Application Runs On Computer A, But Not Computer B ?
Aug 14, 2005
How does one begin troubleshooting an application that appears to install correctly but fails to start in Windows XP ?I am trying to install the same application on two nearly identical Windows XP workstations. The application (Maxon NET render) installs and runs fine on computer A. On computer B, however, after the application appears to install without error it simply does not start. Clicking the application shortcuts or the executable itself causes the computer to think for a moment, the mouse icon turns into a spinning hourglass for a few seconds, then nothing happens.
It takes up to 15 minutes to start up when you first turn it on. Often takes up to 20 seconds for programs to come up when you hit start. Virtually all software programs take time to come up, even little ones like Notepad. Have lots of slowdowns and freeze ups when using the internet, including trying to type in url's. Anytime the computer isn't in use for a little while, starting up again is always very slow with frequent little freeze ups. Lately, even when we first turn the computer on, we get a low on virtual memory warning in the lower right corner. Somebody told me this could be the problem. If so, why would it need more memory now than in the past when it worked ok?We actually deleted lots of files and some software programs not be used, including video games.We used Spybot, Malwarebytes and our anti virus program a few days back and all 3 came up with no problems.
Okay, I have this laptop with Vista Home Premium that I just can't stand stand anymore. I decided to try to install XP pro on it. I partitioned off a part of the HDD to store data backups and proceded with wiping Vista off the primary partition and went ahead to installing XP. When trying to install XP pro SP2 it got all the way to the partition setup and it did not read the HDD at all. If I press enter anyway I get a BSOD that has a setupdd.exe error. I have researched this error and it seems to relate to hardware incompatibility. I tried installing XP pro with the service pack 3 beta slipstreamed in and had the same problem. I also tried Black XP and it would not even boot from the disk. Then as a last resort I tried installing LastXP and it seemed to have alot better luck. It read the HDD and started installing but it always fails to copy the file "iastor75.sys" and after clicking "skip" it finishes the setup and reboots to another BSOD. I have no idea what iastor75.sys is. I have tried google searches and found nothing conclusive.
BTW my laptop is a Gateway MT6730.
I really really really want XP on this computer. Do you guys think that if I slipstreamed in some chipset and HDD drivers onto the XP disk it would work?
Any comments on this would be greatly appreciated.
My computer fan runs and stays on no booting to post and stays on really loud can not figure this out! What am I missing I turned the computer and tried to reboot after the video screen went crazy and loud noise scrambled appeared! lease help! Does my poor partitons are 28 in number on my biggest drive of 1000gb
My computer starts going really slow after about 11:00-12:00 PM-AM (Programs take forever to start/open and games take about 20 minutes to load.) until i wake up (About 10-11:45 AM ). Anywho I was wondering if there is any thing I can do to help my computer run fast for 24/7, give or take.Just to let you know I'm Not that good with technical stuff, so if there's any that would be difficult for a noob you'll have to explain slowly.
For some reason my windows update (wuauclt.exe) file has decided to run 24 hours a day. This means that it is using 99% of my computer resources. I have run virus and spyware and nothing, I have deleted the file that seems to be causing the problem, but it always comes back on restart.
A few weeks ago I decided to try messing around with the RAM. I took out the last stick and the computer, yet again, seemed to work perfectly… for a week at least (enough time for me to assume it was fixed). The problems persisted. Note that by now not only did I have bsod problems but simple problems like browsers not being able to open, programs crashing at a very high rate,windows unable to shut down, etc. (these reasons made me decide to start experimenting with the RAM) After RAM stick #4 did not work, I started switching out ram (to no avail) And just yesterday I took them all out and put only two in, so I am running 2 gigs memory
Last night, my computer seemed to run fine, I got my hopes up yet again. This morning my comp bsod’d. After waiting an hour, I turned my computer back on and now I have a constant “Microsoft windows, the system has recovered from a serious error” error report sending thing, which no matter how many times I click don’t send or send it will pop up again. I have moved it to the corner of my screen to write this. I believe I may have had this problem before and just restarted to fix it, but I am not sure.
I've got an old msi K7N2G-L board/computer and it's got an old WD1200JB installed and running xp. The problem is that it boots and runs slow as molasses, I'm talking like 10 mins to get it to the log in screen and opening apps takes a good 2-3mins before opening too. If I run a defrag on the drive, things temp speed back up to normal, but as soon as I reboot, it's slow again. If I run the defrag again, everything's cool and speeds go back to normal.So I'm guessing that there's some HD corruption on this drive (at least 5yrs old) and it keeps writing system files to the bad sections of this old HD when it's booting. I've run various fdisks, but none of them reveal any errors. (I should mention that I'm diligently proactive on Antivirus', firewall and Spyware practices, so that's definitely not an option relating to the old drive's slowness.) I've scanned with Avira, Nod32, Kaspersky, Trojansuperantispyware, and checked hijack this entries, there's nothing detected or unusual. Of course, I don't have all of these installed at once.I decided to try and swap the drive out and reinstall xp on this system using a newer WD3200 drive (that I use as a storage drive on one of my other computers.) I run the xp installer, successfully quick format the 3200 partition to NTFS, and everything proceeds fine and fast(keep in mind the 3200 drive was used to store data on my newer comp and was already formatted to ntfs.) Unfortunately, after it successfully finishes the initial install, it gives me the 15 second reboot warning. Okay, I let it reboot, but instead of continuing the install after the reboot, the system hangs on "Verifying DMI Pool Data" and that's it. Nothing happens and I am unable to finish the installation. I tried this like 10 times with 2 different XP home's and I keep getting the same problem. When I go into Bios, the drive is recognized as a 3200/automatic settings? I can't see why xp installs fine on the old WD1200, but not on the WD3200.
I got some help on removing maleware and after running combofix my computer no longer auto runs program/game cd,dvd. My computer has no other problems.
1st I use internet explorer for my web browser. At work when I click on it it pops right up with out even thinking about it Page loads with in 10 seconds every time. At home. Some times it will take 30 seconds to a minute to start after I click on it.2nd issue is this Occasionally I will come into my computer after not using it for 8-10 hours or so and I will have a ton (sometimes 40+) Error messages that say "unable to launch restart.exe".I can close all of them but then the computer runs like a tank. I always have to do a hard shut down after this too.It will NOT restart using the proper methods just hangs up.
computer is running at 100% CPU so, you guessed it, very slow. In the processes it shows the spooler.exe using the power alternating with the System(at bottom of list) - but mostly the spooler.exe. The problem really started when he changed an ink cartridge.Does any of this make sense?
When I Exit Speedfan,my Cpu And Hd Fans Just Go On At Highspeeds And Dont Go Off Until I Go Bak To Speed Fan And Turn It Down Manually.....how Do I Just Get Rid Of Speedfan And Make My Computer How It Used To Be?
i think im postin in the right place. I have a system that i built about a month ago that keeps crashing and i dont know why. It runs XP. when i start the computer, it will either shut down after the windows loading screen, shut down after the motherboard maker screen, or shut down as soon as i power up. I buit it, but this is the first time ive done anything like this before, and i dont know much about the workings of the insides yet.
Using a Toshiba Satellite 1800 Laptop 1GHz Intel P3 - BIOS Ver 1.90 04/18/2002.
The past week or two it seems that the computer locks up, the Task Manager shows the CPU running at 100%. It allows some activity all be it slow & shutting down all programs (which are not locked up) does not stop the activity - including disconnecting the internet. Have run Norton scan, Spybot S&D and Adaware with nothing of significance found. Ran HiJackThis and found some startup stuff and stopped them from running but I don't know enough about the programs that are running to remove them.
Last time I booted I had to force a shutdown after waiting for 15 minutes. Next reboot took 22 minutes for the CPU to back off of 100%. I started Task Mgr very early into the boot, just before the icons started to appear and it showed 33 processes running. I watched as 14 more started up all while the CPU was steady at 100% usage. Then at 5 minutes after booting the processor dropped to 50% bounced around for a minute then went back to 100%. There was some activity through the modem (cable) but not very much. I unplugged the modem power. I shut down Skype, MSN Messenger and MS Defender and about a minute later the CPU dropped to 27%. Nothing of what I shut down appeared to alter anything.
I hope someone can see something...
Here is my latest HiJackThis log
Logfile of HijackThis v1.99.1 Scan saved at 1:09:55 PM, on 8/27/2006 Platform: Windows XP SP2 (WinNT 5.01.2600) MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
When I go to start up my Windows XP, where there should be a welcome screen it reads:Unable to Locate Component This application has failed to start becayse SHLWAPI.dll was not found. Re installing the application may fix the problem.
I friend of mine bought a new HP 6210 all-in-one. When I went to install the software for it I got this error message "%1 is not a valid Win32 application". I have researched this error and as far as I can figure it applies only to windows 2000 server and pro. He is running XP Pro. any suggestions on a fix to get this all-in-one working?
I recently started up my computer and it said: ' This application has failed to start because MSVCP60.dll was not found. Re-installing this application may fix this problem.' I have tried chkdsk /r and safe mode but nothing.
These symptons and problem have started within the past week, without warning: My laptop is now particularly slow, the mouse lags, as does the internet - especially videos and music starts. Also, there is a "service.exe" application error that occurs a split second before the computer turns off, so on the "windows is shutting down" screen. Consequently I'm an unable to read the error code. I presume the services.exe error and the slowing down are related.
I am working with a Dell 2400 running Windows XP Service Pack 3 with a Pentium 4 2.8 GHz processor and 1.2 gig of ram. It still seems particularly slow. I am not sure if it some of the applications that I am running like Norton 360 or some of my settings.
I'm using Windows XP on a home computer. My computer keeps crashing. It locks up and I have to pull the plug. If I'm in a forum, lines of type start disappearing. If I'm trying to open a program I get an error message like "application failed to initialize." Yesterday I got a Runtime error message: "This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
I ran Trend antivirus program and Webroot spysweeper, but no problems identified. I keep getting messages from Bigfix that a problem was encountered but by then I can't get Bigfix to open because it's locked up. I ran a dxdiag but it showed no problems either. The problem started when I ran the Uniblue registry sweeper which I thought was free. It identified some old stuff but charged a fee to fix it, so I deleted Uniblue. I went into regedit and removed Uniblue and while I was there I removed several old games from Gamehouse that had been uninstalled over the past year. I swear I didn't touch anything else in the registry! Please keep responses simple and specific as I don't know much about computers.
I just tried to open Incredimail and got the following message: IncMail.exe Application Error: The application failed to initialize properly (0xc0000044). Click on OK to terminate the application. Surprisingly, my computer didn't lock up yet and I was able to return here to edit my post, but a crash is coming....
Like the title says, everytime i turn my machine on the windows page appears on start and the load bar just keeps going. I left this running for an hour and nothing happened.
I have read tons of stuff and tried loads of stuff and yes you guessed it nothing has sorted it out.
My computer knowledge isnt great so if this requires Bios work or Command prompts i will need some detailed help.
I went out of town for 2 weeks, came home and my pc is acting really strange. I've been getting tons of pop-ups, to the point my computer freezes and i must restart. Not only that but it randomly reboots itself even when not being used. Also, when i go to delete files now, the file does NOT go into the recycle bin. I looked at the settings and there is no check mark next to the "do not move files into recycle bin". My BF said he had been downloading things so I figured maybe its a virus or something. I ran Nortons... nothing. Ran AVG... nothing. A friend told me it sounded like spyware so he told me to run Adaware & Spybot. Did that, found a ton of stuff. But when i retarted the pc, it wanted to start in "safe mode". I noticed that most of these pop ups are (search miracle ??) Found info that its a trojan, but i dont know. . I dont know what to do, totally computer illiterate.
Is there any way to access the bios of a computer with another computer, via a direct link or a router? I am sure that the bios have been affected and attempts to boot from either a floppy or cd get ignored in the loading process and the bios canot find the module to activate the periferal devices ie: keyboard, mouse, usb ports. I am at a total loss of how to do this.
I have alot of problems with my computer i have alot of pop ups coming up...when i click to get into my computer or into pictures my documents it won't open it just clears everything...when i am on the internet i get redirected to pages that have nothing to do with what i tried to open. i also have a smss.exe opening everytime i turn on the computer and also services.exe
i want to free up space but dont know how, i tried disk clean-up, ccleaner and still not that many space was freeup up also i want my computer to be alot faster because lately its bein very slow.
It appears CNET performs an excellent service to computer users and their desire is to assist individuals acquire computer knowledge.Unfortunately at 63, such input simply is beyond my understanding. I enroll in a class but upon receipt, the printed directions doesn't do/perform as expected. I note your address is changing--I attempted to add the new address to the address folder but my computer will not accept the @ symbol. My question--Is there real basic material to assist one become better acquainted & understand the system?
well computer has 2000 pro, been acting really slow lately, opening programs etc, lost of useless programs installed i think, tried adaware and spybot,
