When i have had my computer on for a long period of time it sudely comes up with a blue screen sayying. " windows has had to shut down your computer to prevent damage.Does anyone know how i can over come this? Do you need the technical infomration to resolve this .
I was recently trying to install Medieval Total War II onto my computer. I've had it installed before in the past, and it worked fine on my computer. I wanted to play it again, so when I went to install it it gave me the blue screen. It said:Quote: A problem has been detected and windows has been shut down to prevent damage to your computer.PAGE_FAULT_IN_NONPAGED_AREAIt then said something about disabling BIOS memory options such as caching or shadowing, etc. Then it had what I'm guessing is the error code:***STOP: 0x00000050 (0x46263D6, 0x00000000, 0x804ED967, 0x00000001)
Computer keeps crashing and giving me this error. does anyone know what it means? A problem has been detected and windows has been shut down to prevent further damage to your computer. DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time your seeing this error, restart the computer. If it appears again, follow these steps. Check new hardware or software is properly installed. If this is a new installation, ask the hardware and software manufactuer for any windows updates. If problem continues, disable or remove newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safemode to remove or disable components, restart, press f8 to select advanced startup options, then safe mode. TECHNICAL INFO *** STOP: 0X000000D1 ( 0X0000000A, 0X00000002, 0X00000000, 0XA9BF66EB) *** ipnat.sys - address a9bf663b base at a9bf000, datestamp 415b3714 Begining dump of physical memory Physical memory dumb complete Contact your system administration or tech support group for further assistance. Then another time it crashed it game me the same top message, but a differn't technical info string...which is: *** STOP: 0X000000D1 ( 0X4D0FC400, 0X00000002, 0X00000000X 0X4D0FC400.
My computer is not booting up. A while back while using my computer a blue screen popped up saying that windows encountered an error and that it would shut down to prevent damage. When that happened I simply restarted my computer and everything was fine. This happened one or two times later and everything was fine. Today it happened again and when I went to restart it it the blue screen popped up immediately after that. On the third time I went to restart it the computer just said boot failure and did nothing. Every time I try to restart it does the same thing. It will let me press f2 for the start up settings but when I press f8 for safe mode it does nothing.
My friend got a blue screen with error message saying; A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time. Technical information: *** STOP: 0x00000024 (0x00190203,0x82346610, 0xc0000102, 0x00000000)
She can't get into windows at all. When I turn on her computer it goes to a black screen that gives me a choice to boot in safe mode, safe mode with command prompt, last known good configuration. It is Windows XP Dell Laptop. I've tried them all, everytime it just goes straight to the same Blue Screen with same message. She doesnt have a recovery cd with her.
my laptop just keeps on crashing. everytime i open my laptop, when it goes to the part where windows is loading it will reboot again and again, ive tried to use saftey mode, it doesnt work as well, and somehow i came to this blue screen. A problem has been detected and windows has been shutdown to prevent damage DRVER_IRQL_NOT_LESS_OR_EQUAL if this is keeps on.etc STOP: 0x000000D1 (0xF44690000, 0x00000002, 0x00000000, 0xF45695QE) rdbss.sys - Address F4469000 base at F4453000, DateStamp 445b1f4b ipsec.sys - Address F456950E base at F4569000, DateStamp 41107ec3 before this happened, my pc keeps on scanning while i restart my computer properly, normally if i shutdown normally with pc it shouldnt have done the scanning part
right i have laptop the windows is not english so i want to install new windows by booting when i try to do that the following errie comes up p#Blue screen, white text, following message (in summary): A problem ha been detected and windows has been shut down to prevent damage to your computer. PAGE_FAULT_IN_NONPAGE_AREA Suggestions: Restart computer, if problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.Tech Info: ***STOP: 0x00000050 (0xBF32E9E4, 0x00000001, 0x805F87F4 0x00000002)[/COLOR][/COLOR]
I have an intel pentium4 system with 506 processor with intel motherboard (d101ggc) running on windows xp home with 512mb memory with one sata hard disk and two pat hard disks.Of late I have been having problems while shutting down after installing a software. the blue screen reads as follows."A problem has been detected and windows has been shut down to prevent damage to your
This problem just started yesterday, all because i think of when the power breaker went. It was in the middle of Shutting down windows and the power breaker went so my computer got shut off incorrectly. I started getting a memory dump screen when i tried to log into windows. So i put in the windows disk and did a Repair Install. that worked fine, I got it working and everything. Then I got a windows update installed from MS website... the whole Automatic Updare thing. Then I went to restart the comp cuz it was required, then my system could not load past the login screen, just always did a memory dump. so i went and tryed to Repair windows again, now i get this error
Im running Windows XP SP2 On a AMD Athlon 64 bit 3400Mhz Processor with a gig of ram. When i insert any disc into either the cd writer or dvd writer i get the blue screen of death saying the pc has been shut down to prevent damage to your computer. this one id doing my head right in
I am facing problem is starting my laptop.I get a blue screen saying windows have been shut down to avoid damage.And then it says 'UNMOUNTABLE_BOOT_VOLUME'and says this is caused due to new software or hardware installed. I have not installed any such application/software or hardware. So I dont know whats causing this problem.Can someone please help me at the earliest I am stuck badly.I need to work from home but my laptop is not working.
system is restarting automatically during the boot process. An error message is flashed briefly before it restarts: "A problem has been detected and windows has been shut down to prevent damage to your computer. "If this is the first time you've seen this stop error screen, restart your computer.If this screen appears again, follow these steps:"Run a system diagnostic utility suppied by your hardware manufacturer. In particular run a memory check, and check for faulty or mismatched memory. .
Try changing video adapters"Disable or remove any newly installed hardware and drivers. Disable or remove any newly installed software. If you need to use safe mode to remove components, restart your computer, press F8 to select Advanced startup options, and then select safe mode."Technical information: STOP: 0x0000007F (0x00000008, 0x80042000, 0x00000000, 0x00000000)"
I turned my computer on and after rebooting once, I pressed the F8 key and chose "disable reboot after system failure" and the blue screen said: A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error screen,restart your computer. If this screen appears again, follow these steps:Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated.Run CHKDSK /F to check for hard drive corruption, then restart your computer. STOP: 0X0000007B (0xF7B70528, 0xc0000034, 0x00000000, 0x00000000) I tried running it in safe mode but it never made it to the windows log-in
So first of all, I have a Dell Inspiron 600m with Windows XP Home SP3. Some background info that may or may not be relevant: I just had this OS installed though the computer is several years old (I had an ingenuine XP Pro before I cleared my C drive and installed a genuine XP Home). The XP installed was SP1 and then I did all the WUDs up to now I where I have SP3. Also, during that period, I had done a repair install because of some error I was getting following installation of a WUD. I don't know if any of that will be relevant at all, but just thought I should mention it.
I get this BSOD any time I unplug my laptop. It says, "A problem has been detected and windows has been shut down to prevent damage to your computer. .....
I have a ton of spyware and such on my computer and wanted to start fresh with a reformat. I put my XP disc in and tried to boot from the CD. When I tried to select a fresh partition I got the following error: A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you ahve seen this error screen, restart yoru computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as chaching or shadowing. If you need to use safe mode to remove or disable any components, restart your computer, press F8 to select Advanced Startup options, and then select safe mode. Technical Information:
*** STOP: 0x0000008E (0xC0000005, 0xF7418C13, 0xF6FD57E4, 0x00000000) *** setupdd.sys - Address F7418C13 base at F73EC000, Datestamp 41107c8f....
I have recently been getting a "blue screen of death" or windows crash screen and have been trying to get a solution. I was running a computer game several days ago and began to notice crackling in the speakers every now and then and became concerned. When out of no where the game crashes and I get a blue screen thats says stop: A problem has been detected and windows has been shut down to prevent damage to your computer and it goes on to sya a bunch of other crap and at the bottom the technical code for the error reads 0x0000009c (0x00000004 0x8053FAf0 0xB2000000 0x00070F0F. I decided the best way to go would be a re-installation of windows. But anyways.
My computer is restarting after 3 seconds when i am trying to start the computer. I am coming to the desktop and i can wait for 3 seconds and then suddenly, blue screen with white text and some red is showed to me for just one second. And the the computer restarts.
My laptop (the same one I've had for over two years) suddenly won't enter standby mode at all. When I close the laptop, it just hangs on the "entering standby mode" screen and drains the battery. When I open it up again, it shows that screen, and I have to press the power button to turn it off completely and start all over. When I try to put it in standby mode manually (by selecting it in the "turn off computer" options, the same thing happens. It seemingly started out of the blue and Every time I close it now, I have to completely shut it down, which is a pain.
I have an intel pentium4 system with 506 processor with intel motherboard (d101ggc) running on windows xp home with 512mb memory with one sata hard disk and two pat hard disks.Of late I have been having problems while shutting down after installing a software. the blue screen reads as follows."A problem has been detected and windows has been shut down to prevent damage to your computer. ****DRIVER_IRQL_NOT_LESS_OR_EQUA IF THIS IS THE FIRST TIME YOU'VE SEEN THIS STOP ERROR SCREEN, RESTAART YOUR COMPUTER. iF THIS SCREEN APPEAR AGAIN FOLLOW THESE STEPS.
My laptop won't even start windows in safe mode. I have the following blue screen:A problem has been detected and windows has been shut down to prevent damage to your computer.UNMOUNTABLE _BOOT_PROBLEM then a heap of stuff about checking the installation of any hardware or software. Technical information ***STOP: OXOOOOOOED (Ox8433BDD, OXCOOOOO9C,OXOOOOOOOO, OXOOOOOOOO)
It has an MSI board, Celeron D cedermill at 2.2ghz. Western Digital 160gb sata drive. I don't think any of that really matters, but heres the problem. When trying to install windows XP, after loading all the drivers it needs and it gets to 'starting windows' a blue screen comes up saying something like 'your system was turned off to prevent further damage. The hard drive works fine in another system, and so doesn't installing xp. I put the hard drive with xp installed. It tries to load, same screen. But it installs windows 2000 without glitch.
My dell 9100 got a virus (Trojan horse XP antivirus) I got it off but avg anti virus would not update could not change the screen saver it posted and began getting the dreaded blue death screen problem has been detected and windows has shut down to prevent damage. the stop message is 0x0000008e (0xc0000005, 0xf84ca245,oxf808d7b4,0x00000000). So i reformatted the hard drive and when I go to reload xp it does not recognize the dell xp/media edition dvd. I have an XP home edition so I tried it and it allows me to get to the point where you partition the drive and then i get the same error message
Before I explain my problem, I'd like to say that this seems to be a registry problem. I tried installing Taksi three days ago and got this message "The system administrator has set policies to prevent this installation." and it didn't really bother me, checking out different software is a hobby of mine, it's not like I actually I needed it. I thought it was the developer's fault. But anyways, now I realize can't install anything that is packaged as an msi. I'm an administrator on my computer, but not the root, sadly. (I received the computer as a gift from someone who had no use for the computer and had forgotten their password.) First, I installed Windows Installer 3.1 over my current installation to no avail. After awhile, I found this: http://support.microsoft.com/default...;en-us;Q227181
The problem I am having happens when I shut down my computer. I shut down using proper procedure: start menu, shut down, then yes. The problem comes up after windows finishes logging off and shutting down. A blue screen comes up and I�m forced to shut it down manually
I am getting a blue screen when I start my computer and as well as the error message in the title I get the below:*** STOP: 0x0000007E (0xC0000005, 0xFEB74D0, 0xF7B11FC8, OxF7B11CC4).
There's a very annoying program called dfg shutdown installed on my computer that shuuting down my computer at certain time.I can't uninstall that program.Is there a way to prevent my computer from shutting down?
Frequently am working and then get the "blue screen" filled with "if this is the first time you've gotten this screen. maybe virus, I don't think I have virus issues since I just repartitioned my whole HD and just loaded up a new copy of Windows XPSP2. Still I get this screen frequently. I also get iE6 wanting to shut down periodically (it says it's sorry........) and that is real frustrating.......plus it struggles with add-ons....maybe I should reinstall IE6.All this coupled with my inability to take up my NAV2004 program makes for a fun day. Compag not that old and as I say new XP.
About 3 days ago, I was on my computer and then it just automatically shut off, then went to a blue screen. I don't quite remember what the blue screen said, but it mention something about disabling BIOS and disableing/removing any new software I had downloaded. I didn't download ANY new software, and I dont really know much about computers, therefore don't know what to do about the BIOs. It also did mention something about disabling caching as well. I thought this was a one time thing, so I booted up my computer again, and it happened at 14 minutes later, and then again and again. I tried doing a last known good configuration while booting up the computer, but than a bigger problem started. My mouse stopped working. It's a wireless Microsoft mouse, and I used the other one that I had, and that didn't work either. It seemed that the adapter didn't want to connect with the mouse, therefore just sat there with the light blinking.
when I boot the computer it comes up with a black screen , white lettering and it says select startup system to start there are 2 choices ( help and Microsoft windows XP ) and there is a timer counting down allowing me 30 seconds to make a choice using the arrow keysIf I select windows XP the computer goes through the boot sequence and windows starts.If I let it time out or select the "help" It takes me to a second screen that has several options
My laptop gets the blue screen of death about five times a day. It comes up and shuts down my computer to fast for me to read what it says so I haven't a clue what the error message is, the only word I have been able to catch before it disapears is 'dumping' Is there a log somewhere on my computer system that I can pull up the error message or does someone here know what I'm referring to by that one word?