"Microsoft has introduced two interesting and very useful features in Windows 8. Refresh PC and Reset PC are the two new features that fix all Windows issues by refreshing settings or resetting everything. These features allow you set your Windows 8 settings to their defaults, or reset Windows 8 to factory settings (original settings) by deleting data and installed apps.
Though most of us have the Windows 8 installation media, it’s always a good idea to make necessary changes to the default settings so that you can Reset Windows 8 without inserting the installation or recovery media."
I need to perform a System Refresh against once of my computers. However, when I try to launch the System Refresh option, it claims Windows is missing some files to do so and to insert a Windows installation media or recovery media to claim those files.
Here's the trip-up: I created recovery media on another Windows 8.1 computer and that STILL didn't work (said something about the media not being valid, despite being generated in the same OS). How do I get this to work?
I did do my homework on this issue and apparently having done the Windows 8.1 upgrade through the Windows Store strips out its ability to do a Refresh/Reset unless an ISO is present (of which you don't have one of course because of how you did the upgrade; chicken and egg problem right there). Two of my computers were done as Windows Store upgrades but my Ultrabook was not (for that I did a complicated jig that allowed me to keep all my installed Windows 8.1 Preview software while still moving to the Windows 8.1 final build). However it doesn't seem to matter as even the Ultrabook, despite its unique upgrade path, still fails to start a Refresh (should I want to do one there) so the problem is all over my Windows 8.1 machines.
I installed Windows 8 Through my windows DVD and now want to make it so I don't need the Windows Installation Disk or any USB Recovery key. Is there any way to make a refresh AND reset partition and image.
Just recently I was using my computer when an error appeared saying I had a drive error that needed to be fixed. I clicked the error in the system tray and then the computer restarted in order to fix the drive error. Well, I went into an "automatic repair" but then it froze on the "select your keyboard layout" screen. I then tried the "refresh your PC" option, but it wouldn't work saying that the hard drive was locked. I then tried to restore the PC to a restore point but it wouldn't let me do that either. As a last ditch resort I tried to use the "reset your PC" option which I gather is just a guided reformatting of the hard drive but it wouldn't let me do that either, saying that the required partition wasn't there. I took it into a PC repair place and they said the hard drive needs to be wiped, that the registry is corrupted or something along those lines. When booting from the windows 8 CD I tried to go into the installation menu and it won't even accept the product key on my package.
All I can really access is the command prompt. I guess I just need to reformat the hard drive and perform a clean install of windows. How to do this reformatting? I've never done it before and don't want to screw it up. I'm not worried about saving data on the computer, nothing really important on the drive that isn't already backed up on my laptop.
I have an infected laptop. It has Windows 8 installed.
The problem I'm having is that NO programs will execute, I cannot load "Change PC Settings" so I can't refresh, reset or restore Windows. I have tried the method of holding down SHIFT and restart but to no avail.
I can't load programs from usb/cd before boot but I can in legacy mode and not uefi (not sure what difference that makes).
I have successfully scanned with Kaspersky Rescue Disk 10 in legacy mode but it found nothing? I've also manage to scan again using legacy mode with Malwarebytes but nothing.
I also cant load up the Control Panel, it loads but no icons are showing. Command prompt I can load but not in Administrator.
New Windows 8 Pro with WMC install to a new Intel SSD on an old Dell Inspiron 530. I got everything activated and working fine, and then I swapped the SSD for the old HDD to finish getting all my data. But when I swapped the SSD back in, I can no longer get Windows 8 to boot--it goes into automatic repair, but none of the options are available to me. Refresh won't work, reset won't work, I can't even get system restore to work (it shows me two restore points available, but it won't let me select them.)
This was a clean install, so it has the 350MB recovery partition. I believe the RAID is set properly (I have no straight up AHCI option in BIOS, but I installed Windows 8 under RAID [it shows "AHCI Bios enabled!" during POST], and remembered to change to IDE mode to boot the HDD, and back to RAID before trying to boot the SSD).
I've always been able to troubleshoot these sorts of problems under XP or 7, but I'm just not familiar with these Windows 8 processes (or SSDs/AHCI/RAID stuff) yet. I've got all the linux tools, Hirens, etc. available, and can verify that the files on the SSD appear to be fine. I could reinstall if necessary, but really don't want to have to deal with the upgrade and re-activating--and even if I do have to reinstall.
Have decided to take the plunge to reset my computer (because Windows Store would not open). Booted from the installation disk but cannot Reset or Refresh, I get "The drive where Windows is installed is locked. Unlock the drive and try again."
I've had a lot of trouble with my samsung laptop. The HDD has been replaced but I now cannot do a refresh or reset. I get the message"Some files are missing. Your Windows installation or recovery media will provide these files". The laptop came with Windows 8 installed so I do not have the installation discs. I can do a factory restore by pressing f4 on start up successfully but still shows the above message trying to refresh. What caused this and what can I do about it?
My PC fails to boot into Windows and launches Automatic Repair to attempt to repair Windows. When i try to refresh or reset alway get msg " there is a problem resetting your pc, no changes are made" My PC is preinstalled so no I don't have recovery CD/DVD Here pics
You have Windows 8 or Windows 8 Pro installed on your PC. Your PC fails to boot into Windows and launches Automatic Repair to attempt to repair Windows.
Automatic Repair is unable to repair your PC and you select "Advanced options". After selecting "Troubleshoot", you choose to either "Refresh your PC" or "Reset your PC".
In this scenario, recovery may fail and you are returned back to the main WinRE screen. This issue may occur if the System or Software registry hives have become damaged or corrupted.
To attempt to resolve this issue, follow the steps below. Following these steps should only be used if you are attempting to use the "Refresh your PC" or "Reset your PC" options in Windows RE because your system is in a non-bootable state.
-After Automatic Repair fails to repair your PC, select "Advanced options" and then "Troubleshoot". -Select "Advanced options" and then select "Command Prompt". -If prompted, enter in the password for the user name. -At the Command Prompt, go to the windowssystem32config folder by typing the following command: cd %windir%system32config. -Rename the System and Software registry hives to System.001 and Software.001 by using the following commands: ren system system.001 ren software software.001
I did all that but when I tried to rename the Software.001 file the system responds: "The process cannot access the file because it is being used by another process" ...
I tried to create a Ubuntu start up usb key so that i could maybe get in and rename the file but that presented more problems.
Using the sfc command, I found some corrupted windows files but it was unable to repair them... Is there any way I can repair the files without having to reset or refresh my computer and lose everything I installed?
I found something called DISM, but when I used it, it said unable to find source files or something... I found my recover partitions, but they don't have drive letters. Anything I can do?
i used to use windows 8.1 for about a year and it was running well but lately my laptop became slow i used refresh PC and now i use windows 8 the problem here is that ican't upgrade to 8.1 unless i install all previous updates when i try to download them via windows update it just stucks at 0% i tried many times and tried windows update diagnostic and this was the result but still no response it's 0%
i have a new laptop (intel core i5 @ 2,6GHz, 4GB RAM) running windows 8 but because i had some issues such as:
store couldn't work right, task manager needed more than 2 minutes to open, shutting down needed more time than windows 7, i decided to make a refresh (the function of windows, you can use to reset them somehow without losing your files). It goes slow all the time, whenever i click anything. I've downloaded and installed all of the updates.
Notice that i have only the basic programs running and mcafee (i know it's "heavy" programme but i didn't have problem before the refresh)
I am having an issue with the amount of time that it takes for this to complete. I have heard that it can take a bit of time, but my laptop(Acer Aspire V3-771G-9809 Notebook Intel Core i7 3632QM (2.20GHz) 8GB Memory 1TB HDD NVIDIA GeForce GT 650M) has been stuck on 60% for over 24 hours. I am wondering if this is something to be concerned about or do you think everything will be okay?
I was getting repeated blue screens of death. My laptop would crash and then restart only to crash again within 2 minutes, this just kept happening. So I figured I would just factory reset my laptop because it should have a recovery image on it since there is no optical drive. The factory reset failed at 64%, so I did it again and it failed in the exact spot again. Now the computer won't boot up. It says automatic repair which ends up failing and it gives me 2 options to either shut down or go through the advanced options. Is there anyway I can download windows 8 onto an external drive and install it like that? I have no clue what to do at this moment.
PC was running a little sluggish so decided to refresh it! I don't ever remember ever getting a bsod on Windows 8.
However it seems to be a regular thing since the refreshing the pc! it swill crash any anytime for any reason however I have yet to complete a full movie mpeg using the Handbrake software to reencode a movie file it will crash way before it is due to finish I've included the zipped Event log Admin.extv file ...
I recently purchased a Acer Desktop PC, well recently was in Feb/March of this year.
I tried to refresh the system. All worked fine until I rebooted the system. After I input my log on password in it a screen comes on saying that windows cannot be activated at this time. Please try later or input the product key.Also I cannot download any updates, I presume because of the activation.
The Pc was purchased New and had windows 8.1 installed with no installation disks or product keys in sight. After much searching I managed to get the product key, manually input it and Nada, Nothing! It would not accept it.
so about a month ago I needed to do a refresh on my Asus Laptop which had Windows 8.1 (64bit). I bought this computer back in September of 2013. It was a simple refresh that saved my files and such. The reason I had to refresh was for some odd unknown reason, League of Legends would not go to the login screen, as it would fail. I tried everything to fix that problem, and nothing worked. So, I did a refresh.
Now, I have Windows 8, and my updates wont install at all. I have tried to do a windows update repair and it doesn't fix all the problems, tried to do a clean boot install. Nothing works as of right now. My computer restarts every 2 days and fails.
"Failed Configuring Windows Updates - Reverting Changes" < something of that sort. Every time. I checked if any of the windows updates have gone through, and almost all of them have not.
I have a brand new Asus laptop, bought it about 3 weeks ago. After installing some windows updates I restarted the computer and it it would not boot. Keep getting a quick error message 0xc0000001 and restarts. I have tried booting into recovery and doing automatic repair, tried bootrec's /fixboot, /fixmbr, and /rebuildbcd and and get successfully completed but still does not boot in both secure and non-secure boot. I have done a refresh, which completes successfully, but still not booting. The USERS folder in c:Windows.old does not show any users, even though when I click advanced options in recovery it asks to choose a login and enter a password. I have also checked the USERS folder at c: and :cwindows. Remember I did a refresh and not a reset so my pics should still be their. How can i recover my pics and fix the damn boot.
I used the Windows 8 Refresh and like many others I seem to have lost all the important files. Where as I could simply connect my Camera and it would automatically connect now it does't . AVG, I Tunes, Abi all lost. How can I restore the automatic connection etc? I can't even use the tool bar AVForums when writing a message?
For some reason Windows 8 Pro keeps corrupting after installing updates i have used the DVD to refresh in the past but i can't boot into Windows so i can refresh without media ie copying install.wim to C drive
I'm dual booting Windows 8 Pro With Windows 7 VHD.