Windows 8.1 Will Not Enter S3
Mar 11, 2014
My computer is not hibernating after an upgrade to Windows 8.1:
C:WINDOWSsystem32>powercfg /a
The following sleep states are available on this system:
Standby (S1 S3)
Hibernate
Hybrid Sleep
Fast Startup
The following sleep states are not available on this system:
Standby (S2)
The system firmware does not support this standby state.
[Code] .....
Errors
USB Suspend:USB Device not Entering Selective Suspend. This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping. Device Name USB Root Hub Host Controller ID PCIVEN_1002&DEV_4396 Host Controller Location PCI bus 0, device 19, function 2 Device ID USBVID_1002&PID_4396 Port Path
[Code] .....
Warnings
Platform Timer Resolution:Platform Timer Resolution. The default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the timer resolution is increased, processor power management technologies may not be effective. The timer resolution may be increased due to multimedia playback or graphical animations. Current Timer Resolution (100ns units) 10000 Maximum Timer Period (100ns units) 156250
[Code] .....
Information
Platform Timer Resolution: Timer Request Stack. The stack of modules responsible for the lowest platform timer setting in this process. Requested Period 10000 Requesting Process ID 4252 Requesting Process Path DeviceHarddiskVolume2Program Files (x86)GoogleChromeApplicationchrome.exe Calling Module Stack DeviceHarddiskVolume2WindowsSysWOW64
tdll.dll DeviceHarddiskVolume2WindowsSysWOW64kernel32.dll DeviceHarddiskVolume2WindowsSysWOW64d3d9.dll
[Code] .....
It is hibernating now with those settings. It took another reboot for some reason.
View 2 Replies
ADVERTISEMENT
Nov 5, 2013
How to enter the safe mode in windows8.1. Do NOT tell me pressing F8 when PC starts up .OK?
View 9 Replies
View Related
Sep 15, 2014
i have windows 8
in the instruction of my university vpn . they said i should enter UCSTAFF in domain(look at the step 7 in this instruction) but this instruction is for windows 7 and i could not find any way to enter domain in windows 8.
View 7 Replies
View Related
Aug 12, 2012
I installed windows 8 release preview on my Samsung Slate yesterday. When it asked me to enter a password, I didn't and continued. After the installation was complete, the system asks me for a password. I press enter but it says the pw is incorrect so I tried all my old passwords but to no avail. I cannot reinstall it because I'm unable to change the boot order from bios to my 32GB USB thumb drive as it is not letting me.
View 3 Replies
View Related
Mar 5, 2014
My laptop (Latitude E6420) can't enter sleep mode either when I close the lid or select Sleep command from Start menu.It's a new hard drive with clean Windows 8.1 Pro.All latest drivers have been installed (downloaded right from Dell's site)
I tried to run powercfg /energy command as it's suggested on some web-site. It reported about 6 errors. First 5 of them are about USB suspend and the latest is about disabled PCI ASPM.Here you can download full report: [URL] .... Maybe I should re-install some drivers?
View 1 Replies
View Related
Nov 14, 2013
I would like to know how to enter the EFI Shell. After this, I would like to know also what is the command to "boot" partition with Windows 8.1 (not installation, but boot to install)
View 9 Replies
View Related
Jun 28, 2014
I've already used netplwiz and the box is not checked but I still have to sign in. I have two options...sign in with windows 8 or Microsoft passwords. I am the only user in the house... I don't want to have to put in a password every time I boot up. Is there another way?
View 1 Replies
View Related
Jan 18, 2013
Using Windows 8 Pro.I have tried all the various permutations to get into safe mode (ms config, start up options etc.).
This is what happens: I use MS Config or one of the other ways (tried them all!) to get into safe mode. The computer seems to be booting into safe mode when I get a blue screen (not BSOD) which pops up and very quickly disappears, and then the computer reboots normally (into Windows 8). The screen says something like 'Windows has encountered a problem and needs to restart'.
View 9 Replies
View Related
Dec 29, 2012
I recently upgraded from windows 7 to windows 8 pro. The install went well. During the post install I found that I could not use the numeric keys to enter numbers into my browser address bar. I tried all three browsers, Firefox, IE 10, and chrome. I tried a second keyboard with the same results. I verified that the system worked correctly at the OS level by entering numbers and special characters into notepad. There are several other places that the problem is present.
When I enter my password to get into Comcast webmail and when I enter a password containing either a number or special character in a prompt for accessing one of my network devices. Any problems with keyboard control after upgrading to win 8?
View 2 Replies
View Related
Apr 6, 2014
I was trying to activate the administrator account and a UAC message popped up telling em to enter administrator password and click yes but there was nowhere to enter password and the yes button is disabled out. I can't do anything on control panel neither because its not letting me. I have tried everything and nothing seems to work.
View 5 Replies
View Related
Jan 18, 2013
On a new Windows 8 Installation, I created a local non/domain user. The first user is the "magical" user.
Then I added the domain user and made sure it was an Administrator, both on the Metro settings and on the Desktop. At least, if I go in now and look, it claims to be an Administrator.
Then I joined the company domain and that seemed to work OK. And then I made the account a Microsoft Account type user.
Now, whenever I install a program, it wants Admin Credentials. I put in the Domain Admin credentials and that works to install the program. But this happens over and over again, as I am moving from Windows7 to Windows 8.
I read that any secondary users cannot install programs without being changed into an Administrator. Well, I did that, but it still does the same thing.
Since I am part ways through my switch to Windows 8, I would rather not start over again, if there is some way to fix this, although I don't want to disable UAC either. It just seems like I should be recognized as an Admin and yet I'm not.
View 1 Replies
View Related
Nov 7, 2013
I have four computers running Windows 8.1
On three the User Accounts dialog box has the phrase, "Users must enter a user name and password to use this computer." I have deselected that box and entered the passwords and now I log in automatically.
But on one computer in the User Accounts dialog box there is no phrase, "Users must enter..." and there is not box to deselect.
View 2 Replies
View Related
Aug 21, 2013
I am using Windows 8 64 Bit and have lost the password for the Administrator Account (Local). I am only able to login using the Standard Account and unable to create any more admin accounts or make any changes, I am even unable to perform the Gateway Recovery as its asking for the Administrator Password. I even can't enter the BIOS to disable the Fast Boot or change the First Boot to USB so that I can use any other Image of Windows 8 to reinstall.
View 2 Replies
View Related
Jul 19, 2013
I have a multiboot scenario set up on my laptop, and I'm using the Windows 8 Graphical Bootloader to manage my other operating systems. I need to install two programs, GBridge, and Synaptics Touchpad Installer, and both use unsigned drivers. It seems Windows 8 doesn't ask for confirmation to install unsigned drivers like previous versions of Windows, it just outright denies them without user consent.
As a solution, I figured I would go to advanced startup options and disable driver signature enforcement like I did *successfully* for my Windows 8 desktop, but after it reboots to enter advanced startup mode, it just goes straight into Windows! No matter how many times I tell it to enter advanced startup mode, it refuses to do it. I even tried removing all my multiboot options and it still goes straight into Windows without asking me what I want to do.
For the record, I've tried it these ways:
Charms Menu -> Settings -> Change PC Settings -> General -> (Advanced Startup Options) -> Reboot Now -> Troubleshoot -> Advanced Options -> Startup Settings -> Restart (What a pain in the ass to have to navigate all this crap btw)
Choose an OS -> Other Options -> Advanced Startup Options
From legacy boot menu -> F8 -> Advanced Startup Options
All these attempts and methods achieve the same result: a normal reboot without giving the options of what advanced startup I want.
View 4 Replies
View Related
Jul 31, 2014
I have a desktop with Windows 8 upgraded to 8.1, I can enter the BIOS setup by pressing the DEL key only when the preceding shutdown is a complete shutdown (shutdown with fast startup turned off).
If the desktop is shutdown with fast startup turned on (incomplete shutdown), and Windows cannot be loaded during the subsequent starting. How can I enter the BIOS to select to boot from a USB stick?
View 4 Replies
View Related
Sep 15, 2014
I had recently activated my Administrator's account on Windows 8. But I was tired of having to put in the password each time and I made it where it would bypass that by hitting the windows key plus the x key then clicking on the Command Prompt (Admin). I put in "control userpasswords2" and hit 'enter', then I unticked the box that says "Users must enter username and password to use this computer" then click apply and restarted my computer.
I need more privacy on my computer and I want to have it where people have to sign in with the user name and password to use my computer. But when I do all the same things and tick the box again that says users have to use the username and password etc... it doesn't seem to work. It still doesn't require my username and password.
View 1 Replies
View Related
Aug 22, 2013
How do I change settings to allow access without having to enter password everytime?
View 3 Replies
View Related
May 18, 2013
My machine won't fully shut down and it won't enter sleep mode without crashing. When I boot back up it gives me an error report and said that it didn't shut down properly. I tried doing a system restore to before this happened and it is still going on. I use a Crucial SSD for my OS, not sure if that could be the issue but I've used it without problems for about a year and half now.
View 3 Replies
View Related
Feb 24, 2014
I have a Gateway desktop computer about a year old. It had been working perfectly, but today when I restarted it, I got an error message saying " no boot disk has been detected or the disk has failed." At the bottom of the screen was a message saying to use the delete key to enter BIOS set up. I went into the bios set up, but didn't see anyway to check my hard drives...
View 5 Replies
View Related
Dec 1, 2013
My program and features list is emptied by malware but all programs are working normally. how do I re-entry the deleted (not uninstalled) programs' name in the control panel program and features?
View 4 Replies
View Related
Jun 6, 2014
I had a picture password, but it hid itself, since I got it wrong to many times. I do not have a pin password, regular password, password reset disc, and I cannot enter the bios. So my question is, how do I get to my picture password, without a the choice to enter my computer, since I forgot my password. Let me give the details. I go to my picture password, and get it wrong to many times, so it then closes the window and goes to the regular password screen, but there are no sign in options. But In the password settings it says the picture password is still there, so is the picture password hidden, deleted, or do you have to be in the password settings to get it back? I have forgotten my regular password, and do not have a pin password.
View 1 Replies
View Related
May 8, 2014
I have a CM6730 Asus PC with a P8H61-M PRO/CM6630 motherboard.
I was having problems getting good Graphics performance and the topic of Integrated vs discrete GPU came up, the options in the BIOS were set to use iGPU, since then I do not get the option on boot to enter the BIOS.
I have tried ASUS but they want me to send the unit in for repair.
My rig has Windows 8.1 fully updated.
View 9 Replies
View Related
Nov 8, 2012
I need to find out why my account randomly asks me to re-enter my password. They do seem random (i.e. not a set time interval, not after system changes, computer is not going to sleep mode, etc...) and I do not see any setting anywhere that would cause a system login to time-out. I am providing three screen shots of where it asks this when it happens and here is the text in case people need to search for this same problem in the future.
Text alerts:
"Click here to enter your most recent password"
"You need to sign in with your most recent Microsoft password"
Pics:
View 9 Replies
View Related
Jul 5, 2014
I can't enter my BIOS/UEFI after activating "MSI Fast Boot" in the BIOS/UEFI.
I read somewhere about "GO2BIOS",but my installation disk didn't came with that software.
MB: H81M-E34 (MSI Global H81M-E34)
View 2 Replies
View Related
Sep 15, 2014
I am facing a peculiar issues with my Vaio Machine. I use a Huwaei 3G E173 Modem for connecting Internet. I started using this in my new vaio machine too. Whenever I use the hibernate option, it tend to goto the last phase of Hibernation i.e the screen goes off, the fan starts screaming and after a moment it restarts. So, to be succinct, the new windows 8.1 machine doesn't enter in hibernation mode, if I have connected the modem. The modem has a CD Rom emulation for their proprietary software installation, so I thought it would be the cause and hence I tried to change Boot Options in UEFI BIOS to Primary, Secondary and Third as HDD, Network and External device from HDD, CD, Ext. Device.
I have also tried to disable that Power Management settings available in Driver Settings -> Hardware Settings and Un-tick the "Allow this device to Wake the computer"
P.S If I do not connect the computer to Internet with this modem and try to Hibernate it does the Job, when I use the Huwaei Modem only it creates the issue.
But nothing seems work out. Any resolution for this?
View 1 Replies
View Related
Aug 12, 2014
I tried booting up my PC which has Windows 8 installed and it was working fine until yesterday.
It has a "Enter Password" screen upon start-up and I think it's a virus because it only lets me enter 10 characters and even though, I do put in the correct password, it still says it's incorrect. The computer also shuts down after 3 unsuccessful attempts.
I have attached a picture of the screen.
View 2 Replies
View Related
Feb 8, 2013
When Windows 8 menu appears on start and I choose W7 - instead of loading W7directly , the computer is new-starting again and only than starts w7. That's a funny "behaviour"....
Also, after starting the computer, the menu is not directly shown up, first is this turning wi8 circle (like in the setup) and only about 30 sec. later comes the menu. I am using windows 8 enterprise, test version.
View 7 Replies
View Related
May 6, 2013
Have a question regarding "Local Account". I'm having problems connecting to the Win 8 laptop from Win 7 as it will not accept my sign in credentials. With that, am I to assume that this is because the credential aren't "Local", and thus this is what this is for???
It will not accept the "Microsoft" account I use to log into Win 8 laptop.
With that, if I choose to go with the "local account" can I easily switch back to the Microsoft one?
View 8 Replies
View Related
May 1, 2013
I had windows 7 and outlook express on it. The computer crashed. I had to get a whole new computer with windows 8 and just outlook. I have a folder with all my old outlook express emails in it but it is not compatible with outlook and I NEED an email in the old outlook express file. How the heck can I get this? When I try to open the old files it says " must be opened with outlook".
View 7 Replies
View Related
Jan 4, 2013
I have a few questions about dual booting windows 7 and windows 8 preinstalled (UEFI) on my Dell laptop.
1. Can I install a non-UEFI version of Windows 7 on my laptop, if so how?
2. Will installing a non-UEFI version of Windows 7 on my laptop break it?
3. Can I use EasyBCD for UEFI?
4. How do I create a UEFI windows 7?
View 3 Replies
View Related
Jul 2, 2013
In a few days I will receive a Lenovo Thinkpad X1 Carbon with Windows 8 installed. And separately I will receive an OEM Win7. Win7 is certainly what I intend to use, and I had originally thought I would wipe out Windows 8 and install Win7. But now I am wondering if I can somehow preserve Windows 8 for occasional use. (I would have ordered the machine with Win7 but this is a refurbished machine.)
I would rather not have to understand UEFI. (I'm sure it would be interesting, I just have other things to do with my time.) And, although I do it sometimes, and will if I have to, I do not like diddling with BIOS settings.
I know that factory installed operating systems generally can't be moved to other machines. And I fear that the factory installed Windows 8 that I will receive may not even tolerate being installed, e.g., in a smaller partition or under something like VMware (another complication I'd like to avoid).
View 4 Replies
View Related
