I keep trying to access BIOS by tapping F2 or DELETE or F10 but the boot continues like no keys were tapped. Except for that, the computer functioning normally. Can someone tell me how to change it back to normal.
View 14 Replies
I have a dell workst precision 470 dual xeon, 3gb , 160gb maxtor hd sata 150 with win xp pro.created the floppy with PROBABLY THE RIGHT CONTROLER driver and pressed F6, then it was only one option in the list so i did that then, CONTINUW with an oem cd win xp pro spk 2, then at the WELCOME TO SETUP screen, i selected the "TO SETUP WINDOWS XP now press enter" then i got on the screen this Message: "Setup did not find any hard disk drives installed in your comp. make sure any hard disk drives are powered and properly connected to your computer and that any disk-related hardware configuration is correct this may involve running a manufacturer-supplied diag or setup program.set p cannot continue to quit setyp press F3".I have tested the hd with dell diag. tool and al test pass, i believe has to be that the mate boot record has been corrupted or a virus, the thing is i can not even run R console or the Repair/install cause of the above message, is there any suggestion to add this hd to another computer and be able to check the boot.ini and see what is wrong, this is a hd with only one partition, but the problem i have or the one that was created is cause i had a laptop hd that i could not make boot in the laptop so i took it and added to this comp. to the ide 1 controller and then i ran defrag on it, this one has two part c and d so c was the os and d was for other applications, i ran the defrag on it , then i did not remove from the device manager i just simply turn of the dell machine and Physicly remove the laptop hd, then when i was trying to boot the dell 470, i got the the stop error:"STOP: 0X0000007B(0XBA4EB524,0XC0000034, 0X00000000, 0X00000000)", so i think the Boot.ini file is corrupted, the machine is confused or the sata controller driver got corrupted, i am wondering of any sugestion about modifiying the boot.ini file or FIXMBR how in my case, i don't want to reformat the hd .
View 2 Replies View RelatedI dug around some before posting, but I couldn't find anyone having the same problem as me, and I'm hoping this is the most appropriate forum. I apologize for the length, but I wanted to post everything I thought might be pertinent. I was playing Guild Wars when my GeForce 4 Ti4400 died. I got a working Radeon 9700 from a friend (he was using it up until the moment I got it, and I ran AquaMark 3D on it) and ran into only a billion problems. When I performed certain actions involving the online video game Guild Wars, my computer would suddenly reboot with no warning. I adjusted "reboot on error" in the system properties. It no longer rebooted, but instead, I got a solid blue screen (no words, just a blue screen), and I had to hold the power switch down to turn off the system. I suspect that troubleshooting this BSoD problem and putting my system through that repeatedly probably messed up some settings or something. The last thing I did to my computer was install the ATI Catalyst 7.8 display driver only (I was testing out the various driver releases one-by-one to see if any of them fixed my BSoD problem). It installed, asked me if I wanted to restart, I clicked yes, it began restarting, froze at a black screen (not the first time I had that problem since all my video card/Guild Wars problems), I once again held the power switch down to turn it off, waited a few seconds to turn it back on, and since then I have had the error described under the "Current Problem" heading above.
View 3 Replies View RelatedHewlett Packard PC. Hangs on start up at HP Logo window so I planned to reformat/reinstall XP Home Edition.
Pressed F1 to get into BIOS and it displays the words..."entering Setup." but it just hangs there never lets me into the BIOS.
i cant access bios on my laptop and my laptop wont bootup.
View 2 Replies View RelatedI can't seem to be able to get into my System's BIOS, that system being Windows XP Professional. I've tried the Hold Del at startup method, but it doesn't work.Is there an alternate method with which I could use?
View 12 Replies View RelatedI have a old Sony VIAO PCV-1112 with Windows XP. I was out of town (so I don't know what the trigger for the issue was) and came back to a black screen that begins with "Award Medallion Bios v 6.0". It also says "Hardware Monitor found an error. Enter power setup menu for details." At the bottom of the screen is shows: Press F1 to continue. F2 to enter setup.
a. Nothing happens when I press F2.
b. When I press F1, the Windows loading screen appears, but it fails to initialize XP and goes to a black screen that says that Windows failed to load...and it lists the prompts to reboot in Safe Mode, Normal Mode, Normal Mode with prompt, Normal Mode with Networking, Last Known Good Config, etc. No matter which mode I choose, it reboots and goes back to the Award Medallion Bios v6.0 message screen.
c. When I press Esc > F8 > F1, I am able to get the boot order to pop up and I selected boot from DVD/CD drive. I've tried putting various iso files on disc into that drive in the hopes of trying to get in to recover data files off the HDD. I tried rebooting with the ISO file in the DVD/CD drive, and nothing happens with any of these: Bit Defender; Kaspersky Rescue; or Avira Rescue. I rebooted with the Knoppix rescue ISO, and it actually initialized the DVD/CD drive for about 30 seconds - showed a black screen with a flashing prompt (couldn't type anything though) and then it went back to the Award Medallion Bios v6.0 message screen. I thought it might be the way I copied the ISO files; since when I copied them on my HP laptop, I got warning messages that not all related information would be copied. So I'm looking for an ISO copy app that might help with that? Unless I'm barking up the wrong tree...?
d. When I put in the Windows Recovery CD in that same drive, it does pull up the recovery GUI - but I don't want to loose my data. So it does recognize that Windows ISO.I'm at a loss on how to get into the VIAO hdd to try to copy down the data files that I need, before restoring Windows XP. Is there a way to connect my laptop to the PC to try to copy down the files? I'm a computer newbie, so I need a walk through on what to do.
While in XP I deleted a partiain that had Fedora on it. I was using GRUB to do multi-boot. When I rebooted XP it booted to the GRUB command line. I rebooted and hit F12 to try to get to system settings and after I chose system settings it went right back to the GRUB command line. I rebooted again and hit F2 to get to system settings and it went straight to the GRUB command line again.I'm pretty sure I need to fix my MBR but, I can't change my settings to boot from my CD and I don't have a floppy drive.
View 14 Replies View RelatedI cannot on starting/restarting Compaq Presario, XP SP2 access either the Bios nor Safe Mode using any of the function keys when CPU is starting up. I have to go to BOOT.INIT to select the Safe Mode and then restart
View 1 Replies View RelatedI am trying to access my system setup , So i can boot from my xp cd .I tried to hit F2 but it just keeps taking me to a black screen wanting my pw . I forgot my Pw and after trying to guess my pw to many times it now just shows a black screen wanting a pw ? How can i get pass this ? I have never seen this before .Need a Pw to get to bios setup?I cant boot from my cd unless i get into the bios setup .
View 3 Replies View Relatedjust installed a second internal hard drive. tried to access bios at start up (to setup hard drive) but system doesn't respond to ANY keyboard keys. system just continues with normal Windows boot-up. once XP is running all functions and software seem fine. no matter how many times I try at "Press Del to enter Setup" nothing works. Jusat before I had this problem, I had a problem with software (which I have removed) that caused my system to lock up. when I rebooted system stopped and offerred reboot options, ea: Safe Mode, but I the arrow keys would not work, system just went directly to Windows boot up.how can I access the bios if system doesn't respond to keyboard?
View 5 Replies View RelatedA few days ago strange lines started appearing on my computer screen. It has progressed and I could barely see anything. Then monitor kept going into "power saver" mode and back when I booted Windows in normal mode. I booted Windows in "safe mode". Monitor wasn't shutting off anymore but the screen was barely readable.I managed to save my data on external drive. I put in my Windows installation disk and restarted computer wanting to format the hard disk and reinstall Windows.When I would restart I would see black screen and hear DVD drive spinning but nothing was happening. Now when I restart I see this .This screen just stands there. I cannot access the BIOS, load Windows or boot from CD/DVD. All 3 fans in my comp work fine when computer is on. I tried removing this battery and putting it back later but it didn't help. My computer has 2 gigs RAM, runs Win XP Professional SP2 and this is my motherboard .At this point I have no idea what to do or even what caused this. I was hoping to format and reinstall Windows but I'm unable to boot.
View 3 Replies View RelatedI'm Currently Dual-booting between Windows XP and Fedora Core 5 on my laptop. I no longer want FC5 so I thought I would format that partition to regain my hard drive space. I thought the easiest way to do that would be to boot from my windows CD, but discovered that my System won't do that anymore (I know it used to, because thats how I installed FC5 in the first place). It won't boot from my FC5 cd's either.So I tried to access the BIOS to see what's going on, but for some reason I can't. The startup screen tells me to push F2 but that doesn't work.
View 9 Replies View RelatedIs there any way to access the bios of a computer with another computer, via a direct link or a router? I am sure that the bios have been affected and attempts to boot from either a floppy or cd get ignored in the loading process and the bios canot find the module to activate the periferal devices ie: keyboard, mouse, usb ports. I am at a total loss of how to do this.
View 8 Replies View Relatedonce the on button was pushed, it came up with the BIOS screen asking for the password.I removed the CMOS battery, which allowed me to change the Password so I can get onto BIOS now. However, when I boot now it just comes up with the BIOS screen.I set HD to boot first, aswell as setting the clock and date. I then ask it to save and quit, after which it shut's down, and reboots, only, BIOS keeps coming up. And I need to get this sorted asap
View 14 Replies View RelatedI have had windows XP Pro installed, updated and running fine until about a week ago. I was away from home for about a week and left the machine plugged into the mains but powered down. When I returned home to boot up, it kept doing things like constantly hanging on parts of the bios POST screen, eventually booting up after thirty or so complete restarts. It finally booted into windows but after the last shutting down, it will now not boot up at all. I have replaced the bios battery and reset the bios several times.
View 5 Replies View RelatedWhen I turn on my computer, it does the bios check, then goes into the bios screen on its own. I have checked all of the bios settings, and see nothing set wrong. The only way I can get itno my xp pro system, is to use "F8" during the bios check, the select my hd from there, then it seems only half of my programs work, and it also seems to be randomly changing the programs that do not work, when I do this.
View 1 Replies View RelatedGot a bit of a problem with my housemates pc.A friend gave him some extra RAM, i checked it out and it was crucial 512mb pc2100 CL2.5, and although it didn't match his exsisting RAM it seemed to me that his mobo would only run the FSB at 200mhz anyway so i went ahead and fitted it.It worked fine I then noticed his system temp was running a little high (60-65 degrees), so i took his heatsink off and cleaned the dust and refitted it with some new thermal compound.I added too much and the temp went up. To nearly 90 degrees.I shut it dwon as i didn't want the cpu to pop, cleaned it off, reapplied less compound and figured this would work fine.Now we have the problem. Most of the time: Power on and nothing happens. No bios, no beeps. Occasionally: Power on, i jump into the bios, the temp looks fine (30-40 degrees) and then it freezes right there in the bios after about 30 seconds to a minute.This sounds like a heat issue, but the last temp reading before freeze is 33 degrees.?I've double and triple checked that the heatsink is on properly and thats fine. I followed the official guide on how much compound to use (a blob the size of an uncooked short grain of rice).
View 5 Replies View RelatedIm new to PCs and since my motherboard is three years old is it a good idea to upgrade? I contacted the maker of my motherboard and they say an upgrade is available and sent it to me for { DON'T CRACKUP} $49.00. I already read that you can really mess up your PC if you do one thing wrong when upgrading. Am I a fool for buying the upgrade? Please let me know as I can send the Floppy discs back.
View 2 Replies View RelatedI have ibm thinkpad R51 2887 nq2 series .My system has been crashed as it is not starting.The whole system gets hang after showing the first ibm screen. The bios utility setup is not getting opened through access ibm button . In safe mode it shows that system BIOS and video BIOS is not working and it has been shadowed.sometimes the system gets started ,but after one minute ,it stucks and the whole system paused and nothing happens.It may be the virus attack on BIOS and it also changes the time and date configuration of BIOS. so what should i do .And how i can install BIOS driver to the system.
View 1 Replies View RelatedI just flashed/upgraded my BIOS for my motherboard, and now XP doesn't even boot up.
After the BIOS load, I get a "MBR error 2" message and it just stays there.
My board is an Asus P5N32-SLI SE Deluxe. I used the Asus Update Utility to flash my BIOS.
i have a problem with my Acer Aspire 4732z. Press <F2> to enter SETUP).i must press anykey twice to load the window(i'm using window xp pro).i think it cause by System BIOS shadowed, i want to disable it..but there is no option.
View 2 Replies View RelatedI brought her computer home to use for my school work. Someone signed into the Administrative / Owner name and somehow locked it. We don't have one of those password reset disk that the Windows website says. I have a disk that says "Microsoft Windows XP Home Edition System Recovery CD/DVD" I was told if I reinstalled Windows on the computer that it would erase the entire harddrive. There are alot of pictures on the computer, not to mention Microsoft Office, that I don't want to lose. My mom passed away suddenly and while I know her other passwords, this one is different which leads me to believe one of my younger cousins was messing with her computer and did something they didn't mean.Is there anyway possible to reset the password and use the computer without losing all the pictures on it?
View 2 Replies View RelatedI would like to be able to log access to my folders from the network. That is, I want to know when an administrator has accessed my drive. I have private/confidential information on my PC and do not want administrators to be able to access it, unless I give explicit permission.
View 21 Replies View RelatedWhen I D/Load some programmes I get access is denied. I had previouly reformatted my HD and now have drive F, when I try to access certain folders or /and executable programmes access is denied. Currently trying to install Roboform in Firefox
View 7 Replies View Relatedi just installed a fresh winxp pro, i did not set any password so the windows starts up without asking password, so i believed i have the administrative rights i have 2 local drives (c:) and (d:) i run gpedit.msc and configure the following:
1. remove run in start menu
2. remove search in start menu
3. prohibit command prompt to be use
4. Prevent access to drive access from my computer (drive c: only)
5. Hide specific drive in my computer (drive c: only)
i closed gpedit.msc now i cant re-run gpedit.msc to configure my settings again because i cannot access drive c: where gpedit resides (c:windowssystem32gpedit.msc) i dont want to re-install the whole thing or to start all over again. winxp expert
I did a terrible mistake today. Typically I install XP in C drive and keep My Documents folder in D drive. All of my hard disk drives (except the linux partitions) are NTFS. I encrypted the My Documents folder and all of its files and subfolders.Today I reinstalled XP in the C drive, after a quick format on it. I was unaware of the fact that what might be happened to My Documents folder. Now I can only view the files and folders inside My Documents folder. Neither I open any file, nor I decrypt those files. Windows is saying access denied.
View 9 Replies View Relateda pc with windows xp pro suddenly started not to access the internet or the workgroup it normally worked on.
ethernet card is present in hardware devices, network connection says it "is there", the IP numbers etc. are all as they were.I have even tried a rollback to the time it worked fine, but no net
Quote: Originally Posted by kpmwrestler no, here's the best thing to do (since you are reformatting anyways):
download Parted Magic burn it to cd with ISO Recorder v 2boot to that cd delete all the partitions (if you have more than one)then reboot with the xp cd in and it should boot I'm having the same basic issue as the original poster.
I just picked up a Sony Vaio laptop F270. From what I can gather is it has (2) separate partitions. I want to do a complete wipe/format of the HD and get back to having (1) Large partition
I ran a windows recovery on my HardDrive yesterday - I selected NOT to delete any of my files.Now Ive set windows all up again, and I cannot access my documents. Firstly when i right click on the my documents folder it says 'empty', but when i try to double click it it gives me a 'cant access' error.My hard disk is showing on 1.8 Gb remaining, so my documents are still there somewhere, i just dont know how to access them?
View 2 Replies View RelatedI am unable to access http site, but able to access https site.
View 5 Replies View Related
