System Shutdown To Prevent Damage - Reformatting Harddrive
Aug 23, 2008
My dell 9100 got a virus (Trojan horse XP antivirus) I got it off but avg anti virus would not update could not change the screen saver it posted and began getting the dreaded blue death screen problem has been detected and windows has shut down to prevent damage. the stop message is 0x0000008e (0xc0000005, 0xf84ca245,oxf808d7b4,0x00000000). So i reformatted the hard drive and when I go to reload xp it does not recognize the dell xp/media edition dvd. I have an XP home edition so I tried it and it allows me to get to the point where you partition the drive and then i get the same error message
I have an intel pentium4 system with 506 processor with intel motherboard (d101ggc) running on windows xp home with 512mb memory with one sata hard disk and two pat hard disks.Of late I have been having problems while shutting down after installing a software. the blue screen reads as follows."A problem has been detected and windows has been shut down to prevent damage to your computer. ****DRIVER_IRQL_NOT_LESS_OR_EQUA IF THIS IS THE FIRST TIME YOU'VE SEEN THIS STOP ERROR SCREEN, RESTAART YOUR COMPUTER. iF THIS SCREEN APPEAR AGAIN FOLLOW THESE STEPS.
my laptop just keeps on crashing. everytime i open my laptop, when it goes to the part where windows is loading it will reboot again and again, ive tried to use saftey mode, it doesnt work as well, and somehow i came to this blue screen. A problem has been detected and windows has been shutdown to prevent damage DRVER_IRQL_NOT_LESS_OR_EQUAL if this is keeps on.etc STOP: 0x000000D1 (0xF44690000, 0x00000002, 0x00000000, 0xF45695QE) rdbss.sys - Address F4469000 base at F4453000, DateStamp 445b1f4b ipsec.sys - Address F456950E base at F4569000, DateStamp 41107ec3 before this happened, my pc keeps on scanning while i restart my computer properly, normally if i shutdown normally with pc it shouldnt have done the scanning part
I have an intel pentium4 system with 506 processor with intel motherboard (d101ggc) running on windows xp home with 512mb memory with one sata hard disk and two pat hard disks.Of late I have been having problems while shutting down after installing a software. the blue screen reads as follows."A problem has been detected and windows has been shut down to prevent damage to your
It has an MSI board, Celeron D cedermill at 2.2ghz. Western Digital 160gb sata drive. I don't think any of that really matters, but heres the problem. When trying to install windows XP, after loading all the drivers it needs and it gets to 'starting windows' a blue screen comes up saying something like 'your system was turned off to prevent further damage. The hard drive works fine in another system, and so doesn't installing xp. I put the hard drive with xp installed. It tries to load, same screen. But it installs windows 2000 without glitch.
system is restarting automatically during the boot process. An error message is flashed briefly before it restarts: "A problem has been detected and windows has been shut down to prevent damage to your computer. "If this is the first time you've seen this stop error screen, restart your computer.If this screen appears again, follow these steps:"Run a system diagnostic utility suppied by your hardware manufacturer. In particular run a memory check, and check for faulty or mismatched memory. .
Try changing video adapters"Disable or remove any newly installed hardware and drivers. Disable or remove any newly installed software. If you need to use safe mode to remove components, restart your computer, press F8 to select Advanced startup options, and then select safe mode."Technical information: STOP: 0x0000007F (0x00000008, 0x80042000, 0x00000000, 0x00000000)"
Before I explain my problem, I'd like to say that this seems to be a registry problem. I tried installing Taksi three days ago and got this message "The system administrator has set policies to prevent this installation." and it didn't really bother me, checking out different software is a hobby of mine, it's not like I actually I needed it. I thought it was the developer's fault. But anyways, now I realize can't install anything that is packaged as an msi. I'm an administrator on my computer, but not the root, sadly. (I received the computer as a gift from someone who had no use for the computer and had forgotten their password.) First, I installed Windows Installer 3.1 over my current installation to no avail. After awhile, I found this: http://support.microsoft.com/default...;en-us;Q227181
My laptop won't even start windows in safe mode. I have the following blue screen:A problem has been detected and windows has been shut down to prevent damage to your computer.UNMOUNTABLE _BOOT_PROBLEM then a heap of stuff about checking the installation of any hardware or software. Technical information ***STOP: OXOOOOOOED (Ox8433BDD, OXCOOOOO9C,OXOOOOOOOO, OXOOOOOOOO)
This problem just started yesterday, all because i think of when the power breaker went. It was in the middle of Shutting down windows and the power breaker went so my computer got shut off incorrectly. I started getting a memory dump screen when i tried to log into windows. So i put in the windows disk and did a Repair Install. that worked fine, I got it working and everything. Then I got a windows update installed from MS website... the whole Automatic Updare thing. Then I went to restart the comp cuz it was required, then my system could not load past the login screen, just always did a memory dump. so i went and tryed to Repair windows again, now i get this error
I have recently been getting a "blue screen of death" or windows crash screen and have been trying to get a solution. I was running a computer game several days ago and began to notice crackling in the speakers every now and then and became concerned. When out of no where the game crashes and I get a blue screen thats says stop: A problem has been detected and windows has been shut down to prevent damage to your computer and it goes on to sya a bunch of other crap and at the bottom the technical code for the error reads 0x0000009c (0x00000004 0x8053FAf0 0xB2000000 0x00070F0F. I decided the best way to go would be a re-installation of windows. But anyways.
I turned my computer on and after rebooting once, I pressed the F8 key and chose "disable reboot after system failure" and the blue screen said: A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error screen,restart your computer. If this screen appears again, follow these steps:Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated.Run CHKDSK /F to check for hard drive corruption, then restart your computer. STOP: 0X0000007B (0xF7B70528, 0xc0000034, 0x00000000, 0x00000000) I tried running it in safe mode but it never made it to the windows log-in
So first of all, I have a Dell Inspiron 600m with Windows XP Home SP3. Some background info that may or may not be relevant: I just had this OS installed though the computer is several years old (I had an ingenuine XP Pro before I cleared my C drive and installed a genuine XP Home). The XP installed was SP1 and then I did all the WUDs up to now I where I have SP3. Also, during that period, I had done a repair install because of some error I was getting following installation of a WUD. I don't know if any of that will be relevant at all, but just thought I should mention it.
I get this BSOD any time I unplug my laptop. It says, "A problem has been detected and windows has been shut down to prevent damage to your computer. .....
When i have had my computer on for a long period of time it sudely comes up with a blue screen sayying. " windows has had to shut down your computer to prevent damage.Does anyone know how i can over come this? Do you need the technical infomration to resolve this .
I have a ton of spyware and such on my computer and wanted to start fresh with a reformat. I put my XP disc in and tried to boot from the CD. When I tried to select a fresh partition I got the following error: A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you ahve seen this error screen, restart yoru computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as chaching or shadowing. If you need to use safe mode to remove or disable any components, restart your computer, press F8 to select Advanced Startup options, and then select safe mode. Technical Information:
*** STOP: 0x0000008E (0xC0000005, 0xF7418C13, 0xF6FD57E4, 0x00000000) *** setupdd.sys - Address F7418C13 base at F73EC000, Datestamp 41107c8f....
I was recently trying to install Medieval Total War II onto my computer. I've had it installed before in the past, and it worked fine on my computer. I wanted to play it again, so when I went to install it it gave me the blue screen. It said:Quote: A problem has been detected and windows has been shut down to prevent damage to your computer.PAGE_FAULT_IN_NONPAGED_AREAIt then said something about disabling BIOS memory options such as caching or shadowing, etc. Then it had what I'm guessing is the error code:***STOP: 0x00000050 (0x46263D6, 0x00000000, 0x804ED967, 0x00000001)
right i have laptop the windows is not english so i want to install new windows by booting when i try to do that the following errie comes up p#Blue screen, white text, following message (in summary): A problem ha been detected and windows has been shut down to prevent damage to your computer. PAGE_FAULT_IN_NONPAGE_AREA Suggestions: Restart computer, if problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.Tech Info: ***STOP: 0x00000050 (0xBF32E9E4, 0x00000001, 0x805F87F4 0x00000002)[/COLOR][/COLOR]
Computer keeps crashing and giving me this error. does anyone know what it means? A problem has been detected and windows has been shut down to prevent further damage to your computer. DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time your seeing this error, restart the computer. If it appears again, follow these steps. Check new hardware or software is properly installed. If this is a new installation, ask the hardware and software manufactuer for any windows updates. If problem continues, disable or remove newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safemode to remove or disable components, restart, press f8 to select advanced startup options, then safe mode. TECHNICAL INFO *** STOP: 0X000000D1 ( 0X0000000A, 0X00000002, 0X00000000, 0XA9BF66EB) *** ipnat.sys - address a9bf663b base at a9bf000, datestamp 415b3714 Begining dump of physical memory Physical memory dumb complete Contact your system administration or tech support group for further assistance. Then another time it crashed it game me the same top message, but a differn't technical info string...which is: *** STOP: 0X000000D1 ( 0X4D0FC400, 0X00000002, 0X00000000X 0X4D0FC400.
My computer is not booting up. A while back while using my computer a blue screen popped up saying that windows encountered an error and that it would shut down to prevent damage. When that happened I simply restarted my computer and everything was fine. This happened one or two times later and everything was fine. Today it happened again and when I went to restart it it the blue screen popped up immediately after that. On the third time I went to restart it the computer just said boot failure and did nothing. Every time I try to restart it does the same thing. It will let me press f2 for the start up settings but when I press f8 for safe mode it does nothing.
My friend got a blue screen with error message saying; A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time. Technical information: *** STOP: 0x00000024 (0x00190203,0x82346610, 0xc0000102, 0x00000000)
She can't get into windows at all. When I turn on her computer it goes to a black screen that gives me a choice to boot in safe mode, safe mode with command prompt, last known good configuration. It is Windows XP Dell Laptop. I've tried them all, everytime it just goes straight to the same Blue Screen with same message. She doesnt have a recovery cd with her.
i had done this many times before but have never stopped at an error like this from reformatting and installing a fresh xp on to a harddrive. I was trying to reformatt a brand new xp onto the harddrive cause for some reason the old one won't load up to desktop and it says system32/config is missing or something and needs reapir but i had try to repair several times and it freezes. So when i put the xp disc in it ask me to press f8 to agree and stuff to install windows XP just after that, it says at the bottom searching for pervious version of microsoft windows, i had restarted many times and tryed again but nothing ever happens it just says it. I even tryed leaving it to load for 14 hours and nothing happened..... im guessing something from the pervious version of windows was corrupted so it wouldnt install a fresh copy. But i really need u guys help on this. Can someone tell me how to fix this problem all i want is a fresh copy of xp on the harddrive and all the windows gone.
All of a sudden I am getting this message when trying to start my computer:Windows could not start the following file is missing or corrupt:<windows root>system 32hal.dlPlease re-install a copy of the above file I have tried to reboot the computer by using the CD to repair the damage. I insert the CD and try to start from there. It starts loading files, and then a window comes up with the following options:Windows XP home edition set up. The following list shows the existing partitions and unpartitioned space on this computerTo set up windows XP on the selected item, press ENTERTo create a partition in the unpartitioned space, press c To delete the selected partition,
when I try to start up windows I get the screen with the windows xp logo and the bar thingy that runs through the box. It looks something like this picture I made in MS Paint. Yeah, well you get the idea. I'm thinking it could have damaged one of the system files, something similar happened to my uncle. He was shutting down his computer and he all of a sudden pulled the power and his computer went dead because it was the exact wrong time to pull the power.
my pc hang and after waiting for sometimes for it to recover and nothing is happening i decided to push the reset button...now i cannot start my windows xp...at start up i have the message that windowssystem32configsystem is damage....the startup process advise me to run my boot cd and try to repair the problem using recovery console....since i have not kept a backup of system files on my pc...may i ask advice from our dear members if theres a backup somewhere in my windows directory..where i can copy and replace the damage files
Im running Windows XP SP2 On a AMD Athlon 64 bit 3400Mhz Processor with a gig of ram. When i insert any disc into either the cd writer or dvd writer i get the blue screen of death saying the pc has been shut down to prevent damage to your computer. this one id doing my head right in
I have a Mesh Laptop with XP which was running while a lightning storm was outside - it switched itself off.One of the problems it now has is that the clock runs at 30 times its normal speed - is there anyway to fix this ?
Can someone please help me with reformating my windows. i dont have the original windows cd because this computer was given to me and there is nothing that i want on there.
I know what to do but i am bit curious on the formatting bit. I have 2 hard drives, Harddrive "A" has all the window/program files as well as other programs like games and documents. Harddrive B is where i keep all my big files like videos and movies of course i want to format harddrive A but the thing is that harddrive is split in to 3 drives (C:, G:, F. I dont mind formating the c drive since it is all windows/program files but i dont really want to get rid of the G/F drive. I kno you can format the harddrive through the installation process of windows but i was wondering if it is possilbe to just to format the C: during that process or does it only format the whole harddrive
I reformatted my hard drive due to OS issues, I was running a trial version of Server 2003 along with XP Pro, and I had to get rid of Server 2003 because it was conflicting with XP Pro, and so the only way to do that was by reformatting both hard drives including XP Pro because Server 2003 was acting as the dominant OS, so I backed up all my ****, and reinstalled XP Pro, but now I get this hard drive problem that it says only 51 Gigs are remaining on a 250GB Hard drive, when the only thing installed on that hard drive is XP pro and maybe 15 applications, I tried using every program I can think of to find hidden files that equal a huge size but nothing shows up
My computer operated windows XP sp2, and have 3 hard drives conntected 1. HD 0 is 160 GB divided into 2 partiotions, one 20 GB containing the system the other 140 Gb containes data directories and film directories2. HD 1 is 120 Gb connected through mobile rack and also contains data directories and film directories3. HD 2 is 200 Gb connected through mobile rack and contains only film directories.Untill thursday night everything was perfect, but when i I opened my computer friday morning i found the following1. HD 0 second partition all film directories completly disappeared and the free space is 40 Gb instead of the original 50 Gb
I got a trojan that attached to my browser. I managed to get rid of it by system restore.A few days later I noticed I only had 127 GB of my 300GB harddrive showing.I did manage to find the missing space though Disk Management. It was showing 170GB as unallocated space. I named it E: and formatted it.It now shows in My Computer as New Volume E: When I open E:I get 2 folders, Recycler and System volume Information. SVI will not open. It gives me an error, ESystem Volume Information is not accessable, access is denied.I am trying to find a way to either resize E: to 1GB or smaller and move that 169 GB back to C: or get rid of E: altogether and put all the missing space back on C:
