trouble either writing code for or finding a freeware utillity to read the current screen resolution.I need it to be accurate, and I need the resolution to be output in the format: {Friendly Name} {width} {height} {color depth} {refresh rate}I should probably have it list all of this one line each, output to standard output.
View 9 Replies
View Related
Jun 28, 2005
I have a very strange problem...I have a DVD -/+ RW drive that reads CDs fine but when you try to put in a DVD of any kind it does not recognize it...does not matter whether or not the DVD is a retail movie, DVD -/+ R or RW disc, etc. This problem is not with the drive as this is the 3rd unit I've put in and it has behaved the same way...there is some setting or function within Windows XP that is causing this problem...all 3 of the drives work just fine in other machines. Does anyone know where this type of problem could reside within XP?
View 4 Replies
View Related
Dec 8, 2007
I have just received an old laptop from my sister, and had to put a new Hard drive in it as the old one had died. So all going good the Hard drive i could format, then start the installation of windows, until it then begins to state that there are files missing on the disc that it needs for installation. The disc is a legit copy of windows I have purchased and is in good condition with no scratches at all so there is no data missing. further more i installed windows 98 onto it and that was fine... The laptop is not so old as to it wont support XP as it is designed for xp and previously had xp on there.
View 5 Replies
View Related
Jan 20, 2005
I was doing something with task manager today and I saw that it's only reading 780 some mb of physical memory when it should be reading a gig. Is there anything I can do short of taking them out individually and putting them in different slots to test them? I have a 512mb and two 256's.
View 6 Replies
View Related
May 19, 2007
well i'd hate to say this, but, i just un-installed my CD-drivers, and i don't remember what the driver was, what can i do to re-install it, also where can i go
View 14 Replies
View Related
May 16, 2010
I install windows xp, I was missing some drivers so i was able to get what i needed and my computer is running just fine but the wireless network connection is reading in Spanish. I've already gone to the regional settings and made sure it reads English, there is no other part of my computer that i have come across that reads in spanish except this section.
View 14 Replies
View Related
Oct 26, 2009
Originally, the computer had Windows XP but when the operating system failed and I had no disk I tried to install Windows XP Pro using a disk I purchased.
These are the error messages I have been getting:
Windows Setup: Unknown Disk - there is no disk in this drive. A problem has been detected and Windows has shut down to prevent damage to your computer.
Setup did not find any hard disk drives installed
I used a �Boot CD� and got the following information:
Using fdisk - "No fixed disc present"
View 3 Replies
View Related
Aug 20, 2008
I'm trying to reinstall Windows XP, I have an HP desktop and no CD so I'm using my i386 folder but I keep getting the error message, "error reading information from netmap.inf". I had a pervious error message about missing the wintupg/netupgrd.dll file and I found the file and created a folder put it in now I get this error message.
View 6 Replies
View Related
Aug 4, 2005
Lately I have been experiencing a temporary slowdown/freeze and I notice that the hd light is blinking. I can be moving the mouse across the page, for example, when it will start responding erratically or stop. As this is happening the hd light blinks even though nothing is being saved or opened. I have disabled indexing, run virus checks and adware and spyware removal tools. I do have a wireless router attached but i haven't checked to see if it happens with my laptop also.
View 2 Replies
View Related
Jun 20, 2005
Close internet explorer on XP pro. The instruction at 0x020c3795 referenced memory at 0x01a5ad58 . This memory could not be read . click on OK to terminate the program. when i click ok nothing happens and problem occurs again next time.
View 12 Replies
View Related
Jan 5, 2007
Windows XP Pro Problem began today.farlier today, the PC had booted to a disk reading error, using HDD #1, see below.I put in HDD #2 & life was good. When I had a chance to work on the problem [ disk reading error ] the BSOD & "bad_pool_data" error appeared.0x000000C2 [ 0x00000043, 0xDAE3E000, 0x00000000, 0x00000000 ]I have read http://support.microsoft.com/kb/314492/EN-US/ .The solution described is "Greek to me".The same problem appeared on HDD #2, so I thought I had bad ram.
I tested the ram; swapped it out AND ran diags.
View 11 Replies
View Related
Aug 19, 2009
I am reading about v7 and how great it is. I checked my version and it's 3.5. Is this adequate or is it antiquated?
View 14 Replies
View Related
Sep 26, 2006
i have a hard disk that has been recently affected by Win32/Mywife.E@mm virus and all the .doc and xls files have been reduced to 1kb irispective of their initial sizes and when you open the files you get this error; DATA Error [47 0F 94 93 F4 K5] I would like to recover the affected files to their original state, i have searched the internet over and no one seems to have the solution documented currently i am trying to download QuickView Plus (Version 8), i have tried all aplications i can come across, including recover my files, winhex, get data back for ntfs, and r-studio.
View 1 Replies
View Related
Apr 7, 2010
to transfer that data in another pc. But some reason my usb hard disk not working detecting on both pc in this way lost my all data. I want ask you can i recover CUT data from original hard disk? and How?
View 6 Replies
View Related
Sep 2, 2005
Both cd-roms: LG cd-rom & Liteon cdrw have stopped reading disks. Both are plug/play, using xp drivers. They are recognized by explorer,no issues according to the device driver. Both spin up, but won't read disk. In win explorer, selecting the LG cd-rom produces a red X: E: is not accessible,incorrect function The Lite-on did the same thing, until I downloaded/installed the firmware from the mfg. Not it acts like it is at least looking at the disk, but it doesn't see anything. Is there anyway to re-install the xp drivers (remember I can't read a CD)? Do you think I could re-install the xp drivers
View 1 Replies
View Related
Jul 9, 2006
Constantly reads the HD when loading programs. This behavoir wasn't present 7+ months ago I have WXPH.
View 7 Replies
View Related
