i have windows 8
in the instruction of my university vpn . they said i should enter UCSTAFF in domain(look at the step 7 in this instruction) but this instruction is for windows 7 and i could not find any way to enter domain in windows 8.
I had a similar issue when adding vista pro and W7 pro to a domain. I found I had to turn the UAC setting all the way off to have the VPN connections appear once the machine was connected to a domain.
Fast forward to Windows 8. Once the machine was connected to the domain can't see created VPN connections even after turning the UAC all the way off. I assume it is a GPO item I can change but I can't find any reference to what GPO or registry setting I should change to allow use of the VPN connections.
What I can change?
I brought my laptop to work and wanted to connect to my work's network so I could access our shared networks. In the past I was able to log into my work's domain, nahrc, with my user name and password via the ctrl+alt+dlt method fromt he log on screen. I can plug in the ethernet cable into my laptop, and the nahrc network appears in the wired connections area, but I can't seem to connect/access our shared drives. Is it possible to log into my laptop like you could in windows 7 and access my account, or is this just not possible anymore.
View 1 Replies View RelatedI have two computers:
LOFT
mapped network drives M, N, O
BEDROOM
mapped network drives P, Q, R
If I am on the LOFT computer i can see all mapped network drives, M,N,O,P,Q,R
if I am on the BEDROOM computer I can see mapped network drives P,Q,R but not M,N,O. I click on M,N,O and it comes up with a windows asking for login and password and states the following, "the system cannot contact a domain controller to service the authentication request, after I type in the info I can then see the drives.
On my laptop I have my microsoft account and everything set up and I have just started online schooling but when I go to the campus every few weeks i cant use their internet because i dont have a computer on their domain thing and I want to be able to join their domain but don't want it to affect my current setup.
So if i connect to their domain will it modify my current account or give them access to my current accounts files???
In our domain we have a policy to change the wallpaper every month. The change is done from server side. Now wallpaper of most of users is changed but for few it remains the old wallpaper.
For example I have windows 8 and mine is not updated. I also have tried gpupdate /force. No luck.
This issue is only with few systems running windows xp 7 and 8.
These systems only show the last months wallpaper not the one updated.
Also these windows are fully updated as of now.
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies View RelatedWe were sent some Surface Pro 2 Tablets at work. They were already setup with the programs we needed, however they were not behaving correctly. Kept getting network errors for the domain, as everything else on the network was working but that.
Apparently at least unjoins our domain, restarts, and now I cannot login for anything in this world. I cannot get any other user accounts to show up but the last person who logged in, who was an administrator on tablet under our domain, and the password simply does not work. I have tried restarting in safe mode with and without network and that doesn't work because it won't recognize the password for the user. So I thought system restore would work but apparently I need to login to the account to do that as well.
Also tried rebooting to the command prompt. I apparently need to login for that as well. I have tried rebooting into a password recovery/reset disc but I cannot get it to boot to the cd, or at least if it is, it's certainly not reading the disc (which I knows works for XP & 7). I cannot do a reset password usb because alas, I need to be able to login to be able to create one of those. I've looked at several online things but most of them start with "you need to be logged in".
I've just upgraded to 8.1.
I was always able to login as a different user and use my work network user credentials i.e. workgroupusername. On this version I can do this. I can only add users once logged in and switch between them on the login screen.
This version doesn't show the 'login with different user' link. I've looked around the settings, but haven't had any luck with getting it to appear on the login screen.
My computer is not hibernating after an upgrade to Windows 8.1:
C:WINDOWSsystem32>powercfg /a
The following sleep states are available on this system:
Standby (S1 S3)
Hibernate
Hybrid Sleep
Fast Startup
The following sleep states are not available on this system:
Standby (S2)
The system firmware does not support this standby state.
[Code] .....
Errors
USB Suspend:USB Device not Entering Selective Suspend. This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping. Device Name USB Root Hub Host Controller ID PCIVEN_1002&DEV_4396 Host Controller Location PCI bus 0, device 19, function 2 Device ID USBVID_1002&PID_4396 Port Path
[Code] .....
Warnings
Platform Timer Resolution:Platform Timer Resolution. The default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the timer resolution is increased, processor power management technologies may not be effective. The timer resolution may be increased due to multimedia playback or graphical animations. Current Timer Resolution (100ns units) 10000 Maximum Timer Period (100ns units) 156250
[Code] .....
Information
Platform Timer Resolution: Timer Request Stack. The stack of modules responsible for the lowest platform timer setting in this process. Requested Period 10000 Requesting Process ID 4252 Requesting Process Path DeviceHarddiskVolume2Program Files (x86)GoogleChromeApplicationchrome.exe Calling Module Stack DeviceHarddiskVolume2WindowsSysWOW64
tdll.dll DeviceHarddiskVolume2WindowsSysWOW64kernel32.dll DeviceHarddiskVolume2WindowsSysWOW64d3d9.dll
[Code] .....
It is hibernating now with those settings. It took another reboot for some reason.
I am running into a problem with newly upgraded windows 8 computers not being able to register DNS with our existing domain controller that is currently on server 2003.
I am getting the following error: The system failed to register host (A or AAAA) resource records (RRs) for network adapter with settings:
Adapter Name : {0D2F7524-B997-4850-BE6E-50B502FE46A8}
Host Name : ########
Primary Domain Suffix : #####.#######.com
DNS server list :
172.29.1.10, 172.29.1.12
Sent update to server : <?>
IP Address(es) :
172.29.5.145
The reason the system could not register these RRs was because of a security related problem. The cause of this could be (a) your computer does not have permissions to register and update the specific DNS domain name set for this adapter, or (b) there might have been a problem negotiating valid credentials with the DNS server during the processing of the update request.
You can manually retry DNS registration of the network adapter and its settings by typing 'ipconfig /registerdns' at the command prompt. If problems still persist, contact your DNS server or network systems administrator. See event details for specific error code information.
I blanked out the computer name and domain name.
How to enter the safe mode in windows8.1. Do NOT tell me pressing F8 when PC starts up .OK?
View 9 Replies View RelatedI am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
I've been trying to set up an old Savin 9033 printer through the company's router, but I couldn't find the network it's set up on from any other computer.
So I pull up Network & Sharing, see that Network Discovery is turned off.
I check it, go to click on "Save Changes" and nothing happens. I click it a few times and it kicks me back to the previous page, nothing saved. No password prompt or anything.
I double checked that all the appropriate services are running (DNS Client, SSDP Discovery, UPnP Device Host, Function Discoveryr Resource Publication, etc.) and made sure Network Discovery was allowed through Windows Firewall.
I am setting up an image to duplicate on our student laptops this year and have run into a strange problem. Our computers are on a Domain and the image works great but when a new user logs on with their Domain credentials, all of the stock active tiles are blank and unresponsive. We can have the student log out and back in and the tiles all work the second time. Same thing happens every time a new user logs on for the first time.
View 1 Replies View RelatedI installed windows 8 release preview on my Samsung Slate yesterday. When it asked me to enter a password, I didn't and continued. After the installation was complete, the system asks me for a password. I press enter but it says the pw is incorrect so I tried all my old passwords but to no avail. I cannot reinstall it because I'm unable to change the boot order from bios to my 32GB USB thumb drive as it is not letting me.
View 3 Replies View RelatedMy laptop (Latitude E6420) can't enter sleep mode either when I close the lid or select Sleep command from Start menu.It's a new hard drive with clean Windows 8.1 Pro.All latest drivers have been installed (downloaded right from Dell's site)
I tried to run powercfg /energy command as it's suggested on some web-site. It reported about 6 errors. First 5 of them are about USB suspend and the latest is about disabled PCI ASPM.Here you can download full report: [URL] .... Maybe I should re-install some drivers?
Trying Windows 8 at work and bought new Samsung 700t tablet. Windows 8 works fine with local user (linked to live id) and all our software including Symantec Endpoint 12.1.2. As soon as I join to domain (server 2008) and reboot the live tiles no longer function. Have total reset several times and tried refresh and restore points. My guess is that has to be default behavior of Win 8 GPO compared to 2008 domain GPO. We are very plain on our policies and so far have not found anything on local computer or GPO that can correct issues.
View 2 Replies View RelatedThis morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
I am trying to get file sharing to work with my win 8 machine and my OS X Server. The computers are on the same network with the same workgroup but I can't seem to connect. I was able to connect with the wife's win 7 home machine until I upgraded it to win 7 Ultimate now it wont connect either.
View 1 Replies View RelatedOkay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
I would like to make a folder share from a tablet with windows 8 with password protected to a laptop of windows 7 and another of vista. I have followed the tutorial of File Sharing - "Share with" & "Stop Sharing" in Windows 8. My PCs have been set in the same workgroup and same user account, network discovery and file and printer sharing turned on. At the first time, it is OK for windows 7. However after some changes of account (delete and create them on both windows 8 and windows 7), it doesn't work anymore with the error from windows 7 "Login failure: user has not been granted the requested logon type at this computer" whenever password protected turned on in windows 8 and only OK when password turned off.
View 1 Replies View RelatedI just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies View RelatedI re-installed Windows 8 yesterday evening (thought it would be quicker than to cleanup and fix my old install) and then directly upgraded it to Windows 8.1. The problem I am experiencing is quite weird: The Operating System doesn't detect the network cable.
With that being said, do not jump straight to the "Did you turn it on and off again" questions. Here is what I have done so far:
Hardware-Side: Cross-check the cable with another computer --> Working fineCross-check the wall plug with another computer --> Working fineTest the connection with the BIOS's connection diagnostic utility --> Link detected
Software-Side: Checking if Windows was up to date --> Nothing to updateUpdating the motherboard's BIOS --> Not betterUpdating the LAN's drivers with the ones I found on the manufacturer's website --> Not better
I am wondering what is wrong with my installation. It was working A1 a few days ago, except for the issues I re-installed the operating system for.
In my network 4 Desktop running windows XP all are connected LAN cable and my modem is tplink and 1 laptop running windows 8.1 pro accessing network through wireless in my laptop network place all the pcs are visible but I am not able to ping them and when I click I am getting message that Network path not found Error code 0x80070035
View 2 Replies View RelatedMy 8.1 laptop shows multiple network connections to my Samsung Smart TV --- One as "media connections" and 3 as "other connections". Both devices are on a simple wireless network using Linksys WRT54GS.
Under the "Network" page, most of the "Properties" of the TV connections are the same except for "Serial Number" and "Unique Identifier". Did I do something wrong when setting things up? Are these extra connections harmful? Should I delete some? How?
I purchased a new Windows 8, Inspiron 15 7000 series - 7537 last December. I had been using a router at a hotel for the time, and it worked correctly. When I arrived home, I had a Belkin router, and i experienced network issues in that i could not connect to the wifi. I could connect with Ethernet cable. The problem was fixed through customer support eventually, but I now have a new Comcast router, and i'm experiencing what appears to be the same or a similar issue. I can access the internet fine by wire. With wifi, it says i have access to the internet over the internet icon in the bottom right, but i cannot access webpages. I can use skype, and communicate through it.
Here is the result from the ipconfig /all :
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
[Code] .....
I really need the wifi on this router working for this laptop. Let me note that it works on other laptops, so it should be an issue with hardware or settings on this laptop.
With the following problem regarding media streaming in windows 8. Up until recently I could stream video films from my HP laptop & HP desktop onto the TV via DNLA.
After following several posts on various sites it seems that when I try to start the windows media player network in the services I get the error message "windows could not start the windows media player network sharing service on the local computer.
Error 1068. The dependency group failed to start."
In the dependencies tab in the lower box of the two "the following system components depend on this service"
The box is greyed out and the words no dependencies is displayed.
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
I upgraded to Windows 8.1 from Windows 8 and I can no longer see the files inside the folders on my networked drive. Before I upgraded I could see them, after the upgrade - not so much. The folders are fine, I can see them, just no files visible. There's no network issues as the files are visible from my Win7 machines and my wife's Windows 8 machine. All the standard default sharing and viewing settings are correct. Even if I put the direct path in File Explorer is tells me there's nothing there. I'm absolutely baffled. I have never seen this particular type of sharing issue before. I'm a pretty savvy Network Admin so the basic troubleshooting (and standard sharing settings) has been covered.
View 6 Replies View Related