my computer is running sluggish so i want to refresh it in pc settings where it says refresh pc without affecting files but i git a message that says insert media some files are missing when i put in mr win 7 or 8 or 8.1 dvd it says wrong media
View 1 RepliesI was cleaning up my start menu when accidentally i deleted the pc settings app and from that moment my pc settings panel does not open any longer.
I am referring to the win8 pc settings not to the classic control panel.
How to fix it without any refresh, reset, reinstall ..
My Dell Inspiron 3520 was going quite slow for unknown reasons so I decided to 'refresh' it using Windows advanced start-up setting. Since that time I have been unable to install Windows updates. Well, I can 'install' them, but they won't 'configure'. Once installed and 'configured' 100% I get this error message advising following reboot : "Failure to configure updates. Reverting changes". The laptop then stays paralysed on that screen.
This only started to happen AFTER I "refreshed" my laptop, which was running Windows 8.1 pretty-much problem-free, though a bit slowly, until a week ago. For now I have found a temporary 'fix' by disabling automatic updates; otherwise the laptop is constantly stuck on the "failure to configure updates" error page (because, obviously, it's automatically attempting to install updates). I have done all the standard troubleshooting, including running MS Fix It, Dell Dr ('My Dell' found no hardware issues), MS Malware removal and Mcafee anti-malware. All reported "no issues". I have been in command prompt and found no issues I even tried to 'refresh' the laptop again two more times. I have also spoken to two Windows "technicians" and allowed one of them to remotely access my laptop. He found no issues or "violations".
Obviously, the temporary 'fix' of turning off auto-updates isn't a long term solution, and 'refreshing' the laptop hasn't worked (it actually caused the issue). Running Windows 8 on Dell Inspiron 3520.
I'm guessing full format needed? - Would a format resolve the issue, since a 'refresh' caused it?
Now, here's the main problem. I don't think Windows 8 is picking up my partition, or is it? The laptop technically crashed in this situation.
Windows 8 is installed on C: Drive.
Before the crash, I was simply installing the latest AMD Catalyst and VISION Engine Control Panels whilst surfing Facebook. I'm not sure if the problem is directly linked to this or not. After the AMD stuff installed, it let me choose whether or not I want to reboot now or later, so I left it open until I could close Facebook, that's where troubles start.
The bar at the top of Chrome went invisible, and everything started flickering so I Alt Tabbed to the prompt for rebooting and hit reboot, and went to get a coffee.
I come back to my laptop expecting a login screen, but instead I'm greeted with a blue screen showing that winload.exe is either missing or damaged or something... so I've been trying everything in a command line from my install disc.
I've tried all the BCD backups, tried fix MBR, all that. One led to a problem where it said "The Boot Configuration Data (BCD I assume) is damaged" or something, but I had a backup so I renamed it back to BCD from BCD.OLD and now I'm back at the same winload.exe screen.
Refresh Your PC didn't work either, I'm getting a drive locked error, and yes I tried clearing attributes...
In Diskpart I've tried List Partition, and it showed my 100GB D: called Data, my System Recovery Partition of 100MB and my C: with 300 or so gigabytes, and it's extended, not primary.
I've tried setting it active, won't work.
I need this laptop for a lot of data and a resume I need to turn in for a job interview tomorrow.
How do you refresh files in 8.1 , If you got the upgrade over the net?
View 9 Replies View Relatedi used to use windows 8.1 for about a year and it was running well but lately my laptop became slow i used refresh PC and now i use windows 8 the problem here is that ican't upgrade to 8.1 unless i install all previous updates when i try to download them via windows update it just stucks at 0% i tried many times and tried windows update diagnostic and this was the result but still no response it's 0%
View 5 Replies View Related i have a new laptop (intel core i5 @ 2,6GHz, 4GB RAM) running windows 8 but because i had some issues such as:
store couldn't work right, task manager needed more than 2 minutes to open, shutting down needed more time than windows 7, i decided to make a refresh (the function of windows, you can use to reset them somehow without losing your files). It goes slow all the time, whenever i click anything. I've downloaded and installed all of the updates.
Notice that i have only the basic programs running and mcafee (i know it's "heavy" programme but i didn't have problem before the refresh)
I am having an issue with the amount of time that it takes for this to complete. I have heard that it can take a bit of time, but my laptop(Acer Aspire V3-771G-9809 Notebook Intel Core i7 3632QM (2.20GHz) 8GB Memory 1TB HDD NVIDIA GeForce GT 650M) has been stuck on 60% for over 24 hours. I am wondering if this is something to be concerned about or do you think everything will be okay?
View 4 Replies View RelatedI did a clean install of Windows 8.1 this week and have a fully updated installation now with minimal programs installed. My problem is this, I have my downloads folder set to sort files by date created, from newest to oldest so I can easily find my newest downloads as they should be at the top of the listing, but Windows explorer will not refresh the view if I have have explorer open, forcing me to either manually refresh it or go to another folder, then come back which updates the view. I never had to do this with the old win 8 pro installation and have tried resetting the folders several times but it still won't update by itself. I do have the latest version of Start8 installed, but that never caused a problem before.
View 3 Replies View RelatedDue to malware issue (snap.do) i want to refresh or reset my windows 8 (updated to 8.1). but on restart it gives the following error
The application or operating system couldn't be loaded because a required file is missing or contains error.
File:Windowssystem32winload.efi
Error code: 0xc000000f
I dont have any recovery media (disc or recovery drive).
"Microsoft has introduced two interesting and very useful features in Windows 8. Refresh PC and Reset PC are the two new features that fix all Windows issues by refreshing settings or resetting everything. These features allow you set your Windows 8 settings to their defaults, or reset Windows 8 to factory settings (original settings) by deleting data and installed apps.
Though most of us have the Windows 8 installation media, it’s always a good idea to make necessary changes to the default settings so that you can Reset Windows 8 without inserting the installation or recovery media."
How To Reset Or Refresh Windows 8 Without DVD ...
My desktop is completely blank after doing a refresh on windows 8.1 keeping my files and settings.
I have rebuilt the icon cache and run sfc /scannow
There is no restore point because the system is refreshed.
I was getting repeated blue screens of death. My laptop would crash and then restart only to crash again within 2 minutes, this just kept happening. So I figured I would just factory reset my laptop because it should have a recovery image on it since there is no optical drive. The factory reset failed at 64%, so I did it again and it failed in the exact spot again. Now the computer won't boot up. It says automatic repair which ends up failing and it gives me 2 options to either shut down or go through the advanced options. Is there anyway I can download windows 8 onto an external drive and install it like that? I have no clue what to do at this moment.
View 3 Replies View RelatedI'm currently running 8.1 and wish to effect a Refresh Recovery but when I enter disc when requested it states 'Not Valid'.
I purchased PC with Win 7Pro but in the time frame that allowed free upgrade to Win 8 Pro. I upgraded by downloading and installing - however I also purchased the Official upgrade discs 32/64 bit from Microsoft and received them some weeks after upgrade took place. I have since auto upgraded via App Store to 8.1 and I now wish to use Refresh Recovery but no matter which disc I insert Win7/8 it states invalid.
i have had to result in reinstailling windows 8 from scratch since neirther my saved system image worked and the refresh and restore options dont work.
I have had this system image problems happen twice, when i go to restore the image i get an error saying that the image was made on a different OS varient. E.g it was made of a 32bit system and im reimagaing a 64bit os. However this is not the case.
When i brought windows 8 i had the 32bit OS but i have upgraded to the 64bit OS and the reimage was done on a 64bit OS. I only have one PC so it nots likely that it was from a different PC.
Also when i go to the refresh option, i get an error saying that the drive is locked. how it was locked and how to unlocked it.
Just recently I was using my computer when an error appeared saying I had a drive error that needed to be fixed. I clicked the error in the system tray and then the computer restarted in order to fix the drive error. Well, I went into an "automatic repair" but then it froze on the "select your keyboard layout" screen. I then tried the "refresh your PC" option, but it wouldn't work saying that the hard drive was locked. I then tried to restore the PC to a restore point but it wouldn't let me do that either. As a last ditch resort I tried to use the "reset your PC" option which I gather is just a guided reformatting of the hard drive but it wouldn't let me do that either, saying that the required partition wasn't there. I took it into a PC repair place and they said the hard drive needs to be wiped, that the registry is corrupted or something along those lines. When booting from the windows 8 CD I tried to go into the installation menu and it won't even accept the product key on my package.
All I can really access is the command prompt. I guess I just need to reformat the hard drive and perform a clean install of windows. How to do this reformatting? I've never done it before and don't want to screw it up. I'm not worried about saving data on the computer, nothing really important on the drive that isn't already backed up on my laptop.
I've been driven to post by an issue with the Refresh Windows option since the update to 8.1 I cannot find a viable solution.
It appears to me that the Refresh Windows function is broken for those of us who upgraded from 8 to 8.1 for free via the start screen Windows Store.
When I tried to run Refresh on two of my 8.1 machines it failed, responding with the error message "files are missing, insert your recovery drive or installation media" or similar.
However, if you have upgraded via the Store, neither your original Windows 8 installation disk NOR a newly created recovery drive will work. If you try to use either, windows will tell you the media is invalid.
Research and fault finding indicates that the refresh function won't work because of a product key conflict.
From what I can tell this is because:
When you upgrade from 8 to 8.1 through the store you don't create an ISO or receive an updated product key.
If you have upgraded via the store, Refresh will tell you files are missing, as above. If you use your original 8 installation media as windows directs you to, it will fail because the product key is no longer valid.
If you create a new recovery drive on your updated 8.1 machine, again this will not work - Refresh will say the disk is invalid. Again I suspect this is a product key issue.
Trying to find and use a Windows product key on my machines since the upgrade is also a dead end. Control Panel/System and Security/System no longer displays a product key. Using a third party product key finder app may find another product key, however again this will be invalid.
Refresh was such a handy feature of 8!
I went to the recovery section. Advanced startup. After I clicked on refresh my screen went black..and it's been already 20 minutes and I don't see anything at all..only a black screen..
View 1 Replies View RelatedDoes not show up anywhere, device mgr etc. The only way I can see it is to adapt it to a usb connection.
View 9 Replies View RelatedI am currently running a 64 bit version of Windows 8 Pro with all available MS updates applied to it.
I have the need to change the name of one of the program groups that appear on the All Apps screen.
Let's say the group name is "Test". And I want to change the name to "Answer".
I navigate to the Desktop interface.
I go to: C:ProgramDataMicrosoftWindowsStart MenuPrograms
I rename the folder "Test" to "Answer"
I navigate back to the Metro interface.
I open the All Apps screen, but I still "see" the group named "Test".
Even if I log out and log back on. Or. if I log on as a different user.
Is there a way for me to force Windows 8 to update the All Apps screen ?
By the way ........
The above folder has a shortcut in it that points to Notepad.exe.
If I follow the same procedure (above) to rename the shortcut inside of the folder, the new shortcut name appears immediately when I return to the All Apps screen.
It's only the group name, that is not refreshing on the All Apps screen. (For some reason.)
I need to perform a System Refresh against once of my computers. However, when I try to launch the System Refresh option, it claims Windows is missing some files to do so and to insert a Windows installation media or recovery media to claim those files.
Here's the trip-up: I created recovery media on another Windows 8.1 computer and that STILL didn't work (said something about the media not being valid, despite being generated in the same OS). How do I get this to work?
I did do my homework on this issue and apparently having done the Windows 8.1 upgrade through the Windows Store strips out its ability to do a Refresh/Reset unless an ISO is present (of which you don't have one of course because of how you did the upgrade; chicken and egg problem right there). Two of my computers were done as Windows Store upgrades but my Ultrabook was not (for that I did a complicated jig that allowed me to keep all my installed Windows 8.1 Preview software while still moving to the Windows 8.1 final build). However it doesn't seem to matter as even the Ultrabook, despite its unique upgrade path, still fails to start a Refresh (should I want to do one there) so the problem is all over my Windows 8.1 machines.
I have an infected laptop. It has Windows 8 installed.
The problem I'm having is that NO programs will execute, I cannot load "Change PC Settings" so I can't refresh, reset or restore Windows. I have tried the method of holding down SHIFT and restart but to no avail.
I can't load programs from usb/cd before boot but I can in legacy mode and not uefi (not sure what difference that makes).
I have successfully scanned with Kaspersky Rescue Disk 10 in legacy mode but it found nothing? I've also manage to scan again using legacy mode with Malwarebytes but nothing.
I also cant load up the Control Panel, it loads but no icons are showing. Command prompt I can load but not in Administrator.
After updating from 8.0 to 8.1, I (like many others) lost the refresh option. Any way to get it back?
Windows 8.1 pro 32 bit
Is there a refresh function in Windows Explorer (Windows 8)??? I mean if you want to refresh the view? I don't seem to have it!
View 5 Replies View RelatedSpoiler: Image custom without software for recovering windows system
Refresh your PC Windows 8 without affecting your files
To avoid that your applications installed from disks or web site will be deleted, you can create a custom image control reimg.exe
Captures a new recovery image customized to the location specified by <repertoire>, and is defined as active recovery image.
Type the command : recimg.exe /createimage c:ImageSys
To display the path to the directory in which the active recovery image is stored, type:
Recimg.exe /showcurrent
I am trying to refresh my windows 8 ,but when i tried to do so it didn't work and i got this error "there was a problem refreshing your pc no changes made".
I tried to do Sfc /Scannow using Admin CMD but i got this
"Windows Resource Protection could not start the repair service."
Finally I tried to fix the services using "Dism /Online /Cleanup-Image /RestoreHealth"
And I got this error:
"DISM>>Error: 0x80004002
DISM failed. No operation was performed. For more information, review the log file. The DISM log file can be found at C:WindowsLogsDISMdism.log"
How to fix the windows or without reinstalling it ? I'm using Windows 8 i tried to upgrade to 8.1 but didnt work also.
My PC started off on Win 8 and I upgraded to Win 8.1 .
I want to do a completely fresh installation. I do not mind going back to Win 8 and redownloading Win 8.1 afterwards.
My problem is that when I go to PC Settings > "Remove everything and reinstall Windows", I get the error: "Insert media. Some files are missing. Your Windows installation or recovery media will provide these files."
I have a partition on my computer "HP_RECOVERY (F:)". It states 1.24 GB free of 10.6 GB. When I open it, it contains a folder called "Recovery" and "HP_WSD.dat" -- the .dat file is 1 KB. When I open the folder, it says that it is empty (hidden folders and files are set to be shown). If I look at the folder properties, it states that it contains 1 file, 2 folders. The size is 69 bytes.
I have not touched this recovery partition ever since I got this PC. I have, however, run a partition software before because I split my (C:) into (C: and D:). I do not know if this may have somehow corrupted my recovery partition.
What is the best way for me to quickly and cleanly format my PC without losing my registration key? I do not have a copy of Win 8 or Win 8.1 on a CD or USB.
I opened up cmd as admin and typed in "reagentc /info" and it output this:
Code: C:WINDOWSsystem32>reagentc /info Windows Recovery Environment (Windows RE) and system reset configurationInformation: Windows RE status: Enabled Windows RE location: ?GLOBALROOTdeviceharddisk0partition3RecoveryWindowsRE Boot Configuration Data (BCD) identifier: 8fc8db37-7d80-11e3-91ec-faa553f3f5b4 Recovery image location: Recovery image index: 0 Custom image location: Custom image index: 0REAGENTC.EXE: Operation Successful.
I did a PC Refresh and Reset and it's stuck at 1%
View 3 Replies View RelatedPC was running a little sluggish so decided to refresh it! I don't ever remember ever getting a bsod on Windows 8.
However it seems to be a regular thing since the refreshing the pc! it swill crash any anytime for any reason however I have yet to complete a full movie mpeg using the Handbrake software to reencode a movie file it will crash way before it is due to finish I've included the zipped Event log Admin.extv file ...
I recently purchased a Acer Desktop PC, well recently was in Feb/March of this year.
I tried to refresh the system. All worked fine until I rebooted the system. After I input my log on password in it a screen comes on saying that windows cannot be activated at this time. Please try later or input the product key.Also I cannot download any updates, I presume because of the activation.
The Pc was purchased New and had windows 8.1 installed with no installation disks or product keys in sight. After much searching I managed to get the product key, manually input it and Nada, Nothing! It would not accept it.
Refresh PC and Reset PC not in Windows Server 2012 ????
View 1 Replies View Related