Every morning after I turn on my computer, the hardisk lights will keep
flashing for about one hour and system is slowed down. I use task manager
found that svhost.exe had 1.3G I/O read and 600M I/O write after PC only had
run for only one hour. What's the cause of it and how can I stop it?
I had to hit the ole restore button and my computer bought me back to the beginning ( XPsp1). When I try to install SP2 I keep getting :" Unable to read or write to database" And then it said:" Service pack 2 did not complete" I also check the Microsoft website and i said I was getting a error code: 0x800710D9
View 4 Replies View RelatedNeed a program that can read images and write the text,So if i had a image with gd somwere in it it would see it and save it to a file.
View 9 Replies View Relatedi would like to know if there's a good place to learn about makingbatch file because i don't know about the syntax. I only program in c,delphi and Java.What i would like to know is if it's possible to do a "while", "if"(Conditions) and "read/write" text files so i can do a several testlike ping few computer in my buisness and be sure that they are wellconnected by creating a file that after it read the name of the computer it will ping and it pings it, write a file with the name of this computer with a "ok" next to it if it worked and "Not connected"
if it can't ping it!
I would like to test the speed of USB 2.0 flash drive read write speed test. Is there any software to test such drive reasonably accurate?
View 2 Replies View RelatedWhen I boot my Dell Inspiron 3800 laptop I get an error message. The background is black and in white text at the top of the screen it reads, "Memory write/read failure at 10000000 read 00ef02ee expected before 00ef00ef decreasing available memory. Does anyone out there know what this means or how to fix this?
View 1 Replies View RelatedEvery time I try to install SP2 either from microsoft's web site or from a copy of the actual file, i get an error message that reads "cannot read or write to the database" and the install stops. It will go through everything except installing the program (i.e. check my key, check the system, backup files etc). What would cause this and how might I fix it? I'm running XP Pro.
View 2 Replies View RelatedI have four computers, three on windows XP and one on Linux. All are connected to the internet via a D Link DI-704. I had to reformat and reload one of my computers yesterday with windows XP and then proceeded to set up the networking. I will call the windows computers A, B and C. I reformatted A. Having run the networking wizard I can now from A read C but not B. B will not let A or C in. I need permission from the administrater. There is no administrater on any computer. C can read A but not B. B can read A and C. Does anybody know what is going on?
View 3 Replies View RelatedI'm trying to obtain write access to a shared folder on my computer via the following command:code: C:Documents and SettingsXXX>net use x: \127.0.0.1docs /u:XXXThe command completed successfully.If I go to My Computer > X: (Where X is the new network drive) I have read access to the files. However, I do not have write access. (For example, if I try to create a new folder)If I'm logged on as 'XXX', which is the user whom the folder belongs to, why do I not have write access to the folder when accessing it as a network drive?I am able to write to the folder if I go to C:Documents and SettingsXXX.docs but not through X:...
View 1 Replies View RelatedI am trying to write a batch file that would make a specific program a default over Windows Picture and Fax viewer.Reading on other forums, I've input the following into Notepad:ftype jpegfile="C:Program FilesNeroNero 7Nero PhotoSnapPhotoSnap.exe" "%1" When I right-click on any .jpg file after that, under properties, I see that Nero PhotoSnap is now the default program, but when I open the file it opens in Windows Picture and Fax viewer still.What am I doing wrong? Do I need to add registry changes to complete this process?
View 5 Replies View RelatedI have a Kingmax 256MB Memory stick which we used once and went to format it and got the prompt "Write Protected Disk" can any one tell how to unwrite protect it. It has no switch on it to lock it or write protect it.
View 6 Replies View RelatedAfter burning CDs for some time with success, both video and music, I'm getting "Writing Errors" when trying the same thing lately, ruining the CD. Here's what I've done so far:Changed the brand of CD from Phillips to Maxell got "write errors" Went from Roxio Easy CD and DVD Creator to Windows Media Player same problem.Tried to contact Roxio tech support.they make it almost impossible, no results Tried to contact Sony (software for the Roxio).they gave me a phone number that ended up being the Hilton Hotel! Then, when I called back, Sony was closed.Went to my "old" Compaq computer running Win98SE, and can burn Roxio CDs successfully, but the system is too slow for video.Hope this is enough info for you expert-type people - I'm trying to avoid system restore.
View 7 Replies View RelatedI recently bought a refurbished Dell OptiPlex GX620 computer that came supplied with XP Pro S2 and S3 installed, a DVD/CD RW device and a floppy drive installed. I installed a Nero 6 program that I used with my old Win 98SE system and was able to copy files and folders from my old computer to be transferred to the new one. Yesterday (4/2/10) I tried to play a DVD and nothing happened. I chose to run E: and saw the various chapters available on the DVD but when I went into Media Player 11, it told me that it could not play the DVD. I tried another DVD but got the same notice. The notice window suggested that I move my video resolution down to 640Xxxx and lower my colors down to 16 bit from 32 bit. I also tried that but no joy. Can anyone suggest what might be happening here? I have a 3.6 Gig processor in this rig so I don't think it's a speed problem.
View 14 Replies View RelatedIf the DVD burner is not the Master of the two DVD drives, your burning software will experience some problems. So, after installing Windows Vista as a "dual boot" operating system, I switched the DVD drives back so the Pioneer DVR-106D = MASTER and the Pioneer 116 = SLAVE. Now I have a write problem to the Pioneer DVR-106D drive. When I attempt to either copy a DVD or just burn a data disk, I get an "INTERNAL TARGET FAILURE" error message. Happens every time now.As my system is already set up as a "Dual Boot" operating system with Windows XP & Vista, I cannot format my "C" drive and reinstall Windows XP to fix this problem.QUESTION: Does anyone know how to correct this problem without formatting and reinstalling Windows xp?
View 2 Replies View RelatedUsing Windows XP Professional when trying to move info to or from a written CD-RW I get a message that the disk is write protected. Remove the protection or use new disk. How do I remove Write Protection?
View 1 Replies View Relatedi have a floppy disc and i can't write to it because it says i need to remove the write protection what is that and how can i remove it
View 5 Replies View Relatedhow could I remove disk write protection from hard disk
View 1 Replies View RelatedI want make a write - protected cd for secure my personal data to present but could not be copy on other pc.
View 1 Replies View RelatedMy write protection seems to be activated on all folders.The box where the check is supposed to be is blackened and when I click to remove it, it goes away.However when I try to remove the folder an error pops up and when I bring up the properties again it shows the box is blackened again.I don't seem to have a problem with files, it only seems to be the folders.
View 13 Replies View RelatedOn old Win 2k system I can Access my files on my USB Flash Disk, however in Windows XP Home system when ever I try to change a file I get a write protection error.
View 8 Replies View RelatedCan someone tell me how to write my hard drive to all zero's?
View 6 Replies View RelatedI've been using XP's CD file burner feature, but is it painfully slow.Is there a setting somewhere to speed it up?
View 6 Replies View RelatedFor some reason, 1 of my DVD's has become, erm.. strange. There are files on it, but Windows (XPHome SPII, automatic updates) states it's empty. All the other DVD's work fine. This was one of the first DVD's I burned on this machine, round about the time SPII came out.
View 13 Replies View RelatedHow do I tell XP to write the data NOW? It is very tiresome when one goes to shut down, and watch all the drives power up to receive those last bytes of data that would be lost forever if the system crashed.Is there a setting that allows one to force XP to perform these writes at an appropriate time,e.g., BEFORE powering down a disc? Or preferably with no delayed writes whatsoever?
View 10 Replies View Relatedafter reading ms + others I have a couple questions the insert disk can only be a floppy? that can't be right todays pc's only have cd or dvd or possible usb any way to write the backup .bkf file to a dvd instead of some hd other than the c drive? the writeup talks about formatting the entire c drive before the new windows install, is it not possible to just just reinstall windows, in the old windows folder, leaving the drive intact, so you still have documents and settings, program files, etc, so that when the asr restores the os image, all the old programs etc are still there ready to run?
View 6 Replies View Related1) I am unable to record data (mostly JPEGs) to a CD-R using WinXP Pro and my sony dru500ax DVD/CD recorder. I have in the past been able to do this with no problem using either the built in windows functionality nor Nero. Now I am unable to use either method and I don't know what has changed. Both methods get partially through the write process and fail (but nothing ends up being written on the CD).
2) I am unable to read CDs that were burned by my father on his computer. The disks clearly have stuff on them and I've been able to get to the content on other machines (at work, at friends, WinXP, Win2K3, etc) But when I put them in my drive and open the drive in explorer it shows that nothing is written on the CD
my flash disk is write protected how will i remove it?
View 2 Replies View RelatedI have a new usb port it is a TONE 4.0GB. I cannot copy files to this drive due to it being write protected. How do I change it.
View 3 Replies View RelatedI have several Administrator users. For each one I have set the username folder in Documents and Settings to allow network sharing including 'allow network users to change my files'. For all but one of the users this works fine and I can access and write files from another PC on the network. However in one case I can only read files and get the following message if I try to write: 'Cannot copy [filename]: Access is denied. Make sure the disk is not full or write-protected and that the file is not currently in use.' The settings appear to be the same for all users so I do not understand why I cannot write in this case. I've tried removing sharing then reapplying it, restarting PC, etc.
View 1 Replies View RelatedI'm trying to use iTunes with my new ipod mini, but the My Music folder on my computer wont grant me access to write anything to it, or alter anything in it and I'm not sure why? It asks me to check whether it has full or write-protection, but it shouldnt have seeing as I am the only user on my computer? anyone be of assistance? its bugging me greatly!
View 3 Replies View RelatedI have few files on a 128 MB my Flash memory stick. It won't allow me to ad or remove files from it.It says: Drive can't be written on. Please, remove write protection.According to problem solver there is nothing wrong with the memory stick, or HUBs. Memory stick's on utility program won't allow me to format it. Could it be so that it is jus broken (it's only 4 weeks old)?How do I remove write protection from the USB memory stick?
View 43 Replies View Related