Cannot Access System Settings In BIOS

Aug 13, 2005

While in XP I deleted a partiain that had Fedora on it. I was using GRUB to do multi-boot. When I rebooted XP it booted to the GRUB command line. I rebooted and hit F12 to try to get to system settings and after I chose system settings it went right back to the GRUB command line. I rebooted again and hit F2 to get to system settings and it went straight to the GRUB command line again.I'm pretty sure I need to fix my MBR but, I can't change my settings to boot from my CD and I don't have a floppy drive.

View 14 Replies


ADVERTISEMENT

Changed Clock Settings In BIOS : System Re-boots By Itself?

Sep 14, 2005

This all started when my computer was shutting down at random times when I was in windows...at first I thought it was my CPU because it was just shutting down when I was playing games... but I no longer think this because it started shutting down when I was just in windows.Anyway so my friend and I started working on it...we thought it was the mild overclock we put on a few weeks earlier. However, my temps were normal and it passed the stress tests we did on it through the BIOS...So we changed the settings back to stock. No luck.Problem not solved. In fact, now we can't stay in windows for more than a couple seconds before it re-boots.

View 2 Replies View Related

Computer Starts To Bios Screen - Checked BIOS Settings

Apr 7, 2007

When I turn on my computer, it does the bios check, then goes into the bios screen on its own. I have checked all of the bios settings, and see nothing set wrong. The only way I can get itno my xp pro system, is to use "F8" during the bios check, the select my hd from there, then it seems only half of my programs work, and it also seems to be randomly changing the programs that do not work, when I do this.

View 1 Replies View Related

AMI BIOS Plug And Play Settings?

Mar 14, 2008

I would like to understand some of the settings on my AMI BIOS v02.58 plus get suggestions on the recommended settings for my XP Home SP2 system (ASUS P5K3 mobo with INTEL Core 2 Duo E6850/3.0/4MB, RAM 2GB/DDR3/PC3-8500):1. Advanced / PCIPnP / Plug And Play O/S: Settings are NO (default) and YES
NO = Lets the BIOS configure all the devices in the system. YES = Lets the OS configure PnP devices not required for boot if your system has a PnP OS.Should I leave the default NO setting or change it to YES and why?

View 1 Replies View Related

Saving Copy Of Bios Settings

Feb 25, 2008

is there any way i can save or print out my BIOS settings, without writting them all by hand, recently the printer port was turned off, had i known the original settings the remedy would have taken minutes instead of hours, thanking you all in anticipation.

View 2 Replies View Related

Compaq Desktop PC / BIOS Settings Locked?

Dec 6, 2004

I made the huge mistake of deciding to wipe ME and re-load an operating system (XP) onto a Compaq destktop PC (800mhz).To cut a long story short, with the re-formatted hard drive installed (NTFS), upon trying to get the PC to boot from the CD ROM to install XP it will not go any further than telling me that it cannot detect an operating system. It doesn't want to let the bootable CD ROM take over, although you can hear the CD ROM spinning, as if trying initiate a boot-up. I have tried everything - trying different CD ROMs, different ribbon cables, unplugging other hardware etc etc, but it always stops at the aforementioned message. When I go into the BIOS to see if I can alter the settings to force the PC to only boot up from the CD ROM (and try other things), the command (F10) to make changes, or to save the changes and exit will not work. It is as if the feature has been locked to stop anyone altering the BIOS settings. I haven't come across this before.

View 9 Replies View Related

System Failing Before Bios / Occasionally Freezes In Bios

Aug 10, 2006

Got a bit of a problem with my housemates pc.A friend gave him some extra RAM, i checked it out and it was crucial 512mb pc2100 CL2.5, and although it didn't match his exsisting RAM it seemed to me that his mobo would only run the FSB at 200mhz anyway so i went ahead and fitted it.It worked fine I then noticed his system temp was running a little high (60-65 degrees), so i took his heatsink off and cleaned the dust and refitted it with some new thermal compound.I added too much and the temp went up. To nearly 90 degrees.I shut it dwon as i didn't want the cpu to pop, cleaned it off, reapplied less compound and figured this would work fine.Now we have the problem. Most of the time: Power on and nothing happens. No bios, no beeps. Occasionally: Power on, i jump into the bios, the temp looks fine (30-40 degrees) and then it freezes right there in the bios after about 30 seconds to a minute.This sounds like a heat issue, but the last temp reading before freeze is 33 degrees.?I've double and triple checked that the heatsink is on properly and thats fine. I followed the official guide on how much compound to use (a blob the size of an uncooked short grain of rice).

View 5 Replies View Related

Memory Upgrade / Nessessary To Update BIOS Settings

Nov 25, 2008

I have Windows XP OS installed on my HP Pavilion 753n Desktop. I currently have 512MB SDRAM loaded, and want to upgrade with another 512MB. Is it necessary to update my BIOS settings (current BIOS on computer is dated 11 September 2002) prior to upgrading the memory?

View 7 Replies View Related

System BIOS And Video BIOS Shadowed

Aug 18, 2008

I have ibm thinkpad R51 2887 nq2 series .My system has been crashed as it is not starting.The whole system gets hang after showing the first ibm screen. The bios utility setup is not getting opened through access ibm button . In safe mode it shows that system BIOS and video BIOS is not working and it has been shadowed.sometimes the system gets started ,but after one minute ,it stucks and the whole system paused and nothing happens.It may be the virus attack on BIOS and it also changes the time and date configuration of BIOS. so what should i do .And how i can install BIOS driver to the system.

View 1 Replies View Related

No BIOS Access

Mar 1, 2008

I keep trying to access BIOS by tapping F2 or DELETE or F10 but the boot continues like no keys were tapped. Except for that, the computer functioning normally. Can someone tell me how to change it back to normal.

View 14 Replies View Related

Can Not Access Hd Even When Bios See It

Apr 9, 2009

I have a dell workst precision 470 dual xeon, 3gb , 160gb maxtor hd sata 150 with win xp pro.created the floppy with PROBABLY THE RIGHT CONTROLER driver and pressed F6, then it was only one option in the list so i did that then, CONTINUW with an oem cd win xp pro spk 2, then at the WELCOME TO SETUP screen, i selected the "TO SETUP WINDOWS XP now press enter" then i got on the screen this Message: "Setup did not find any hard disk drives installed in your comp. make sure any hard disk drives are powered and properly connected to your computer and that any disk-related hardware configuration is correct this may involve running a manufacturer-supplied diag or setup program.set p cannot continue to quit setyp press F3".I have tested the hd with dell diag. tool and al test pass, i believe has to be that the mate boot record has been corrupted or a virus, the thing is i can not even run R console or the Repair/install cause of the above message, is there any suggestion to add this hd to another computer and be able to check the boot.ini and see what is wrong, this is a hd with only one partition, but the problem i have or the one that was created is cause i had a laptop hd that i could not make boot in the laptop so i took it and added to this comp. to the ide 1 controller and then i ran defrag on it, this one has two part c and d so c was the os and d was for other applications, i ran the defrag on it , then i did not remove from the device manager i just simply turn of the dell machine and Physicly remove the laptop hd, then when i was trying to boot the dell 470, i got the the stop error:"STOP: 0X0000007B(0XBA4EB524,0XC0000034, 0X00000000, 0X00000000)", so i think the Boot.ini file is corrupted, the machine is confused or the sata controller driver got corrupted, i am wondering of any sugestion about modifiying the boot.ini file or FIXMBR how in my case, i don't want to reformat the hd .

View 2 Replies View Related

Can Only Access BIOS

Oct 18, 2007

I dug around some before posting, but I couldn't find anyone having the same problem as me, and I'm hoping this is the most appropriate forum. I apologize for the length, but I wanted to post everything I thought might be pertinent. I was playing Guild Wars when my GeForce 4 Ti4400 died. I got a working Radeon 9700 from a friend (he was using it up until the moment I got it, and I ran AquaMark 3D on it) and ran into only a billion problems. When I performed certain actions involving the online video game Guild Wars, my computer would suddenly reboot with no warning. I adjusted "reboot on error" in the system properties. It no longer rebooted, but instead, I got a solid blue screen (no words, just a blue screen), and I had to hold the power switch down to turn off the system. I suspect that troubleshooting this BSoD problem and putting my system through that repeatedly probably messed up some settings or something. The last thing I did to my computer was install the ATI Catalyst 7.8 display driver only (I was testing out the various driver releases one-by-one to see if any of them fixed my BSoD problem). It installed, asked me if I wanted to restart, I clicked yes, it began restarting, froze at a black screen (not the first time I had that problem since all my video card/Guild Wars problems), I once again held the power switch down to turn it off, waited a few seconds to turn it back on, and since then I have had the error described under the "Current Problem" heading above.

View 3 Replies View Related

Can't Access BIOS

Mar 2, 2005

Hewlett Packard PC. Hangs on start up at HP Logo window so I planned to reformat/reinstall XP Home Edition.
Pressed F1 to get into BIOS and it displays the words..."entering Setup." but it just hangs there never lets me into the BIOS.

View 14 Replies View Related

Cant Access Bios On Laptop

Jan 1, 2010

i cant access bios on my laptop and my laptop wont bootup.

View 2 Replies View Related

Unable To Access BIOS

Jul 6, 2005

I can't seem to be able to get into my System's BIOS, that system being Windows XP Professional. I've tried the Hold Del at startup method, but it doesn't work.Is there an alternate method with which I could use?

View 12 Replies View Related

Won't Boot / Cannot Access Bios

Nov 9, 2009

I have a old Sony VIAO PCV-1112 with Windows XP. I was out of town (so I don't know what the trigger for the issue was) and came back to a black screen that begins with "Award Medallion Bios v 6.0". It also says "Hardware Monitor found an error. Enter power setup menu for details." At the bottom of the screen is shows: Press F1 to continue. F2 to enter setup.
a. Nothing happens when I press F2.
b. When I press F1, the Windows loading screen appears, but it fails to initialize XP and goes to a black screen that says that Windows failed to load...and it lists the prompts to reboot in Safe Mode, Normal Mode, Normal Mode with prompt, Normal Mode with Networking, Last Known Good Config, etc. No matter which mode I choose, it reboots and goes back to the Award Medallion Bios v6.0 message screen.
c. When I press Esc > F8 > F1, I am able to get the boot order to pop up and I selected boot from DVD/CD drive. I've tried putting various iso files on disc into that drive in the hopes of trying to get in to recover data files off the HDD. I tried rebooting with the ISO file in the DVD/CD drive, and nothing happens with any of these: Bit Defender; Kaspersky Rescue; or Avira Rescue. I rebooted with the Knoppix rescue ISO, and it actually initialized the DVD/CD drive for about 30 seconds - showed a black screen with a flashing prompt (couldn't type anything though) and then it went back to the Award Medallion Bios v6.0 message screen. I thought it might be the way I copied the ISO files; since when I copied them on my HP laptop, I got warning messages that not all related information would be copied. So I'm looking for an ISO copy app that might help with that? Unless I'm barking up the wrong tree...?
d. When I put in the Windows Recovery CD in that same drive, it does pull up the recovery GUI - but I don't want to loose my data. So it does recognize that Windows ISO.I'm at a loss on how to get into the VIAO hdd to try to copy down the data files that I need, before restoring Windows XP. Is there a way to connect my laptop to the PC to try to copy down the files? I'm a computer newbie, so I need a walk through on what to do.

View 2 Replies View Related

Failure To Access BIOS Or Safe Mode

Mar 17, 2005

I cannot on starting/restarting Compaq Presario, XP SP2 access either the Bios nor Safe Mode using any of the function keys when CPU is starting up. I have to go to BOOT.INIT to select the Safe Mode and then restart

View 1 Replies View Related

Cannot Access Bios Setup On Dell Dimension

Jan 27, 2010

I am trying to access my system setup , So i can boot from my xp cd .I tried to hit F2 but it just keeps taking me to a black screen wanting my pw . I forgot my Pw and after trying to guess my pw to many times it now just shows a black screen wanting a pw ? How can i get pass this ? I have never seen this before .Need a Pw to get to bios setup?I cant boot from my cd unless i get into the bios setup .

View 3 Replies View Related

Installed A Second Internal Hard Drive / Can't Access Bios

Sep 16, 2006

just installed a second internal hard drive. tried to access bios at start up (to setup hard drive) but system doesn't respond to ANY keyboard keys. system just continues with normal Windows boot-up. once XP is running all functions and software seem fine. no matter how many times I try at "Press Del to enter Setup" nothing works. Jusat before I had this problem, I had a problem with software (which I have removed) that caused my system to lock up. when I rebooted system stopped and offerred reboot options, ea: Safe Mode, but I the arrow keys would not work, system just went directly to Windows boot up.how can I access the bios if system doesn't respond to keyboard?

View 5 Replies View Related

Weird Lines On Screen / Can't Boot Or Access BIOS

Jun 28, 2010

A few days ago strange lines started appearing on my computer screen. It has progressed and I could barely see anything. Then monitor kept going into "power saver" mode and back when I booted Windows in normal mode. I booted Windows in "safe mode". Monitor wasn't shutting off anymore but the screen was barely readable.I managed to save my data on external drive. I put in my Windows installation disk and restarted computer wanting to format the hard disk and reinstall Windows.When I would restart I would see black screen and hear DVD drive spinning but nothing was happening. Now when I restart I see this .This screen just stands there. I cannot access the BIOS, load Windows or boot from CD/DVD. All 3 fans in my comp work fine when computer is on. I tried removing this battery and putting it back later but it didn't help. My computer has 2 gigs RAM, runs Win XP Professional SP2 and this is my motherboard .At this point I have no idea what to do or even what caused this. I was hoping to format and reinstall Windows but I'm unable to boot.

View 3 Replies View Related

Startup Screen Tells To Push F2 / Doesn't Can't Access BIOS

Oct 24, 2007

I'm Currently Dual-booting between Windows XP and Fedora Core 5 on my laptop. I no longer want FC5 so I thought I would format that partition to regain my hard drive space. I thought the easiest way to do that would be to boot from my windows CD, but discovered that my System won't do that anymore (I know it used to, because thats how I installed FC5 in the first place). It won't boot from my FC5 cd's either.So I tried to access the BIOS to see what's going on, but for some reason I can't. The startup screen tells me to push F2 but that doesn't work.

View 9 Replies View Related

Access To Files But Application And Settings Are Corrupted

Sep 25, 2006

CAN ACCESS OLD FILES BUT APPS & SETTINGS ARE CORRUPTED

HELP!! I went to install some VPN software on my desktop (Dell Dimension 2350; Windows XP; P4/2GHz; 1GB RAM) and the next thing you know, my OS won't boot. I think I corrupted my registry (again).

"Missing dll NWGINA.DLL. Either replace or contact your system administrator" is the error message that I gOt on a black screen after all attempts at reboot & startup: boot from Windows XP CD, fiddled around with CMOS a little, made every attempt to boot to Windows XP and came up empty.

View 12 Replies View Related

GPO Settings - Restrict Access To The Standard Games

Sep 7, 2005

Is there a way that you can restrict access to the standard games that come with XP? I have gone in and put them in the list of disallowed applications by the executable name but would prefer a GPO setting to not show the menu at all and disable the games for the corporate network.

View 1 Replies View Related

Access Denied To Docs And Settings Folder For Administrator

Jan 15, 2007

I have a Dell 4600 with with 769MB Ram and Windows XP Pro. My XP boot sequence got corrupted (according to Dell) on my "C" drive. They wanted me to reformat the drive (and lose all my work). Instead I installed XP onto my secondary drive and nenamed it "C", set up a special partition on my secondary drive to receive the old files ("D") and renamed the "bad" drive to "G". Though I can access/copy most files from "G" onto "D", my "Documents and Settings/Administrator" directory on "G" (not password-protected, but contained a lot of files) are all "access-denied". I can't open/view these files on "G" or even copy them to "D". If I try to open them, I get a "files inaccessible, access is denied" msg.

View 3 Replies View Related

System BIOS Shadowed / Video BIOS Shadowed

Feb 26, 2010

i have a problem with my Acer Aspire 4732z. Press <F2> to enter SETUP).i must press anykey twice to load the window(i'm using window xp pro).i think it cause by System BIOS shadowed, i want to disable it..but there is no option.

View 2 Replies View Related

Way To Access Bios Of Computer With Another Computer / Via Direct Link Or Route

Aug 24, 2005

Is there any way to access the bios of a computer with another computer, via a direct link or a router? I am sure that the bios have been affected and attempts to boot from either a floppy or cd get ignored in the loading process and the bios canot find the module to activate the periferal devices ie: keyboard, mouse, usb ports. I am at a total loss of how to do this.

View 8 Replies View Related

Changed BIOS Password: PC Shut Downs & Reboot BIOS Keep Coming?

Aug 14, 2008

once the on button was pushed, it came up with the BIOS screen asking for the password.I removed the CMOS battery, which allowed me to change the Password so I can get onto BIOS now. However, when I boot now it just comes up with the BIOS screen.I set HD to boot first, aswell as setting the clock and date. I then ask it to save and quit, after which it shut's down, and reboots, only, BIOS keeps coming up. And I need to get this sorted asap

View 14 Replies View Related

Repair Bios Installation / Hanging On Parts Of The Bios POST Screen

Oct 21, 2009

I have had windows XP Pro installed, updated and running fine until about a week ago. I was away from home for about a week and left the machine plugged into the mains but powered down. When I returned home to boot up, it kept doing things like constantly hanging on parts of the bios POST screen, eventually booting up after thirty or so complete restarts. It finally booted into windows but after the last shutting down, it will now not boot up at all. I have replaced the bios battery and reset the bios several times.

View 5 Replies View Related

Getting Out Of BIOS System Restarts

Jul 6, 2007

Brief explanation. I purchased a generic brand laptop and loading xp myself. I had no problems whatsoever until I bought the game Medival II. While I was playing the game, as I had before, it suddenly froze my laptop. I was forced to turn off the power and restart. When I did that, I was able to see the bios screen and enter bios which still seems to recognize everything correctly in the laptop. But when getting out of BIOS system restarts. Just a black screen. I finally got to the point that I decided just to reinstall. Upon attempting to do so, I get the following error message after it attempts to load

View 3 Replies View Related

Can't Get Into System Setup (BIOS)

Apr 4, 2007

Running a Dell XPS710. Was on the phone with tech support and had to go into setup to check on something. after I got off the phone, I rebooted and tried to access setup and can not. I don't know if I accidentally checked off something that won't allow me to use the keyboard until the machine boots into windows because pressing F2 (Setup) or F12 (Boot Options) when the Dell splash screen appears won't work. It just goes into Windows.

View 2 Replies View Related

Setting System Clock In Bios

Mar 30, 2006

I've recently installed WinXP on an older Compaq (P2, 350mhz, 256mb ram). Yes I know its supposedly under the minimum requirements. But believe it or not it runs pretty good. My problem is that I want to change the system clock but cant find the system clock setting in the Bios. how to change the system clock on an older Compaq like this?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved