Automatic Shutdown - Enable The Driver
Oct 23, 2002
Like lots of other people my computer wouldn't shutdown automatically after shutting down windows xp...I tried enabling APM, but then the computer wouldn't shutdown at all, and just restarted all the time. so I always had to manually turn off my computer when the "It is now safe to turn off your computer" screen came up.
Well I fixed this problem, and came across the solution, for me accidently. I went to Device Manager, then to View then Show Hidden Devices, then you look on the list for NT Apm/Legacy Support. Under that is NT Apm/Legacy Interface Node. I found that this driver was disabled. Why, I'm not too sure, but I enabled it and now when I shut down windows, my computer turns off automatically. I went into power management and the APM was also activated/enabledIt must do this when you enable the driver.
View 9 Replies
ADVERTISEMENT
Apr 27, 2007
xp pro sp2 automatic updates enabled. My computer restarts automatically after shut down. This happens sometimes immediately, sometimes after a delay of up to 10 minutes. I tried using third party shut down programs, but that did not help. However if I let the computer go into hibernate, it shuts down and does not restart. I do not have Roxio installed, and in the settings for startup and recovery the automatic restart is disabled.
View 8 Replies
View Related
Aug 11, 2009
This lady doesnt do much with her pc. Let her granddaughter download crap from bearshare and you know the malware virus issues galore. I ran a couple of programs to get rid of those issues. She had NO antivirus so I was going to download the trial version to Trend Micro for her. This is when I discovered she had never updated her pc. Trend says it will only work on SP2 and above. Tried to, and updates were disabled. Followed the microsoft KB articles related to turning on the auto updates, the BITS services, to no avail. Tried to register and reregister the DLL's, that failed also. Tried to go to the update site, tried to downloading the malicious removal tool, it will not let me run it. I ran housecall, a bunch of vulnerabilities show up possible related to just the SP1 issue.
View 7 Replies
View Related
Mar 23, 2009
how to resolve this virus. Everytime i type cmd in run, it automatically shutdown my pc in 1 sec. I have mcafee it detects some of the viruses but still theres a virus in my pc. i wanna know the specific name in of this virus and to resolve it.
View 2 Replies
View Related
Jul 29, 2009
For the third time in about three weeks Windows has had to shut down. The error message advises me to check for BIOS update with the hardware vendor and to disable caching and shadowing. (I checked with Dell and ran their automatic scans; they report all okay.) The details in the error message are:*** Stop: OxOOOOOO8E (OXCOOOOOO5), OXBF90714C, OxB31149F8, OxOOOOOOOO *** Win32k.sys Address BF90714C base at BF 8000000, Datestamp 49e87572 I do not know what this means, what it might be telling me about my system, nor do I know what I should do about it
View 1 Replies
View Related
Aug 7, 2007
Is there anyway I can make my computer automatically shut down after x amount of time not using it?
View 1 Replies
View Related
Sep 24, 2005
My PC is shutting down very frequently with a dialog box giving a message some thing like this:he action is initiated by NT AUHORITYSYSTEM
C:Windowssystem32lsass.exe interrupted unexpectedly With code -1073741819I am using OS Windows XP Professional edition And Norton Antivirus with automatic update
In last half an hour it has popped up a message more than 20 times telling that it has found and deleted a virus from my system
View 3 Replies
View Related
Jul 11, 2006
I have a Dell Inspiron 8100 laptop running XP Home. The VGA driver has been disabled and all I get after bootup is a black screen. None of the safe modes work. I gan get into recovery. How do I re-enable the VGA driver that was disabled?
View 19 Replies
View Related
May 27, 2006
I have a Dell Dimension 8400 running windows xp home. 2.99GHZ processor and 58 GB free space left. My problem: My computer automatically goes into hibernation mode and will not start up again for at least 5-10 minutes after. It gives no warning whatsoever when this happens. I'm risking it happening right now. I have the computer set to stay on at all times. All power options are set to "never" turn off.
View 1 Replies
View Related
Jul 9, 2010
I'm new to this site and I'm not very tech savy, but anyways I'm running a basic, older model e-machines computer with windows xp sp3. When I turn it on it gives me a couple of choices; start windows normally, start in safe mode, last configuration that worked etc. Anyway I've tried all of them and the same thing happens, it goes to the boot screen for a few seconds and then it shuts off, anyone know about this problem? .
View 2 Replies
View Related
Jan 2, 2005
upon start of my windows xp pro a runtime routine starts with the command looking somehow like this:shutdown -t-g 00 -f.Before I can even react the computer shuts down. Any idea how i can get this strange command out?Now i read also an exe file "soundman.exe" which looks strange to me..... but not much more i can see - all happens too quick,Already tried system reset, repair of xp via disk, update to sp2..... the command remains in place. Need to get it out somehow diffenrtly.
View 14 Replies
View Related
May 30, 2009
I have windows xp set for automatic updates. When I shutdown it says there are update ready and they attempt to install but fail.
View 5 Replies
View Related
Jul 1, 2010
i recently formatted by acer 5583wxmi and unable to find Lan driver for it any where, able to go online thorugh wireless but not through lan as driver is not installed where can i find my lan driver for acer laptop. i have installed linux on one f the partition but unable to enable to the wifi its working fine under xp but nt in linux.
View 1 Replies
View Related
Aug 3, 2010
i remote into my XP box everything is fine except when i shut down using a shutdown shortcut and other shutdown utilities no matter what after i get booted off the remote session the computer looks like its shutting down then stays on for a few seconds then a BSOD appear. I have been trying to figure out why for the past week and no solution so im hoping someone can chime in..The problem is only on remote if i shut down locally never a single BSOD and no hardware has changed. No driver issues. ive read and tried all the usual solutions. Need someone here to chime in on specifics.Ive also tried to remote in with bare minimum and no go. same thing.
View 1 Replies
View Related
Aug 28, 2003
This is weird. I have to go through the shutdown procedure twice, i.e., Start/Shut Down/Shut Down and click Ok, then Start/Shut Down/Shut Down and click Ok again. It will then shutdown properly. The same thing happens when I try to "Restart." After doing the first shutdown sequence, everything is normal. I can open programs, surf the web, etc. It's as if I never tried to shut it down at all. Only after the second shutdown procedure will it shutdown fully. One note: When I go through the first shutdown sequence, my taskbar pops up and the desktop is darkened. After clicking Ok, the taskbar autohides and my desktop returns to its normal color.I have only had this problem for the last month or two. Before that, all was fine. It's not critical since I can shut it down. It's just annoying to have to do it twice.I have Windows 2000 Pro, SP4, build 5.00.2195.
View 3 Replies
View Related
Jun 13, 2005
When attempting to "shutdown" or "reboot", I have to do it twice. When I select "Start" then either shutdown or reboot, my desktop will flicker a couple of times, and then nothing appears to happen. I must select "start" again and then either shutdown or reboot and then they will work as expected.
View 7 Replies
View Related
Aug 13, 2009
I have searched around a bit to see if others have ran into this problem, but I have had no luck so far. When I start my computer, it pops up with the standard menu it uses when an OS error has caused a restart. I can't get it too load windows using safe mode, last known good configuration, or normal mode. I never even see the windows loading screen, it restarts immediately.
View 1 Replies
View Related
Oct 26, 2007
I have a Gateway 7422GX which as a Mobility Radeon 9550. I repaired windows using the cd because I restarted my computer and it was either going to take 7min+ to boot, or just wasn't going to. I got stuck at the windows splash screen. I'm using windows professional. Whenever I try to install any of the drivers, I get the same error message: Setup did not find a driver compatible with your current hardware or operating system. Setup will now exit.
View 10 Replies
View Related
Aug 3, 2007
I have this seriously big problem on my computer (well why else would i be here)i have a ACER Aspire L100 which is a VERY good pc.it used to have Media Centre edition as the operating system but it suddenly stopped working. so i was forced to install windows xp home edition.now when i install the sound driver ever time i try and open up a media program such as media player or itunes and turns around and tells me that there is a problem with the sound card and another program must be using it. The graphic driver is the other driver that wont install properly. when i run the installation i get a message that reads
ive tried and run windows update but it doesnt find anything.
Thanks in advance
Peter
View 4 Replies
View Related
Feb 27, 2008
install a sound driver or audio driver on windows xp, it worked on windows millenium before i upgraded to windows xp, can someone please tell me what i must do to install a sound driver and or audio driver i also have no access to the internet on that computer, this is my spare
View 1 Replies
View Related
Oct 30, 2009
cookies is disabled. how do i go about puting the cookies back to the on enabled.
View 1 Replies
View Related
Jan 29, 2009
how can I enable auto run?
View 1 Replies
View Related
Dec 30, 2007
I have Windows XP SP2 installed on an "ASUS P4C800-E Deluxe" which used to work with a Celeron D 2.4 GHz. I Finaly bought a P4 3.0 GHz (HT) and changed the CPU. The OS detected the new cpu and with a driver signing warning, it installed the new processor (The driver is provided by Microsoft). Although everything seems to work fine I don't have "Hyper Threading" enabled in Windows, while it is reported to be available in BIOS. I found some boot.ini editing guide that didn't help. I don't want to fresh install windows since I'm faithful to my aged XP which was installed around 1998 and upgraded to-date! How can I enable HT?
View 12 Replies
View Related
Jul 7, 2007
I am using Windows XP. My computer won't let me view Java even though I have it enabled. Certain websites can't be viewed correctly, or it tells me I need to enable Java. I have Active Scripting enabled. I've tried uninstalling Java and reinstalling it again, but it doesn't work.
View 14 Replies
View Related
Mar 9, 2009
I go into Control Panel >Power Options>Hibernate and I click on "enable Hibernation" then apply and I get the message that process cannot be enabled as another process is using file. I do a clean boot and try again but get the same message. Does anyone have an idea of which other process might be using the necessary file and how I can reenable Hibernation?
View 9 Replies
View Related
Nov 21, 2006
I am trying to set up a Sype account. I am told by their wizard that I must enable cookes for Skype.
#1 How do I do that?
#2 Do I use www.skype.com as the site to set up or some other derivation of that site for phone calls?
View 2 Replies
View Related
Aug 31, 2005
Ive never seen this before but i guess it was the work of a virus on my computer but everytime i try to hit ctrl alt dlt, there is a notification that pops up that says "The task manager has been disabled by your administrator". But i dont know how to get in there and re-enable it.
View 12 Replies
View Related
Jun 23, 2005
I have a pc with xp pro sp2 where i cannot enable/disable firewall, it is controlled by domain group policy. I log on with a user with admin rights on the domain and local machine, with gpo i can enable/disable firewall, but I want to control that from the local machine, how can I get it?
View 1 Replies
View Related
Aug 16, 2007
I am unable to run USB on my machine. Whenever i enable USB support from BIOS.... System Became very-2 slow & takes lot of time........CPU usage 100% There was a Yelloe Exclamation sigh in the Device manager in front of Universal Host Controller...when I tried to install driver for this I ....come across this situation.....When I disable this from BIOS system works fine but USB not
View 1 Replies
View Related
Jan 1, 2005
When I tryto enable Hibernate under my power options, and then press the APPLY button, I get a message "Data Error (Cyclic Redundancy Check)".
View 4 Replies
View Related
Aug 24, 2005
When I try to delete something, it says: "Cannot delete Dc177: Access is denied." The only way that I can delete anything is by right-clicking on a file in the recycle bin and deleting it. But even that does not fix the problem, when the recycle bin is empty, the icon shows that the recycle bin is not empty, but no files appear in the recycle bin. The last item I deleted becomes the "invisible" file that I can't delete. I am stumped.
View 8 Replies
View Related
