Changed Clock Settings In BIOS : System Re-boots By Itself?
Sep 14, 2005
This all started when my computer was shutting down at random times when I was in windows...at first I thought it was my CPU because it was just shutting down when I was playing games... but I no longer think this because it started shutting down when I was just in windows.Anyway so my friend and I started working on it...we thought it was the mild overclock we put on a few weeks earlier. However, my temps were normal and it passed the stress tests we did on it through the BIOS...So we changed the settings back to stock. No luck.Problem not solved. In fact, now we can't stay in windows for more than a couple seconds before it re-boots.
I've recently installed WinXP on an older Compaq (P2, 350mhz, 256mb ram). Yes I know its supposedly under the minimum requirements. But believe it or not it runs pretty good. My problem is that I want to change the system clock but cant find the system clock setting in the Bios. how to change the system clock on an older Compaq like this?
once the on button was pushed, it came up with the BIOS screen asking for the password.I removed the CMOS battery, which allowed me to change the Password so I can get onto BIOS now. However, when I boot now it just comes up with the BIOS screen.I set HD to boot first, aswell as setting the clock and date. I then ask it to save and quit, after which it shut's down, and reboots, only, BIOS keeps coming up. And I need to get this sorted asap
I am trying to get a computer to output the same thing to at least two seperate monitors. All I can seem to manage to do is get an extended desktop, which means I can drag things off of my screen onto the other monitor instead of displaying the same thing on both monitors which is what I am trying to do. When I uncheck the "Extend my windows desktop to this computer" on another display it disables the monitor, and when I enable the display it automatically checks it.
In this Compaq (I know Compaq sucks) computer I have 2 video cards. One onboard, and one PCI. The PCI video card has 2 outputs, the onboard has one. I have reached a point where in Windows XP I can output to 3 seperate monitors utilizing the extended desktop feature, which means I am outputting from the PCI video card and the onboard video card. In order to do this I used a microsoft work around in which you must disable hardware acceleration on each driver.
While in XP I deleted a partiain that had Fedora on it. I was using GRUB to do multi-boot. When I rebooted XP it booted to the GRUB command line. I rebooted and hit F12 to try to get to system settings and after I chose system settings it went right back to the GRUB command line. I rebooted again and hit F2 to get to system settings and it went straight to the GRUB command line again.I'm pretty sure I need to fix my MBR but, I can't change my settings to boot from my CD and I don't have a floppy drive.
for some odd reason, the am/pm portion of the time displayed in the task bar, emails, imessengers, etc has changed to "??????" (6 question marks). I can correct using time/regional settings, but it returns upon rebooting. Windows XP Media Center.
I have done EVERYTHING to figure out WHY my computer clock will NOT stay chaged since the new DST has taken effect. I have unchecked the auto update, unchecked the internet time, changed the time zone and changed it back, went into BIOS and changed it there, d/l the Windows XP (KB931836), and d/l the latest SP2. It will not stay changed.
When I turn on my computer, it does the bios check, then goes into the bios screen on its own. I have checked all of the bios settings, and see nothing set wrong. The only way I can get itno my xp pro system, is to use "F8" during the bios check, the select my hd from there, then it seems only half of my programs work, and it also seems to be randomly changing the programs that do not work, when I do this.
Iam currently on hp windows xp home edition. The video adapter failed on my motherboard. I have replaced it with a 16mb video card and changed the bios to the agp setting for the adapter. I still can not get the start menu to show up.
When I right click on the desktop to change the background settings the only thing I can change is the background color, no pictures, cant browse for pictures or set any of the standard backgrounds as the desktop background. How is this disbaled and how can I enable it again?
What would cause the task bar settings to change? ie: the ability to view inactive icons disappears. Can not access the volume control. A reboot sets it back up with the ability to view inactive task bar functions through the expand task bar icon.
I recently changed my power settings so my monitor would go off after 1 minute while running some scans. Now when I try to change that setting to always on or any other setting, my monitor keeps going black after 1 minute of not being used. Any ideas as to how I can change this?
I have changed the VGA settings for my monitor and after re-boot, I have a blank screen (after the windows start up). I've tried to start in safe mode, but it just runs a bunch of scripts and stalls. I've also tried to start it in any other safe mode, and they do the same thing. I've tried the "last known good configuration" - I get the blank screen. Since I just replaced the hard drive 2 days ago (the old one crashed)
I had a file that I could not open in order to read (CompositeLabProWindows). I hastily went to properties in change the file to a messenger file. The file that open and I was able to read the file how ever, an order for the file to work properly I should have been left alone and not tampered with. The men how many times I download the program is still opens up in Windows messenger. My problem is that I need to restore it back to the way it was prior, and remove that the fault mechanism that all some unknown files open up the messenger.
I would like to understand some of the settings on my AMI BIOS v02.58 plus get suggestions on the recommended settings for my XP Home SP2 system (ASUS P5K3 mobo with INTEL Core 2 Duo E6850/3.0/4MB, RAM 2GB/DDR3/PC3-8500):1. Advanced / PCIPnP / Plug And Play O/S: Settings are NO (default) and YES NO = Lets the BIOS configure all the devices in the system. YES = Lets the OS configure PnP devices not required for boot if your system has a PnP OS.Should I leave the default NO setting or change it to YES and why?
is there any way i can save or print out my BIOS settings, without writting them all by hand, recently the printer port was turned off, had i known the original settings the remedy would have taken minutes instead of hours, thanking you all in anticipation.
for some reason my screen saver does not come on and my screen does not turn off. for testing purposes i changed the screen saver to 1 min and changed the power setting for the lcd monitor to turn off after 2 min. i waited for like an hour but the lcd is still on and the screen saver has not come on. this is on a dell e1505 laptop. it worked before.
I have one of my users pc's (running XP Pro on a Windows 2003 network), it boots up fine but whenever she goes to print the spoolsv hits 100% and we have to kill it. Of course without it she can't print. This has also happened occasionally when she opens an application, the spoolsv will hit 100%. Does anyone have any ideas? I need to get her printing again.
I recently changed a setting on my Dell laptop and now when I try and log on it doesn't recognize my password. I can't access anything on it. I receive a log on error.
I've changed the settings under power management so when i press the power button or close the lid the laptop should hibernate. When i do either of these the screen just stays on preparing to hibernate.really annoying cos i have then have to restart my laptop.
I made the huge mistake of deciding to wipe ME and re-load an operating system (XP) onto a Compaq destktop PC (800mhz).To cut a long story short, with the re-formatted hard drive installed (NTFS), upon trying to get the PC to boot from the CD ROM to install XP it will not go any further than telling me that it cannot detect an operating system. It doesn't want to let the bootable CD ROM take over, although you can hear the CD ROM spinning, as if trying initiate a boot-up. I have tried everything - trying different CD ROMs, different ribbon cables, unplugging other hardware etc etc, but it always stops at the aforementioned message. When I go into the BIOS to see if I can alter the settings to force the PC to only boot up from the CD ROM (and try other things), the command (F10) to make changes, or to save the changes and exit will not work. It is as if the feature has been locked to stop anyone altering the BIOS settings. I haven't come across this before.
two new computers a router and networked the home. I have the host computer and my children are each on wireless as clients. Both children can access internet, but only 1 can access printer. I actually figured out the problem that's huge as I'm a network idiot. My son's computer (can't use printer) is using my old computer with MY name on it. I am on the new computer with MY name on it. So when he tries to access the printer it doesn't know where to go. I have windows xp HOME and from what I see I can't change the name on his computer the folder immediately under documents & settings). I followed instructions to copy from one folder to another (ie, Mine to his) using a 3rd administrator account. I could copy any account but mine.
I recently uninstalled what I thought were some unnecessary fonts on my XP SP2 notebook, but began having serious display problems in some apps and dialog boxes, the text being either much too small or large.I've trimmed the Fonts folder in the past with no problems, but this time I seem to have majorly screwed the pooch. Even after reinstalling all fonts, the problems persist.
the problem is, my mouse and keyboard are not working in that OS, so i cant do a damn thing, so luckily i have another OS installed on the second partition (which is where im writing from right now) and i was thinking, maybe i can export that key, as a reg-file and then just click on it, fixing the whole issue. Bad thinking, because i have nothing to click it with, no mouse, no keyboard! And its saved, right there on the desktop!!!So to my question, is there any way to add that key to the other OS registry from this OS, or maybe is there a way to activate the export-file at startup or something? maybe with DOS?
Got a bit of a problem with my housemates pc.A friend gave him some extra RAM, i checked it out and it was crucial 512mb pc2100 CL2.5, and although it didn't match his exsisting RAM it seemed to me that his mobo would only run the FSB at 200mhz anyway so i went ahead and fitted it.It worked fine I then noticed his system temp was running a little high (60-65 degrees), so i took his heatsink off and cleaned the dust and refitted it with some new thermal compound.I added too much and the temp went up. To nearly 90 degrees.I shut it dwon as i didn't want the cpu to pop, cleaned it off, reapplied less compound and figured this would work fine.Now we have the problem. Most of the time: Power on and nothing happens. No bios, no beeps. Occasionally: Power on, i jump into the bios, the temp looks fine (30-40 degrees) and then it freezes right there in the bios after about 30 seconds to a minute.This sounds like a heat issue, but the last temp reading before freeze is 33 degrees.?I've double and triple checked that the heatsink is on properly and thats fine. I followed the official guide on how much compound to use (a blob the size of an uncooked short grain of rice).
I have Windows XP OS installed on my HP Pavilion 753n Desktop. I currently have 512MB SDRAM loaded, and want to upgrade with another 512MB. Is it necessary to update my BIOS settings (current BIOS on computer is dated 11 September 2002) prior to upgrading the memory?
I have ibm thinkpad R51 2887 nq2 series .My system has been crashed as it is not starting.The whole system gets hang after showing the first ibm screen. The bios utility setup is not getting opened through access ibm button . In safe mode it shows that system BIOS and video BIOS is not working and it has been shadowed.sometimes the system gets started ,but after one minute ,it stucks and the whole system paused and nothing happens.It may be the virus attack on BIOS and it also changes the time and date configuration of BIOS. so what should i do .And how i can install BIOS driver to the system.
I have to keep reseting my computer time every so often. It's worse when I turn on the computer. It's always ahead by about thirty minutes, I have to keep setting it back. It never stays put. (CMOS battery?) Anything I can do to fix it? Windows 2000
EVERY monday morning, something turns back my computer clock by 1 hour! it has caused me to miss important things! does anyone have experience with this problem? i have no idea how to go about trying to isolate the cause of this.
