Errors When Trying To Refresh PC - SFC / Scan Or Use DISM
Jan 15, 2014
I am trying to refresh my windows 8 ,but when i tried to do so it didn't work and i got this error "there was a problem refreshing your pc no changes made".
I tried to do Sfc /Scannow using Admin CMD but i got this
"Windows Resource Protection could not start the repair service."
Finally I tried to fix the services using "Dism /Online /Cleanup-Image /RestoreHealth"
And I got this error:
"DISM>>Error: 0x80004002
DISM failed. No operation was performed. For more information, review the log file. The DISM log file can be found at C:WindowsLogsDISMdism.log"
How to fix the windows or without reinstalling it ? I'm using Windows 8 i tried to upgrade to 8.1 but didnt work also.
I've recently purchased an MSI Dragon Edition. It started off the bat with top notch performance, no fps drops, no nothing, just pure perfection. Up until one day, it decided to completely crash on me, it got stuck on the loading BIOS screen and refused to redirect me to the log in page where i could access my desktop. After taking it to maintenance and formatting it from scratch, I've started noticing some subtle differences in comparison to the way it used to perform, performance drop, fps drop in game, slower powering on time, takes longer to shut down, not recognizing certain USB input such as my hard drive (not all the time).
About a week ago, while playing a game, my laptop crashed to the blue screen, with the error code displayed at the bottom telling me that the issue was "driver power state failure", after doing some research about the blue screen issue, people on other forums were discussing how the user should perform an SFD scan check from the CMD prompt.
After Scanning, my prompt informed me that I had multiple issues regarding my software files, "Windows Resource Protection found corrupt files but was unable to fix some of them."
From the Scan, there were in total 27 errors to report as shown below. I'm also currently fully, thoroughly scanning my laptop for any viruses using Avast! Antivirus, hoping it might resolve my issue.
Errors Found: 2014-05-03 05:57:37, Info CBS SQM: Failed to start upload with file pattern: C:WINDOWSservicingsqm*_std.sqm, flags: 0x2 [HRESULT = 0x80004005 - E_FAIL] 2014-05-03 05:57:37, Info CBS SQM: Failed to start standard sample upload. [HRESULT = 0x80004005 - E_FAIL]
I am trying to generate LangINI for: 1. Boot.WIM, 2. Install.WIM, 3. WinRE.WIM (inside Install.WIM) 4. and maybe for main distribution tree (burned into ISO).
Directories (with time chronology of their creation): ISO is extracted to C:ISO Boot.WIM is mounted to C:Mount Install.WIM is mounted to C:Mount (after Boot.WIM is unmounted) While Install.WIM is mounted, the WinRE.WIM is mounted to C:WinRE
My doubts: A. I don't believe it, because unpacked WIMs have directories like "Program Files" "Windows"... so "sources" (generated by /Gen-LangINI) directory looks inappropriate. IMHO distribution shouln'd be same as mounting point, but I just mounted vendor's boot.wim it ALSO has Program Files", "Windows"... AND "sources" inside. B. Also I am not sure about those two commands in Install.WIM. Isn't it overkill
Windows Update works.Everything below is done in an elevated command window.SFC /scannow fails. Error is "Windows Resource Protection found corrupt files but was unable to fix some of them."DISM /Online /Cleanup-Image /StartComponentCleanup completes without error.DISM /Online /Cleanup-Image /ScanHealth completes. Says corruption is repairable.DISM /Online /Cleanup-Image /RestoreHealth fails with error code 0x800f081f.DISM log is full of Chinese characters (attached).SFCFIX completes. Says there is no corruption.Tried above in safe mode w/ networking. SFC and DCIM fail to complete.Ran Microsoft Safety Scanner against computer. No infected files.Ran SFC and DISM 11 times.Compared SFC and DISM logs to a set on a working computer (no errors). Exceptions in faulty computer logs are also present in working computer logs.
When I run SFC, I get "Windows Resources did not find any integrity violations", however when I run DISM, I get the message "The component store is repairable" and "Could not locate source file" messages. This seems to be inconsistent - is there something I should do, or is it normal? Just trying to understand the results when I run these.
Recently I got problems when running SFC or DISM to repair my system. As far as I know it concerns the shortcuts in the folder Administrative Tools, there I changed under Properties the Run option to Maximised Windows and since then SFC and DISM have shown this error that the services are unable to download the proper source files (they admonish a mismatch I cannot correct).
I am running a Windows 8.1 Update 1 system without the Pro version, so I have no access to its exclusive features. I attach the corresponding log files after a run of DISM and SFC for more infos.
I want to install the .NET framework 3.5 through control panel and it ends with 0x800F0906. I also tried the DISM method and that one ends with 0x800F0081F (source could not be found).
I tried directly from Windows 8.1 DVD, copied sxs folder and tried it that way. I even downloaded some offline installers (from mydigitallife forums) and that too doesn't work. I also tried restarting the Windows Update service to no avail.
My log file from DISM:
Code: 2014-08-30 19:06:50, Info DISM PID=1676 TID=2520 Scratch directory set to 'C:UsersWSAND_~1AppDataLocalTemp'. - CDISMManager::put_ScratchDir2014-08-30 19:06:50, Info DISM PID=1676 TID=2520 DismCore.dll version: 6.3.9600.17031 - CDISMManager::FinalConstruct2014-08-30 19:06:50, Info DISM PID=1676 TID=2520 Successfully loaded the ImageSession at "C:WINDOWSSystem32Dism" - CDISMManager::LoadLocalImageSession2014-08-30 19:06:50, Info
So I'm creating a Windows 8 image with custom software installed, but now i'm stuck on the next steps, I've captured the image but the below link send me in a bit of confusion on the next steps! With win 7 in the past I used to be able to just capture the image and replace the original boot.wim file. Windows 8 doesn't seem to want to let me me do that. it will boot to install but a licence key field appears and doesn't like any licence I use (VLK by the way) What steps should I try and follow next?
Used the uninstall all Metro applications tricks to remove everything a few weeks ago. I wanted to add the store back temporarily but cannot figure out the DISM command to do so. I know it would be dism /online /add-package /packagepath: but then... I just can't figure out the correct path for `Microsoft-Windows-Store-Client-Package`.
After updating to 8.1u1, i'm running "dism /online /cleanup-image /restorehealth" and I get the following:
C:WindowsLogsDISM>dism /online /cleanup-image /restorehealth Deployment Image Servicing and Management tool Version: 6.3.9600.17031 Image Version: 6.3.9600.17031 [==========================100.0%==========================] The restore operation failed. Either the repair source was not found or the comp onent store cannot be repaired. Error: 0x800f081f DISM failed. No operation was performed. For more information, review the log file. The DISM log file can be found at C:WindowsLogsDISMdism.log
is this something I can repair from my original 8.1 Pro ISO, either as ISO or extracted? The setup event logs mentions 3 errors, so presumably this is the issue.
I have been trying to change my language all day but I cant seem to execute the command "dism /Online /Add-Package /PackagePath:C:lp.cab" in my command prompt. I get the above error. I have downloaded the language pack and put it in my root C drive and renamed it ip.cab
I have a desktop computer running Windows 8.1 Pro 64-bit. My computer suffered from an improper shutdown during a power outage. I am getting multiple error messages on logging in, and the sfc /scannow command shows several corrupt files, including msvcr80.dll and multiple others, preventing programs like Microsoft Word from running properly.
I am getting the message after running sfc /scannow in an elevated command prompt that Windows Resource Protection found corrupt files but was unable to fix some of them.
Details are included in the CBS.Log %WinDir%LogsCBSCBS.log. I used the findstr /c:"[SR]" %windir%LogsCBSCBS.log >"%userprofile%Desktopsfcdetails.txt" command to get this log outputted to a sfcdetails.txt log, and it shows which files are corrupt.
I then decided to turn to DISM, in an elevated command prompt, to ensure the component store was good, so that SFC can fix the files. This is where I am getting lost.
Dism /Online /Cleanup-Image /CheckHealth states that: The component store is repairable. However, when I run Dism /Online /Cleanup-Image /RestoreHealth , I am told (after some minutes of it running) that DISM failed, no operation was taken, with an error code of 0x80240021.
Looking at the dism.log file, I am seeing a very long log. These are the initial lines:
[2344] Caller did not request sparse mount [2344] Mounting new image. Wim: [?GLOBALROOTdeviceharddisk0partition1RecoveryWindowsREWinre.wim] Image Index: [1] Mount Path: [C:WINDOWSTEMP35f47719-b059-4f12-b5ee-101b2768bade]
[Code] .....
From what I can make, some file name or directory is incorrect? I have attached my dism.log file (saved as a .doc file for attachment purposes), my sfcdetails.txt log (obtained from the sfc /scannow function), and a screenshot of the Repair-WindowsImage -Online -RestoreHealth error message when I run it in PowerShell. How I can run DISM correctly to fix my component store.
How do I scan from a Sharp mx-m362n to a user's computer on the same network domain? Nothing in the operation manual shows how to perform a scan from the machine's control panel
Why does Windows Defender want to scan my PC so often? I have it scheduled to scan daily at about 2:30 AM. Sometimes after about 4 hours it says I need to scan.
I have 3 viruses detected on my last full PC scan which was moments ago.
Viruses and Trojans Quarantined: Artemis!7F706C6E8821 ^ This code cannot be found on the Mcafee website. ^ This code was given when the scan was finished, this is the code for the trojan, virus I have?
Scanning device is an HP Photosmart All in One HP 2575. i first installed it as an USB device and Windows Fax and Scan recognized it and scanned nicely. I then installed it as a network device and WFS would not recognize it as a scanning device when I unplugged the USB cable. It prints just fine but will not scan.
For some odd reason WD keeps telling me I need to do a scan (it's in orange in WD) even though I do a scan everyday via the Task Scheduler. After any kind of scan it resets itself (I don't need to scan, green in color). Some time period later it tells me a scan is needed.
Is there some option that controls how often WD tells you to do a scan?
This started happening about a week or so ago. I don't have anything running on my system that IMO is doing this.
When I turn on my Toshiba Satellite laptop, it does not see my i-phone hotspot. Wi-Fi status says "No Wi-Fi connections available". I always have to turn the hotspot off and then back on after the laptop is up and running for the laptop to find it. This does not happen with my desktop. It sees the i-phone hotspot without the need to cycle the hotspot off and back on, so I'm thinking that it has to do with the Toshiba rather than the i-phone. Both laptop and desktop are running Windows 8. Not a big problem, but I thought some one may know of a setting which I need to change.
I need to email scanned copies of different things. I can scan them ok, but I am having a hard time emailing them. I have tried setting up my gmail account in the scan setting window with no luck. With another program (paper port) I could just drag the file into the email - this won't work in the windows fax and scan program.
I have my HP 8500 Pro set up to print, but I cannot scan. Any word on how to do this? When I went to scan/fax, it says that I have no scanner hooked up.
Today I've tried doing a Chkdsk scan on my primary drive. Through the console, I entered this line to start the process on a re-boot 'chkdsk /f /r c:'.
I afterwards left it to do it's work for the next 1 and half hours '6:40-8:10pm', during this time I went to check on the progress of the scan and what I saw was that it was only '10%' into completion, this confused me greatly as previous computers that I have owned would atleast be around 70, or 80% percent completed, so not knowing what to do, I did a cold-boot.
From what I can tell, no visible damage has afflicted said the drive I did the chkdsk scan process on, but I would still very much like to know why my scan is hanging.
My computer freezes every time I look for hardware changes in device manager. First time I got the BSOD (CLOCK_WATCHDOG_TIMEOUT) was when i tried to reinstall my on-board LAN card. Since then every time i open device manager and look for hardware changes it freezes on me. At the begining i thought was a problem with my motherboard , but I sent it back to ASUS and they said there was nothing wrong with it. Have tried reinstalling windows several times without any success. Other than that, the computer is working perfectly.
This are my computer specs:
*Windows: Windows 8.1 Enterprise x64. *CPU Info: Intel Core i7-3770K Quad-Core Processor 3.5 GHz 8 MB Cache LGA 1155. *Memory (RAM): Corsair Vengeance Red 32GB (2x8GB) DDR3 1600 MHz. *Case: Thermaltake Level 10 GT VN10001W2N Full Tower Case. *Mother Board: ASUS Maximus V FORMULA LGA 1155 Intel Z77 Extended ATX DDR3 2800 PCIe 3.0 HDMI SupremeFX IV Audio Motherboard. *Cooling System: Corsair Hydro Series Extreme Performance Liquid CPU Cooler H100i. Power Supply: Cooler Master Silent Pro M - 1000W 80 PLUS Bronze Power Supply with Modular Cables. *Sound Card: Speakers (SRS HD Audio Lab) | Realtek Digital Output | NVIDIA High Definition Audio Output. *Display Adapters: EVGA GeForce GTX 660 SUPERCLOCKED 2048MB GDDR5 DVI HDMI DP Graphics Card. *Monitors: View Sonic VX2770SMH-LED 27-Inch IPS LED (Frameless Design, Full HD 1080p, 30M:1 DCR, HDMI/DVI/VGA) | Screen Resolution 1920 X 1080 - 32 bit. *Network Adapters: MS Hosted Network Virtual Adapter | Bluetooth Device (Personal Area Network) | Microsoft Wi-Fi Direct Virtual Adapter | Broadcom 802.11n Network Adapter | Intel(R) 82579V Gigabit Network Connection. *Ports: 15x USB 2.0 | 6x USB 3.0 | 2x eSATA | Rosewill 74-In-1 3.5-Inch Internal Card Reader | Syba USB 3.0 External 2 Port. *CD / DVD Drives: 5 (2x Lite-On Super AllWrite 24X SATA DVD+/-RW Dual Layer Drive, Lite-On LightScribe 24X SATA DVD+/-RW DL Drive, LITE-ON Black 12X BD-R 2X BD-RE 16X DVD+R 12X DVD-RAM 8X BD-ROM SATA 12X Blu-ray Burner with Blu-ray 3D Feature) *Mouse: Logitech M705 16 Button Wheel Mouse with a 3M Precise Optical Mouse Surface. *Keyboard: Logitech MK710 Wireless Ergonomic Desktop Keyboard. *Touchpad: Logitech Touchpad T650 with Windows 8 Multi-Touch Navigation. *Primary Hard Disks: C: SanDisk Ultra Plus SSD 256 GB SATA 6.0 Gbps 2.5-Inch Solid State Drive. *Secondary Hard Disks: D: WD Caviar Black 2 TB SATA III 7200 RPM 64 MB Cache.
I tried to get the dump files from the BSOD but i havent get it since the last time i reinstall the system. When it freezes i can get the BSOD right away, sometimes it can take more than 30 to come up after it freezes.
This is everything i have connected to the computer. I dont know if this is a software or hardware related issue.
