I have a Dell Dimension 8400 running windows xp home. 2.99GHZ processor and 58 GB free space left. My problem: My computer automatically goes into hibernation mode and will not start up again for at least 5-10 minutes after. It gives no warning whatsoever when this happens. I'm risking it happening right now. I have the computer set to stay on at all times. All power options are set to "never" turn off.
View 1 RepliesI have a Dell Dimension 2400 1.6ghz 1gb RAM with XP Pro on it for several years now. It has many programs installed on it. I purchased a faster used Dell Dimension 8400 3.6ghz hyperthreading 3gb RAM with XP Pro on it.My question is simple. My Dimension 2400 has an IDE hard drive and the 8400 has SATA. Rather than spend days re-installing and tweaking all of the programs on the 8400 I tried the following. I used Acronis Easy Migrate 7 to Image the IDE hard drive to the SATA hard drive and installed it into the 8400. It would not boot, I tried a repair install, then while booting I get a blue screen stop Error 0x0000007B. What do I have to do to fix this so it will boot?
View 11 Replies View RelatedSometimes this computer will start, sometimes it wont When it doesnt, the On button just flashes orange, when it should be solid green. Sometimes it will start up and get to the log on screen and then just shut down and flash orange. It works fine when it does turn on. Iv been through the dell help and support stuff and that doesnt help
View 3 Replies View RelatedWhen I fire up my dell the fan turns on full blast and there is a series of 6 beeps. Not sure what to do.
View 2 Replies View RelatedI get a blue screen when I boot up my Dell Dimension 8400 (XP Home Edition). The message indicates that it is a registry error. I have not added any new hardware or software or any drivers recently. I can not start in safe mode. I have run windows XP home edition setup from the Dell XP installation disc. when I select either enter to setup windows XP or R to repair using the Recovery Console, I do not ger very far before I again get the blue screen message.
View 7 Replies View RelatedMy Dell was running perfectly. I turned it off for a couple of months. When I turned it back on nothing at all happens. A friend said it could be the power supply. I looked inside and found a lot of dust. Don't know what the internal power supply looks like.
View 1 Replies View RelatedStarting a few days ago my Desktop would freeze at the Dell boot up screen.. Id have to turn it off then back on to get anywhere.. The 1st time this happen I turned it off an back on twice an got through.. I didnt think much of it.. Today I was working on the computer and everything just froze At that very moment the last thing i did was change the screen saver to none.. then it all froze.. This time when booting up it jus kept freezing i didnt think i was going to be able to get through but on pwoer up i heard a beep an got an error saying it was having trouble booting up at checkpoint[Ithr]
View 1 Replies View RelatedWhen i start up my dell 8400 it goes straight to the black screen stating windows did not shut down properly and asks to start in normal safe mode so on... no matter which option i choose it goes straight to the blue screen stating the physical dump of memory how can i fix this problem
View 1 Replies View RelatedI have a Dell dimension 8400 running XP. Error on startup reads:checking file system on C:The type of the file system is NTFS The volume is dirt CHKDSK goes through all 3 stages and completes them. The last thing it says is 'Usn Journal verification completed'.But nothing else will respond. I have pulled the plug and started in safe mode, same thing happens or it will run a bunch of dos commands and stop with no result.I have read lots of other threads but I can't find the same exact problem. I can't get to a dos prompt (i think) to type in some of the commands I read about.
View 14 Replies View RelatedHad a major crash and now can not install windows on the Dell pc as it can not see the hard drives anymore.
Installed a brand new hard drive and still no luck just says can not locate a hard drive to install windows on, done a check in the bios on the hard drive and it says it's fine but can not see it on the fresh install.
I would like to upgrade my Dell 8400's graphic card.I am not a gamer.I just purchased a 21" HP widescreen monitor that is capable of 1920x1080 to replace the original (4:3 aspect ratio)Dell monitor that came with the computer.I just want a good quality,name-brand card that will provide the 1920x1080 resolution for the new monitor. The card that came with the computer is not capable of that resolution. My operating system is Windows XP.
View 10 Replies View RelatedMy hard drive's windows files have become corrupt and I need the files on it, so I purchased a new hard drive. I can't seem to install Windows XP Home onto the new hard drive. Everything goes fine, but then I get an error message saying it can't install the product catalogs. Is this because I'm using a reinstall CD that was provided by Dell.
View 14 Replies View RelatedIs there anyway I can make my computer automatically shut down after x amount of time not using it?
View 1 Replies View RelatedI am trying to "Killdisk" my HD so I can reinstall Win Xp on my Dell Dimension 2400 computer.I did reinstall Win Xp many time without any problem in the past, but this time something is totally wrong.It usually take aprox. 1 hour to reinstall but this time it took 5 hours and in the end:"13 minutes to finish install"and it frozes and nothing happen after that, I tryed 5 times with same result.I guess it got Virus/Malware in the root of computer memory. So I tryed to use Killdisk to clean up and start new to reinstall Win Xp, but I got following resxponse:"Error loading Free Dos Kernell"
View 4 Replies View RelatedI'm new to this site and I'm not very tech savy, but anyways I'm running a basic, older model e-machines computer with windows xp sp3. When I turn it on it gives me a couple of choices; start windows normally, start in safe mode, last configuration that worked etc. Anyway I've tried all of them and the same thing happens, it goes to the boot screen for a few seconds and then it shuts off, anyone know about this problem? .
View 2 Replies View Relatedupon start of my windows xp pro a runtime routine starts with the command looking somehow like this:shutdown -t-g 00 -f.Before I can even react the computer shuts down. Any idea how i can get this strange command out?Now i read also an exe file "soundman.exe" which looks strange to me..... but not much more i can see - all happens too quick,Already tried system reset, repair of xp via disk, update to sp2..... the command remains in place. Need to get it out somehow diffenrtly.
View 14 Replies View Relatedxp pro sp2 automatic updates enabled. My computer restarts automatically after shut down. This happens sometimes immediately, sometimes after a delay of up to 10 minutes. I tried using third party shut down programs, but that did not help. However if I let the computer go into hibernate, it shuts down and does not restart. I do not have Roxio installed, and in the settings for startup and recovery the automatic restart is disabled.
View 8 Replies View Relatedi bought this dell demension 4550 used i turn it on it says to hit f12 to reboot i do that and it comes back to the same f12 reboot how do i fix this problem
View 2 Replies View RelatedI got a used Dell Demension 8400, XP Home installed (OEM). I own a copy of XP Home which is not installed on any other machine, I tried updating drilling down through using regedit...it does take the product key. What might I be doing wrong? Thanks.
View 4 Replies View RelatedHAVE DELL 8400 COMES UP FILES UNREADABLE -COULD IT BE SATA HARD DRIVE
View 1 Replies View RelatedDell 8400 desktop..On bootup, the Dell logo screen appears and goes to a 'dos-like' screen advising: Floppy diskette seek failure, strike F1 key to continue or F2 to run Setup Utility'.I get no response from F1 other than a beep. F2 brings me to the setup menu, but can I get to safe mode just in case my 5.5 yr old computer is about dead? Dell just replaced the motherboard & power supply in Oct after that quit working after a surge protected power outage. I don't have many personal files on the C drive other than my iTunes & my email
View 4 Replies View RelatedMy dad's Dell 8400 is having a series of issues. He posted a similar thread in the Hardware forum, but it's possible it might be more than hardware, so checking here to see if ya'll might have some suggestions (as I know this forum gets more visibility and he's getting anxious).He turned on the computer last night to have it not booting up at all. It gave a series of 4 beeps followed by 2 beeps, and then wouldn't do anything after that. He tried multiple times, with one or two of them bring him to the BSD asking to boot in safe mode or system restore.
View 3 Replies View RelatedTransferred all information from Dimension (Dell) to Dell XPS 410. Both computers using XP program. When I start to use my Picasa program I have a continual pop up that says " The DLL "cpuinf32.dll" can not be loaded. OS reports: The specifdied module could not be fouind. Am no computeer whiz--so this is all "Greek" to me. What should I do to correct this?
View 2 Replies View Relatedhow to resolve this virus. Everytime i type cmd in run, it automatically shutdown my pc in 1 sec. I have mcafee it detects some of the viruses but still theres a virus in my pc. i wanna know the specific name in of this virus and to resolve it.
View 2 Replies View RelatedFor the third time in about three weeks Windows has had to shut down. The error message advises me to check for BIOS update with the hardware vendor and to disable caching and shadowing. (I checked with Dell and ran their automatic scans; they report all okay.) The details in the error message are:*** Stop: OxOOOOOO8E (OXCOOOOOO5), OXBF90714C, OxB31149F8, OxOOOOOOOO *** Win32k.sys Address BF90714C base at BF 8000000, Datestamp 49e87572 I do not know what this means, what it might be telling me about my system, nor do I know what I should do about it
View 1 Replies View RelatedLike lots of other people my computer wouldn't shutdown automatically after shutting down windows xp...I tried enabling APM, but then the computer wouldn't shutdown at all, and just restarted all the time. so I always had to manually turn off my computer when the "It is now safe to turn off your computer" screen came up.
Well I fixed this problem, and came across the solution, for me accidently. I went to Device Manager, then to View then Show Hidden Devices, then you look on the list for NT Apm/Legacy Support. Under that is NT Apm/Legacy Interface Node. I found that this driver was disabled. Why, I'm not too sure, but I enabled it and now when I shut down windows, my computer turns off automatically. I went into power management and the APM was also activated/enabledIt must do this when you enable the driver.
My PC is shutting down very frequently with a dialog box giving a message some thing like this:he action is initiated by NT AUHORITYSYSTEM
C:Windowssystem32lsass.exe interrupted unexpectedly With code -1073741819I am using OS Windows XP Professional edition And Norton Antivirus with automatic update
In last half an hour it has popped up a message more than 20 times telling that it has found and deleted a virus from my system
I recently returned to Kliptsch a pair of speakers which were not functioning well. While waiting for the replacements, I am unable to get any sound out of the computer. This includes streaming radio broadcasts as well as TV clips.
View 15 Replies View RelatedI first had this problem when I tried to do the first installation. When it would get to the part of the setup in windows mode, it would just keep rebooting. I was able to finally get it to finish installing, and it seemed to be working fine, untill I tried to make sure all my drivers, applications, and my cable internet conection were installed.
View 37 Replies View RelatedI often but not always get an error message when working online. I am not sure whether it is a dell problem or my internet service provider. I have dial up. A small box pops up in my face and it says . . . windows must now shut down because the RPC service terminated. System shutdown initiated by NT/AUTHORITY then it counts down 60 sec and shuts off my computer. I have no control when it does this, i cannot X it out or make it stop. Very annoying. Sometimes it goes for hours and does not do anything, sometimes it will do it 3 times in 30 min. I have scanned for virus' and it comes up clear.
View 2 Replies View Relatedi'm working on a dell dimension 2400.windows crashed and there are no restore cds.i formated the hardrive and installed win xp professional.in device manager i don't have drivers for the ethernet controller and the usb controller.does anyone know where i can find these?
View 2 Replies View Related