I have changed the VGA settings for my monitor and after re-boot, I have a blank screen (after the windows start up). I've tried to start in safe mode, but it just runs a bunch of scripts and stalls. I've also tried to start it in any other safe mode, and they do the same thing. I've tried the "last known good configuration" - I get the blank screen. Since I just replaced the hard drive 2 days ago (the old one crashed)
I've been messing with and Googling this problem all day and am stumped My laptop: Toshiba A105-S4134 XP SP2 MCE 2005 Intel T2400 Duo Core 2 GB RAM1. Two days ago I had a glitch - a bunch of browser windows were open and the system just sort of froze up. I ended up doing a hard restart. The PC then took a longer than normal time to boot back up.2. That made me nervous, so yesterday I made True Image images of both partitions on the HD, that is C: (OS and apps) and D: (data).3. This morning I decided to run a memory diagnostic disk (I had memtest86+ and Windows Diagnostics CDs on hand). I set boot priority to CD/DVD ROM using Start > All Programs > Toshiba > Utilities > Toshiba Assist > Optimize > Toshiba Hardware Settings
I went into bios and disabled the search for the A: drive , because i couldn't care less. then it brought me to the screen to choose to open in safe mode, normally, or from the last point where windows worked well. problem : i can not use my keyboard in this setting, it works in bios, but i cant choose to load from the last working point of the OS.
i am working on a friends computer .she installed a program and all was ok after that . she turned off the computer and went on holiday for a week . came back started the computer and received an error message "Windows cannot start " if windows doesnt start normally . windows will restart " a mesage similiar tothis ..and she receives the same message everytime .. ( she isnt available ATM for me to get hte exact error msg ) i have tried to get into safe mode to remove this program . but safe mode isnt available . i have tried F5 on start up . and safe mode isnt in the options ..& the same with F8 no option to enter windows in safe mode . what would anyone suggest to try next ?
On starting up my PC I am unable to get past the initial BIOS readout it gets as far as 'Mouse Initialized' and then freezes. Pressing F8 does not work nor following the displayed message 'Press F2 to enter SETUP'
I've tried several times to start in safe mode on XP. All of the guides I've referenced say F8 is the key. However, when I boot, the only functions I see on the screen that only lingers for a moment are F10 and esc.I've tried the tapping method also. Nothing.I'm talking about an hp notebook
Just the other day i reset my computer but to my surprise it did not load up XP, instead it stayed with a black screen with a flashing underscore in the top left hand corner. I thought it meant it was taking longer to load but it is just stuck there and i can't access my files!
I cannot enter safe mode in Windows XP Home Edition by rebooting and pressing F8. The last thing I did to my computer was add a second hard drive, reboot, and, press F1. When I did that, I saw "entering setup". I looked around, didn't change anything and exited. I have re-installed WinXP and still can't enter safe mode.
My computer is running horribly slow and so I've tried to enter safe mode but I get a blue screen with instructions.It says to check to be sure you have adequate disk space. Says to disable the driver (causing problems) or check with manufacturer for driver updates or try changing video adapters.I cannot get into safe mode at all to run spybot (freezes when in regular mode).I had to type this from another computer.The technical information is:*** STOP: 0x0000007E (0xc0000005, 0x80537009, 0xF7A2B1B4, 0xF7A2AEB0)Thank you
I have Linux and Windows XP sp2 home Have tried searching the forum without any results Tried f8 when script for grub appears but have been unsuccessful
I have a standard PS/2 keyboard and mouse which do not work as I try to enter Safe mode. As I am on Windows 2000 Pro, I need to log on as administrator. I am not password protected, but have no way of clicking the Log in button.There are no settings for Keyboard or Mouse in my BIOS setup
Running a computer I purchased with Windows XP Pro installed (No CD). Will not enter SAFE MODE when tapping F8 during bootup. Would not enter safe mode even after deliberately crashing the computer (pulled the power cord while computer was running).
I have a home built machine running XP Pro. It is a clean installation since had some recent other problems with it and completely formatted hard drive and reinstalled XP. I have added all the Window updates including sp3. I have a GE Force 6200 video card and have installed all the drivers but the machine will not enter sleep mode either manually or automatically (I mention this because I have read elsewhere this was a problem for Vista but haven't seen anything anywhere for XP). I even set the bios to force sleep mode and nothing happened.
When I try to put my computer on standby the following message appears: "The device driver for the Communications Port (COM1) device is preventing the machine from entering standby. Please close all applications and try again. If problem persists, you may need to update the driver." I believe I need to install an updated driver for my display adapter.However, I am having difficulty locating an appropriate download (for no fee, f possible). Could someone point me in the right direction?
every time i push the power button on my laptop, or try to enter hibernation or standby mode in any way, an error pops up that says System Hibernation Failed The device driver for the 'Quick Launch Buttons' device is preventing the machine from entering hibernation. Please close all applications and try again. If the problem persists, you may need to update this driver.i have searched for updates for my driver already so i don't know what to do here.
When I right click on the desktop to change the background settings the only thing I can change is the background color, no pictures, cant browse for pictures or set any of the standard backgrounds as the desktop background. How is this disbaled and how can I enable it again?
I have windows XP on my laptop and it just refuses to enter in a standby mode, neither Hibernate mode.Usually it runs very normally but every time I try to put it on standby I get a blue error screen that says that my system have to shut down because of a serious error and that I have to check the bios. After that I just switch off the button and have to turn it off!
For some reason my computer won't enter standby mode on its own. Most of the time it won't start a screen saver either. I have it programmed to start the screen saver after 3 minutes and to enter standby mode after 15 minutes. However, I'll come back an hour later only to find that the battery has been completely drained. Anyone know why my computer won't enter standby mode or start its screen saver?
My laptop (the same one I've had for over two years) suddenly won't enter standby mode at all. When I close the laptop, it just hangs on the "entering standby mode" screen and drains the battery. When I open it up again, it shows that screen, and I have to press the power button to turn it off completely and start all over. When I try to put it in standby mode manually (by selecting it in the "turn off computer" options, the same thing happens. It seemingly started out of the blue and Every time I close it now, I have to completely shut it down, which is a pain.
power option properties is set to enter power save mode and turn off my monitor after 1 minute and my screen saver is set to "none". my monitor will enter power save mode turn off after 1 minute and stay off.however,my monitor won't enter power save mode after i am finished streaming a video on Internet, facebook, or myspace using both ie8 or firefox. also after watching a video with any media player such as wpm, quicktime or vlc media player.fter one minute the monitor switches off for a second and then switches right back on.then if the power scheme settings are re-applyed my monitor will enter power save mode and turn off again
The operating System is Windows XP with SP3. The system restore stops working at any point. To run the system restore has to enter the save mode. Do you know what the problem looks like and how to fix the problem?
What would cause the task bar settings to change? ie: the ability to view inactive icons disappears. Can not access the volume control. A reboot sets it back up with the ability to view inactive task bar functions through the expand task bar icon.
this is the best way I know to explain all of this. I am running a 3 yr old Gateway with Windows xp and Sp 1 & 2. I have always stayed up to date with my Windows updates deleting cookies, defrags and so on. I am running Avast anti virus and Armor 2 Net firewall. I have noticed over a period of about a mth that my system has been getting pretty slow to boot up and load up web pages. Now I am having to manually start my PC and I have to do it in safe mode F8 and click on debugging mode. If I don't do it this way then everything loads up and then my PC just turns itself off. I have PC doctor and I have done a complete diagnostic test and I have gone to antivirus.com and did a virus scan there as well as with my Avast. I am thinking that I may have to totally take everything out and reinstall everything back in. The only thing is -is that I don't know what to type in to get the whole thing going. Also I have been getting a message but only sometimes that says RTL cannot locate HPOIPMO7.exe (HPOIMO7.exe) I haven't a clue what this is. Might it have anything to do with what is going on. I don't mean to write a book here but there is one other thing, the other day I had a window pop up that said that windows needed me to reinstall my xp software and when I tried it said that the version that I was already running was newer than the cd software I was trying to install and wouldn't accept it.
computer was in blue screen. Unplugged and rebooted. Hung at Starting Windows. Unplugged again and rebooted. Selected user and continued on. Hung after desktop image was downloaded and normal desktop was presented. If I moved the cursor to the task bar, got hour glass. Could not get task manager to appear and could not start any program.Booted in safe mode with networking.
but i think i posted this in the other area before. i had some bugs i couldn't delete in normal mode, so im like oh kay, easy, go in safe and delete the suckers. i restart my computer and f8, and try to go into safe mode, said something about your computer was shut down incorrectly or power lost and some files are missing now.
so im like, ummmmmmmmmmm... how do i get round this. so, i restarted my computer and put it in to the (Last Known Good Configuration), i know, i went to Run>msconfig>Boot.ini>tick /SAFEBOOT and restart my computer, not knowing this was one of the biggest mistakes i've ever done. it starts and it runs a little big and boooom!!! blue screen pops up and this is what it says, "a problem has been detected and windows has been shut down to prevent damange to your computer....
I recently changed my power settings so my monitor would go off after 1 minute while running some scans. Now when I try to change that setting to always on or any other setting, my monitor keeps going black after 1 minute of not being used. Any ideas as to how I can change this?
I had a file that I could not open in order to read (CompositeLabProWindows). I hastily went to properties in change the file to a messenger file. The file that open and I was able to read the file how ever, an order for the file to work properly I should have been left alone and not tampered with. The men how many times I download the program is still opens up in Windows messenger. My problem is that I need to restore it back to the way it was prior, and remove that the fault mechanism that all some unknown files open up the messenger.
