I have several Administrator users. For each one I have set the username folder in Documents and Settings to allow network sharing including 'allow network users to change my files'. For all but one of the users this works fine and I can access and write files from another PC on the network. However in one case I can only read files and get the following message if I try to write: 'Cannot copy [filename]: Access is denied. Make sure the disk is not full or write-protected and that the file is not currently in use.' The settings appear to be the same for all users so I do not understand why I cannot write in this case. I've tried removing sharing then reapplying it, restarting PC, etc.
I have set up an XP-Pro classic-file-sharing network and want the client computers to share folders on the "server" computer . I have arranged a number groups and placed users into the groups. Each user is a member of GROUP_nnn and also of USER(group). I have shared c:SHARED_ROOT to allow all groups to have full-control on SHARED_ROOT, but for some reason access is denied to the sub-folders SUBF_A , SUBF_B and SUBF_C. As ADMIN, I have set the permissions to allow each user full-control in these sub-folders but I still get "access is denied" when a user tries to navigate into one of the sub folders. I removed INHERIT from the SHARED_ROOT and from each of the sub-folders.
Do I have to "share" the subfolders? Should I allow INHERIT on the subfolders?
I am trying to move files from my old XP computer (to be called OLD from now on) to my new Vista computer (to be called NEW) over my network. In some folders, there are some files that don't have the correct permissions for me to move them. I get this message on NEW when I try to copy them over: Destination Folder Access Denied You need permission to perform this action
The folder that these files are in on OLD has the correct permissions set, but for some reason some, not all, of the files within it have not inherited the correct permissions level. I can't figure out how to change the permissions level of these individual files. When I right-click on the problematic files in OLD, I do not see a Security tab.
I have tried several times to install XP SP3 on my DELL Inspiron 6000, XP SP2 and get and ?Access Denied? error. I understand that this occurs if one or more registry keys are restricted so that the software cannot alter them. I have retired installing SP3 after disabling both Zone Alarm and AVG antivirus programs w/o success. (do they need to be uninstalled?) I also understand that there is a way to reset registry and file permissions, but I am afraid that this would be beyond my comfort level. From the installation log, the first major logged failure is: 846.266: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2 --- does this have any meaning. So far, these attempts have not changed the computers functionality, however, I am not able to make the restore function work.
A thread that may have addressed this problem with an update to XP professional has unfortunately closed so I have to ask it about it again. I have automatic update selected and on one occasion when shutting down, the system went into update mode. After two hours it was still chuntering away so I rebooted. Next I find 80 folders on my C-drive with long alpha-numeric names containg a mixture of Word and other files. They seem to have something to do with the Microsoft update. When I try to delete them I get a message denying me access to aspnet.msp and saying this file, and consequently none of the other newly-arrived folders, can be deleted. I tried a systm restore by that failed. I tried a restart in safe mode but access to deletion was still denied. I eventually installed the latest .Net Frame 3.5(?) but these files are still there. I would be grateful for advice or how to remove these folders and files.
I seem to be having trouble with both of my PC's (dell dim 2400's with XP home) accessing the Windows Update site. I can never get on and get the usual page suggesting to try later or try downloading manually, which I can't do either. None of my System Restore points work (on either one)! Also, our DSL connection is working fine, as for as IE6 goes. (I can get Google, Yahoo, Bestbuy.com, ect.) I can't access the msn web-site either and Outlook Express 2003 hangs during the receiving part. I've tried Trend-Micro's Housecall and it cleaned several trojans, but I still have the same problems. I've never experienced this "Denial of Service" attacks.
Recently I've been denied access to some programs on this computer (Win XP Pro) which are readily accessible on my 2nd computer (Win. 98 SE). The only clue I have is a statement at the bottom of the screen (preceded by an S encapsulated in a red ring) which reads: JavaScript Currently Forbidden [<script>] [J+F+P:O]. However, in going to Tools, Options, Content, I find checks in front of both "Enable Java" and Enable JavaScript".
I have had Windows XP on my computer for 3 years, during that time I have had no problems with updates. A couple of days ago updates were running when I got the following message box. Service pack 3 setup. Access denied1! Microsoft will now un-install the current updates. At this point I was in a hurry to leave and shut off my computer thinking that when I started up again, the updates would resume their activity.......
I'm trying to obtain write access to a shared folder on my computer via the following command:code: C:Documents and SettingsXXX>net use x: \127.0.0.1docs /u:XXXThe command completed successfully.If I go to My Computer > X: (Where X is the new network drive) I have read access to the files. However, I do not have write access. (For example, if I try to create a new folder)If I'm logged on as 'XXX', which is the user whom the folder belongs to, why do I not have write access to the folder when accessing it as a network drive?I am able to write to the folder if I go to C:Documents and SettingsXXX.docs but not through X:...
I'm trying to use iTunes with my new ipod mini, but the My Music folder on my computer wont grant me access to write anything to it, or alter anything in it and I'm not sure why? It asks me to check whether it has full or write-protection, but it shouldnt have seeing as I am the only user on my computer? anyone be of assistance? its bugging me greatly!
I have a cd burner and xp and was wandering how can i record a movie file that is on a file sharing program what type of recording cd do i use i don't have a dvd burner.
I cannot install new applications on my WinXP HE. I've tried 10 or more and all give me a similar problem: error during install. some say, that they do not have write access to "program files" dir, but that's nonsense, since the installer installs the directory and some files already.
Windows XP Home SP2 account is an Administrator and I just installed a FPS game and I can't run that game because it produces an error saying that the games EXE folder needs to writable but when i try to make it writable windows tells me Access Denied. How do I correct this so I can play my game? Also, of the files and folder it DOES let me change the change doesn't actually happen it looks like it does but it doesn't.
Unfortunatly, a major thunderstorm passed thru my area and my computer was shut down hard and when I brought it up Windows was trashed, missing system files, some noise about disk-drive errors, etc. So I had to install Windows on another drive on the system. I can copy files from anywhere on the drive to the new windows drive except for "my documents" WEHRE OF COURSE Visual Studio Projects, Word documents, IPod, etc, everything, my important stuff is being kept being kept. The message I get is "Access is denied"
When I bring the system up in Safe Mode with networking and look at the security permission tab for that folder I see that my SID Is not there. When I try and add it (my user ID) it validates it and it looks like I can now have access to it, great, but when I click apply the response is "media is write protected" cannot apply permission changes. When I try and copy a file from my new windows drive to the original I get the message Drive is write protected
Try to defrag it from new windows - same message Try to repair it from new windows - same message
Can anyone tell me where I could find this media write protect switch and where to change it. Windows XP, NTFS all drives, SCSI
I have a couple Desktop PC's and a notebook PC. Both run winXP and I have all setup in a workgroup called HOME. From the notebook, I can see the main desktop PC I want to access but whenever I try and open it, expand the tree, I get an error: "xxxx is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Access is denied."
But I have set the network sharing and security permissions on the c:drive on the desktop PC in question to allow for access and files to be changed by other users on the network. If I've set the permissions, and the computer appears on the list of network computers in the my network places on the notebook PC, why I am being told that I don't have access permission? Its feels like an XP bug or something...I can access my other PC on the network from the notebook PC just fine - add more network places from that PC on the notebook etc. But I cannot do this on the second desktop PC even with full access permissions granted.
i have three hard drives : 1 Hitachi 250 GB Sata 2 on Nvidia Controller 2 Samsung 80 GB Sata in RAID O on Silicon Controller 1. the problem is when i boot into windows the LAN connection (two small monitors in the taskbar) takes atleast 10 minutes to show !! and theother problem is that until tht two monitors dnt appear i dnt get any reply frm right clicking any of the drives to see their properties and frm My Computer too, but as soon as the two small monitors come all the properties just pop up.
2. Sometimes suddenly in between Windows shows Write Delayed Failed Error only on the Raid Drives and i cnt access them afterwards,restarting solves the problem tho but jst for sumtime.
I have Xp pro workstation that i set up as a server to share files and folders. I grant specific users both the shared permissions and advanced permissions. they can see the folder and access the folders. but they cannot modify them. It says "access denied". I verified that the permissions were not propogating from the parent folder also. Everything that i see says it should work, but it doesnt. iThe only thing i got to work was giving the user full rights to the above folder..which is for all to share but not to modify.
We have a 6 user office (Mac/Windows) networked with Workgroup. One of the computers doubles as a desktop for the secretary and file server. The computer runs Windows XP Pro. This computer shares a folder and everyone can access it. I need to restrict access to this folder or a subfolder.I have used Administrative Tools to setup users and groups. I can't find a way to setup privileges and restrict access to a folder depending on the user.
i would like to know if there's a good place to learn about makingbatch file because i don't know about the syntax. I only program in c,delphi and Java.What i would like to know is if it's possible to do a "while", "if"(Conditions) and "read/write" text files so i can do a several testlike ping few computer in my buisness and be sure that they are wellconnected by creating a file that after it read the name of the computer it will ping and it pings it, write a file with the name of this computer with a "ok" next to it if it worked and "Not connected" if it can't ping it!
I have an XP machine that I'm trying to setup as a fileserver, but when I go into permissions, the only thing that shows up is the local machine, not the domain or any of it's computers.
-Is the computer connected to the domain: Yes.
-Can the computer ping other computers: Yes.
-Can the computer access other network shares? Yes.
I am trying to set up a shared folder on an XP pro machine and give permissions to only certain domain users. Problem is when I go to permissions, then "Add" then the only location I can see is the local computer - no option to see in the domain for users/computers on the domain. WIN2000 clients bring up the option of the local computer name and the domain no problem.
I have been experiencing a problem with sharing folders between two Windows XP Pro (SP2) Computers. I have searched the internet high and low for a solution, but i have not found one. This problem is driving me insane.When sharing folders between the two machines I AM able to access the folders and find them in "My Network Places". The problem is, while I am able to view the contents of all shared folders correctly, some files will not open and i will get a "you do not have appropriate permissions..." error. This is very random.... for example: say I have a shared folder with 30 files in it... I will be able to open and copy/move most of them, but there are several that will not open (when i try to launch these 'problem' files [zip, exe, wmv, whatever] I will get the error mentioned above). I dont understand how files in the same shared folder will act so differently.
I have setup the two external HDD's as share on the primary. I can see those HDD's through "My Network Places" on the secondary computer, but I get an error stating that I must see the administrator for access permissions. Is there a clean and safe way to share these 2 external hard drives from the secondary computer by leaving them connected to the primaru computer?
I have two machines with XP Pro SP2 installed. Prior to installing SP2 I was able to share folders and access the folders by specifying the machineshare name. Now I get an access denied (even though permissions is set to allow everyone full control) . I'm sure it has to do with the new security features included with SP2, I just can't figure out how to get it back without uninstalling the SP.
I am running WinXP on my Gateway pc and my Gateway Laptop. I know that printer and file sharing is an easy procedure. I have done it before and it worked. I know networking the two is a simple procedure and I did that too. My problems began when I switched from dial-up to satellite (Wildblue)internet. Don't know if that could have made a difference.Here is what I've tried so far. I first googled the problem and then took all the advise I could find, followed all the directions and nothing worked. I believe the two machines are networked because they are sharing the internet connection and when I did the 'ping' thing, each computer communicated with the other. I've done the printer sharing procedure over and over and over and when I go to the laptop, the printer on the desktop doesn't even show up. Both the pc and the laptop are on the same workgroup so that's not the problem.I
I am running WINXP Pro after having to do a clean install (Network card failed and corrupted something?) I have a bunch of files that I could not access, figured out I had to take permission of them as individual files (I could see in the folders, just not the open the files) I've had to keep doing this every time I move a hard drive to another PC. My question is how do I reset all the file sharing permissions so that anybody on any network/pc can access the files?
I want to share a folder on the network, giving just certain users the ability to read and write its files, but not other users. That's easy in Windows 2000, I right-click on the folder and choose Properties. On the Sharing tab I click the "Permissions" button and then choose the users who will be allowed to access its files. But in Windows XP the Sharing tab has no "Permissions" button.
Can file sharing be temporarily disabled in windows without affecting any other services. I guess what I am looking for is an "on or off " - switch" without having to disable file sharing the tradional way (rebooting etc). Is there a cmd.com option? Windows service etc. I would just really like to know how to turn it off. lets say for 5 minutes or 10 minutes at a time and easily resume all shared folders and services.
There are three seperate administrator user accounts on the copy of Windows Im using. I set up a user account password on one my account and it asked me if I wanted to disable file sharing or the ability for other accounts to view my files and I clicked yes. Now the other user accounts are unable to connect to the internet but I can connect under the account I put a password on.
I have a PC that had numerous defunct users, some from old defunct workgroups. I thought I'd consolidate. I moved a bunch of files and folders to a current users folder and deleted the defunct files and folders. I did this in Explore, loged in as Administrator, because these defunct users were from a previous defunct workgroups and did not show up in User Accounts/ControlPanel. As administrator I can read and wrtie to these files, but the user can't. I have marked these folders as shared and given permission to do everything to them, but the user that need them still can't write to them. As Administrator, I have assigned him to the powerUsers Group in the Users account/ControlPanel.
