Maintenance :: SFC And DISM Fail - Error 0x800f081f?
Feb 28, 2014
Windows Update works.Everything below is done in an elevated command window.SFC /scannow fails. Error is "Windows Resource Protection found corrupt files but was unable to fix some of them."DISM /Online /Cleanup-Image /StartComponentCleanup completes without error.DISM /Online /Cleanup-Image /ScanHealth completes. Says corruption is repairable.DISM /Online /Cleanup-Image /RestoreHealth fails with error code 0x800f081f.DISM log is full of Chinese characters (attached).SFCFIX completes. Says there is no corruption.Tried above in safe mode w/ networking. SFC and DCIM fail to complete.Ran Microsoft Safety Scanner against computer. No infected files.Ran SFC and DISM 11 times.Compared SFC and DISM logs to a set on a working computer (no errors). Exceptions in faulty computer logs are also present in working computer logs.
After updating to 8.1u1, i'm running "dism /online /cleanup-image /restorehealth" and I get the following:
C:WindowsLogsDISM>dism /online /cleanup-image /restorehealth Deployment Image Servicing and Management tool Version: 6.3.9600.17031 Image Version: 6.3.9600.17031 [==========================100.0%==========================] The restore operation failed. Either the repair source was not found or the comp onent store cannot be repaired. Error: 0x800f081f DISM failed. No operation was performed. For more information, review the log file. The DISM log file can be found at C:WindowsLogsDISMdism.log
is this something I can repair from my original 8.1 Pro ISO, either as ISO or extracted? The setup event logs mentions 3 errors, so presumably this is the issue.
I have a desktop computer running Windows 8.1 Pro 64-bit. My computer suffered from an improper shutdown during a power outage. I am getting multiple error messages on logging in, and the sfc /scannow command shows several corrupt files, including msvcr80.dll and multiple others, preventing programs like Microsoft Word from running properly.
I am getting the message after running sfc /scannow in an elevated command prompt that Windows Resource Protection found corrupt files but was unable to fix some of them.
Details are included in the CBS.Log %WinDir%LogsCBSCBS.log. I used the findstr /c:"[SR]" %windir%LogsCBSCBS.log >"%userprofile%Desktopsfcdetails.txt" command to get this log outputted to a sfcdetails.txt log, and it shows which files are corrupt.
I then decided to turn to DISM, in an elevated command prompt, to ensure the component store was good, so that SFC can fix the files. This is where I am getting lost.
Dism /Online /Cleanup-Image /CheckHealth states that: The component store is repairable. However, when I run Dism /Online /Cleanup-Image /RestoreHealth , I am told (after some minutes of it running) that DISM failed, no operation was taken, with an error code of 0x80240021.
Looking at the dism.log file, I am seeing a very long log. These are the initial lines:
[2344] Caller did not request sparse mount [2344] Mounting new image. Wim: [?GLOBALROOTdeviceharddisk0partition1RecoveryWindowsREWinre.wim] Image Index: [1] Mount Path: [C:WINDOWSTEMP35f47719-b059-4f12-b5ee-101b2768bade]
[Code] .....
From what I can make, some file name or directory is incorrect? I have attached my dism.log file (saved as a .doc file for attachment purposes), my sfcdetails.txt log (obtained from the sfc /scannow function), and a screenshot of the Repair-WindowsImage -Online -RestoreHealth error message when I run it in PowerShell. How I can run DISM correctly to fix my component store.
Recently I have downloaded a few things that require the .NET framework 3.5. When I go to download/ install this, it moves realy fast, then stops and says: "Windows couldn't complete the requested changes" with the error code '0x800F081F'. I have been trying to do this for weeks now, and keep getting this error.
Some things to note: I downloaded Windows 8 (Pro, 64) My computer had a problem and I had to refresh it.
I have been trying to change my language all day but I cant seem to execute the command "dism /Online /Add-Package /PackagePath:C:lp.cab" in my command prompt. I get the above error. I have downloaded the language pack and put it in my root C drive and renamed it ip.cab
When I run SFC, I get "Windows Resources did not find any integrity violations", however when I run DISM, I get the message "The component store is repairable" and "Could not locate source file" messages. This seems to be inconsistent - is there something I should do, or is it normal? Just trying to understand the results when I run these.
Recently I got problems when running SFC or DISM to repair my system. As far as I know it concerns the shortcuts in the folder Administrative Tools, there I changed under Properties the Run option to Maximised Windows and since then SFC and DISM have shown this error that the services are unable to download the proper source files (they admonish a mismatch I cannot correct).
I am running a Windows 8.1 Update 1 system without the Pro version, so I have no access to its exclusive features. I attach the corresponding log files after a run of DISM and SFC for more infos.
So lately the system time on my computer wasn't telling the right time, and every time I changed it, it would just change back. So I changed the CMOS battery to what I assumed to be an identical battery, and Windows was unable to start and said I had to system restore. So I took out the old battery and put the new one in and the same thing happened. When it prompts me to restore and I click on it, I just get the black screen with the blue windows icon, minus the loading icon. What should I do?
I am trying to generate LangINI for: 1. Boot.WIM, 2. Install.WIM, 3. WinRE.WIM (inside Install.WIM) 4. and maybe for main distribution tree (burned into ISO).
Directories (with time chronology of their creation): ISO is extracted to C:ISO Boot.WIM is mounted to C:Mount Install.WIM is mounted to C:Mount (after Boot.WIM is unmounted) While Install.WIM is mounted, the WinRE.WIM is mounted to C:WinRE
My doubts: A. I don't believe it, because unpacked WIMs have directories like "Program Files" "Windows"... so "sources" (generated by /Gen-LangINI) directory looks inappropriate. IMHO distribution shouln'd be same as mounting point, but I just mounted vendor's boot.wim it ALSO has Program Files", "Windows"... AND "sources" inside. B. Also I am not sure about those two commands in Install.WIM. Isn't it overkill
I am trying to refresh my windows 8 ,but when i tried to do so it didn't work and i got this error "there was a problem refreshing your pc no changes made".
I tried to do Sfc /Scannow using Admin CMD but i got this
"Windows Resource Protection could not start the repair service."
Finally I tried to fix the services using "Dism /Online /Cleanup-Image /RestoreHealth"
And I got this error:
"DISM>>Error: 0x80004002 DISM failed. No operation was performed. For more information, review the log file. The DISM log file can be found at C:WindowsLogsDISMdism.log"
How to fix the windows or without reinstalling it ? I'm using Windows 8 i tried to upgrade to 8.1 but didnt work also.
I want to install the .NET framework 3.5 through control panel and it ends with 0x800F0906. I also tried the DISM method and that one ends with 0x800F0081F (source could not be found).
I tried directly from Windows 8.1 DVD, copied sxs folder and tried it that way. I even downloaded some offline installers (from mydigitallife forums) and that too doesn't work. I also tried restarting the Windows Update service to no avail.
My log file from DISM:
Code: 2014-08-30 19:06:50, Info DISM PID=1676 TID=2520 Scratch directory set to 'C:UsersWSAND_~1AppDataLocalTemp'. - CDISMManager::put_ScratchDir2014-08-30 19:06:50, Info DISM PID=1676 TID=2520 DismCore.dll version: 6.3.9600.17031 - CDISMManager::FinalConstruct2014-08-30 19:06:50, Info DISM PID=1676 TID=2520 Successfully loaded the ImageSession at "C:WINDOWSSystem32Dism" - CDISMManager::LoadLocalImageSession2014-08-30 19:06:50, Info
So I'm creating a Windows 8 image with custom software installed, but now i'm stuck on the next steps, I've captured the image but the below link send me in a bit of confusion on the next steps! With win 7 in the past I used to be able to just capture the image and replace the original boot.wim file. Windows 8 doesn't seem to want to let me me do that. it will boot to install but a licence key field appears and doesn't like any licence I use (VLK by the way) What steps should I try and follow next?
Used the uninstall all Metro applications tricks to remove everything a few weeks ago. I wanted to add the store back temporarily but cannot figure out the DISM command to do so. I know it would be dism /online /add-package /packagepath: but then... I just can't figure out the correct path for `Microsoft-Windows-Store-Client-Package`.
The past week or so I have had a problem with updates for windows defender in win 8.1 failing to work. Is it from any of the last updates on patch Tuesday? or another problem. I can get the update from a windows site and install it from that but not from defender its self or windows update.
I'm trying to update my windows 8 to windows 8.1 on a HP Pavilion g7-2261sb.
However, after numerous trials, every time, the installation stops and says "failed to install. error code 0xc0000374". EDIT: I checked again and it comes after the "collecting data" part.
I've ran the update checker (compatibility), and that gave no problems or errors.
I know that Windows 8 doesn't come with the ability to read DVD movies, by default, but I was told it was as easy as installing a multimedia player like VLC, Media Player Classic Home Cinema or PotPlayer. Well, I tried all of them and everytime I insert a DVD movies, the multimedia software hangup when trying to read the DVD. What's up with my setup?
Since I installed W8 64x my networks drivers won't start at boot, therefore I have to disable the drivers via Device Manager and re-enable them in order to work. (see attachment for the only error I get - I don't know whether there is a log in another place?)
My programs that has yellow-blue shield like this fail to autostart at log-on or windows startup. I tried many ways: registry, put their shortcuts in startup folder, changed gpedit.msc so that they start on log-on... none of them works. This problem seems to affect only programs with that yellow-blue shield (whatever its name is).
I just install windows 8 using BIOS , but now i want to change it to UEFI boot. so i followed steps below
1.create and format a new FAT32 partition K:
2.my windows8 is in I: so , i use this command bcdboot i:windows /f all /s k: and succeeded.
3.i checked with the bootice about the BCD in my K: and found it indeed point to i:windows just like the picture below [URL]
4. and i restart, choose uefi boot in BIOS configuration and it showed like this: [URL]
5. i checked my k:/windows/system32/ , there is a winload.efi file... [URL]
The most strange thing is that i've copyed my winload.efi to other computer which is already in UEFI mode , and also i've copyed it in my virtual machine, it works fine! So my winload.efi should be OK.
Now that Windows 8 cannot be permanent activated with Windows Media Center Key and only KMS working for 180 days, tested this today so this is true only kms 180 days works. So is there any solution any other alternative for permanent activation of Windows 8 and 1 can install all Microsoft updates after permanent activation ....
For Windows 8 core and pro RTM and for Windows 8 Enterprise volume edition MSDN iso ....
